Performance issue with XI interfaces - Help Needed
Hi all,
We are having idoc->xi->file. We have the design of collecting the idocs as the standard example BpmPatternCollectTime.
We have given the collection time of say 5minutes after the first idoc hits the BPM process. The issue is that the idoc messages are getting missed when we are sending 1000 idocs. Also after applying the note 898131 for the correction of missing idocs we got the problem of the timeout exception not being triggered and workflow instance is waiting for a longtime until all the messages are getting into BPM and is getting struck in the queue.
We are into XI 3.0 SP13. Can anyone provide some help in optimizing the interfaces/server settings/etc..
Thanks in advance.
Jayakrishnan
Hi Jayakirshnan,
check if this helps, whether you have optimal number of dialog processes.
see theselinks as well
Re: BPM is slow in sending Idocs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap exchange infrastructure tuning guide xi 3.0.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
Regards
Vishnu
Similar Messages
-
Performance issue on query. Help needed.
This is mainly a performance issue. I hope someone can help me on this.
Basically I have four tables Master (150000 records), Child1 (100000+ records), Child2 (50 million records !), Child 3 (10000+ records)
(please pardon the aliases).
Now every record in master has more than one corresponding record in each of the child tables (one to many).
Also there may not be any record in any or all of the tables for a particular master record.
Now, I need to fetch the max of last_updated_date for every master record in each of the 3 child tables and then find the maximum of
the three last_active_dates obtained from the 3 tables.
eg: for Master ID 100, I need to query Child1 for all the records of Master ID 100 and get the max last_updated_date.
Same for the other 2 tables and then get the maximum of these three values.
(I also need to take care of cases where no record may be found in a child table for a Master ID)
Writing a procedure that uses cursors that fetches the value from each of the child table hits performance
badly. And thing is I need to find out the last_updated_date for every Master record (all 150000 of them). It'll probably take days to do this.
SELECT MAX (C1.LAST_UPDATED_DATE)
,MAX (C2.LAST_UPDATED_DATE)
,MAX (C3.LAST_UPDATED_DATE)
FROM CHILD1 C1
,CHILD2 C2
,CHILD3 C3
WHERE C1.MASTER_ID = 100
OR C2.MASTER_ID = 100
OR C3.MASTER_ID = 100
I tried the above but I got a temp tablespace error. I don't think the query is good enough at all.
(The OR clause is to take care of no records in any child table. If there's an AND, then the join and hence select will
fail even if there is no record in one child table but valid values in the other 2 tables).
Thanks a lot.
Edited by: user773489 on Dec 16, 2008 11:49 AMNot sure I understand the problem. The max you are getting from the above is already the greatest out of the three - that's why we do the UNION ALL.
Here's sample code without output, maybe this will clear it up:
with a as (
select 10 MASTER_ID, to_date('12/15/2008', 'MM/DD/YYYY') LAST_DTE from dual UNION ALL
select 20 MASTER_ID, to_date('12/01/2008', 'MM/DD/YYYY') LAST_DTE from dual UNION ALL
select 30 MASTER_ID, to_date('12/02/2008', 'MM/DD/YYYY') LAST_DTE from dual
b as (
select 10 MASTER_ID, to_date('12/14/2008', 'MM/DD/YYYY') LAST_DTE from dual UNION ALL
select 20 MASTER_ID, to_date('12/02/2008', 'MM/DD/YYYY') LAST_DTE from dual UNION ALL
select 40 MASTER_ID, to_date('11/15/2008', 'MM/DD/YYYY') LAST_DTE from dual
c as (
select 10 MASTER_ID, to_date('12/07/2008', 'MM/DD/YYYY') LAST_DTE from dual UNION ALL
select 30 MASTER_ID, to_date('11/29/2008', 'MM/DD/YYYY') LAST_DTE from dual UNION ALL
select 40 MASTER_ID, to_date('12/13/2008', 'MM/DD/YYYY') LAST_DTE from dual
select MASTER_ID, MAX(LAST_DTE)
FROM
(select MASTER_ID, LAST_DTE from a UNION ALL
select MASTER_ID, LAST_DTE from b UNION ALL
select MASTER_ID, LAST_DTE from c)
group by MASTER_ID;
MASTER_ID MAX(LAST_DTE)
30 02-DEC-08
40 13-DEC-08
20 02-DEC-08
10 15-DEC-08
4 rows selectedEdited by: tk-7381344 on Dec 16, 2008 12:38 PM -
Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW
Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
QadeerHi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv -
Performance Issue with BSIS(open accounting items)
Hey All,
I am having serious performance issue with a accrual report which gets all open GL items, and need some tips for optimization.
The main issue is that I am accesing large tables like BSIS, BSEG, BSAS etc without proper indexes and that I am dealing with huge amounts of data.
The select itself take a long time and after that as I have so much data overall execution is slow too.
The select which concerns me the most is:
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
INTO TABLE i_bsis
FROM bsis
WHERE bukrs = '1000'
AND hkont in r_hkont
AND budat <= p_lcdate
AND augdt = 0
AND augbl = space
AND gsber = c_ZRL1
AND gjahr BETWEEN l_gjahr2 AND l_gjahr
AND ( blart = c_re "Invoice
OR blart = c_we "Goods receipt
OR blart = c_zc "Invoice Cancels
OR blart = c_kp ). "Accounting offset
I have seen other related threads, but was not that helpful.
We already have a secondary index on bukrs hkont and budat, and i have checked in ST05 that it does use it. But inspite that it takes more than 15 hrs to complete(maybe because of huge data).
Any Input is highly appreciated.
ThanksThank you Thomas for your inputs:
You said that R_HKONT contains several ranges of account numbers. If these ranges cover a significant
portion of the overall existing account numbers, then there is no really quick access possible via the
BSIS primary key.
Unfortunately R_HKONT contains all account numbers.
As Rob said, your index on HKONT and BUDAT does not help much, since you are selecting "<=" on
BUDAT. No chance of narrowing down that range?
Will look into this.
What about GSBER? Does the value in c_ZRL1 provide a rather small subset of the overall values? Then
an index on BUKRS and GSBER might be helpful.
ZRL1 does provide a decent selection . But I dont know if one more index is a good idea on overall
system performance.
I assume that the four document types are not very selective, so it probably does not pay off to
investigate selecting on BKPF (there is an index involving BLART) and joining BSIS for the additional
information. You still might want to look into it though.
I did try to investigate this option too. Based on other threads related to BSIS and Robs Suggestion in
those threads I tried this:
SELECT bukrs belnr gjahr blart budat
FROM bkpf INTO TABLE bkpf_l
WHERE bukrs = c_pepsico
AND bstat IN (' ', 'A', 'B', 'D', 'M', 'S', 'V', 'W', 'Z')
AND blart IN ('RE', 'WE', 'ZC', 'KP')
AND gjahr BETWEEN l_gjahr2 AND l_gjahr
AND budat <= p_lcdate.
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
FROM bsis INTO TABLE i_bsis FOR ALL ENTRIES IN bkpf_l
WHERE bukrs = bkpf_l-bukrs
AND hkont IN r_hkont
AND budat = bkpf_l-budat
AND augdt = 0
AND augbl = space
AND gjahr = bkpf_l-gjahr
AND belnr = bkpf_l-belnr
AND blart = bkpf_l-blart
AND gsber = c_zrl1.
The improves the select on BSIS a lot, but the first select on BKPF kills it. Not sure if this would help
improve performance.
Also I was wondering whether it helps on refreshing the tabe statistics through DB20. The last refresh
was done 7 months back. How frequently should we do this? Will it help? -
Performance issue with view selection after migration from oracle to MaxDb
Hello,
After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
Does anybody know about this problem and how to solve it ??
Best regards !!!
Gert-JanHello Gert-Jan,
most probably you need additional indexes to get better performance.
Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
Best regards,
Melanie Handreck -
Performance issue with MSEG table
Hi all,
I need to fetch materials(MATNR) based on the service order number (AUFNR) in the selection screen,but there is performance isssue with this , how to over come this issue .
Regards ,
AmitHi,
There could be various reasons for performance issue with MSEG.
1) database statistics of tables and indexes are not upto date.
because of this wrong index is choosen during the execution.
2) Improper indexes, because there is no indexes with the fields mentioned in the WHERE clause of the statement. Because of this reason, CBO would have choosen wrong index and did a range scan.
3) Optimizer bug in oracle.
4) Size of table is very huge, archive.
Better switch on ST05 trace before you run this statements, so it will give more detailed information, where exactly time being spent during the execution.
Hope this helps
dileep -
BPC 7 performance issue with Microsoft 2003 vs Microsoft 2007
Hi All,
Needs some help with our performance issues with BPC 7 on Microsoft 2007. We have noticed a significant difference between the two versions. When running the same report on BPC 7 MS 2003 it takes roughly around 5-6 min. When running the same report in BPC 7 MS 2007 the report takes roughly 15-20 min. We've tried numerous things to figure out what can be causing this but does anyone have the same issue or shed some light as to what i can do to eliminate this problem?
Thanks,
ElmerHi,
Did you install the following component on your application server (which is a prerequisite for running Excel 2007)? This note is part of the installation guide:
In order for the software to function correctly in Excel 2007, you must install the Microsoft Office 2007 system driver Data Connectivity Components, which you can get from the Microsoft web site. The components must be installed on the Application server. We recommend that you install all of the latest Microsoft Windows hotfixes prior to installing the Administration client. For information about which hotfixes to install, see http://www.microsoft.com/downloads/details.aspx?FamilyID=7554F536-8C28-4598-9B72-EF94E038C891&DisplayLang=en.
Hope this will help.
Kind Regards,
Patrick -
Hi,
I am having serious performance issue due to BSEG table .I am having a change request in which I have to solve the performance issue with regard to BSEG. The situation was that previously they had used select * on both BKPF and BSEG. I removed the select * and selected only those fields which are required as shown below. I also tried using cursors. But the problem is happening in the TEST server where BSEG is having more than 1 crore entries. I have gone through some threads but still not able to understand how to solve this problem. Please help
select bukrs belnr gjahr bldat bstat from bkpf into table T_BKPF_p
WHERE BUKRS IN sd_bukrs AND
BLDAT < s_bldat-low
and BSTAT = ' ' .
select bukrs belnr gjahr shkzg dmbtr hkont from bseg into table T_BSEG_C
FOR ALL ENTRIES IN t_BKPF_p
WHERE BUKRS = T_bkpf_p-bukrs
AND BELNR = T_bkpf_p-belnr
AND GJAHR = T_bkpf_p-gjahr
AND HKONT = SKB1-SAKNR.Hi Kunal,
Here is my take on your issue.
In your select statement on BKPF you are selecting every BKPF record for a specified company code and blank document status that was created before a specified date. If your company has implemented SAP 10 years ago, and your user enters todays date and leaves the company code field blank you will effectively be retrieving almost all the records from BKPF (excluding the ones created today or those with non-blank document status). This would effectively be a huge amount of data. After that you are looking for the corresponding BSEG records for all the records that you have selected in BKPF.
My question to you is why do you need to look at all the records before a given date? Why not ask the user to enter a smaller date range and make the document date and the company code a mandatory entry? You do not have to look at 10 years worth of data especially if you are running this online (as opposed to in the background).
Your BSEG select looks correct. There is very little that you can do except for adding BUZEI to the field list. If you use for all entries and do not include the entire primary key you could lose data.
TABLES: bkpf,
skb1.
SELECT-OPTIONS: s_bldat FOR bkpf-bldat OBLIGATORY,
sd_bukrs FOR bkpf-bukrs OBLIGATORY.
TYPES: BEGIN OF ty_bkpf,
bukrs TYPE bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr TYPE bkpf-gjahr,
bldat TYPE bkpf-bldat,
bstat TYPE bkpf-bstat,
END OF ty_bkpf,
BEGIN OF ty_bseg,
bukrs TYPE bseg-bukrs,
belnr TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
buzei TYPE bseg-buzei,
shkzg TYPE bseg-shkzg,
dmbtr TYPE bseg-dmbtr,
hkont TYPE bseg-hkont,
END OF ty_bseg.
DATA: t_bkpf_p TYPE TABLE OF ty_bkpf,
t_bseg_c TYPE TABLE OF ty_bseg.
SELECT bukrs
belnr
gjahr
bldat
bstat
FROM bkpf
INTO TABLE t_bkpf_p
WHERE bukrs IN sd_bukrs
AND bldat IN s_bldat
AND bstat EQ space .
IF NOT t_bkpf_p[] IS INITIAL.
SELECT bukrs
belnr
gjahr
buzei
shkzg
dmbtr
hkont
FROM bseg
INTO TABLE t_bseg_c
FOR ALL ENTRIES IN t_bkpf_p
WHERE bukrs EQ t_bkpf_p-bukrs
AND belnr EQ t_bkpf_p-belnr
AND gjahr EQ t_bkpf_p-gjahr
AND hkont EQ skb1-saknr.
ENDIF. -
Performance Issue with SXMB_MONI
Hi All,
I have a typical performance issue with SXMB_MONI, when I trigger this T.code it is taking around 20-24 hrs to execute.
Here I have found some tables which actually stores these processed xml messages,
SXMSPFADDRESS
SXMSPFRAWH
RSXMB_REMOTE_SERVICE
SXMSPFAGG
SXMSCONFVL
SXMSPMAST
SXMSPEMAS, SXMSPERROR, SXMSPMAST & SXMSPVERS.
SXMSPMAST, SXMSPMAST2, SXMSCLUR, SXMSCLUR2,
SXMSCLUP, SMXSLUP2, SXMSPFRAWH,
Here I want to increase the performance of sxmb_moni, firstly I want to know from which tables does the sxmb_moni fetches data and more over is it a single table or multiple table.
And please suggest any technique which can decrease the latency time in executing sxmb_moni.
Regards,
Vijay NHi,
Periodically you need to archive the XI messages, that allows you to maintain sufficient performance level.
Create archive jobs in SXMB_ADM to archive data which is 15 days old from XI related growing tables like SXMSCLUR, SXMSPEMAS, SXMSPHIST, SXMSPMAST, SXMSPVERS, SXMSPFRAW ,SWWWIHEAD. This archive job created archive files at the OS Level
For XI tables refer
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
SXMSPMAST, SXMSCLUP, SXMSPCLUR
the last two are cluster tables
and you won't get XML messages directly from them
have a look inside them
The classes that reads this information in SXMB_MONI are abap classes,
(can be seen at SE24) it is quite difficult to use them,
you might debug SXMB_MONI or use SE30 and see all the classes
that have been used.
You can use value mapping if you are not looking at picking up values from application system.It is just like SM30 transcation.You can get the info under SAP XI->Design and Configuration->Configuration->Value Mapping.
Also see the
these tables,
/SAPDMC/LSOMAP Field Mapping
/SAPTRX/SCAOTMAP
/SAPTRX/SCCNDMAP /SAPTRX/SCEVTMAP
/SAPTRX/SCFUNMAP /SAPTRX/SCSOMAP
/people/udo.martens/blog/2006/02/16/own-logging-of-xi-messages
message-mappings: stored in which database-table?
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
http://help.sap.com/saphelp_nw04s/helpdata/en/44/a1b46c4c686341e10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/45393c3eb3036be10000000a11402f/frameset.htm
Thanks
Swarup -
Performance issue with transaction MC50
I am not sure where to post this question. If I need to post it in another forum, please let me know.
We are having performance issues with transaction MC50. After reviewing SAP Note 457615 we created an index on mseg with the following fields: MANDT, MJAHR, MATNR, WERKS and SOBKZ.
When running an explain on the sql statement, the database is using a different index. This index has the following fields MANDT, MATNR, WERKS, LGORT, BWART and SOBKZ.
The sql statement is ( sql trace from ST05):
SELECT * from mseg WHERE "MANDT" = '400' AND "MJAHR" BETWEEN 2009 AND 2009 AND "MATNR" = '000000000054001121' AND "WERKS" = 'SAT' AND "SOBKZ" IN ( 'K' , 'V' , 'W' , 'O' , ' ' )
Is there any way to force the database to use the newly created index.
Thanks....Tommy
Edited by: Tommy Knight on Dec 8, 2009 2:24 PM
Edited by: Tommy Knight on Dec 8, 2009 3:07 PM
Edited by: Tommy Knight on Dec 8, 2009 3:08 PMHello Tommy,
at first your database release and patchset is missing.
If you are using Oracle 10g, the advice of Peter is useless, because of statistics are automatically collected by a CREATE INDEX.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_5010.htm#i2075657
COMPUTE STATISTICS
In earlier releases, you could use this clause to start or stop the collection of statistics on an index. This clause has been deprecated. Oracle Database now automatically collects statistics during index creation and rebuild. This clause is supported for backward compatibility and will not cause errors.
The other thing is - are you really sure that this SQL statements was executed with literals?
I know that on MSEG (with histograms) it is recommended sometimes, but i just want to be sure.
If you want us to help you - we need much more information .. please check sapnote #1257075 and upload the information to a webhosting platform, so that we can take a look at it.
Regards
Stefan -
Performance issues with Homesharing?
I have a Time Capsule as the base station for my wireless network, then 2 Airport Express setup to extend the network around the house, an iMac i7 as the main iTunes Library and couple of iPads, and a couple of Apple TVs. Everything has the latest software, but I have several performance issues with Home sharing. I've done several tests making sure nothing is taking additional bandwidth, so here are the list of issues:
1) With nothing else running, trying playing a movie via home sharing in an iPad 2 which is located on my iMac, it stops and I have to keep pressing the play button over and over again. I typically see that the iPad tries to download part of the movie first and then starts playing so that it deals with the bandwidth, but in many cases it doesn't.
2) When trying to play any iTunes content (movies, music, photos, etc) from my Apple TV I can see my computer library, but when I go in on any of the menus, it says there's no content. I have to reboot the Apple TV and then problem fixed. I's just annoying that I have to reboot.
3) When watching a Netflix movie on my iPad and with Airplay I send the sound to some speakers via Airplay through an Airport Express. At time I lose the connection to the speakers.
I've complained about Wifi's instability, but here I tried to keep everything with Apples products to avoid any compatibility issues and stay within N wireless technology, which I understood it was much more stable.
Has anyone some suggestions?Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim -
Performance Issues with large XML (1-1.5MB) files
Hi,
I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
I guess I'm running out of options and patience as well.;)
I would appreciate any ideas/suggestions, please help.....
Thanks;
Ramakrishna ChintaAre you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0
-
Performance issues with Bapi BAPI_MATERIAL_AVAILABILITY...
Hello,
I have a Z program to check ATP which is working with Bapi BAPI_MATERIAL_AVAILABILITY....
As I am in the retail system we have performance issues with this bapi due the huge amount of articles in the system we need to calculate the ATP.
any way to improve the performance?
Thanks and best regards
LThe BAPI appears to execute for only one plant/material, etc., at a time, so I would have to concentrate on making data retrieval and post-bapi processing as efficient as possible. In your trace output, how much of your overall time is consumed by the BAPI? How much by the other code? You might find improvements there...
-
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance issues with 0CO_OM_WBS_1
We use BW3.5 & R/3 4.7 and encounter huge performance issues with 0CO_OM_WBS_1? Always having to do a full load involving approx 15M records even though there are on the average 100k new records since previous load. This takes a longtime.
Is there a way to delta-enable this datasource?Hi,
This DS is not delta enabled and you can only do a full load. For a delta enabled one, you need to use 0CO_OM_WBS_6. This works as other Financials extractors, as it has a safety delta (configurable, default 2 hours, in table BWOM_SETTINGS).
What you should do is maybe, use the WBS_6 as a delta and only extract full loads for WBS_1 for shorter durations.
As you must have an ODS for WBS_1 at the first stage, I would suggest do a full load only for posting periods that are open. This will reduce the data load.
You may also look at creating your own generic data source with delta; if you are clear on the tables and logic used.
cheers...
Maybe you are looking for
-
Running Microsoft Office 2001 with Tiger vs Classic
Mac experts, Okay, I have a couple of questions. First, I recently installed Tiger 10.4 on my G3 laptop. Runs great eventhough I know I'm pushing the envelope with only 128 MB of memory and at 400 MHz speed. Anyhow, since I also run several programs
-
Is there any easier way to read 9i archive logs. I know the logminer has this capability. But it is very complicated. Is there any other way, if not can some basic steps how to use logminer. Thanks
-
BAPI - Webservice, Date-Format changed
Helly everyone, I've got a problem when creating a WS based uppon a BAPI (BAPI_FLIGHT_GETDETAIL). The Webservice itself works fine. But if I use the BAPI I need to use the Date-Format DD.MM.YYYY for the required Input-Field Flightdate. In the WS I ne
-
Hi, I have to inject traffic in a dot1q-tunnel and this has to happen in a redundant way. The structure of the underlying network is the following: There are 2 pairs of switches the first one consists of 2 Catalyst 6509-E which both belong to 1 mst r
-
Anamorphic Sequence to Widescreen DVD
I having been working on a quick three minute project in FCE 3.0. It was captured in hdv, then after it was edited, I placed it into a DV Anamorphic sequence and rendered it. However when I export the anamorphic sequence as a quicktime movie to burn