Percent in Review area

Hi! I've made a project that only contains question slides.
The last slide is the one with the results. What I want to do is to
print the percentage of the correct answers in the review area at
the bottom of the last slide. I know I can get the percentage, but
I want to print it in a text at the review area, something like:
"Your score was only xy%" when the student failed. thnx in
advance!

So, here is my workaround:
On the Quiz Review slide, I created two captions, one for passing, and one for failing. I set both of them to be hidden. I then created a conditional Advanced Action called ExamCaption and set one expression to show the Pass Caption if cpQuizInfoPointsscored was above or at my passmark, and set another expression to show the Fail Caption if cpQuizInfoPointsscored was below my pass mark. I also set each expression to hide the other non applicable caption for good measure.
I set the On Enter action to ExamCaption for this slide.
Reading Lilybiri's blog, I also replaced the Captivate Pass/Failure captions with just a space for each, so that nothing is shown.
Only problem is, the captions fade out after 3 seconds, the duration of the slide, despite being set to No Transition. I therefore increased the length of the slide to 60 seconds. If anyone has a better workaround, please let me know.
Hope that helps!

Similar Messages

Is there a way to fix particular percent of slice area to each level value

Is there a way to fix particular percent of slice area to each level value in a flash pie Chart?
I need a pie chart for Distribution of Escalations by Status; here I have following status Record in my table
5 record for Status: Reopen
2 record for Status: Escalated
2015 record for Status: Closed
12 record for Status: Open
1000 record for Status: WIP
So I am not able to see data in pie chart for Status Reopen, Escalated, and Open, bcz all levels are overlapping each other
So I want to fix particular percent of slice area to each level value(Reopen, Escalated, Closed , WIP and Open)
For e.g. I want to show 15% slice area of chart for Escalated, 10% for Reopen, 20% for Open
25% for WIP and 30% for Closed. So i can see record for all status while that have less data as compare to other
status.
I am using following query for pie Chart….
SELECT
''javascript:dhtml_GetReport_r2(0,0,0,0,0,''''''||''''||STATUS||''''||'''''',0)'' link,
nvl(STATUS,''Unknown'') label,
COUNT(ISSUE_ID) Escalations
FROM XYZ_ITR_MAIN
WHERE 1=1 GROUP BY STATUS;
Thanks
Rathore
Edited by: Rathore on 01-Apr-2010 02:37

Your requirement makes sense from the point of visibility but doesn't make sense having the facts in mind that 2 out of 3034 is always 0,000659195% no matter how you look at it. And a pie chart is always going to give you exactly that. The only thing you can do is to manipulate your data but then what a user will see is not going to match with the reality. So, the only solution I see is to make a bigger chart. Exploding a pie chart is also an alternative but I don't think you can do that currently with the flash charts.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Captivate 5.5 Review message no longer wraps in Review area caption box

Has anyone else experienced this issue? I logged it as a bug when someone else in my company reported the same issue to me. I searched for it on the Internet and didn't get any hits. We tested to see if it was just for converted projects from 4 to 5.5 or for new ones as well. It's not working for new ones. This problem did not exist in version 5.
Basically the text won't wrap so the text displays completely across the screen (no matter what size the Review Area caption size is), cutting off the text at both ends for longer feedback messages.
Workaround: You can work around this issue by forcing a carriage return in your feedback messages by pressing Enter at an appropriate place in the message. You'll probably have to fool around with that a bit to determine the best place.

So, here is my workaround:
On the Quiz Review slide, I created two captions, one for passing, and one for failing. I set both of them to be hidden. I then created a conditional Advanced Action called ExamCaption and set one expression to show the Pass Caption if cpQuizInfoPointsscored was above or at my passmark, and set another expression to show the Fail Caption if cpQuizInfoPointsscored was below my pass mark. I also set each expression to hide the other non applicable caption for good measure.
I set the On Enter action to ExamCaption for this slide.
Reading Lilybiri's blog, I also replaced the Captivate Pass/Failure captions with just a space for each, so that nothing is shown.
Only problem is, the captions fade out after 3 seconds, the duration of the slide, despite being set to No Transition. I therefore increased the length of the slide to 60 seconds. If anyone has a better workaround, please let me know.
Hope that helps!

NO reviews are showen in dev center and on store app too.

some of my frndz and downloaders installed my app on their phone .. but when they try to review the ratings and reviews are submitted but not shown on my dev center and store app reviews section.
help me out from this.

1. App Store>Featured (bottom of page)>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Tap Country/Region
6. Tap Change Country or Region
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/75705ca9af070c17ff3 275a04a88b9e2.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/b4cc71e8ada367a824a b7855351d6ae3.jpg

Formatting the Quiz Review Area

Is there a way to re-format the font, background, size or any
other appearance aspects in the quiz review area? I know how to
change the messages presented in this area via the Quiz Manager,
but need help with changing the font size, etc.
Speedy reply appreciated - as this is the last touch to a
project due tomorrow. Thanks!

Hi pewinggrim and welcome to our community
Unfortunately, there is very little you can do with this.
Pretty much what you see is what you get. Aside from the text, you
can't really control formatting.
Sorry... Rick

I have been considering buying Aperture 3 but the numerous, negative reviews are making me wary. Should I buy the first version - Aperture 2.1.1 instead?

I have been considering buying Aperture 3 but the numerous, negative reviews are making me wary. Should I buy the first version - Aperture 2.1.1 instead?
I have a 2009 MacBook Pro running Snow Leopard. I do not think I will upgrade to Lion because I was warned that it may conflict with some of my applications.
There have been so many reviews that talk about how Aperture 3 is so slow and spends too much time searching for Faces and eventually crashes. And, many reviews mention that you need to add to your RAM which I can't do right now, especially on a 3 year old computer.
There are some copies Aperture 2 on Amazon. Would that be a good place to buy a copy or a used copy?
I would appreciate some good advice. Thanks, Taf Schaefer

Obviously you haven't read the reviews of Aperture 2
FWIW I use Ap3 on both a 2010 MBP (8 gigs of Ram) and an 2008 iMac (4 gigs) and I have no crashing issues whatever. Remember, you can disable Faces if you don't want to use that feature.
Elv07 wrote:
I used to use iPhoto and I will probably revert to that (although it has fewer function like no RAW import etc.)
Just an FYI: iPhoto supports exactly the same Raws as Aperture.
Regards
TD

Adobe Captivate 6 problem with Review area text on Quiz results page

Hi,
I am using Adobe Captivate 6 and I have a test at the end of my project with the built in 'Quiz results page' at the end.
However, the standard 'review area' provided always seems to play up for me. I have changed the 'quiz results messages' through the preferences and changed the font of the review area, but everytime I play my project the message displayed is in a different font that I did not set and the size is so large that the sentence goes off the screen. It has done this on numerous projects.
I have changed the font of the review area and it shows up on my normal view, but everytime I preview the project or publish it, the font changes back to a strange default.
Does anyone know how I can fix this?
Thank you.

Hannah,
That is a very well-known bug in the last Captivate versions... if you screen these forums you'll find multiple threads complaining about it. Some fonts will work, I think Calibri works (not all styles however) and all the other fonts revert to Times New Roman. I'm a bit puzzled that you call it a 'strange default'.
Lilybiri

App reviews are not uploaded

People who downloaded the app says their reviews are not uploaded.
They write a review in App Store but customer's reviews and stars do not appear on the comments section
Is there any solutions what I should do to fix this problem?

this is a user helping user forum
you sound like you're trying to get in contact with
app store support

Size and position of the review area

hi all,
at the end of a quiz, i get the quiz result with score and
review area with text indicating whether i pass or fail the quiz.
For some reason, when i make the review area box smaller, the
text doesen't wrap with the box. In addition, i also bold the text
but captivate doesn't reflect that after i published.
any ideas?
thanks
JT

Hi all
We shouldn't forget to report this to Adobe as a bug.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Adobe Captivate 4/5 Review Area Problem

When reviewing a quiz the message, whether it be the "your answer is correct" or "your answer is incorrect" does not seem to appear where i want it to.
When I move the review area the messages do not seem to move accordingly.
This is the screen for a correct message. As you can see the review message is in a good location.
However the Fail message does not appear in the same area as you can see
I have tried moving the review area around, changing the text size, style and size however this doesnt seem to work.
I have also tried a number of methods suggested on here such as:
Removing the default captions and adding in a invisible text caption. Although this works, it doesnt work if you use a random question slide, nor does it provide the user with the correct answer like the above method
I have also tried to insert an enter before the success message to bring it down one line. This does an satisfactory job but inserts a square in to show the return.
Is there another way this can be resolved? Possibly changing the dreamweaver code?
Any help would be greatly appreciated.
Thanks

When reviewing a quiz the message, whether it be the "your answer is correct" or "your answer is incorrect" does not seem to appear where i want it to.
When I move the review area the messages do not seem to move accordingly.
This is the screen for a correct message. As you can see the review message is in a good location.
However the Fail message does not appear in the same area as you can see
I have tried moving the review area around, changing the text size, style and size however this doesnt seem to work.
I have also tried a number of methods suggested on here such as:
Removing the default captions and adding in a invisible text caption. Although this works, it doesnt work if you use a random question slide, nor does it provide the user with the correct answer like the above method
I have also tried to insert an enter before the success message to bring it down one line. This does an satisfactory job but inserts a square in to show the return.
Is there another way this can be resolved? Possibly changing the dreamweaver code?
Any help would be greatly appreciated.
Thanks

Review Area issue in Captivate 5 quiz

In testing a quiz I created in Captivate 5, I am finding that the Incorrect and Correct answers in the Review Area are truncated vertically. How can I get this text to show up completely?

The best you can do is use a smaller text font. The Review Area in Captivate 4 and 5 is not very configurable. If you can upgrade to Cp 5.5 it's much improved.

Review area; I can't edit text per question

I've looked but haven't seen my question (or the solution), so here it is.
This time it is not about editing the review area.
I have a quiz with several multiple choice question, one answer only - although somewhere in the middle there's one with multiple correct answers.
When I double click in the slide on the review area I see the text for the correct answer and the wrong answer.
When I edit this text, it's changed for all the slides/questions. Even though default setting is: apply for this slide only.
What to do?
I've read in the Helpfiles that a changed review area becomes the default for new areas. The problem however is that the changed text is also seen in already existing slides.
I have made my questions by duplicating the first question and then altering the duplicate each time. Could that be the cause?
Hope someone can shed some light. Thanks!

Hi there
As you have seen, the Review area is rather generic. It only allows for a single configuration change that appears on all Question slides.
If you feel this should operate on a "Per Question" basis, please consider submitting a Wish Form to ask for it. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Quiz Slide - Review Area

Rick,
What is the purpose of the Review area on the quiz slide?
Most of the time, I shrink it very small and out of the way. What
can I use it for?
Angie

Hi there Angie
Just a note here. While I do tend to be prolific with
answering and responding to forum posts, there are many folks here
that help other than me.
As for your question, here is how it works. When you have a
quiz with question slides, you have correct and incorrect answers
for each question. You also have an ability to enable the user to
perform a review of the quiz. So once the questions are finished
and they see the results screen, if you have allowed reviewing,
there should be a button on that slide that allows them to review
the questions. When clicked, they are transported to the first
question. The Review area is where they see the messages pertaining
to the question.
Does that make things clearer? If not, post back with where
things are still hazy and one of us will try to 'splain it better.
Cheers... Rick

Review area on Question Slides

Good morning,
I'm creating several question slides and on each one, a grey
"review area" keeps being displayed. What is this used for from a
learner perspective and if I don't want it, how do I get rid of it?
I've checked each of the Question tabs but can't find anything to
deselect.
Thanks for your help,
Helen

Hi Helen
Let's say you have a True/False question with a Review Area.
You take the quiz and on the Results slide, you see a button
labeled "Review Quiz". If you click the button, you see a table
listing:
Your answer: B
The correct answer is: A
Of course, what you see here will vary based on choices.
If you want to turn off the Review Area, click Project >
Quiz Manager... > Quiz Settings tab and DE-select the option
labeled "Allow user to review quiz".
Cheers... Rick

Help! I've deleted the review area in the results page and now I can't get it back

I started the project in Capt 5.5 and then opened it with Capt 6 and continued to work on it. When I wen to amend the pass fail message on hte quiz results page I noticed that the review area was missing from the page and I can't find a way of getting it back.
Anyone else come across this before?

For sure something is wrong with that advanced action because I have used that approach since long.
http://blog.lilybiri.com/question-question-slides-in-captivate
http://blog.lilybiri.com/question-question-slides-part-2 talk about the review area and customizing it here
Did you try to delete the score slide and add it again (still possible in CP5.5, not in CP6 where it will only be hidden)?
Lilybiri

Percent in Review area

Similar Messages

Maybe you are looking for