Period Change in MM
Dear Gurus,
I am trying to change the period indicator mater master data, as we want the period to be open for the whole year. which is June-July but the system is not letting me select the Fiscal year variant. The message says "Fiscal year variant reset since unnecessary with this period indicator"
Please let me know what changes i have to make to do the needful.
Thank you,
Best Regards,
Farooq Rifai
Hi
In the MRP3 view of material master creation , please selec the Period Indicator as P - Period according to fiscal year variant & then maintain the Fiscal year variant.
Thanks & Regards
Kishore
Similar Messages
-
Depreciation Recalculation after control period change in a depr. key
Hi gurus,
I've a problem with dep recalculation:
for a specific dep.key (with Multilev.method= 20%, constant) the control period is 06/06/06/06 so the starting dep date is at the begin of the year. For example if I post (in 2009) 100 for an asset the depreciation is 20 for every year.
Now I need to have a half depreciation in the first year of useful life (even if in 2009, yet open) so I've changed the control period in 07/06/06/06.
My problem is that for assets posted before this change in the key, the planned depreciation is not changed in 10 but is 20 again, even if I run AFAR.
How can I do to change the planned depreciation for asset posted before the control period change?
TNX in advance
PrincipeyHi Sachin,
Tnx for your response.
unfortunely also this method doesn't work.
Now I'm tryng to reach my goal (set half depreciation in the acquisition year -also for assets already posted-) with a new way:
I've set again the period control at 06/06/06/06 changing now the multilevel method defining two levels:
Year: 0 > Percentage: 20%> Reduction: 50%
Year: 999 > Percentage: 20%> Reduction:0
In this way AFAR appears working but I'm testing to find problems side.
Any suggestions?
TNX
Edited by: Principey on Feb 9, 2010 11:01 AM
Edited by: Principey on Feb 9, 2010 11:02 AM -
Period Change for a single month
Hi All
We are currently on a year dependant fiscal year - 4,4,5 FY variant..
However, for the month of september - the period 9 closes on the 26th but they want to extend ONLY that period till the 30th of September..
Since we are still in July - would that change be ok to perform or not? Would it cause any issues in our system..?
Thank you
RukshanaIt will not have any negative impact technically to change the future period in a fiscal year dependent variant.
Regards,
Gaurav -
ERROR while MM17 for frecast period change
Hi,
While MM17 i am geting error mesage , we have 220 items for which i want to change the Forecsat period when i excecute MM17 for 115 items i am getting error message as below
Messages have been issued: number MASS000167000001
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data.
System Response
The system has filed these messages in the form of an application log with the number MASS000167000001.
Procedure
View the application log.
Proceed
i am not able to understand it what error i s this and how to solve it, for 105 items it works properly.
regards,
zafarDo what you are told to do:
View the application log.
you can either click the Hyperlink PROCEED in the message detail
or
select a message in red in the message overview and click the button Detail.
SAP jumps to the detailed messages and you can obtain the message that caused the update error. -
OB52-posting period changes history
Hello ,
Can any body tell me table in which we can get history of changes made in ob52 that is posting period.I wan to check changes made if any on one particular date.
Regards
AtharvaHi,
All the system log are maintained in table *BDTABLOGGO TO THE TABLE and then search for your ob52 table T001B their you will find the data. And any changes to header data is maintained in table CDHDR & CDPOS
Hope this will help you
regards -
How to change fund managment period from existing (APRIL TO MARCH) TO OCT TO SEPTEMBER.
WE ARE TRYING TO CHANGE THAT USING
public cector mgmt
fund mgmnt govt
basic setting
fiscal year setting
define fiscal year setting
there we have v3 as april to march and
v9 as oct to sept
originally we had assigned v3 to Financial year and to fund mgmt period both.
but now we want to assign v9 to fund mgmt period.
But system is not allowing us to do that. How can we achive it and what are the reasons for errors.Hi,
If you already post to FM then you can't change the FY variant. The only way I see is:
A) Delete all posting.
B) Change the setting
C) Reload by "subsequent" transactions.
In case you direct post to FM (E.G budget) you have to reenter. Alternativerly, if you have mass data you entered, write a small program that download the line items and reload after the changes (you can use CATT or ECATT to load the flat file you create).
Hope this help you.
Benni -
Cost Center validity period change & Business area assignment to cost cente
We are facing with error KS134 - Transaction data already exists for the period.
We tried to create new cost center with period split. But I am getting error KS133 - Deletion is not possible (dependent records exist in table ).
Hence even creation of the new cost center is not possible. We alrady have Validity Period from 1.04.2005 to 31.12.9999.
Is there any alternative solution ?
SumeetHi Sumeet,
The fields in Cost Center Master Data are "Time-Dependent" and you can see the Time-Dependency of each field in OKEG transaction code where you can find "Business Area" to be "Fiscal-Year" based.
So, if at all you need to change the Business Area, it would be possible in next financial year only...
And also, because, your Cost Center is defined from 01.04.2005 to 31.12.999, there is no way that you can change the validity period so as to create / extend in the same period-lap.
I hope you got it...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Apr 8, 2009 3:11 PM -
Org Unit Validity Period change
Hi Experts,
Can any you please let me know, is there any option of changing the Org Unit Validity period.
Ex: By mistake I have created an Org unit with Start Date as 01.01.0091 and End Date 31.12.9999.
Now I would want to change the Validity period of Start Date from 01.01.0091 to 01.01.1900.
This would be really helpful for me.
Thank You,
KishoreJHi
you can do this by date preview icon or delimit options.
Regards
Suresh -
Retaining history on validity period changes for qualifications
We'd like to be able to retain the history on when validity periods for qualifications are changed in the TEM module. I can't get the Qualification Catalog maintenance screens to allow us to enter the validity dates for the HRP1025 recors. I was able to configure SAP to allow me to make the changes via PP01 but if we then make a subsequent update in OOQA the effective date goes back to the start date of the Qualification Object and the history is lost. Is there any way to turn off the maintenance of the HRP1025 data from OOQA and force it to be done through PP01?
no response
-
Period changed,how to re-calculate plan depreciation
Dear All,
I changed financial period interval,e.g the period interval is 26th of previous peiod - 30th of current period,i changed to 1th of current priod - 25th of current period,how to re-recalculate plan depreciation,thanks
the FY is still year dependentHi,
Please try AFAR transaction to re calculate planned depreciation for all of your assets in your company code.
Thanks,
Srinu -
VK11 Validity period - Change Pointer
Hi,
I have a pricecondition ZPMO that has a Validity period.
A change pointer is created when I create or change the pricecond but when the Validity period is over, nothing happends.
Any pointers to how I can get a ChangePointer when a Validity period is over ?
Br,
MartinHi
Go to change mode of condition record and here you can extend the validity periods even though the validity period date is in the past. What i mean to say is that even the validity period for the condition record is over, you can change the valaidity period because it will be in enable mode.
if needed any inputs pls feel free
Thanks
Guru Prasad -
Future price is not getting updated as current price when period changed
Hi all,
We follow the following procedure to update standard price in material master. Our organization is a manufacturer of pharma products. ( System is not live yet)
We have BoM's for all FG's and all FG's & SFG's are having Price control indicator as "S". Rest other materials are valuated for Moving Average price.
> Run T-code CK11n for the FG.
> Check whether costs of utilities and final product is as per the cost sheets prepared manually (10-20% difference acceptable)
> Do not save it and goto CK40n tcode. Mark and release price of FG's & SFG's for the current date (eg: 16.01.2008). Now as 10th period of year 2008 was not open at that time and only 9 th period of year 2007 was open, the prices were updated as "FUTURE PRICE" in costing-2 view of material master.
> Now that when i am opening 10th period (both financial period and inventory period), my future price is not getting updated as my CURRENT PRICE in material master as my standard price.
Pls. reply to this urgently.Hi,
I am sure about it that when CK40n was done for a future date when some n-1 period was open, the costs released would get updated as future price.
When the period for which future price was updated is opened as current period, the future price automatically gets updated as current price and is also set as standard price in accounting 1 view.
But i m unable to identify why is not working. -
Period change is not appearing in accounting view of material master
Hello SAP lovers
As we know once we close the period with MMPV, Latest perion appeared in material master --> Accounting view.
Now period open is March 2007 for a company code. It is expected that material created in all the plants assigned to same company code should display latest period in accounting view. This is happening for all thousands of material in system but i found 1 material which is displaying the period as Nov 2006.
I have doubled check that this material is created for the same plant which is assgned to the company code for which Mar2007 is open....
Anybody ......Any clue......
Best Regards
AvinashHello Mani
I have already checked all the open items.....
No sale order. No entry in table MSEG.
Only one PO without GR.....So that should not make any difference.
Br
Avinash -
Hello Gurus-
We are on ECC 6.0 and our fiscal year does not start in January, but March.
Is there a way to add Month to the standard ECC Reports and if so, how is this done? I suspect this requires ABAP support?
Thanks!Hi,
yes its OB29, mark the FY variant you need and tick "period texts" in the dialog structure at the left side. Maintain the texts in the subdialog like this (a FY variant that starts with April = period 01:
EN 1 APR April
EN 2 MAY May
EN 3 JUN June
EN 4 JUL Jule
EN 5 AUG August
EN 6 SEP September
EN 7 OCT October
EN 8 NOV November
The entries can be seen in table T009C.
Best regards, Christian -
HIRE Employee prev to the retro accounting period in payroll record
Hi All,
I have an issue when I try to hire an employee in the system. The system doesn't allow me to hire any employee before Nov 2009 as the retro accounting period for that payroll area is dated to 11 2009.
The retro accounting period changed from 10 2005 to 11 2009, when it did not change for any other payroll area.
Can anyone suggest a solution as how to hire an employee beyond this date?in one case we can perform this activity why the user will forget to hire an employee who got hired for the previous months
U have to change the Retro date in the control record as per the isssue
ask the client to use the system accurately other wise deleting the control record is not good practice in some cases we can do and we have to do
but this above said shd not be the reason
Maybe you are looking for
-
Getting Open MQ and Mule 2.0 work together
Hi! I would like to ask some help on getting Open MQ work with Mule 2.0. I'm quite new to both technologies, and I can't get them to work together. Here is how I've tried so far: What I'm trying to achieve first, is that there are 2 queues in my open
-
How to create an object alive all the time on a server side
Hi, I work on an Intranet with J2EE technologies. I need an object to do several tasks in background on the server side. Like start scheduled processes on a database and files, stocked on the server. What is the way to do this. I thought to use the J
-
Recommendations for dual layer media-
hi, I have a new mini with the pioneer dvr-K06 superdrive. Can anyone suggest DL media that have worked for them? Both for iDVD projects and with Toast (I have iDVD 7.0.2 and Toast 8.0). (I've used imation single layer media with both toast and idvd
-
Documents staying in the GenWWW status - Thumbnails - IBR
Hello everybody, I would like to convert image to thumbnail by IBR server. I configured IBR provider and File format: Format: image/jpeg COnversion: ImageThumbnail And now. If I check-in the document to the content server, the document staying in sta
-
How to add in ODBC connection and configuration for data connection
Hello expert, on my computor, there is a oracle client for oracle 10g. now there is new oracle 11g installed , I want to create a ODBC connection to this new database. but when I create ODBC , I can't find server type for oracle 11g , there only has