Performance Check in Client transport

What is This performance check in Client Transport?

Hi
Remote client copy: Before the client copy process is started, a consistency check is automatically made. If inconsistencies are detected, the copy process is not started and an error message is logged. You can also perform the consistency check yourself with the RFC System Comparison pushbutton.
Client transport: If an RFC connection can be established between the systems, you can use the report RSCLICHK to compare the structures. If they differ, transport errors and inconsistencies may occur. You can run the program directly in the transaction SCC8 with the RFC System Check pushbutton.
Pls see this link.
http://help.sap.com/saphelp_sm32/helpdata/en/99/0a2a8e7e2511d2a6250000e82deaaa/content.htm
Thanks.

Similar Messages

Advantages and Dsadvantages of Remote Client Copy over Client Transport...

Can anybody explain the Advantages and Dsadvantages of Remote Client Copy over Client Transport...
Thanks in Advance

Advantages of Remote client copy over client transport
1. Client-specific data as well as cross-client customizing can be copied to the target client, this is not the same in client transport.
2. The prerequisites for performing a remote client copy are that an RFC connection has to exist whereas client transport do not need RFC connection
3. The copy can be performed in parallel with several processes.
4. Remote client copy automatically performs a consistency check on the tables being copied,for client transport performance check need to be done.
5. A remote client copy is easy to use and does not require file system space on
operating system level whereas Client transport require lot of space as files are created at OS level.
Disadv
1. A remote client copy does not create a file at the operating system level,
so there is no hard copy of the client to be copied. Therefore, the same,
identical client copy cannot be duplicated at a later time.Client transport creates import and export files at Os levels
2. To be able to copy all data during the client copy, the structures of all copied
tables in both systems must be identical.
3. An automatic repository consistency check is performed in Remote client copy and if inconsistencies are detected, the client copy is terminated and an error message is displayed.
4. You cannot copy the remote client data and use it whereas in client transport you can copy the files in a cd (like import files, export files)
Also see notes
47502
557132
Rakesh

Client Transport

Hi
Iam doing client transport in the same system.i.e the SID of my system is DEV.(Iam giving the source system and target system the same).By scc8 T-CODE i have succesfully completed client export and datafiles and controlfiles even got stored at operating system level.
But when i go to STMS->import queue of DEV system the status of change request in the import queue is RED and it says "The request will not be transported".How can this problem be solved ?

Hi Dahran,
SCC7 is for post import.
first you have to import the transports generated during the export into your client.
STMS. Go to your import queue and choose in the menu
Extras ->Other requests add
Fill in the transport number of one of the generated transports during the export. (something like <SID>KX0000x)
<b>After</b> the import you have to perform the SCC7

Performance checking inside the source code

performance checking inside the source code who to check it.
thanks and regards
chandra sekhar

I guess you are asking how to check it, then here is the answer
SQL Trace transaction ST05
The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use

Performance Check - ABAP and Database color bars

Hello everyone,
When i go for the performance check of my object, i see Database in red bar and ABAP in green bar.
The smaller the difference between these two bars, the better.
But what does the color mean ? ( Somethimes the smaller bar is Red )
Thanks

Here is the explanation (depends % of total) in [sap library - SE30|http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/617d2ae68c11d2b2ab080009b43351/frameset.htm]
>
shalaxy s wrote:
> The smaller the difference between these two bars, the better.
NO, it depends completely of what does your program!

Checking for client-side FW from VPN3000

Can I customize the firewall that the VPN3000 checks connecting clients for? Like and I specify a certain executable that must be running to allow the tunnel to be established or do something along those lines?

No, It not possible through VPN300.
Try this link:
http://www.cisco.com/warp/public/110/pix3000.html

Client transport from one sap system to another one

When I want to make a client transport from one sap system to another (i.e. the source system is a system without a enhancement package and the destination system is with ehp5) can it be that there come critical conflicts in the modules (like FI, CO or HCM or other ones)?

Hi Damian,
It is not recommanded to import TRs from SAP system not at equal level.
Get both the systems at same level if possible.
But still if you have senario like this , pls ask to transport owner about changes included to undersatnd criticallity
Regards,

Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Performance check for status control table

Hi,
When ever we activate any ODS or delete the request ,a message 'Performance Check for Status control Table ' appears.
What does it mean?Please explain what is status control table and how it performs?
Thanks & Regards,
Dinakar.

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Cross-client transports in ChRM.

Dear SolMan Gurus!
How to handle cross-clients transport request in change request management. Is it in the way that no matter how do I set may landscapen = transport routes, than all cross-client transports go to the cliet 000? Do I need any additional setting in SolMan Change Req. Man.?
Thank you for you reply.
Best regards,
Petr Syka

Hi Suker,
There are two ways to transport your Workbench/ Customizing request from one client to the other, The detail are as below:
1. SCC1: Create a transport request for the task done. Move to the target client and enter the tcode: scc1. Specify the transport request and upload it. The data will be transfered.
2. BC Sets: Create BC Set for the Cutomization done and upload it to the target system.
Award points if useful.
Regards,
Madhu Sudhanan

Client transport in EP

Hi Experts,
i am new to EP environment, i want to know client creation, client copy and client transport in EP.
Whether it is same as Basis envinorment or different.
Please give me detailed information.
Regards,
Reddy K

Dear Reddy
As stated above, there is no concept on clients in the portal environment.
However, your portal environment can call data from the different clients in the abap environment.
You can define JCO Destinations that connect to your abap instance and there you also specify the client to which the conncetion has to be made.
So in fact you have the functionality of your portal available for all the clients that are maintained in your abap environment.
Reward point if useful.
Kind regards
Tom
Edited by: Tom on Feb 1, 2008 9:22 AM

Set Safari To Always Perform Check If Default Browser When Starting

I want to set Safari to always perform check if it is the default browser every time it starts.
The first time I opened Safari, I asked it not to check to see if it is the default browser. Now, I do not find any way to change that setting back to ask it to perform this check every time Safari starts.
Message was edited by: Yank7

HI,
You can change that setting by going to Safari/Preferences and select the General tab.
Click the pop up menu where you see: Default web browser
*"perform this check every time Safari starts"*
If you click the Safari icon in your Dock, it's going to open Safari regardless, same with Firefox or any other browser you might use. Once it's launched, there's no option available.
Carolyn

What is the defferent between client copy and client transport

what is the defferent between client copy and client transport?
give me the steps that how to make a applications data copy from production to QAS.
thanks
priyan

Hi,
what is the defferent between client copy and client transport?You better google it..!
here is the result..
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctscco/bcctscco.pdf
Follow the standard procedure of System Copy from PRD => QAS :
Download guide as per your release:
http://service.sap.com/systemcopy
What is Systemcopy:
http://help.sap.com/saphelp_rc10/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/frameset.htm
Regards;

Performance check for badi

hai,
i wrote programe of badi including select query when i check for performance check then i watch for badi programe for performance analysis
if possible can i c it where ok
any one help me

hI,
you can refer these links :
http://www.sapgenie.com/abap/performance.htm
<b>Reward points</b>
Regards

Performance check keeps repeating

My A665-S6056 was just factory restored, but upon completion it started its performance check, and has been completing it roughly every 10-15 minutes, for the last 15 hours. Is there anyway to stop this without a hard shutdown?

Because you've just done a recovery, you may just want to hard shutdown and perform another recovery.
- Peter

Performance Check in Client transport

Similar Messages

Maybe you are looking for