Pdf content in other programs not working?

I've tried searching, but was not able to find much, so apologies if this has been discussed already.
Created an interactive pdf out of Indesign. Then, in Acrobat, added some web links around words, some around art. The links around text are underlined. Imported art (.pngs) that could be clicked (mouse over, up, down). Some basic stuff, nothing really fancy.
In acrobat and reader, it's all peachy. Everything looks and prints nice, and all links work. In Mozilla, the underlined words now have rectangles, and the imported art has no link, no mouse up/down look. In Foxit, the text links are fine, but the imported art looks washed out. In Internet Explorer, everything looks and works exactly as it should. Is there a check box I'm missing to make pdfs work universally in products, or should I put a notice that it is best viewed in Reader or IE? I know that not all programs are the same, and some people have their preferences set differently that what I may have.
Thank you.

By the way, do not ever save an interactive PDF with Preview and distribute it. Only work with the document within Acrobat. Preview causes all sorts of corruption. If you did save with Preview, don't bother trying to edit it in Acrobat and instead start from scratch if you don't have a copy as it was before it was saved with Preview.

Similar Messages

Outlook 2010 paste from other programs not working.

Hi,
Win 7 SP1 x86 w latest patches. Win lang. ENG
Outlook 2010 SP1 x86 w latest patches. Office lang. ENG
Regional (date/time and so on) settings EE (Estonia)
I have about 6 users with same conditions.
When I'm trying to copy - paste from other programs like IE9, Word, Excel I'm unable to paste into Outlook message body.
It just wont paste.
Typically, Outlook shows me "thniking circle" for a millisecond or rarely just hangs.
There are some exceptions:
1. I'm able to paste into To: field
2. I'm able to paste into Subject: field
3. I'm able to paste even into body if I copied text from Notepad.
4. I'm able to paste into body when I copied text from another email.
Additional information:
Outlook default message format "Plain text" (Rich text, HTML - does'nt matter)
What I'v tried so far and results:
1. Repair Office installation trough "Programs and features" - NO LUCK
2. Changed default paste behaviour from other programs to "keep text only" - NO LUCK
3. Used SAFE MODE - this helps, paste SEEMS WORKING correctly. Based on my knowledge, SAFE mode mainly disables Add-ins. OK.
Disabled all Add-ins in normal mode so Outlook shows that "No Active Application Add-Ins" - NO LUCK
So, I'm out of ideas. I think that this problem starts after installing Office 2010 SP1
I don't want to uninstall SP1 because for me it's not a solution (SP1 won't dissapear from the list of updates), ok.. agree, it may be
temporary solution but at the end of the day, there must be something else.
Any ideas?
rgds Sven

Rename normailemail.dotm to .old when Outlook is closed and see if it works now.
You can find the file here;
C:\Users\%username%\AppData\Roaming\Microsoft\Templates
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info
Thanx, NormalEmail.dotm did not do anything for me but the renaming the Normal.dotm in the same folder did the trick for me. I can paste links again into outlook :)
Win7 SP1 and Outlook 2010 32bit

Mail, Settings, iChat and other programs not working since 10.6.2 update

Since the 10.6.2 update some programs can't be opened any more.
They have a special sign on the program icon. The error message says something like:
The program "Preview" can not be opened because this type is not supported from a mac computer.
Thanks for your help!

in the package contents it says:
<dict>
<key>BuildVersion</key>
<string>4</string>
<key>CFBundleShortVersionString</key>
<string>5.0.1</string>
<key>CFBundleVersion</key>
<string>503</string>
<key>ProjectName</key>
<string>Preview</string>
<key>SourceVersion</key>
<string>5030000</string>
</dict>
</plist>
i didn't restore any older files.

Exporting from PDF to Word 2010 is not working in Acrobat 8

Exporting from PDF to Word 2010 is not working in Acrobat 8. I'm getting the following errors/messages. Any suggestions?
The instruction at “0x29034c05” referenced memory at “0x0000030”. The memory could not be “written”.
Click OK to terminate the program
Click onCANCEL to debug the program
Runtime Error!
Program: C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrobat.exe
R6025
-pure virtual function call

Not supported by Acrobat 8. Supported by Acrobat X.
Be well...

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

Mail program not working since upgrading to Leopard 10.5.6

We have loaded the new Leopard system now twice, and both times the Mail program fails to launch from the taskbar, but stays open in the background. The program will not close, and fails to open to even try to check email. It seems other programs are working just fine, but nothing right with Mail. Anyone know if there is a fix to this?
Thanks,
lldowney

Hello, and welcome to the Discussions.
While the other poster's cited article references certain issues with 10.5.6, they are when updating a system that was already on Leopard. If, as it appears, you were Upgrading an earlier version of OSX, such as 10.4.11, then the relevant article is:
http://support.apple.com/kb/TS2537
Where an even earlier OSX than Tiger once generated the Mail folder, two other MessageSorting files will need to be removed, also.
Ernie

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e

I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

'Program not working' - panorama

When I attempt to create a panorama using Photoshop Elements 9 on my recently purchased Windows 8.1 pc I get a message saying 'Program not Working' and I have to close the editor. This function was ok on my old Windows XP pc. Can anyone help?

First, quit the editor, then restart it while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do. Note that if you have set the welcome screen to automatically open the editor, it won't work from that shortcut. Use the actual .exe/application file or the buttons in the organizer or on the welcome screen.

Converting WordPerfect to PDF with desktop printer tool: Not working

I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
    Re: Converting WordPerfect to PDF with desktop printer tool: Not working
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My adobe is not working with Windows 7 it says "program not working"

My adobe does not worked with I have tried 9 & 10 both versions. It does not seem to work with Windows 7.

Adobe Reader X works very well on Windows 7.
Please give us the exact error message you're getting; "program not working" is not a message that Windows or Adobe Reader would issue.

Added preset motions to my interactive pdf file. It's not working when I export my file as an inter

I added preset motions to my interactive pdf file. It's not working when I export my file as an interactive pdf. It's working when I play it on the Preview panel. I must not be doing something right. Does anybody have any clue what I need to do to have my presets motions work when played on Acrobat

So do you mean export the whole document in a swf file format and then bring the whole swf file in and save it as a pdf file. Is there way to export these motion presets seperately and bring them back into Indesign. I wish it was less difficult but I guess there is no way around it for the time being.

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac? No

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac?
Marquees not showing, works perfectly fine on PC IE 9.
Can edit text put cannot duplicate regions?
Can anyone advise? Not good if the client worjs on Mac.

Marquees the HTML tag? It's the most hated HTML tag out there, most browsers removed it because it was such a pain to see in 1996 scrolling images and scrolling everything

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

Hi, I can't update my Photoshop in the CC. all other programs are working fine with the updates. only photoshop isn't. I've already tried to uninstall, and install again and it didn't work.

Hi, I can't update my Photoshop in the CC. all other programs are working fine with the updates. only photoshop isn't. I've already tried to uninstall, and install again and it didn't work.

Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

After upgrading to maverick; help & other functions not working

After upgrading to maverick; help and other functions not working?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Pdf content in other programs not working?

Similar Messages

Maybe you are looking for