Permissions Required in BW to use VC?

Can anyone tell me what permissions a BW user will need in order to be able to view VC iviews that include BW reports?
I have created a model that uses a BW query as the data source for a chart/table. When I run it in the context of my BW super user, there are no problems.
When I run it in the context of a standard user, I get an Application Error:
"String index out of range: -1"
I am pretty sure that this is because of the permissions in BW (as a result of experimentation). Can anyone tell me what specific permissions I should allocate?
Thanks in advacnce
Regards
Richard

Thanks for your reply Prakash.
I have managed to get this fixed by working with our basis guys - was a problem with the users not having permissions to run RFCs
Regards
Richard

Similar Messages

You don't have Add and Customize Pages permissions required to perform this action - but i do!

Hello.
I am having a similar problem to the one described by this post here:
http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
However, his resolution of changing web.config under wwwroot did not fix my issue.
Here is the situation on a recently upgraded SP2010.
1) Create a document library. Set the document template to "basic page"
2) give a user full control on the document library.
3) Go, under that users credentials, to the document library and create a new document.
4) Name the document whatever and hit create
5) a page is displayed which says the following: "Web Part Error:
A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
entire site :)
Giving the user "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
Things i have tried:
- Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
- set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
- Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
- Recreated test lists and was able to duplicate the behaviour
So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
Setting global site permissions is not an option.
Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
working.
This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
Any help appreciated thanks!

Hi,
Yes, you must have “Add and Customize Pages” permission
from site level to perform this action, the permission is not in list permission level.
You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
level.
Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
from site level.(site permissions)
Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
(you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
If you need further help, please let me know.
Hope this helps
Thanks!
Stanfford
Everything will be fine.

The iPod "my ipod name" cannot be updated. The required file is in use.

Installed iTunes 7 on my mac. Everything went fine. Updated my ipod everything went fine. Ever since then I've been getting a dialogue pop up window stating "The iPod "my ipod name" cannot be updated. The required file is in use."
This pop up happens at completely random intervals, sometimes every minute sometimes every 10 min.
Its extremely annoying as it bounces the icon in the dock until I give iTunes focus, click ok, and then I can navigate songs etc. I listen to my music thru my iPod while its connected to my computer, so this bug just about has me reverting back to v6.
I've repaired permissions, and disabled anything I could think of that may be using it, ie synergy etc, with no success.

I have a 4th Gen 30gb IPOD and updated Itunes 7 sucessfully but could not update/install IPOD 1.2 upgrade.
Eventually after clicking the message boxes with the above info we seem to be getting, I selected the update button that appears on the front page of ITUNES and it installed/updated. I have been attempting for a couple of days and it just worked!!!!
After it completed, I received the same dialog box and then disconnected the IPOD from my laptop.
Seems to be OK now but there is def something going on.
I thought it may be a shareware issue with mp3's being downloaded into Itunes library form another application.

"ipod cannot be updated becuase the required file is in use"

I upgraded to itunes 7 this weekend and so did my husband. I am running the latest versions of all mac software with my fifth gen ipod and he is running the same with the ipod mini. We both get teh same error message:
"ipod cannot be updated becuase the required file is in use"
I have tried the following with and without guidance from tech support:
Reboot
repair permissions
"restore" on the ipod using itunes 7
reinstalling itunes 7
trying to reinstall itunes 6 instead
removing login in items from automatically starting
disabling firewall/antivirus
I stumped tech support yesterday. Anyone else having a similar problem?

I'm another one who is having this problem. Though it doesnt seem to effect the downloads or the files, it pops up every so often. Cant figure out what file its referring to or what cant be updated. Def has to do with the latest version of iTunes.

Don't have appropriate permissions required to uninstall extension? (GuideGuide)

I'm receiving this message:
"you do not have the appropriate permissions required to perform this operation adobe site:forums.adobe.com"
When I try to uninstall the GuideGuide extension from extension manager.
The extension stopped working after they recently released a new update, so I went to update it, only to be told that I need to remove the old one in order to install the new one. Ok, fine. Then I go to remove it, and I get the above error! I definitely do have the permissions! I'm the administrator! Why doesn't the extension manager know that?
So, what do I need to do? Is there a way to manually remove the extension? I'm currently re-installing the extension manager in hopes that that works.
For others with a similar problem, they've been running windows and just need to 'run as admin', but for me, being on a mac... It seems it's an uncommon problem.
Thanks Adobe Community!
I'm running CS5 (or 5.1?)
-Julian

One thing you have to know: That you are administrator doesn't means that all applications you are running have administrative privilege automatically, no matter Windows or Mac. You have to explicitly tell OS (Windows or Mac) you want to run applications as admin. on Mac, sudo command should be used.
1. Run "/Applications/Utilities/Terminal.app".
2. Input the following commnad then press "return" key.
sudo "/Applications/Adobe Extension Manager CS5/Adobe Extension Manager CS5.app/Contents/MacOS/Adobe Extension Manager CS5"
3. Input your admin password then press "return"key.
BTW, privilege escalation feature was introduced in CS5.5. So in CS5.5 and later, you don't have to run EM this way.

Extension Manage - Appropriate Permissions Required

I installed the trial version of the Master Collection, uninstalled it, then purchased a subscription to Adobe Cloud Service. All my Dreamweaver extensions I bought and previously installed are still there, but when I try to remove or update them I get the following message:
You do not have the appropriate permissions required to perform this operation. Contact your system administrator to obtain permission. The extension will not be removed.
Well, I am the administrator and only have one account on my machine (Windows 7 x64). I have even gone directly to the EXE file in the folder, right-clicked and chose "run as administrator" and still get the same error. I have gone to properties on the app and changed it to run-as administrator for everyone and still the same error.
I have no idea what to do. Any other ideas are VERY welcome.
Thanks,
Ben
Message was edited by: haveben

Hi Ben,
Sorry to hear of your difficulties. It is possible to convert trials to be included as part of your Creative Cloud Membership (not that it matters now).
Are you on a domain using an account governed by group policies or is this just a stand alone machine?
Which version of Windows 7 x64 are you using? Enterprise, Pro, Home, etc.
Permissions issues on the Windows can be difficult to fix.
Have you tried turning off/lowering UAC settings?
You might try reinstalling Dreamweaver CS6 in the Hidden Admin account for Windows. (unofficial recommendation, try at your own risk)
-Dave

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Photoshop won't start: Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file.

Adobe Photoshop CS6 Extended
"Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file."
I've tried finding and checking and fixing permissions but no success.
This happened from one day to the next. I think it has to do with the sn attached to the disk rather then the motherboard. I have the suite co-installed with Symphony 5.05. I've tried reinstalling.
What's to b done? The rest of the Creative Suite 6 (AE, AI etc.) works fine.
Anyone...?
Loui

Have you tried restoring the Preferences yet?

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Firefox 7 is forcing me to fill out a form field that isn't required. I've used FF on this site for years but when I upgraded to FF7 it no longer works. IE it works fine.

Firefox 7 is forcing me to fill out a form field that isn't required. I've used FF on this site for years but when I upgraded to FF7 it no longer works. IE it works fine.

It's our internal applicant tracking systems (resume database). It works fine in IE and all previous verisons of FF but in FF 7 a bubble icon pops up stating that "Please fill out this field".
The field is not required but states "Require all of these words" if you to run a search based on those parameters.

IPod "cannot be updated. The required file is in use."

Since updating to iTunes 7 the program keeps saying that "The iPod "iPod name" cannot be updated. The required file is in use." When I click on “OK” it does in fact update. I tried to restore the iPod but couldn’t do it from within iTunes but I could exit iTunes and run the most recent update/restore on it from the desktop.
Also, I can not eject the Nano from within iTunes “iPod cannot be ejected because it contains files that are in use by another application.” But I can exit iTunes and eject it from the desktop. I don’t have this problem with an older 40 gig iPod.
I called Apple and they promised to send a work around but it never came.
Running on a G4 with 10.4.7
Any suggestions?
Dual Processor G4 & G5 Mac OS X (10.4.7) I do have three users using the same iTunes library.

I just started getting this message today - the only new thing I have done differently since I last synced is to start rating my songs on the iPod.
Just a hunch but did everyone else start getting this error after their first try at rating songs on the iPod?
Other than that does anyone know how to report this kind of thing to Apple? as they need to fix it soon.
The only answer I have seen after 2 hours of searching is to go back to iTunes v6.05 - see Chad Armstrong's tip here: http://discussions.apple.com/thread.jspa?messageID=3116292&#3116292 - but I can't be bothered to go through all that just yet.

IPod cannot be updated. Required file is in use.

After I upgraded to iTunes 7, whenever I plug my iPod into the computer to sync, I get this error message, "iPod cannot be updated. The required file is in use."
What is this ,a nd how do i correct it? Any clues?
Thanks!

After upgrading to iTunes 7, I too, am getting the error message: "ipod cannot be updated. The required file is in use."
I get this message when I plug my ipod into my Mac (don't use a PC) to sync updated podcasts. Strangely, the updated podcasts DO appear on my ipod, but most of the time, when I try to play them on my ipod, the ipod shuts down.
This is the second time I've had a major problem with my ipod after downloading iTunes upgrades. Very frustrating. And annoying.
Has anyone discovered a fix for this problem?
powerbook G4 Mac OS X (10.3.9)

Can't update iPod, "required file is in use."

Whenever I connect my iPod to either my work computer (a PowerMac G4) or my laptop (a PowerBook G4) I get an alert message in iTunes that reads, 'The iPod "Thomas's iPod Mini" could not be updated. The required file is in use.' This message sometimes pops up every few minutes and is VERY annoying. FYI, I have my iTunes Library on an external USB hard disk, but I don't think that has anything to do with it.
Does anyone know what is going on?
PowerBook G4 1Ghz Mac OS X (10.4.8) iPod Mini 4Gb

I think I solved it (my mac inf. below):
I opened preferences in Norton AntiVirus v.10.1.1(003) and went to Auto Protect "Safe Zones" added my iPod to the "Everywhere EXCEPT in:" field from the mounted volumes area and alls well so far even with auto protect enabled.
I don't even get the problem on ejecting the iPod from iTunes anymore ('can't eject because iPod is in use by another program').
hope this helps.
(anyone got a suggestion on how I can quiet down my mac's windtunnel like cooling fans?)
my mac inf.:
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 2
CPU Speed: 1.42 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.6.0f1
Powermac G4 (windtunnel) Mac OS X (10.4.8) my mac's fans are too loud!

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

Happy Holidays. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years

. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years old, but sometimes I have difficulty using it with the other days downloading a boarding pass, and e filing at the USDC. . There's a problem with Adobe Flash, media, etc. and other Adobe programs, (which I use for downloading boarding passes for airlines, etc.) so basically I have to delete these other Adobe programs, besides the Adobe Acrobat 7.0 Standard if I want to 7.0 Standard to work. I periodically download the updates, but there's still a problem. My question is: Can or should I purchase another program to update the present Adobe Acrobat 7.0 standard, or just buy a new program such as the Adobe 11? Am I mistakenly doing something wrong, such as when I download? I'm an old valued customer so I don't want to spend a lot of money since I am replacing my Dell XP for a new computer now, and my other computer is a Dell Vista.
I'd appreciate your valued advice.

If you are getting a new computer (for a PC it would have Win 7 or 8), then you will need to purchase XI if you wish to continue using Acrobat. Acrobat 7 is not compatible with these systems (and probably the same for MAC systems), though sometimes workarounds are possible, though not easy to use. I guess the answer is to buy the new version. Try http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html, click on the Buy for Acrobat, and then select the version you want.

Permissions Required in BW to use VC?

Similar Messages

Maybe you are looking for