Performance monitor CF9 Windows 2008 R2 x64

When I enable the performance counters for coldfusion 9, I'm not able to add any counters in the performance monitor.
I can add counters in the 32 bit version of perfmon (mmc /32 perfmon.msc) but that is only because the CF9 performance counters seem to be incompatible with the 32 bit performance monitor.
The really weird thing is that when I tried to enable 1 single counter at a time they all worked, including the Coldfusion 9 counters.
The CF9 counters only work in combination with a few other counters;
.NET CLR Data
.NET CLR Networking
.NET Data Provider for Oracle
.NET Data Provider for SqlServer
.NET Framework
BITS
WmiApRpl
There is a bug tracked for what seems to be the same problem on Windows 7, this was closed but I dont know of any fix for this.
http://cfbugs.adobe.com/cfbugreport/flexbugui/cfbugtracker/main.html#bugId=83344
I would appreciate any help in the right direction.
Thanks for reading,
Jay

Hello,
Perhaps enable CFSTAT, CFadminUI > Debugging & Logging > Debug Output Settings > Enable CFSTAT .Do you get values for the same counters when using cfstat (eg C:\ColdFusion\bin>cfstat 5)?
CFSTAT uses similar counters as CF Performance Monitor.
HTH, Carl.

Similar Messages

Certification for Windows 2008 R2 x64

Hi,
My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.
Is there a date for this support/availability?
Thanks,
Fernando.

My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
OMS 11G is not available for Windows 64 bit. However you can use 64 bit windows for repository databases.
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.Please select 11G OMS from the dropdown , certification information for 11G is also available in the note.
Is there a date for this support/availability?Please keep checking otn.oracle.com for availability.
Regards
Rajesh

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Jinitiator & IE8 On Windows 2008 R2 x64 Server - Please Help!

Hello All -
I am wrapping up configuration of a Citrix Xenapp server for a presentation to my manager. The ONLY thing that I cannot get working is jinitiator for our Oracle apps. It is running on IE8 on WIndows 2008 R2 x64.
I have done a lot of research and replace jvm.dll from Java, but haven't been able to get that to work. My guess is that it's either because I'm downloading the incorrect version of Java (which I extract the .jvm file from) or that i'm running x64.
Please give any suggestions to help. I've spent hours on this project and if I cannot figure this out and have to go back to a different version of OS, then it's all lost -
Thanks!

801574 wrote:
Great - Thanks.
Will this need to be something that it installed/configured on my machine with IE8 installed or will changes need to be made to the actual Oracle server? We don't manage the server so hopefully it will be the client end.
Thank YouAs long as you have the necessary version of JRE installed, you should be good. Necessary application changes/configuration must be made in order for it to use JRE.
Srini

Monitoring Microsoft Windows 2008 Active Directory by a remoted Agent

Oracle documentation (E14542-01) said that for remote Agent monitoring with default settings, Grid Control can monitor only the Active Directory associated with the primary domain controller.
But for Microsoft Windows 2008 Active Directory primary domain doesn't exist anymore, can we use a remote Agent to monitor Microsoft Windows 2008 Active Directory ?
Thanks
Dominik

Dominik wrote:
Oracle documentation (E14542-01) said that for remote Agent monitoring with default settings, Grid Control can monitor only the Active Directory associated with the primary domain controller.
But for Microsoft Windows 2008 Active Directory primary domain doesn't exist anymore, can we use a remote Agent to monitor Microsoft Windows 2008 Active Directory ?I think , you can monitor it . Please check :
Oracle Enterprise Manager Grid Control Certification Checker [ID 412431.1]
How to Install the Microsoft Active Directory Plugin for Grid Control R2 [ID 359621.1]
Regards
Rajesh

POA performance issues under windows 2008 R2

Hello - we are running GW 8.02 hp3 and recently moved our main post office (~600 users) from Netware to Windows 2008 R2 (running under Vsphere 4.1).
We have started seeing intermittent slow performance issues esp. when moving a message from one folder to another, or sending a broadcast email.
It doesn't appear to be a hardware resource issue: disk queues don't exceed 1, with low latency (7-15ms) and we're not cpu or memory bound (that I can see).
Here are our current config settings:
Message Worker Threads: 15
Maximum GWCheck Worker Threads: 8
C/S Handler Threads: 30
Max Physical: 2048
Max App Connections: 4084
Soap Threads: 20
We don't see any serious errors in the logs when performance becomes slow. Could this just be a tuning issue?

In article <[email protected]>, Javerkio wrote:
> we are running GW 8.02 hp3 and recently moved our main post
> office (~600 users) from Netware to Windows 2008 R2 (running under
> Vsphere 4.1).
>
Windows is the lowest performing host for GroupWise, so that is a part
of what you are hitting.
How are you monitoring memory usage? I've found that the vCenter tools
aren't a good indicator of that, where as the Windows tools are better
in that respect. The biggy is that you don't want much paging to disk.
How much do you have assigned to this VM?, how many cores? And are
these ESX box(es) over committed on those two?
Those settings on their own don't really mean a whole lot. What we need
to see is what is actually being used, and if you are running out of
them, then upping those specific numbers can help. The best way is to
watch the POA web interface for the relevant settings.
http://hostnameorIP:7181/
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Oracle RAC Cluster Health Monitor on Windows 2008 R2 64Bit

Hello colleaques,
i run a 2-node RAC Cluster 11.2.0.2 64Bit on Windows 2008 R2 64bit. I did installl the Berkeley DB Version 4.6.21 succesfully.
After that i installed the crfpack.zip (CHM) as described in the README.txt.
F:\Software\ClusterHealthcheck\install>perl crfinst.pl -i eirac201,eirac202 -b F:\BerkeleyDB -m eirac201
Performing checks on nodes: "eirac201 eirac202" ...
Assigning eirac202 as replica
Installing on nodes "eirac202 eirac201" ...
Generating cluster wide configuration file for eirac202...
Generating cluster wide configuration file for eirac201...
Configuration complete on nodes "eirac202 eirac201" ...
Please run "perl C:\"program files"\oracrf\install\crfinst.pl -f, optionally specifying BDB location with -b <bdb location> as Admin
user on each node to complete the install process.
F:\Software\ClusterHealthcheck\install>c:
C:\Users\etmtst>cd \
C:\>cd "Program Files"
C:\Program Files>cd oracrf
C:\Program Files\oracrf>cd install (on both nodes as described in the README.txt)
C:\Program Files\oracrf\install>perl crfinst.pl -f -b F:\BerkeleyDB
01/30/12 16:42:21 OracleOsToolSysmService service installed
Installation completed successfully at C:\"program files"\oracrf...
C:\Program Files\oracrf\install>runcrf
01/30/12 16:44:03 StartService(OracleOsToolSysmService) failed:(1053) The service did not respond to the start or control request i
n a timely fashion.
01/30/12 16:44:03 OracleOsToolSysmService service started
It says here OracleOsToolSysmService was started, but it was not !!!
Manual starting gives the same error. !!!!
Please has anybody had the same problem ??
regards and greetings, Abraham

There will be a new version of the Standalone CHM/OS for Windows that will work with 11.2.0.2 and earlier versions available on OTN in the near future. The older version that you are using has not been tested and due to the infrastructure changes in 11.2 it is not expected it will work. The integrated CHM/OS that is included as part of the 11.2.0.3 GI installation does work as does the new GUI (CHMOSG) now available for download.

IDRAC6 racadm not working on Windows 2008 R2 x64 Server

We have Dell PowerEdge M910 on a M1000e Blade Chasis
iDRAC is Accessible via its Web Site and racadm -r works on different Server
But on the Actual Machine its giving me the Error of:
ERROR: RACADM is unable to process the requested subcommand because there is no
local RAC configuration to communicate with.
Local RACADM subcommand execution requires the following:
1. A Remote Access Controller (RAC) must be present on the managed server
2. Appropriate managed node software must be installed and running on the
server
Is there anyway to resolve this like Re-installation of Certain Software? or Anything that would make the racadm work when running on the server itself
Search Google and this Forums and this problem seem to be unique.
Lifecycle Controller Firmware is 1.6.5.12
Firmware Version is 3.60 (Build 3)
Operating System is Microsoft Windows Server 2008 R2, Enterprise x64 Edition
Any help would be greatly appreciated

Many Thanks for your Reply
Since iDRAC is accessible via it IP Address I have done the following but NOT successfull.
racadm -r <IPAddress> -i racreset soft/hard (with and without -f flag)
Also Reset using the Blade Chasis iDRAC and Server's iDRAC
I dont think there is something wrong with the iDRAC, as this is accessible using the iDRAC Web GUI and command line interface with the "-r" flag.
The issue is running the racadm (without and -r) on the server itself and getting the error mentioned above
Is there a way to check the any Logs file and or is there any Windows Server Service's Component that is needed by racadm command in order for it to function when running locally?
BTW
OMSA is at 7.4.0.2
Lifecycle Controller Firmware is 1.6.5.12
Firmware Version is 3.60 (Build 3)
Thanks and Best Regard

After OS upgrade to windows 2008 R2 x64 Dispatcher stopped by error

Hello everyone,
I am facing a problem after OS upgrade (from Windows Server 2003 Standard R2 x64 to Windows Server 2008 Standard R2 x64), Solution Manager 7.0 EhP1 on DB2 v9.7 FP4.
When I start SAP using mmc console after awhile Dispatcher stops.
When I wrote R3trans -dx in CMD:
D:\usr\sap\ASM\DVEBMGS00\exe>r3trans -dx
This is r3trans version 6.14 (release 701 - 19.01.11 - 11:44:00).
unicode enabled version
r3trans finished (0000).
The contents of [dev_w0|http://pokazywarka.pl/p9udr9/], [std_dispatcher.out|http://pokazywarka.pl/wgpsfx/] and[ std_server0.out|http://pokazywarka.pl/a5xsp0/]
I found an error in dev_w0:
[IBM][CLI Driver] SQL1531N The database alias "ASM" could not be found in the db2ds
C &+ driver.cfg configuration
And the Note: 1564507 - DB6: SQL1531N alias "<DBNAME>" not found in db2dsdriver.cfg
Contents of db2cl.ini:
; Comment lines start with a semi-colon.
[ASM]
Database=ASM
Protocol=tcpip
Hostname=sapsolman
Servicename=5912
[COMMON]
Diagpath=
sapsolman\sapmnt\ASM\SYS\global\db6\db2dump
Someone have any ideas how to fix Dispatcher ? I can attach any log files, if necessary.
Best regards,
Kamil

Hi,
Well unfortunately, do not think its possible to fix it. We once had a similar situation with SAP system on MSSQL on Windows Server 2008. It was only an ABAP system so after a lot of hit and trial we got the system up. And would not get any support from SAP incase of future errors.
But for Solution manager this really would be complex because of the Java part. Do you have the backup before OS upgrade?
Would recommend a restore and migration as supported by SAP.
Regards,
Srikishan

Bulk-create printer objects on windows 2008 R2 x64 print servers using Windows PowerShell

Hi,
I have an issue on a 2008 Server R2 x64 when trying to create a printer with this Powershell script:
function CreatePrinter {
$server = $args[0]
$print = ([WMICLASS]"\\$server\ROOT\cimv2:Win32_Printer").createInstance()
$print.drivername = $args[1]
$print.PortName = $args[2]
$print.Shared = $true
$print.Sharename = $args[3]
$print.Location = $args[4]
$print.Comment = $args[5]
$print.DeviceID = $args[6]
$print.Put()
function CreatePrinterPort {
$server = $args[0]
$port = ([WMICLASS]"\\$server\ROOT\cimv2:Win32_TCPIPPrinterPort").createInstance()
$port.Name= $args[1]
$port.SNMPEnabled=$false
$port.Protocol=1
$port.HostAddress= $args[2]
$port.Put()
$printers = Import-Csv c:\printers.csv
foreach ($printer in $printers) {
CreatePrinterPort $printer.Printserver $printer.Portname $printer.IPAddress
CreatePrinter $printer.Printserver $printer.Driver $printer.Portname $printer.Sharename $printer.Location $printer.Comment $printer.Printername
The printer port creation work fine, but I have this error on the printer creator:
Exception calling “Put” with “0″ argument(s): “Generic failure ”
At C:\temp\createprinter.ps1:53 char:12
+ $print.Put <<<< ()
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Note: I first install the drivers manually.
Then i have tried with several win32 drivers and the issue is always the same.
I have tried on windows 2003 and it works like a charm…
Any idea ?
Help would be appreciated

I just ran through these commands on 2008 R2 Enterprise with no issues. I would try adding the printer with commands outside of the function to narrow it down to a problem with how the arguments are being passed, or if it's something with the driver being
specified.
PS C:\> $port = [wmiclass]"Win32_TcpIpPrinterPort"
PS C:\> $newPort = $port.CreateInstance()
PS C:\> $newPort.name = "IP_192.168.1.21"
PS C:\> $newPort.Protocol = 1
PS C:\> $newPort.HostAddress = "192.168.1.21"
PS C:\> $newPort.PortNumber = "9100"
PS C:\> $newPort.Put()
Path : \\.\root\cimv2:Win32_TCPIPPrinterPort.Name="IP_192.168.1.21"
RelativePath : Win32_TCPIPPrinterPort.Name="IP_192.168.1.21"
Server : .
NamespacePath : root\cimv2
ClassName : Win32_TCPIPPrinterPort
IsClass : False
IsInstance : True
IsSingleton : False
PS C:\> $wmiPrinter = [wmiclass]"Win32_Printer"
PS C:\> $newPrinter = $wmiPrinter.CreateInstance()
PS C:\> $newPrinter.DriverName = "HP LaserJet 4100 Series PCL6"
PS C:\> $newPrinter.PortName = "IP_192.168.1.21"
PS C:\> $newPrinter.DeviceID = "TestPrinter"
PS C:\> $newPrinter.Put()
Path : \\.\root\cimv2:Win32_Printer.DeviceID="TestPrinter"
RelativePath : Win32_Printer.DeviceID="TestPrinter"
Server : .
NamespacePath : root\cimv2
ClassName : Win32_Printer
IsClass : False
IsInstance : True
IsSingleton : False
PS C:\>

Hp1022n printer doesn't working on windows 2008 R2 x64 via RDP from windows 7

Dear Sir,
i have a network of some windows7 and some server 2008 r2 Terminal Services, There is
a hp 1022n printer . when i print locally from windows7 , the
print comes very smoothly but no printing from windows Server 2008 R2 via RDP. i had installed driver for hp
1022n + (windows 7 x64) on server 2008 r2 but it still doesnt print.
note there are other printer installed (via TCP/IP ,hp jetdirect printing) and they working finely on
server 2008r2.
so give me a stable solution for printing on hp 1022n + printer via RDP server from windows 7

Hi Mahya,
Thank you for posting in Windows Server Forum.
Did you receive any particular error for your issue?
Please check the link provided by Hari, you can use RD Easy Print driver for server 2008 R2.In addition, if possible try using Universal print driver for your case.
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2008 R2 Performance Monitor information / thresholds

Dear Users,
I have been in search for information about the Performance Monitor for Windows Server 2008 R2.
Unfortunately not with exactly what I wanted to, so I have some information but still not complete.
What I'm trying to find is a sort of table with information which counters are good to monitor to make sure the server has enough hardware available.
We are working in a virtual environment so that makes it easy to give more hardware, but this also means that there is a possibility we are handing out to much and that we need to take some hardware back.
But I find it hard to find the right information about the counters to use and with the thresholds.
I got already a lists with counters, explanation and the thresholds, but there are way more counters.
Is there anyone who could point me out to a website were I can read more information about this subject?
Because I really want to spend more time about what is using resources and if we are working efficiency.
Any other information regarding the Performance Monitor is as well welcome.
Kind regards,
Martijn

Hiya,
I use the following table as a rule of thumb.
Objects & Counters
Issue thresholds
Processor - % Processor Time
Above
75-85%
Disk - Avg. Disk Queue Length
Slowly rising until poor performance is experienced.
Disk - % Idle Time
Larger than 90%
Disk - % Free Space
Less than 20%
Memory - Available Mbytes
Less than 2GB on Web server.
Memory - Cache Faults/sec
Larger than 1
Memory - Pages/sec
Larger than 10
Page File - % Used and % Used Peak
Trend analysis on occurrence. The more often, the worse.
Network - Total Bytes/sec
Larger than 40-50% of network capacity.
Process - Working Set
Larger than 80% of total memory
From my own guide:
https://jesperarnecke.wordpress.com/2014/05/19/sharepoint-infrastructure-design-specification/

10g Express Edition on Windows 2008 Enterprise R2 x64 with Active Directory

I have successfully installed the 10g Express Edition on Windows 2008 Ent. r2 x64 with Microsoft Active Directory Domain Controller but i could not be able to run http://127.0.0.1:8080/apex
Although i have run the http://127.0.0.1:8080/apex on my another Windows 2008 R2 x64 ant WITHOUT Active Directory Domain Controller Role.
i think its related with AD Domain server role of my server, because i run that on same config and operation without Active Directory Domain Controller role.
Can anyone help about this issue?
thanks in advance

I have experienced the same problem - running 10g Express on a Win 2008 (32-bit). When not being a Domain controller, the install was fine. When installing after the server had been given the Domain Controller role (+the required DNS), it failed. NO FIREWALLS are involved on the server. Seems like Oracle Express has problems being installed in this kind of environment - independent of x32 or x64 bit OS.
Edited by: 811504 on Nov 17, 2010 11:44 PM

OCS 2007 compatibility with Windows Server 2008 R2 x64

Hi, we have OCS 2007 installed on our Windows 2003 R2 Standard X64 Production Server and are moving to Windows 2008 R2 X64.
I've been looking at a few support articles out there (e.g. http://support2.microsoft.com/kb/982021) and noticed that they're saying it (is) compatible.
I would appreciate a definite answer from you experts out there on this so I'll know definitely if we can proceed with our upgrade or not.

To be clear, if this is OCS 2007 R2, then yes it will run fine on Server 2008 R2. If it's OCS 2007 (not R2), that would not be supported.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Windows 2008 Failover Cluster - Cannot add a generic service

Trying to add a generic service in a failover cluster.
Select the option Services and Application and it opens the wizard and then displays the error "An error was encountered while loading the list of services. QueryServiceConfig failed. The system cannot find the file specified"
The cluster validation wizard completes successfully. Permissions do not appear to be an issue as this account can seemly do everything else so I am at a loss to understand why this API is failing when it tries to query the server for services information.
Having searched the Internet the only thing I have found was someone posting a similar issue in the Greek language Technet forum(if I recall correctly) and their comment was they rebuild their cluster.
Windows 2008 (SP2) x64 two node cluster running a non-Microsoft database. We need to add a non-Microsoft Enterpirse backup solution and this is their documented method (adding it as a generic service) - both bits of software are from big vendors.
Symantec AV, but have tried with that disabled so don't think it has anything to do with that. Something is stopping the API from reporting back but I can't find what.
Really appreciate some help before we have to log a chargable call with Microsoft support
Thank you

Hi,
Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is
very useful for the further research. Please feel free to let me know if you have addition questions.
Best regards,
Vincent Hu

Performance monitor CF9 Windows 2008 R2 x64

Similar Messages

Maybe you are looking for