PDF Encryption using CONTROL File in EBIZ R12 & Decrypting the PDF

Hi All,
We are using BI Publisher BURSTING with R12 ebiz.
We have a requirement to encrypt the file while generating to the filesystem.Then when viewing the File from OAF they went to decrypt before showing to the user.
As per the Documentation , there are some attributes like pdf-security and encryption level .
a) Can we set these attributes in control file while using with R12 ? Is there any documentation available for the same ?
b) Once we encrypt the file , Can we decrypt the file also , any documentation available for the same ??
Regards,
Vamsee.

I can't recommend a solution for that. Tell your management team that this is unnecessary. The file system should be secure, if it's not someone on your unix admin team is in big trouble......
I mean based on that logic all output files should be secured. By the way OAF is secure too so this really unnecessary as well. If the files need to be secured by a particular user, encryption is still a bad idea. You should just generate a relevant report for the user. Thats how we do security in the apps my friend.

Similar Messages

  • How to load data using Control File in BW 7

    Hi All,
    I have a requirement to load data in BW using control file. The development is done in in BW 7.0. In BW 3.5 in infopackage, there is an option of FILE IS ( Control File or Data File ). Please suggest how to simulate the same in BW 7.0
    Regards,
    Vikram

    Any suggestions?

  • Use Control File to load data in BW7.0

    Hi All,
    I have a requirement to load data in BW using control file. The development is done in in BW 7.0. In BW 3.5 there is an option of FILE IS ( Control File or Data File ). Please suggest how to simulate the same in BW 7.0
    Regards,
    Vikram

    Hi Vikram,
    Please have the contents of a sample control file. The file should be saved as ".TXT".
    FILENAME = C:\test.csv
    FILETYPE = CSV
    LOCATION = C
    FS = ,
    ESCAPE = "
    DECIMALPOINT = ,
    1000SEPARATOR = .
    RECCOUNT = 8
    RECSIZE = 53
    PACKETSIZE = 1000
    Filename should contain the path of the CSV file
    Filetype is CSV
    location is 'C' for Workstation and 'A' for Application Server
    FS contains field seperator ',' in our case
    RECCOUNT contain the Rec. Count
    RECSIZE is the Max DB size of the a single row ( this can be evaluated by the Total DB Size of a single Line of the Target BW Structure as well ).
    The content of my sample test.csv are
    1234567890,10,9999999999,,,15,01/01/2005
    1234567891,20,9999999999,,,30,01/01/2005
    1234567892,30,9999999999,,,0,01/01/2005
    1234567893,10,9999999999,,,5,01/01/2005
    1234567894,20,9999999999,,,6,01/01/2005
    1234567895,40,9999999999,,,10,01/01/2005
    1234567896,10,9999999999,,,5,02/01/2005
    1234567897,20,9999999999,,,6,02/01/2005
    Please let me know if there are any further concerns.
    Regards,
    Shrey
    Edited by: Shrey SAP BI on Mar 8, 2010 4:13 PM

  • SAP BW 7.0 - How to use control file?

    Hello experts,
    In my current project, I need to use a control file to load some flat files into BW.
    In version 3.5 we had a option in the infopackage where we could select if it was a csv or a control file.
    But in 7.0 version this option is not available anymore.
    I found this threat: Use Control File to load data in BW7.0
    But a .txt control file didn't work. Can somebody help me?
    Thanks!!!

    WS adapter can be used as Direct connection or Integrated Server Communication.  Basically this adapter will be used to make communication between two SAP System's Webservice runtime. WS adapter supports Webservice reliable messaging , SAML and more security features.  Using Direct connection you can communicate two SAP systems. In this case, you dont need any ESR objects and you just need to configure ID objects only.
    Have seen this [link|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce28613a8e5430e10000000a42189b/content.htm]
    Hope that helps

  • Javax.mail.internet.ParseException while busrting report using control file

    Hi everyone...
    I am trying to run a concurrent program that will burst emails using a control file.
    In the data definition i want to use few parameters whose values will be passed from concurrent program.In the data definition i am calling an after report trigger function which will fire the seeded email bursting program.
    My data definition file sample:
    ?xml version="1.0" encoding="UTF-8" ?>
    <dataTemplate name="dataTemplateName" description="Template description" defaultPackage="BIREPORTBURSTINGAK_PKG" version="1.0">
    <parameters>
    <parameter name="P_NAME" dataType="varchar"/>
    </parameters>
    <dataQuery>
    <sqlStatement name="Q1">
    <![CDATA[
    select
         emp_Id "EmployeeId"
         ,emp_Name "EmployeeName"
         ,emp_Dept "Department"
         ,emp_Org "Organization"
         ,emp_Email "Email"
         ,emp_salary "Salary"
         --,emp_Phone "Phone"
         from reportSample_AK
         where emp_name=:P_NAME
    ]]>
    </sqlStatement>
    </dataQuery>
    <dataTrigger name="afterReportTrigger" source="BIREPORTBURSTINGAK_PKG.afterReportTrigger(:P_NAME)" />
    <dataStructure>
    <group name="G_EMPLOYEE" source="Q1">
    <element name = "EMPID" value="EmployeeId"/>
    <element name = "ENAME" value="EmployeeName"/>
    <element name = "DEPT" value="Department"/>
    <element name = "ORG" value="Organization"/>
    <element name = "EMAIL" value="Email"/>
    <element name = "SAL" value="Salary"/>
    --<element name = "PHONE" value="Phone"/>
    </group>
    </dataStructure>
    </dataTemplate>
    my control file:
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
    <xapi:request select="/DATATEMPLATENAME/LIST_G_EMPLOYEE/G_EMPLOYEE">
    <xapi:delivery>
    <xapi:email id="123" server="agni.bangalore.bedford.local" port="25" from="[email protected]" reply-to="[email protected]">
    <xapi:message id="123" to="${EMAIL}" attachment="true" subject=" Dear: ${ENAME}">
    Please review the attachment .
    Regards,Anupama karote
    </xapi:message>
    </xapi:email>
    </xapi:delivery>
    <xapi:document output-type="pdf " delivery="123">
    <xapi:template type="rtf" location="/usr/tmp/TESTMAIL_AK.rtf" filter=".//LIST_G_EMPLOYEE">
    </xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    my package deatils:
    create or replace package BIREPORTBURSTINGAK_PKG
    As
    P_NAME varchar2(16);
    Function Afterreporttrigger(P_NAME varchar2) Return Boolean;
    end biReportBurstingAK_pkg;
    create or replace package body BIREPORTBURSTINGAK_PKG AS
    Function Afterreporttrigger(P_NAME varchar2) Return Boolean
    is
    v_request_id NUMBER;
    BEGIN
    v_request_id := fnd_request.submit_request('XDO'
    ,'XDOBURSTREP'
    ,NULL
    ,NULL
    ,FALSE
    ,'N'
    ,TO_CHAR(fnd_global.conc_request_id)
    ,'Yes'
    return true;
    End Afterreporttrigger;
    end biReportBurstingAK_pkg;
    i have created data definition and template and attched it to the concurrent program via bi publisher.
    While running the main concurrent program i am getting the following error:
    create or replace package BIREPORTBURSTINGAK_PKG
    As
    P_NAME varchar2(16);
    Function Afterreporttrigger(P_NAME varchar2) Return Boolean;
    end biReportBurstingAK_pkg;
    create or replace package body BIREPORTBURSTINGAK_PKG AS
    Function Afterreporttrigger(P_NAME varchar2) Return Boolean
    is
    v_request_id NUMBER;
    BEGIN
    v_request_id := fnd_request.submit_request('XDO'
    ,'XDOBURSTREP'
    ,NULL
    ,NULL
    ,FALSE
    ,'N'
    ,TO_CHAR(fnd_global.conc_request_id)
    ,'Yes'
    return true;
    End Afterreporttrigger;
    end biReportBurstingAK_pkg;
    Any help is greatly appreciated.
    Regards,

    Am also facing the same issue. Did anyone find a resolution for this problem?
    Regards
    Anoop

  • How to delete a single data from table using control file

    I want delete a single row data from table using sql loder control file
    Edited by: 977940 on Dec 19, 2012 9:00 PM

    977940 wrote:
    I want delete a single row data from table using sql loder control file
    Edited by: 977940 on Dec 19, 2012 9:00 PMWhy?
    And how do you imagine this happening with sqlloader?
    The entire purpose of sqlloader is to load data (hence, the name sql*loader*) into a table from an external source. If you want to delete rows from a table, you use the sql DELETE statement.
    What is the business problem you are trying to solve?

  • Data not viewable in table using Control file  CharacterSet AL32UTF8

    i have a flat file which contains Chinese characters and English Characters
    I have to create a control file, to insert the data in this flat file to the Table
    The characterset i am using in my control file is AL32UTF8
    When i use this characterset the data is getting loaded into the table,but i am not able to view the Chinese characters.
    i am able to see some Upside down question mark symbol
    Please help me of how to view the chinese characters into the table
    Is that any other characterset i have to set in Control file

    NLS_LANG is an environment variable. I'm assuming you're on Windows, so it's probably something like
    Control Panel | System | Advanced | Environment Variables
    Given that you're using Toad, though, there may be someplace there where you set the character set. There is a discussion on Eddie Awad's blog on how various tools can be made to display Unicode data
    http://awads.net/wp/2006/07/06/sql-developer-and-utf8/
    Some of the comments discuss Toad, though that's not a tool I'm familiar with.
    If you happen to be able to use iSQL*Plus, since that's browser based, it supports unicode natively. That's often the easiest solution.
    Justin

  • RECREATE DATABASE Using CONTROL File After SUSPEND Database

    Hello All,
    Does someone can tell me if he does achieve recreating a database using "Backup Control File" after putting database in "suspend" mode?
    The procedure looks like this :
    1 - Alter DATABASE Suspend
    2 - A Snapshot of the filesystem where the oracle datafile are located
    3 - Copy of those files to another file systeme
    4 - Startup setting a new database name
    Does someone as do it successfully ?
    Thanks for your answer

    Carlos,
    I tried to do it without putting the tablespaces in backup mode and it didn't work for me. At that time adding the backup mode wasn't a big deal for me, so I didn't investigate the problem thoroughly.
    Logically thinking you sould be able to do:
    1. suspend database
    the SCNs recored in datafiles headers could be incosistent at this point
    2. make a snapshot
    3. mount the backup database
    4. run recover until cancel using backup controlfile - I don't think you can avoid this step in case if you have inconsistent SCNs in the datafiles headers - you'll need to synchronize them
    5. open resetlogs.
    the suspend database should eliminate the possibility of inconsistent data within a block during the backup.
    Just out of curiosity - why don't you want to put the tablespace in the backup mode?
    Mike

  • RMAN backups running slow with Catalog , Running fine using control file.

    I am facing a weird scenario
    RMAN backups are running fine with Control file but are failing using Catalog
    There are other databases configured on the same catalog and they are running fine leaves us to suspect this is issue with Database.
    Can you please suggest what need to be checked in such scenario
    DB: 11.2.0.2
    OS: Aix 6.1
    Catalog : 11.2.0.2

    Hi,
    Basically its not only with backups, simple list incarnation also taking a lot of timeDo sql tracing on your catalog session and target db session while running the 'list incarnation' command for your problem dbs and a normal dbs.
    Regards,
    Tycho

  • Can I use mp3 files from different domain as the feed?

    Hi..
    I have just created a new podcast here:
    http://artistsofliving.com/?feed=podcast
    I would like to submit the podcast to iTunes sometime soon...
    However, I'm wondering if they will reject it because the feed lives on 'artistsofliving.com', whereas I keep the media mp3 files on 'livinginthepresent.com'... a different domain.
    I own the mp3 content and both domains- I'm splitting the media from the website for bandwidth reasons.
    Is this ok? If this causes a rejection straight out is there a way to indicate that I own the material fairly?
    Thanks!
    -rich

    There's no problem about using media files from any source: the feed just has to reference them (the URLs have to be 'absolute' - i.e. including the http:// and the server name - even if the file is on the same server as the feed anyway). I don't see the fact that some files have different URLs leading to accusations of copyright breach.

  • Can i use DLL file created by Fortran with the call libary function node

    Can i use a DLL created by Fortran (Compaq Visual Fortran) with the call library function node in labview. If yes how do i create the DLL file if i have the Fortran code.
    Thanks

    Yes! Maybe these old post will help:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=88786
    http://forums.ni.com/ni/board/message?board.id=170&message.id=109150
    Good luck!
    Message Edited by altenbach on 03-21-2006 02:35 PM
    LabVIEW Champion . Do more with less code and in less time .

  • If I expand a web page using Control +, how can I make sure the next page I go to on that site will also be in expanded mode, and the 1st page will still be in expanded mode when I come back to it? This is automatic in Chrome browser.

    Right now the pages always revert to small size. It's a hassle having to expand them every time to make them readable for my vision-impaired eyes.

    Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

  • Need a help: how to recover using backup control file?

    Please a help:
    First computer
    1. I create a database
    2. put it in archive mode,
    3. shutdown and made a cold backup
    4. Created backup control file (alter database backup control file to trace)
    5. I started up and created some archived log files.
    Second Computer
    1. I copied all files created in the step 3 above except the control file
    2. I create all the same map directory on the 2nd computer as in the 1st computer
    3. I recreate the control file from the script got in the step 4 above
    4. I Copy archived log files generated at the step 5 in the local directory in the second computer
    5. I set the logsource and set the autorecovery to on
    6. I recover the database: RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL
    Error got:
    the archived log file applied do not go beyond the first one?,How could I do to applied all archived log files copied from the first computer to the second computer to have the same data?
    Thank you very much

    archived log sequeces in the first computerSQL> select sequence#,first_change#,next_change# from v$log_history;
    SEQUENCE# FIRST_CHANGE# NEXT_CHANGE#
    1 553723 555484
    2 555484 557345
    Actions I did in the second Computer(after copied the former two archived log files from the 1st computer)
    SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
    2 MAXLOGFILES 16
    3 MAXLOGMEMBERS 3
    4 MAXDATAFILES 100
    5 MAXINSTANCES 8
    6 MAXLOGHISTORY 292
    7 LOGFILE
    8 GROUP 1 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG' SIZE 50M,
    9 GROUP 2 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG' SIZE 50M,
    10 GROUP 3 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG' SIZE 50M
    11 -- STANDBY LOGFILE
    12 DATAFILE
    13 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF',
    14 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF',
    15 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF',
    16 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF'
    17 CHARACTER SET WE8ISO8859P1
    18 ;
    Control file created.
    SQL> archive log list;
    Database log mode Archive Mode
    Automatic archival Disabled
    Archive destination USE_DB_RECOVERY_FILE_DEST
    Oldest online log sequence 0
    Next log sequence to archive 0
    Current log sequence 0
    SQL> alter database archivelog;
    Database altered.
    SQL> set logsource C:\local_destination1_orcl
    SQL> set autorecovery on;
    SQL> recover database using backup controlfile until cancel;
    ORA-00279: change 555611 generated at 01/18/2007 14:14:14 needed for thread 1
    ORA-00289: suggestion :
    C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC
    ORA-00280: change 555611 for thread 1 is in sequence #1
    ORA-00328: archived log ends at change 555483, need later change 555611
    ORA-00334: archived log:
    'C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC'
    Idon't know where the change 555611 is coming from?

  • How to use Conditional statements in SQL Loader control file

    Hi,
    I am using sql loader to load a flat file to the table. I am using control file for this purpose as show below:
    LOAD
    INTO TABLE store_shrink
    TRUNCATE
    FIELDS TERMINATED BY "     "
    TRAILING NULLCOLS
    SITE_ID char,
    ST_SHRINK char,
    ST_REVENUE char,
    SHRINK_PR char ":ST_SHRINK/:ST_REVENUE"
    My question is this. If in the flat file the value of 'ST_REVENUE' is '0', then I want 'SHRINK_PR' to be '0' as well, and skip the calculation (:st_shrink/:st_revenue).
    How to achieve this with the conditional statement or using any Oracle function?
    Any help or suggestion is greatly appreciated.
    Thanks in advance.

    Hi there,
    I tried the following in my above query and it doesn't work somehow. Anyone has an idea? I have been on internet throughout but to no avail. Please help:
    LOAD
    INTO TABLE store_shrink
    TRUNCATE
    FIELDS TERMINATED BY "     "
    TRAILING NULLCOLS
    SITE_ID char,
    ST_SHRINK char,
    ST_REVENUE char,
    SHRINK_PR char "case (when :st_revenue<>'0.00' then :SHRINK_PR=:ST_SHRINK/:ST_REVENUE else :SHRINK_PR='0.00') end"
    )

  • Using translate for date in the control file !!

    Hi,
    I am having data file where in i expect date but get non-numeric character.
    I am generating control file dynamically (programatically).
    While creating control file i know that here the type of data will be date so i put datatype as date. But at one place i got non numeric character instead of date.
    Now i want to put somekind of logic built in my dynamic generation which will check whether if value within that column is character then make it null and then load data. And if it is numeric keep it as it it.
    i.e.
    if(non-numericChars)
    make value null before loading.
    else
    keep the value as it and then load it.
    I heard that with translate function we can do that. Right ?
    So if i have a line like this in my control file:
    column_Name date "MM/DD/YYYY HH:MI:SS AM"
    How should i write the above statement to put the above mentioned logic.
    Any help would be highly appreciated.
    Regards,
    Dipesh

    and Perhaps TO_DATE can help you :
    TO_DATE
    Syntax
    to_date::=
    Text description of to_date
    Purpose
    TO_DATE converts char of CHAR, VARCHAR2, NCHAR, or NVARCHAR2 datatype to a value of DATE datatype. The fmt is a date format specifying the format of char. If you omit fmt, then char must be in the default date format. If fmt is 'J', for Julian, then char must be an integer.
    Note:
    This function does not convert data to any of the other datetime datatypes. For information on other datetime conversions, please refer to TO_TIMESTAMP, TO_TIMESTAMP_TZ, TO_DSINTERVAL, and "TO_YMINTERVAL".
    The default date format is determined implicitly by the NLS_TERRITORY initialization parameter, or can be set explicitly by the NLS_DATE_FORMAT parameter.
    The 'nlsparam' has the same purpose in this function as in the TO_CHAR function for date conversion.
    Do not use the TO_DATE function with a DATE value for the char argument. The first two digits of the returned DATE value can differ from the original char, depending on fmt or the default date format.
    Note:
    This function does not support CLOB data directly. However, CLOBs can be passed in as arguments through implicit data conversion. Please refer to "Datatype Comparison Rules" for more information.
    See Also:
    "Date Format Models"
    Examples
    The following example converts a character string into a date:
    SELECT TO_DATE(
    'January 15, 1989, 11:00 A.M.',
    'Month dd, YYYY, HH:MI A.M.',
    'NLS_DATE_LANGUAGE = American')
    FROM DUAL;
    TO_DATE('
    15-JAN-89
    The value returned reflects the default date format if the NLS_TERRITORY parameter is set to 'AMERICA'. Different NLS_TERRITORY values result in different default date formats:
    ALTER SESSION SET NLS_TERRITORY = 'KOREAN';
    SELECT TO_DATE(
    'January 15, 1989, 11:00 A.M.',
    'Month dd, YYYY, HH:MI A.M.',
    'NLS_DATE_LANGUAGE = American')
    FROM DUAL;
    TO_DATE(
    89/01/15
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions137a.htm#SQLRF06132
    Joel P�rez

Maybe you are looking for