PDFMaker navigation and magnification defaults - can they be altered?

When I create a pdf using PDFMaker in a Word file, I want the resulting pdf file to default to Magnification "Fit Page" and Navigation Tab "Bookmarks Panel and Page". I do not want to have to change the magnification or the navigation manually because when I am combining multiple pdf files, I end up having to set the mag and nav for every document inside the combined doc, even if the original pdf has already been altered to the mag/nav I want. Is this even possible?

Short answer = nope.
Your success path? Use Acrobat to post-process as needed.
Be well...

Similar Messages

  • Title Font Defaults - Can they be Changed?

    I do not like the default font and size on the Title pane I have chosen. Can these be defaulted to something else? If so, how do I change for the entire project versus having to change each clip?

    Welcome to the  Discussion Forums.
    Not done this for a while but I think once you change the font, next time you open a title it sticks. Can't be absolutely sure but either way it still means you'll need to change all those done already, manually one by one.

  • HT4528 i need to make sure that my phone is completely priviate.  My sons father has an iphone also and they know my apple id and passowd.  Can they see all my stuff on my phone and can they connect to icloud

    I need to make sure that no one can see anything on my iphone.  My sons father knows my apple id and password and I am worried he is able to use icloud etc.  Please help

    They will be able to log into iCloud for your contacts. They will also be able to set up another iPhone with your Apple ID and look at photos stored on your photo stream and intercept iMessages as well as purchasing apps and charge them to your stored card.
    Change your Apple ID password and the password for the associated email address and change the challenge questions

  • Can I walk into an Apple store and have them evaluate my current IPad 2 to see if I'm eligible for a newer version, and if yes can they transfer all the stuff that's on it to the newer version?

    I just wanted to know if I went on site to a store if they could evaluate it and see if I could get a discount?
    I have usb cable power cord and cover for it too.

    Hi,
    I also recommend gazelle.com. I've been pricing many to sell electronics we no longer use and gazelle seems best for me.
    If you are trying to buy the ipad air, they're new, so I know you know there are no 'deals' to be had. But if you're thinking of buying an ipad 4, please consider this which I just sent to another poster with a refurbed ipad question. I wrote -
    [I strongly suggest that you buy your refurb ipad directly from the Apple online refurb store. We bought two last Summer - 2012. They have been great.
    All refurbed ipads come with a brand new front and back cover, a brand new battery and a full one year warranty, including the 90 days of phone support. They come in a box and include the charger, just like a brand new ipad. It just says refurbished near the bottom of he box. If you buy from other retailers, even authorized resellers, their own rules apply and they will not have been refurbished by Apple. Also, in most cases, you only get the remainder of the warranty that the original owner did not use.
    The great thing is you might consider increasing your gb space for still less than the cost of a new one. They are a bargain right now.
    If you decide on what you want, check the certified refurb store and order it fast. Because they are on the site when available, they can come and go. Some are back the same day and some can take weeks. Shipping is fast and free in the USA.
    After the intro of the ipad Air, the ipad 4 refurbed price came down another $30.00. I don't expect that to change anytime soon.
    Whatever you decide to buy, enjoy.]
    Hope this helps.

  • Lost Logic Pro Serial Number and Install Disks, can they be replaced?

    I accidentally threw out my install disks and manuals (including the booklet with the serial number) for Logic Pro 8! I believe have registered this product. I think I can simply download the installation files but I will need the SN#. Is my serial number linked to my apple account? Can I find this online somewhere?
    I also use pro tools and there is a special section on the website just for this type of thing. I am hoping there is the same kind of thing with apple but I can't seem to find it anywhere.
    Thanks in advance for your ultimate awesomeness in helping resolve this issue for me and the rest of the idiots :}

    Have you searched this forum? The question comes up every three or four days.
    You can call up Apple and provide them with valid proof of purchase, and they will provide you with a new code.
    They'll probably send you disks as well, for a fee.
    I severely doubt that an official download is an option, as the whole package is somewhere around 45GB.

  • Office Pro 2003 and 2007: How can they coexist without "reconfigu​ring" each time?

    On my ThinkPad R61 running XP Professional, I had installed Office 2007 Professional. Today, I installed Office 2003 Professional so I could use a more familiar interface when desired. When I go back and forth between "years" in Excel, PowerPoint, or Publish, all is well. But when I go back and forth between years in Word or Access, Office insists on configuring that application anew. I don't know whether Outlook  would share this problem, for I chose not to install Outlook 2003.
    As nuisances go, the reconfiguring is minor, taking all of 30 seconds. Nonetheless, I'd be grateful is someone could suggest how I might reinstall one suite or the other to avoid this conflict...while retaining my "rights" to fully use each suite. (I haven't yet activated 2003 online.)
    Thinkpad W500, Windows 7 Ultimate, ATI graphics (home); ThinkPad E531, Windows 7 Enterprise, Intel graphics (work)

    Maybe this helps: http://support.microsoft.com/default.aspx/kb/92809​1

  • Lightroom and CS3 Bridge: Can they read eachother's adjustment settings?

    So Im trying to use Lightroom 1.0
    So far it seems like LR doesnt see the adjustments (XMP data) I have added to RAW files in Bridge and Bridge doesnt see the adjustments I make in LR.
    Call me crazy but isnt that a major stumbling block in the usage of Lightroom?
    Or am I doing something wrong?

    I don't use RAW files, but in the case of Jpegs, Bridge has a cache. You have to empty its cache for it to see changes in the files that it didn't make. And to have them made, you have to tell Lightroom to write out the metadata. Globally, it's in Preferences / File Management. It slowed it down so I have it off. If you want to do a file or a directory, you can use Metadata / XMP / Export XMP metadata to file.
    If you write metadata outside of Lightroom (I write capture date and digitized date to files from scanned slides), in Lightroom you have to do Metadata / XMP / Import XMP metadata to file. I always have Lightroom write out the metadata before I fiddle with the files and I would assume that is necessary because otherwise what it reads from the files will not include its data and it will, I presume, lose its data.

  • I wanted to transfer apps from ipad to iphone, eg 1password.   Unfortunately, following the syncing process, the apps have been transferred but can't get into them and if I can, they don't have the contents in them, they're just the empty app!

    Can you advise how I can sync apps from ipad to iphone without losing data.

    Data does not sync between devices, so you can't do what you want to accomplish.
    If you want to sync 1Password, then install it on both devices and use it's iCloud sync feature.

  • What are the network restrictions for a Tuxedo MP configuration between the Master and Backup?  Can they be on separate networks?

    We are migrating from one data center to another and want to keep 100% uptime during the process.  The two data centers are on separate networks but in the same city.  I want to migrate the Master and the Backup to the new data center with zero downtime. 

    Hi Harvey,
    Tuxedo machines just need TCP/IP connectivity.  So machines can be in different subnets, different Ethernets, etc.  I know of one customer that has a 13 machine MP configuration that is distributed across the entire country.  So as long as there is a route between the machines, you should be fine.  Here's an old but probably useful white paper on bridges, multiple networks, etc., from Aurora Information Systems:  "Exploring High Availability Issues with BEA Tuxedo and Third Party High Availability Software".  While it's a pretty old white paper, from what I can see most of it is still applicable.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect
    PS  You should write some articles about what you've been up to and how you've accomplished it!

  • Challenge:  Verizon Broadband and Aiport Express; can they play together?

    My only access to the internet is through VZ broadband which currently uses my phone as a modem (not elegant, but it works).
    My goal is to print wirelessly from my mac (all printers are currently connected to PC), stream music from my mac to the stereo and have internet throughout the house without having to drag my phone/modem everywhere.
    I thought Airport Express was the perfect solution, but since I don't have a DSL/cable modem, there's nothing for me to plug my ethernet into.
    What's the simplest way to get there from here?

    The answer to your first question is "yes." You'll simply run a cable from the Express' minijack to your stereo's inputs and then use OSX 10.5's Admin Utility to set up the Extreme N and Express as a WDS, with the Extreme serving as the main base station and the Express serving as a remote station. (You could reverse these roles, but you indicate you want to retain the Extreme as your main base station, possibly because its nearest your Ethernet cable.) A possible added benefit may be improved signal strength throughout your home -- any 802.11-equipped computers you have will be able to connect to whichever station provides the better signal.
    From what I've read elsewhere in this forum, it will be best to ensure the Express is also the newest, N version to preserve the added range/bandwidth of the 802.11n spec and maximize reliability. You'll want to use the Extreme's "extend network" option when creating the WDS and choose between communicating at 2.4 vs. 5 GHz. Prior discussions have indicated that 2.4 GHz yields better range and 5 GHz yields better bandwidth, but there's no substitute for trying both and choosing what works best for you.
    I've no experience with iPhones, so I'll leave it to someone else to answer your second question.

  • Bluetooth Keyboard and Blackberry 8830 - Can they pair?

    I have a co-worker with a Blackberry 8830 and he is looking for information regarding pairing that with an Apple BT keyboard. In fact, he already purchased one and has asked me to try and make it work. I have had NO luck, obviously.
    I believe at least one of the problems to be the fact that the BT keyboard uses an 8-digit rotating key for the pairing. Is there a "backdoor" key that will always work on these keyboards? I'm mentally answering this question even as I type it...probably not.
    Anyway, if anyone has worked on this and wouldn't mind pointing me in the right direction, I'd certainly appreciate it. My Google skills are turning up nothing. Thanks!

    Eureka!
    I got the two devices talking by:
    -On my MacBook, I started to pair the BT keyboard
    -On the Blackberry, I initiated a search for devices
    -Both systems found the keyboard
    -Started up the pairing sequence on the MacBook and got the key BUT DID NOT ENTER IT
    -I let the pairing sequence time out on the MacBook
    -By this time, the Blackberry had also timed out and was asking for a retry
    -Selected "Try Again" and entered the key displayed on the MacBook screen
    -Also entered the key on the BT keyboard and pressed "Enter"
    -BOOM - paired....
    Now the bad news...even though the devices are paired, I cannot use the keyboard for input. Back to the drawing board!

  • IOS 5 and iTunes 11 - can they synch?

    If I update iTunes to 11 on my Mac, will I still be able to synch my iOS 5 device?

    Really? Thanks for answering, that's a huge relief

  • My device was backed up before the pictures we're deleted off my photo stream and camera roll, can they be restored? There still not any on my other devices either

    How would I restore my pictures

    Sorry you don't since you deleted the pics before backing it up.

  • Indesign desktop icons - can they be altered?

    I want to distinguish between documents created in different versions of Indesign on my desktop.
    I have clients running different versions and have lots of duplicate documents saved down to various versions (I work on their servers and .idml files are glitchy)
    Short of colour coding all the files - I just wondered if there was any way of making a CS4 document have a CS4 desktop icon instead of a CS6?
    Thanks

    See: Soxy
    http://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/
    it may help

  • Stolen laptop, if password protected, can they ever get my files?

    Someone broke into my car and stole my Macbook Pro (among other expensive things in the trunk), if it is password protected on both the OS X and Vista sides, can they ever get to my files?
    I think they'd wipe the drive, right?
    I'm so not lucky...
    MacBook Pro 17"   Mac OS X (10.4.8)   dual boot Vista Ultimate

    http://www.samspublishing.com/library/content.asp?b=MacOS_XUnleashed&seqNum=104&rl=1
    Enabling the root Account
    As mentioned earlier, the administrator account is a powerful account. But the most powerful account on a Unix machine is the account called root. People also refer to root as the super user, but the account name itself is root. On most Unix systems, the first available account is the root account. In OS X, however, the root account is disabled by default as a security precaution.
    At some time, however, you might find it necessary to enable the root account. The root account can modify system settings, modify files it does not own, modify files that are not writable by default, modify a user's password, install software, become another user without having to know the password of that account, and so on. In other words, root can do anything anywhere, making the power of root immense. Because root has so much power, the only users who can become root are users with administrative privileges. Because a user with administrative privileges can become the root user, you should assign these capabilities to only completely trusted individuals.
    If you choose to enable the root account, please remember to use it with caution. Although the root account might provide some extra utility, you could accidentally wipe out your system if you do not pay careful attention to what you type. In addition, the root password you choose should be difficult to guess. Finally, become the root user only as long as necessary to complete the task at hand.
    With the presence of an administrative user, it might be a long time, if ever, before you discover a need for enabling the root user. There are many approaches that you can take for dealing with the root user, from ways to use root without enabling the root account to actually enabling the root account.
    Let's take a look at four different ways to gain root access to your system. Although you can choose whichever method you like, it's useful to understand that even though some of these methods appear to work magic, they all accomplish very much the same thing.
    The root user is disabled because it does not have a valid password set. Because there are a number of ways to set a password, there are also several ways to enable root, including one method (the first we'll look at), that was designed specifically for assigning the root account password and only the root password. In addition, you'll see how the sudo command can provide root-level access even when the root password is disabled. We recommend that users access the root account only when absolutely necessary.
    Using the NetInfo Manager Utility
    There are a couple of graphical ways to enable the root account using the NetInfo Manager utility. Do not worry if you do not understand what the NetInfo Manager utility is at this time. We will take an in-depth look at the NetInfo Manager utility in Chapter 23.
    NetInfo Manager: Method One
    Click on Applications in the Finder window toolbar. Open the Utilities folder and then open the NetInfo Manager utility.
    If nothing appears automatically when you open the NetInfo Manager, under the Domain menu, select Open; then select the default domain, which will be /.
    Click on the lock button in the bottom-left side of the window to enable a mode that allows making changes. Enter the name and password of an administrative user; then click OK.
    Under the Domain menu, select Security. Then choose Enable Root User from the submenu. Unless you have previously set a root password, a message appears with a NetInfo Error, indicating that the password is blank. Click OK.
    Enter the root password you want to use, and then click Set. Remember that the root password should not be easily guessable.
    Enter the password again for verification, and then click Verify.
    Under the Domain menu, select Save. A request to Confirm Modification appears. Click on Update this copy.
    Under the Options menu, select Restart All NetInfo Domains on Local Host. An alert asking whether you really want to restart the machine's NetInfo servers appears. Click Yes.
    Click on the lock button again to prevent any further changes. Then close the NetInfo Manager.
    You might find it sufficient just to click on the lock button again to save your changes. Figure 11.5 shows an example of what an enabled root account looks like in the NetInfo Manager. Note that the password field no longer has an * in it.
    Figure 11.5 The root account has been enabled on this machine. Note the * that was in the password field has been replaced with an encrypted password.
    NetInfo Manager: Method Two
    You could try this alternative NetInfo Manager utility method if the first one does not work for you. The danger to this method is that it copies the password of another user to the root user.
    Click on Applications in the Finder window toolbar. Open the Utilities folder; then open the NetInfo Manager utility. If nothing appears automatically when you first open the NetInfo Manager, from the Domain menu, select Open and then select the default domain, which will be /.
    Click on the lock button in the bottom-left side of the window to enable a mode that allows making changes. Enter the name and password of an administrative user. Then click OK.
    Click on Users in the second list, and then click on a user you created whose password you know.
    Double-click on the value across from passwd in the bottom section of the window and copy it. What you are looking at is an encoded copy of the user's password.
    Click on root in the users list. Note that the default value for the password for root is *, which means that no one can log in as root right now. Using * in the passwd field is a way to lock a user from the machine.
    Double-click in the field with the *; then paste in the encoded password from the previous user to replace the *. The * should no longer be present when you are done.
    Select Save from the Domain menu. A request to Confirm Modification appears. Click Update This Copy.
    Select Restart All NetInfo Domains on Local Host under the Options menu. An alert asking whether you really want to restart the machine's NetInfo servers appears. Click Yes.
    Click the lock button again to prevent any further changes; then close the NetInfo Manager.
    Again, note that you might find it sufficient to just click on the lock button again to save your changes.
    Using the OS X Installation CD
    Because the OS X installation CD comes with an option to reset a user's password, you could use the installation CD itself to enable the root user.
    To enable the root account using the OS X installation CD, do the following:
    Insert the OS X CD.
    With the CD in the CD-ROM drive, reboot the machine. Hold the C key while the machine reboots.
    Wait for the Installer to appear and then select the Reset Password option under the Installer menu.
    Select the OS X disk that contains the root account you want to enable. If you notice a spinning CD icon appear after you have chosen the Reset Password option, don't wait for the spinning to end to select your OS X disk. The System Administrator (root) user appears as the default user.
    Enter a new password and then re-enter the password for verification. Click Save. Click OK when the Password Saved box appears.
    Quit the Password Reset application, quit the Installer, and click Restart.
    Using sudo at the Command Line
    Although we won't start looking at the command-line utilities in depth until Chapter 15, "Command-Line Applications," we take this opportunity to demonstrate some ways to accomplish tasks that root might do by using the sudo command-line utility. It is all right if you do not feel comfortable with trying anything you see in this section at this time. When you are more familiar with working with the command line, you can return to this section. If you do want to try anything in this section, you can run the commands in a terminal window. Just open the Terminal application in the Utilities folder in the Applications folder.
    Using sudo to Run Commands as root
    sudo is a command-line utility that allows use of the root account without necessarily enabling root.
    For example, in a terminal window, you could use sudo to reboot the machine now:
    [localhost:~] joray% sudo shutdown -r now
    The most common way to use sudo is to preface each command that you want root to do with the sudo utility. If you are asked for a password, use the password of the user who is executing the sudo command. If the user is not eligible to execute sudo, the command is not executed.
    If you need to execute a few commands in a row as root, you could try a couple alternative uses of sudo. When you are done with the tasks for root, type exit at the end of your session.
    In this example, your shell is elevated to that of root until you exit the session:
    [localhost:~] joray% sudo -s
    We trust you have received the usual lecture from the local System
    Administrator. It usually boils down to these two things:
    #1) Respect the privacy of others.
    #2) Think before you type.
    Password:
    [localhost:~] root#
    Notice that the prompt changes to include root#, as a reminder that you now have the power of root.
    In this example, sudo is used to run su to become root until you exit the session. When root is enabled, su can be used to switch to the root user. When using su by itself, the password you enter to become root is that of root, rather than yours, as you do with sudo.
    [localhost:~] joray% sudo su
    Password:
    [localhost:/Users/joray] root#
    Notice that in this example, the prompt also includes root# as a reminder of your power as root. Remember, to return to the status of a regular user, type exit when you are done with your root session.
    Using sudo to Enable the root Account
    Recall that the sudo command is used to execute a command that root might execute. A way to enable the root account is to use sudo to execute passwd, which is a command used to change passwords.
    Here is an example:
    [localhost:~] joray% sudo passwd root
    Password:
    Changing password for root.
    New password:
    Retype new password:
    [localhost:~] joray%
    The password that you initially enter is your password. Then you supply a password for root, and re-enter it for verification. If you mistype the password, you will be prompted again, as shown in this example:
    [localhost:~] joray% sudo passwd root
    Password:
    Changing password for root.
    New password:
    Retype new password:
    Mismatch; try again, EOF to quit.
    New password:
    Retype new password:
    [localhost:~] joray%

Maybe you are looking for