PE7 error (cannot open project):  ..\..\Src\Video\VideoSegment.cpp-55

I am a rookie with PE7 and definitely not very tech-savvy compared to most on this forum, but I came to this site looking for assistance with a PE7 video project I have been working on for the last several weeks and now I'm afraid I have lost.  When I attempt to open the project, I get an error message saying "Premier Elements has encountered an error [..\..\Src\Video\VideoSegment.cpp-55]."  When I click "continue", another error box pops up saying "This application has requested the Runtime to terminate it in an unusual way.  Please contact the applicant's support team for more information."  When I click "OK", another box pops up and says "A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."  I have rebooted my computer several times and get this message every time.  Regrettably, I made the rookie mistake of not backing up my project file and now am afraid I will lose my hours of work.  I was about 1-2 hours from being done with this project and was supposed to submit it to an NGO this week.  Can't believe it crashed at this point.  Any ideas on how I might be able to get back into this file so I can recover my work?
The project is a 25 minute documentary using multiple HD video clips, still photos, titles, and mp3 audio.  Below is the information I heard I was supposed to post.  If there is other information needed, please let me know.  Again, I am not well-versed in computer lingo, so if there is other information I need to hunt down, any help on where to look for it, etc would be greatly appreciated. Thanks so much for your help.
DxDiag
System Information
Time of this report: 8/15/2010, 21:00:30
       Machine name: COSETTEY-PC
   Operating System: Windows Vista™ Home Basic (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.100608-0458)
           Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
       System Model: Inspiron 1420                  
               BIOS: Phoenix ROM BIOS PLUS Version 1.10 A09
          Processor: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz (2 CPUs), ~1.7GHz
             Memory: 2038MB RAM
          Page File: 2041MB used, 2274MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
     DxDiag Version: 7.00.6002.18107 32bit Unicode
DxDiag Notes
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
        Sound Tab 2: No problems found.
          Input Tab: No problems found.
DirectX Debug Levels
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)
OS Name Microsoft® Windows Vista™ Home Basic
Version 6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name COSETTEY-PC
System Manufacturer Dell Inc.
System Model Inspiron 1420
System Type X86-based PC
Processor Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz, 1667 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Dell Inc. A09, 7/11/2008
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume3
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.18005"
User Name Cosettey-PC\Cosette
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 2.00 GB
Total Physical Memory 1.99 GB
Available Physical Memory 907 MB
Total Virtual Memory 4.21 GB
Available Virtual Memory 2.72 GB
Page File Space 2.28 GB
Page File C:\pagefile.sys

Concerning your .prel failure PRE will have created backup copies of your .prel in the folder "Adobe Premiere Elements Auto-Save" under your main project folder. Copy these to a temporary folder and see if they open correctly. If they do, I recommend the very first action you take is to export your project to an AVI or HDV format. These are then available to import into any PRE project.
Some basics:
Install all Windows updates
Install latest version of QuickTime (v7.6.6 at time of writing)
Install most recent graphics and sound drivers from the manufacturers web sites
Run Disk Cleanup
Run Defragmenter
Post back here with the necessary information described here: Got a Problem? How to Get Started
Some Specifics:
What project preset are you using?
Where are you getting those HD clips from and what format are they (use Gspot linked in the Got a Problem Link)?
Check the reolution of your still photos. Ideally they should match your expected output (or a little larger if you want to pan & zoom). Use a Photo editor (Photoshop Elements is ideal if you have it) to resize.
Convert your MP3 files to WAV 48,000Hz 16bit and import those into the project. Wait and do nothing until conforming finishes (the bar at the bottom right of the screen shows progress).
Your PC is seriously underpowered for HD in PRE (2GB RAM and only dual 1.66GHx processors. With only 2GB RAM and only 1GB free I think it likely that you have several background processes running. Examine what you have and exit (or kill with task manager) as much as you can. Temporarily disable real-time processing of your anti-virus/anti-spyware software.
How many hard disks do you have and how much (defragmented) free space are on them?
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

  • Premier Pro Error:  [..\..\Src\Video\VideoSegment.cpp-55]

    I have been editing a project for three days now and last night as I was placing the "In" mark on a scene, I got a popup that said,"Premiere Pro Debug Event", "Premiere Pro has encountered an error", "[..\..\Src\Video\VideoSegment.cpp-55]".
    I rebooted the machine and the error still occurs. No matter which scene I try and pull from the trim bin I get the error as soon as I mark a "In" spot on the scene.
    I am using Premiere Pro CS3 ver. 3.2.0, running on Windows XP (will all updates), a Pentium Dual Core 2.66GHz, 4 Gig of RAM, NVIDIA GeForce 7600 GS Video Card.
    I thought the scene from the bin was corrupted somehow but they all have the same problem.
    Any Ideas???
    Thanks,
    Kameraman1

    Process PID CPU Description Company Name
    System Idle Process 0 97.66
    Interrupts n/a 1.56 Hardware Interrupts
    DPCs n/a Deferred Procedure Calls
    System 4
    smss.exe 560 Windows NT Session Manager Microsoft Corporation
    csrss.exe 628 Client Server Runtime Process Microsoft Corporation
    winlogon.exe 912 Windows NT Logon Application Microsoft Corporation
    services.exe 956 Services and Controller app Microsoft Corporation
    svchost.exe 1148 Generic Host Process for Win32 Services Microsoft Corporation
    svchost.exe 1196 Generic Host Process for Win32 Services Microsoft Corporation
    svchost.exe 1288 Generic Host Process for Win32 Services Microsoft Corporation
    svchost.exe 1404 Generic Host Process for Win32 Services Microsoft Corporation
    svchost.exe 1464 Generic Host Process for Win32 Services Microsoft Corporation
    spoolsv.exe 1596 Spooler SubSystem App Microsoft Corporation
    AppleMobileDeviceService.exe 1236 Apple Mobile Device Service Apple Inc.
    mDNSResponder.exe 1248 Bonjour Service Apple Inc.
    nvsvc32.exe 1392 NVIDIA Driver Helper Service, Version 175.19 NVIDIA Corporation
    svchost.exe 1556 Generic Host Process for Win32 Services Microsoft Corporation
    Tablet.exe 1824 WacomService Wacom Technology, Corp.
    ULCDRSvr.exe 1980 ULCDRSvr Ulead Systems, Inc.
    upsd.exe 2028 upsd Delta
    WLService.exe 808 WLService GEMTEKS
    WMP54GS.exe 1672 Wireless Network Monitor Cisco Linksys Corporation
    iPodService.exe 2332 iPodService Module Apple Inc.
    alg.exe 2576 Application Layer Gateway Service Microsoft Corporation
    svchost.exe 2968 Generic Host Process for Win32 Services Microsoft Corporation
    FNPLicensingService.exe 3616 Activation Licensing Service Acresso Software Inc.
    lsass.exe 968 LSA Shell (Export Version) Microsoft Corporation
    explorer.exe 1932 Windows Explorer Microsoft Corporation
    AiNap.exe 136
    realsched.exe 192 RealNetworks Scheduler RealNetworks, Inc.
    rundll32.exe 200 Run a DLL as an App Microsoft Corporation
    RTHDCPL.exe 212 Realtek HD Audio Control Panel Realtek Semiconductor Corp.
    issch.exe 244 InstallShield Update Service Scheduler InstallShield Software Corporation
    iTunesHelper.exe 812 iTunesHelper Module Apple Inc.
    DVD43_Tray.exe 820
    msmsgs.exe 836 Windows Messenger Microsoft Corporation
    ctfmon.exe 844 CTF Loader Microsoft Corporation
    MUPS.exe 880
    TabUserW.exe 884 TABUSERW Wacom Technology, Corp.
    jsm.exe 112 Settings Microsoft ???????
    Adobe Premiere Pro.exe 1116
    PhotoshopServer.exe 3368
    procexp.exe 2912 0.78 Sysinternals Process Explorer Sysinternals - www.sysinternals.com
    rundll32.exe 180 Run a DLL as an App Microsoft Corporation
    aaCenter.exe 3352

  • Getting error "cannot open" when playing Videos purchased on itunes.

    I'm trying to stream videos from my PC to my iPad 2 using the "Videos" app and i keep getting error "cannot open" on any video that I try to play that I purchased through iTunes. Other videos I added that werent purshased through itunes play fine however. Can anyone help with a solution? My iPad is on 5.0.1 if that helps.

    I'm getting this error suddenly. I used to be able to stream purchased movies just fine, and now it simply says, "Cannot open." With movies I ripped from my DVDs, they will play just fine, but movies purchased from iTunes give the error every time.
    I know I don't have any odd characters in my name like mikesoderstrom had and I haven't changed any account details since the last time it was working a few weeks ago. The only major change I can think of is upgrading to iTunes 11.
    My iTunes account says that both my Mac and my Phone are still authorized. Maybe I should try deauthorizing all anyway, but I'd rather not deal with the hassle of re-authorizing, especially if it didn't work for someone who tried it already.
    I have no problems with downloading/updating apps, just with Home Sharing purchased movies.

  • Error: Cannot open project file

    Does that error message mean I am trying to open a project file that was created with a version of FCP that is later than what I operate with?
    Also, where did the FCP FAQ section go?
    PowerMac G4 desky 867MHz 1GB RAM   Mac OS X (10.2.x)   FCP 3.0.4

    Are you trying to open a project created by a later version? (using FCP 4.5 to open a project created in FCP 5 for example)
    If so, it can't ge done. The best you can do is export an XML of the cut (only the cut) that the previous version can then import.
    #27 Getting a FCP 5 project to open in FCP 4.5
    Shane's Stock Answer #27: How do I export my FCP 5 project so that someone can work with it in FCP 4.5?
    Final Cut Pro 5 projects are not backwards compatible. What that means is that a project created in FCP 5 cannot be opened by previous versions. The previous version cannot recognize the formatting and code of the newer version. You can go from FCP 4.5 5o 5, but it will reformat your project file, so if you want to have a 4.5 version best to duplicate it and convert the duplicate.
    You can, however, export the sequence from FCP 5 so that it will open in FCP 4.5 if you follow these steps:
    1) Select all in the Browser
    2) Choose File>Export>XML
    3) Make sure you choose XML version 1 in the following dialog box
    4) Launch FCP4.5 and create a new project
    5) With that project's Browser open and active, import the XML
    For an in-depth explaination, read this:
    http://www.lafcpug.org/Tutorials/basicfcp5_to4.html
    Shane

  • Cannot open project: the folder for this project cannot be found cs4

    I am using Encore CS4  and I get the error "cannot open project: the folder for this project cannot be found"
    Having searched the forums I can not find a solution for when the project folder has been deleted.
    Can someone tell me the solution to this issue.

    If you deleted the Encore directory, you cannot fix this.  You'll have to start over.
    Encore creates this folder structure:
    Root or some other Folder
    MyProject.ncor (the Encore project FILE)
    MyProject (the Encore project directory)
    Other Folders for the Encore project (e.g. Cache, Sources)
    You can get the "the folder for this project cannot be found"  in various ways.
    There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name.  You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
    Folder was renamed.  If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
    Encore project file was moved - or Encore directories were moved.  If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
    If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone.  While many of its instructions are inside the project file itself, many are not.  Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

  • CS4 Encore cannot open project

    Why after creating a CS4 Pro project, Dynamic Link to Encore shows error "Cannot open project; The folder for this project cannot be found?

    This forum is for "current" Premiere Pro
    PProCS4 = http://forums.adobe.com/community/premiere/premierepro_previous?view=all
    Encore = http://forums.adobe.com/community/encore

  • Cannot open the pdf/videos in my Linux, Adobe Reader 9. It fires an error...

    Cannot open the pdf/videos in my Linux, Adobe Reader 9. It fires an error...
    "A 3D data parsing error has occurred"
    By any chance have someone help me with this issue?  Thanks!

    thanks Jono But I cannot see any option to set Target Version.
    the options I have are XDP Preview format and PDF Render Format which are set to Acrobat 7 static PDF form.
    I have set a permissions password on the form using Acrobat 8 and under Password security settings , I have set the compatibility as Acrobat 5.0 or later. However, When I look at the form properties by opening the same form in LiveCycle, the compatibility still shows Acrobat 8 static PDF form.
    How do I get this form to be opened by users in Adobe 7?
    Appreciate your quick response.

  • Cannot open project. Just got an error message that says:  '  project contained a sequence that coul

    Cannot open project. Just got an error message that says:  '  project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated witht his sequence type. "  how do I navigate this and reopen my project. ( note: I recently transitioned from the 30 day free trial to 'buying in' to the license cloud application; if that has relevance....)

      FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • Error "cannot open render.mov"

    Hi
    In FCP, Im trying to fix up some audio. Sent the clip to Soundtrack pro (STP) but STP says error "cannot open render.mov"
    any suggestions?
    I also tried opening the file directly - eg "open in editor"didn't work
    also tried changing the extension to ".wav" which didn't work either.

    Hi
    I've got the same difficulty sending clips to Soundtrack Pro in Final Cut Studio 3. This evening, I found a turnaround that works (at least in my case), but that do not explain whether it is a bug or not.
    I observed that when I send a clip to STP, two files are created :
    • one looks like a STP package file and contains two small files (among them a render.mov that can be read by QT, showing that it is a sound file)
    • the other has the same name but truncated (only the first 18 letters) and is a video clip.
    I put this last video clip inside the STP package, and then it worked : this new package file opens in STP correctly, I can edit the sound tracks, and when I save the file in STP, all changes are made in FCP.
    Can you reproduce this on your systems ?

  • Upgrade Plug-ins error (Cannot Open File)

    I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
    Cannot Open File
    IMAGE.RPLN
    IMAGE FILTERS.RPLN
    HYPERLINKS.RPLN
    "Cannot open "Masters_book dec.indd".
    Please upgrade your plug-ins to their latest
    versions, or upgrade to the latest version of
    Adobe InDesign."
    I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

    I probably shouldn't dwell, on this, but I can get really worked up over it.
    I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
    Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
    I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
    (You can imagine how well these conversations with Adobe Support go...)
    Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
    (*) Yes, I know, this incident would not have been "today." Consider it time dilation.

  • [Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

    hi
    I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table. 
    when i'm trying to run the package, i'm getting the following error: 
    [Flat File Source [2]] Warning: The system cannot find the file specified.
    [Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
    [SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
    I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
    I'll be happy for assistance
    thanks
    Yaron

    Hi Yaron,
    Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
    check the following points:
    Enable SQL Server for Kerberos
    Check delegation settings for SQL Server service account and Computer
    Add Host SPNs for FileShare Server and SQL Server
    References:
    http://msdn.microsoft.com/en-us/library/dd568720.aspx
    http://msdn.microsoft.com/en-us/library/ms191153.aspx
    Regards,
    Mike Yin
    TechNet Community Support

  • Photoshop files in FCE - Cannot Open Project

    I have a series of Photoshop files (RGB with about 10 layers a piece).
    I am able to import a file into FCE HD and move the layers around as tracks - everything works great.
    I save the file, and close. When I try to re-open the file, I get the dreaded "Cannot open project file".
    I have tried this with an external drive and saving to the desktop. I have also tried importing normal pictures - no problem. It's when I import layers. I have been able to isolate the problem to layered Photoshop files.
    Any ideas?
    thanks.

    Any PS file that has transparency that is imported
    into a PAL project will corrupt the file, so
    that you cannot open it again. Sorry.
    See this (9th post down) which showed that any file created in Photoshop with its type as ".psd", whether with or without transparency, will give this fault. However, a file created in Photoshop with .tif will be safe even if it has transparency.
    G5/2.0 GHz   Mac OS X (10.3.9)   1 GB RAM, 150 GB HD, Sony DCR-HC96 mini DV, FCE HD 3.0 DVD SP 3

  • Loosing X ... 'Error: cannot open display: localhost:11.0'

    Hello, I hope some may be able to help me finding a solution to this X related problem.
    Before Lion everything worked as expected.
    From a terminal I
    ssh -X user@linuxbox
    and it work as expected... all the X application come back to my Mac.
    but after a while (generaly not long ... about 5 to 10 min)
    I cannot launch any X application anymore.
    within my Terminal I get "Error: cannot open display: localhost:11.0"
    and  on the linuxbox side I get " sshd[xxxx]: channel 4: open failed: administratively prohibited: open failed"
    Running 10.7.1. fully updated (from my 10.6.8 Mac I do not have this problem
    ... and never had)
    Thanks in advance for your help
    PhS

    'arch' is set as the alias for localhost.  I never entered 'arch' anyway, that's just what the error said.
    e:  I tried ssh-ing into a X session on another laptop running an Ubuntu live CD.  I can ssh into it normally, but when I run 'xinit -e ssh -XCT [email protected] gnome-session -- :1' it just starts a new X session on ctrl+alt+F8 using my startx file, rather than the one on the other computer.
    Last edited by Yes (2008-07-11 19:17:28)

  • Getting an error 'Cannot open Boot device' while trying to install Solaris

    Hi,
    We were trying to install Solaris * on a Sun Sparc system and the CD rom drive does not seem to get recognised. When we try booting from cd rom we get an error 'Cannot open boot device' .
    This server was up & running and we were trying to remove a hard disk that had failed and modified the vfstab script . After that the system failed to even boot up. So when we tried reinstalling the OS we are running into this problem.
    Am new to this technology ...And any help would be greatly appreciated. .....
    Thanks

    Cdrom drive must be scsi device 6
    I assume you are running < boot cdrom> at the ok prompt
    also at the ok prompt run the command <probe-scsi> (without the angled brackets) you need to see the following:
    Target 6
    Unit 0 Removable read only device TOSHIBA XM.......bigpileofnumbers
    If not, check the cdrom drive and the cdrom inside
    hope this helps
    Alan

  • Client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc

    Hi Experts,
    While Client copy in Local System , I am facin gthis Error, please anybody help me out.
    client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
    Regards,
    Amit,

    Your Error Message is like => cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
    This means 'w2k3-web53' is your machine name. and your sap system name is 'ECC'.
    1) If you are on windows then :
        Type '
    w2k3-web53\sapmnt' in address bar, this gives you an error and hence you are getting the above mentioned SAP error.
        Therefore to get out of this error follow the simple steps=>
         I) Create 'sapmnt/trans/log' (recursive) directories anywhere on your machine.
        II) Share 'sapmnt' directory over network {right click on directory->properties->sharing} with full access to others.
       III) Confirm this by typing '
    w2k3-web53\sapmnt' in your address bar. 'CC00000*.ECC' will be created automatically by SAP system  while copying.
    2) If you are using Linux then:
        Create the directories as mentioned above and give full access to directories by using CHMOD command.
        Share 'sapmnt' directory if necessary.
    Note: Change the protection level of your client in SAP if necessary:
    SCC4->EDIT->Double click your client -> then set Protection level at level 0 {No restriction}.

Maybe you are looking for