Percentages in 2D line graph

Hi
Im having some problems formatting a 2D line graph. The data in the graph is based on a table of dates and corresponding percentages (three percentage colums and one date column). The information is formatted as a percentage in the table but is entered as decimals.
The graph shows up correctly with the exception of the format of the y, or percentage axis. This show up as a decimal. After trying to format it as a percentage in the drop down menu for the y axis, I can't access "percentage" in this menu. It is greyed out for some reason.
Any ideas, save for adding a new column and adjusting the data?

ejm,
The percentage option that is grayed-out is reserved for the stacked bar chart, I believe. Numbers Charts do not have a formatting feature that converts ratio data to percent. You must do it yourself and then chart the result. I presume that you have a column now that contains ratio data that you have formatted as percent. If you create an auxiliary column that multiplies the original column by 100, you can chart the new column and hide the source data column.
Jerry

Similar Messages

Issue with Line Graph in SSRS

I am pulling my hair our trying to format a line graph.
Below is my current report -
The Line Graph I have created has a Category Group of "YearLogged" and "MonthLogged".
The series I have added is an expression -
=Count(IIF(Fields!InvoicePaid_.Value = "Yes" And Fields!ProcessTarget.Value = "InTarget", 1, Nothing))
As you can see the data label is coming back as values in "Paid" column from my table. What I want is the percentages instead labelled.
Also the Y axis is coming back with the total Paid invoices as a percentage? That's not right I want that to show up to 100%.
I just want to show what % of invoices are being paid In Target over the month.
Another question - where is the legend title getting "Process Target" from? Can I rename that to what ever I want?

Hi ikilledbill,
According to the snapshot of the chart you have provided that it seems you have put the fields "YearLogged" and "MonthLogged" in the Category Group and add field "InTarget" in the Value area as Series, you also add
the expression "Count(IIF(Fields!InvoicePaid_.Value = "Yes" And Fields!ProcessTarget.Value = "InTarget", 1, Nothing))" to display another series, now you want to display the percentage of InTarget/Paid as the data
point, right?
I have tested on my local envoronment and details information below for your reference:
I have use some sample data as below and if you want to display the percentage value as in below snapshot, you need to add expression like below in the series:
=Fields!InTarget.Value/Fields!Paid.Value
After add the expression, right click the data label to select the "Series Label Properties" and click Number to select the "Percentage".
Right click the Y-Axis and select the "Vertical Axis Properties", click Number to select the "Percentage".
To change the Legend Title, please right click the series and select the "Series Properties", enter the title you want in the "Custom legend text":
If I have some misunderstanding, please try to provide more details information about the design of the chart and also sample data in the table.
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to draw cumulative line graph over the stacked bar chart?(SSRS)

Hello,
I need your help to draw a cumulative line graph over this bar chart.
I need your help to draw a cumulative line graph over this bar chart in SSRS.
The dimension (Category Group) is "Hour" in this case. and expression is sum of two distinct values like 'Y' and 'N' in Activity column(Series Groups). The sum(Activity=Y) in green color and sum(Activity='N') in Red color.
I require to draw a cumulative line graph in this same chart, that should give the result of cumulative Sum(Activity) for each hour?? I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
SSRS Version details:
Microsoft SQL Server Reporting Services Designers
Version 10.50.1600.1
--Siva

Hi Siva,
It seems that you need to verify your email address to post images, etc
Besides, Microsoft® SQL Server™ 2008 Reporting Services: Step by Step is a good choice to you. With STEP BY STEP, you work at your own pace through hands-on, learn-by-doing exercises. A companion CD includes data sets and sample code. You can download
it from this link http://my.safaribooksonline.com/9780735626041 Click the Extras, you can get the samples and database from Supplemental Content.
And there are vast of valuable articles and SQL Server Reporting Services Books Online in MSDN ,you can click these link to begin your learning journey, SQL Server Reporting Services 2008 Books Online:
http://msdn.microsoft.com/en-us/library/ms159106(v=SQL.100).aspx
Besides these, there are still many valuable videos in Microsoft Webcast, click this link
https://msevents.microsoft.com/cui/SearchDisplay.aspx?culture=en-US#culture=en-US;eventType=0;sortKey=;sortOrder=;pageEvent=false;hdnInitialCount=;searchcontrol=yes;kwdAny=Reporting%20service to register with a windows live ID, then download the ones you
want.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Help needed in plotting Line Graph!!!!!!!!!Pls help!!

Hi, i need help in plotting a simple line graph showing the x&y axis and has to plot 3 different lines in the same graph.I have written a program and i need to implement this graph in it.Is there any tutorial for plotting line graphs,i mean steps included.
Please help!

You describe your need, but not where it originates from.
Is it a programming assignment? If so, I hope this is not your chosen major, as you will fail because you are a non-resourceful plagarist.
Do you need to simply graph some data? Use an existing package. There are free ones somewhere.
What do you mean "i have written a program and i need to implement this graph in it"? If you wrote the program, wouldn't you be done?
Enjoy programming

Help needed in plotting line graph!

Hi i need help in plotting a line graph complete with both axes shown,plus the legend on the side shown.
Pls help!!!!
rgds

Here's a simple line graph applet I did some time backimport java.awt.*;
public class LineGraff extends java.applet.Applet{
   double []toGraff = {6.0, -14.0, -164.0, -210.0, 108.0, 770.0,
                            1354.0, 896.0, -572.0, -1348.0, -780.0, -108.0};
   double []numsFromFile = {6.0, -14.0, -164.0, -210.0, 108.0, 770.0,
                            1354.0, 896.0, -572.0, -1348.0, -780.0, -108.0};
   int max, min, size, Hscale;
   double Vscale;
   public void init(){
      size = numsFromFile.length-1;
      java.util.Arrays.sort(numsFromFile);
      max = (int) numsFromFile[size];
      min = (int) numsFromFile[0];
      Vscale = max-min;
      Vscale = 200/Vscale;
     Hscale = Math.round(300/size);
   public void paint(Graphics g) {
      g.setFont(new Font("Arial",0,14));
      g.drawString("Example app: drawing a graph from a double array",25,18);
      g.setFont(new Font("Arial",0,10));
      g.setColor(Color.blue);
      g.fillRect(10,20,365,230);
      g.setColor(Color.cyan);
      g.drawLine(25,25,25,225);
      g.drawLine(25,140,330,140);
      g.setColor(Color.white);
      int intA = 30, intB = 0, intC = 0;
      int intD = (int) (Math.round(140 - (Vscale * toGraff[0])));
         for(int i=1; i <= size; i++) {
           intC = intA + Hscale;
           intB = intD;
           intD = (int) (Math.round(140 - (Vscale * toGraff[ i ])));
           g.drawLine(intA, intB, intC, intD);
              if(toGraff[ i ] > 0)
                 g.drawString(Double.toString(toGraff[ i-1 ]), intA+6, intB-3);
              else
                 g.drawString(Double.toString(toGraff[ i-1 ]), intA+6, intB+8);
           intA += Hscale;
      g.drawString(Double.toString(toGraff[size]), intA+6, intD-3);
}

How do I change the line color in a line graph?

I used Illustrator to create a line graph. (Not my desired option as I normally import them from R and then edit, but the textbook wanted to show that you can create graphs and edit them in Illustrator)
Anyway, I did all of the editing except that I can't change the color of the line. My assignment requires me to match the textbook example and the textbook does not provide instructions on how to do it. I've done just about any method I can think of and the line still stays light gray. I'm almost willing to just give up and lose the points but something as simple as color can't be this hard, right? Right?

Whenever I try to shift+direct select it thinks I want to move the line, so as I shift + direct select and drag my mouse across the line (to highlight it all) it moves a chunk of the line and turns it into a near perpendicular line.
I found the appearance window, it just says "Path" (the color I want it to be that it's not)
"Stroke" 4pt
"Fill" (the color I want it to be that it's not)
"Opacity": Default
And some other buttons. I think I'll try the help line tomorrow, I know I saw a customer service number somewhere and I'm only here because the chat was unavailable. This is only one of my 3 problems with my assignment so I'll search here for answers to the other two. Learning new things is rarely fun.

11.1.1.5 - Measure labels are appearing in legend (line graph)

I've created a line graph in 11.1.1.5. My legend is showing a combination of the column value and the measure name (e.g. Web Sales, Direct Sales, Retail Sales). I want my legend to simply say Web, Direct, and Retail, without the appended 'Sales' measure label.
The Measure Labels tile is currently residing in the Vary Color By (Horizontal Axis) zone, along with the legend column, so I guess it makes sense that the legend column and the measure labels would both show up in the legend (although I don't think that was the case in 11.1.1.3). However, there doesn't appear to be any place into which I can relocate the Measure Labels tile so that the word Sales DOESN'T appear on the line graph. If I move the Measures Labels tile into Graph Prompts, Sections, or Group By (Horizontal Axis), the word Sales appears in those locations. If I attempt to move that tile into the Lines (Vertical Axis) box, or into the Excluded box, it won't allow being dropped there.
Switching between line, bar, and area graphs reveals the same problem in all graph types.
Is there any way to supress the display of measure labels on graphs in 11.1.1.5?

Hi Paul,
This is the feature in 11g obiee displaying the Measue heading and dimension value... like u said right Web Sales...and so on.
Here in u case web is the value of dimension and Sales is heading of a measure.
One way is if u are not using any dimension apart from 1 dim and fact u can put measure labels in the group by axis and dimension column in the show in legend section then it will give u only web.
But if u have 2 dimension then we have to put this measure labels with either one of the dimensions in this case heading of the measure wil display.
Thanks
Subhash

Marker Shape in Legend - Line Graph

Hello,
I have recently upgraded from 10g Release 1 to 10g Release 2.
I am using a line graph. In Release 1, the data marker shapes show up in the legend. In Release 2, they don't. In Graph.xml, I have set the Graph element to have the attribute markerShapeInLegend="true".
Does anybody else have this problem and/or know of a solution?
Thank you.

Hi Paul,
This is the feature in 11g obiee displaying the Measue heading and dimension value... like u said right Web Sales...and so on.
Here in u case web is the value of dimension and Sales is heading of a measure.
One way is if u are not using any dimension apart from 1 dim and fact u can put measure labels in the group by axis and dimension column in the show in legend section then it will give u only web.
But if u have 2 dimension then we have to put this measure labels with either one of the dimensions in this case heading of the measure wil display.
Thanks
Subhash

Printing a Line Graph in SAP

Hi Experts,
Can anybody tell me how to print line graph in SAP. I do not want use ALV print function for graph generation.
Here I am attaching you sample program for your reference. Name of the program is GFW_PROG_PRES_SHOW_MULT.
Thanks in Advance.
Regards,
Shaik.

Hi Meera,
you can use FM "GRAPH_MATRIX_3D' to print graphs. See if this works out good for your.
Simple code to use this would be as follows.
DATA: BEGIN OF itab_data OCCURS 0,
dataname(15),
quantity1 TYPE i,
quantity2 TYPE i,
quantity3 TYPE i,
END OF itab_data,
BEGIN OF itab_options OCCURS 0,
option(20),
END OF itab_options.
itab_data-dataname = 'Electricity'.
itab_data-quantity1 = 55.
itab_data-quantity2 = 62.
itab_data-quantity3 = 59.
APPEND itab_data.
itab_data-dataname = 'Gas'.
itab_data-quantity1 = 35.
itab_data-quantity2 = 52.
itab_data-quantity3 = 44.
APPEND itab_data.
itab_data-dataname = 'Water'.
itab_data-quantity1 = 18.
itab_data-quantity2 = 22.
itab_data-quantity3 = 19.
APPEND itab_data.
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
col1 = 'Jan'
col2 = 'Feb'
col3 = 'Mar'
titl = 'Gráfico Teste - Carlos'
TABLES
data = itab_data
opts = itab_options
EXCEPTIONS
OTHERS = 1.
Hope this helps.
Thanks
Sumit

Transparency fill in line graph data points does not copy over to Pages

I have created some line graphs in Numbers, and they look beautiful. Since some of my data overlap and I want users to be able to easily see where all data is on the graph, I have made the data points transparent on the foremost line. This allows the other line (which data points are filled in with another color) visible "through" the foremost line.
However, when I attempt to copy the graphs into Pages, the data points of the foremost line are no longer transparent - they are filled with white. Obviously, this defeats the entire purpose of using a transparency fill!
What can I do to make this work?
Thank you,
G. Pasarescu

Hi Yvan,
Thank you for the tip. Unfortunately, I need to embed several of these charts into the Pages document, and cannot use Numbers instead of Pages for the document.
Interestingly, if I copy the chart from Numbers and paste it into some graphics programs (like Pixen and Pixelator), the transparency is preserved. However, pasting the same copy into other graphics programs (such as Seashore or Photoshop) somehow flattens the image, removing the transparency, and I'm back to square one.
Using a graphics program as the bridge between Numbers and Pages reduces the quality of the chart - that's why I'd like to try to make this work in Numbers / Pages.
Thanks,
Geoff

BI Publisher 11g. Plotting multiple lines in a line graph

Hi,
We have a requirment where we need to show multiple lines in a line graph. I have gone through the earlier posts for this topic but when I am following the same steps I am not able to resolve the problem.
I have 3 mterics: Month (which will be X-axis) , Size (Which will be on y-axis) and Name. I have names for 10 tables and i want to display 10 lines in my line graph.
In the chart generator, I am using Month in "Labels", Table name for "color" field" and size in the "values" section.
When I am trying this I am geting the following error in chart generator. It says " The data required 2 columns. The data has only 1 column." To trick the system, I also put a dummy column with static value of 1, but then also i am getting the same error, that it requires 2 columns.
the sample XML for the chart is like this:
<G_2>
<TABLE_SIZE_TRENDS>43.90832000000001</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table1</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
- <G_2>
<TABLE_SIZE_TRENDS>69.62872</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table2</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
It looks pretty straightforward but I am stuck in it for quite some time now.
All your guidance is greatly appreciated in this regard.
Regards,
Aakarsh

any help? still need help. thanks

How do I get a two line graph to show all the months in the data table and not just every second one?

My two line graphs covers six months, but only shows three months How can I make it show all six months

select the chart, then open the Chart Formatter:
Then click "Axis", then "Category (X)"
Change the "Label Angle" to "Left Vertical" or "Right Vertical"

Creating a Double Line Graph

Hello,
I'm trying to create a graph from the information seen in the table below. I need to plot on the X- Axis, the T0,T1,T2 values. There will be two data sets for the line graph, Subject A and Subject B, the value from which will be plotted on the Y-Axis. I've spent about an hour now, trying to order the values to create the graph I need.
Another way of saying this, is that I'm plotting the differences in Subject A versus Subject B over a period of Time (T0, T1, T2).
It should look something like this:
Help Please!
-KB

Hi KBaines,
Please don't worry about wasting anyone's time. Many users in this forum look upon Numbers problems as a challenge. If you solved your own problem, please post your solution to help others.
Regards,
Ian.

Graphing a RUNNING TOTAL on a line graph

So I'm having a lot of trouble putting my data on a chart. I have it all laid out here: files.me.com/redsteven1/glwk4v.numbers.zip
Whenever I try to graph it though I run into a whole host of problems. Namely, that I can't get the values to plot on the chart at all.
Not sure what the problem is... I select A2:G103... and I see the different series (for each Activity) show up in the legend, but nothing is plotted on the chart.
I know that much of the table is blank... that's because I'll be adding to it every day.
Ideally, the X-axis should be time/date.... May, June, July, and August can be the major tick marks. And the Y-axis would be number of hours spent on each activity.
To further complicate things, the chart should really be a running total of time spent on each activity... so if I spend an hour on Activity 1 each day for 3 days... then on the third day I should have a plot of 3 hours... not 1.
I know I didn't work things super well here... hopefully you can figure out what I mean by looking at the linked file : \
Thanks in advance.

I guess that line graph isn't the best one, I would use the Scatter one.
You can't chart your datas as they are at this time.
Every datas are date_time or duration values which can't be charted as is.
Here, I converted the dates from column A into strings
Then I added 6 columns in which I converted the durations into decimal hours.
The original columns are hidden.
The formula used to convert is a simple one.
In H2, I inserted :
=STRIPDURATION(B)*24
Fill to the right
Fill Down
to fill the other cells.
Yvan KOENIG (VALLAURIS, France) dimanche 22 mai 2011 21:26:18
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Need Help with creating Line Graph Chart

I have the following XML Data
<DATA>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Longview</BRANCHDESC>
<LOCATION>30</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>99.9</VALUECURRENTPERIOD>
<QUARTERVALUE>100</QUARTERVALUE>
<YTDVALUE>100</YTDVALUE>
<STDCURRENTPERIOD>99.2</STDCURRENTPERIOD>
<VARIANCE_STD>-.7</VARIANCE_STD>
<VARIANCE_STD_PERCENT>-.7</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>99.97</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>100</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Oakland</BRANCHDESC>
<LOCATION>31</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>100</VALUECURRENTPERIOD>
<QUARTERVALUE>100</QUARTERVALUE>
<YTDVALUE>100</YTDVALUE>
<STDCURRENTPERIOD>100</STDCURRENTPERIOD>
<VARIANCE_STD>0</VARIANCE_STD>
<VARIANCE_STD_PERCENT>0</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>100</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>100</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Seattle</BRANCHDESC>
<LOCATION>32</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>12.4</VALUECURRENTPERIOD>
<QUARTERVALUE>18.7</QUARTERVALUE>
<YTDVALUE>18.7</YTDVALUE>
<STDCURRENTPERIOD>-2527.7</STDCURRENTPERIOD>
<VARIANCE_STD>-2540.1</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.5</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>18.7</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>37.2</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>6.5</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Yakima</BRANCHDESC>
<LOCATION>33</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>36.4</VALUECURRENTPERIOD>
<QUARTERVALUE>68.2</QUARTERVALUE>
<YTDVALUE>68.2</YTDVALUE>
<STDCURRENTPERIOD>-5517.2</STDCURRENTPERIOD>
<VARIANCE_STD>-5553.6</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.7</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>68.17</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>68.6</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>99.5</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Twin Falls</BRANCHDESC>
<LOCATION>34</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>100</VALUECURRENTPERIOD>
<QUARTERVALUE>99.8</QUARTERVALUE>
<YTDVALUE>99.8</YTDVALUE>
<STDCURRENTPERIOD>100</STDCURRENTPERIOD>
<VARIANCE_STD>0</VARIANCE_STD>
<VARIANCE_STD_PERCENT>0</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>99.8</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>99.4</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>100</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
<PERCENT_ROW>
<YEAR>2007</YEAR>
<PERIOD>3</PERIOD>
<MATERIAL_TYPE>C</MATERIAL_TYPE>
<BRANCHDESC>Spanish Fork</BRANCHDESC>
<LOCATION>35</LOCATION>
<QUARTERDESC>Quarter 1</QUARTERDESC>
<CURRPERIOD>Mar 2007</CURRPERIOD>
<VALUECURRENTPERIOD>7.7</VALUECURRENTPERIOD>
<QUARTERVALUE>10.2</QUARTERVALUE>
<YTDVALUE>10.2</YTDVALUE>
<STDCURRENTPERIOD>-6016.2</STDCURRENTPERIOD>
<VARIANCE_STD>-6023.9</VARIANCE_STD>
<VARIANCE_STD_PERCENT>100.1</VARIANCE_STD_PERCENT>
<CURRENT_12MMA>10.23</CURRENT_12MMA>
<PRIOR_12MMA>0</PRIOR_12MMA>
<CURRPERSUB1>Feb 2007</CURRPERSUB1>
<VALUECURRENTPERIODSUB1>14.9</VALUECURRENTPERIODSUB1>
<CURRPERSUB2>Jan 2007</CURRPERSUB2>
<VALUECURRENTPERIODSUB2>8.1</VALUECURRENTPERIODSUB2>
<CURRPERSUB3>Dec 2006</CURRPERSUB3>
<VALUECURRENTPERIODSUB3>0</VALUECURRENTPERIODSUB3>
<CURRPERSUB4>Nov 2006</CURRPERSUB4>
<VALUECURRENTPERIODSUB4>0</VALUECURRENTPERIODSUB4>
<CURRPERSUB5>Oct 2006</CURRPERSUB5>
<VALUECURRENTPERIODSUB5>0</VALUECURRENTPERIODSUB5>
<CURRPERSUB6>Sep 2006</CURRPERSUB6>
<VALUECURRENTPERIODSUB6>0</VALUECURRENTPERIODSUB6>
<CURRPERSUB7>Aug 2006</CURRPERSUB7>
<VALUECURRENTPERIODSUB7>0</VALUECURRENTPERIODSUB7>
<CURRPERSUB8>Jul 2006</CURRPERSUB8>
<VALUECURRENTPERIODSUB8>0</VALUECURRENTPERIODSUB8>
<CURRPERSUB9>Jun 2006</CURRPERSUB9>
<VALUECURRENTPERIODSUB9>0</VALUECURRENTPERIODSUB9>
<CURRPERSUB10>May 2006</CURRPERSUB10>
<VALUECURRENTPERIODSUB10>0</VALUECURRENTPERIODSUB10>
<CURRPERSUB11>Apr 2006</CURRPERSUB11>
<VALUECURRENTPERIODSUB11>0</VALUECURRENTPERIODSUB11>
</PERCENT_ROW>
</DATA>
Note that each Branch_Desc has 12 periods called CURRPERIOD,CURPERSUB1,CURPERSUB2 ...... and 12 values for those periods as VALUECURRENTPERIOD, VALUECURRENTPERIODSUB1, VALUECURRENTPERIODSUB2......
I need to create a Line Graph for each Branch for the 12 periods as defined above where VALUECURRENTPERIOD, VALUECURRENTPERIODSUB1 etc. are the values for that period. The current BIPublisher Chart tool only allows one Value and One Label. In my case I have 12 VALUES (VALUECURRENTPERIOD etc.) and 12 LABELS (CURRPERIOD, CURPERSUB1 etc.). The SERIES or LEGEND should be the Branch Desc . So what I am looking for is to plot values(12 values) for 6 branches (so six lines) over a period of time (12 periods).

Hi Tim,
We have this XML data calculated from several tables where the layout was in the format of One account(a Branch in this case) and 12 periodic values for the same . So reformatting the XML is not going to be easy as the source data is like this itself. I tried un-pivioting the table (as this one is already pivoted) but it looks like Oracle doesn't support this feature yet, but is suported in DB2 or SQL. Please take a look at this link
http://blogs.ittoolbox.com/database/technology/archives/unpivot-query-12798?close=true
So I am stuck with the data in this format and users want a line graph for each branch over he period of time. May be somone on this forum can figure out how to un-pivot a table in Oracle. Thanks for your help in advance.

Percentages in 2D line graph

Similar Messages

Maybe you are looking for