Permit classification for WBS element (for PM order)

Hi!
I've set up an automatic permit based on classification and it is working already correctly (for the field CSEVPERMIT-ILART).
I would like to set up an another automatic permit, but for the WBS element (CSEVPERMIT-PSPEL). However this field is a numberic(8) field, so it allows only numbers (like 12345678), which is the ID of the WBS element in the database (which is the PRPS-PSPNR).
But I have to set up the automatical permit based on the "useful" ID of the WBS element (PRPS-POSID).
I have to set it up with the following mask: L++++++T* (if the WBS element matches the mask, then the permit have to appear in the order's permit list).
Is there a way to achive this?
Thank you
Tamá

Tamás,
I dont think you will be able to achieve this through standard config. As indicated , you cannot use POSID field since its not part of the structure CSEVPERMIT. You will definetly have to use the existing field PSPEL.
If you are in ECC 6.0, you could use the implicit enhancement functionality to enhance the existing flow to provide your own custom logic within FM PERMIT_PROPOSAL_BY_CLASS. You will also have to store the Mask to check in a different location , since PSPEL is a numeric field.
Also beaware that unless you are modifying your existing class to add the WBS element field also, you will not be able to assign two different permit classes to permits.
Regards
Narasimhan

Similar Messages

Relation between business area and WBS element in sales orders

Hi,
I need to find the business area for WBS element for line items in sales orders.
Which database table can I use for that.
Thanks,
Abhishek

Check these tables PRPS WBS (Work Breakdown Structure) Element Master Data
PRPSS Standard WBS Element (WBS element) - Master Data
Field PGSBR ( Business area for WBS element )
PSPNR (WBS Element)

WBS element for Sales Order Item level

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AM

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AM

Segment for WBS element in Inbound Sales Order Idoc

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit

Hello,
        As far as I know, there is no Segment / Field definition in ORDERS05 for WBS Element as it is not mandatory information to be filled in order for the Sales Order to be Complete. So, you need to create an Extension of the IDoc Type ORDERS05. For your requirement, here is the Approach I have.
1. Create an extension for IDoc Type ORDERS05 to ZORDER05 with a Custom Segment Z1EDP01 in which you'll have the Custom Field Name VBAP-PS_PSP_PNR which is the WBS Element field in VBAP Table.
2. Now, use the Customer Exit EXIT_SAPLVEDA_001 in the Enhancement VEDA0001 in which you can actually populate the Field WBS Element that would be already available in the Inbound IDoc to store it in a Work Area. As you are aware, you'll need to create a Project in CMOD for the same.
3. Export the same to some MEMORY ID 'XXX'.
4. Come back to the Selection Program for ORDER05 which is IDOC_INPUT_ORDERS in which you'll find the below CASE Statement.
    CASE xaprau.
          WHEN ' '.
            PERFORM call_va01_new_orders USING ok.
          WHEN 'Q'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Angebot
call transaction Order Entry VA01 with refer to quote number.
            PERFORM call_va01_new_orders_angbt USING ok.
          WHEN 'C'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Kontrakt
call transaction Order Entry VA01 with refer to contract number
            PERFORM call_va01_new_orders_contk USING ok.
          WHEN 'L'.
5. Now, since our Standard Order Type (VBAK-VBTYP) is 'C',
    we'll have to choose the Subroutine for the 'C' Option.
6. In this Subroutine, there is another Subroutine va01_dynpro_kopf_kaufmann_kde2 which is for populating Custom Dynpro Fields for the Sales Order. So, we need to choose the same Subroutine inside which we have to Create an Enhancement Implementation.
7. In this Enhancement Implementation (Implicit), we have to IMPORT the value of the WBS Element which was exported in the Customer Exit.
8. Check if it is initial. If it is not, then Call the Perform as below.
     IF NOT WA_Z1EDP01 IS INITIAL. "Checking if the Segment
                                                       " is Empty
   PERFORM DYNPRO_SETZEN USING 'COBL-PS_POSID' WA_Z1EDP01-ZZWBSELEMENT.
ENDIF.
9. Since the Sales Orders are posting using BDC here, by calling the above Subroutine DYNPRO_xxx, we are appending our Custom Segment / Field value to the BDC_DATA table.
10. In Step 8, I've given the Notation for Work Area. It will also be applicable when there are multiple Line Items. All you have to do is to EXPORT an Internal Table instead of Work Area and use the same here for each Line Item.
11. I've given you above procedure because I've worked on similar requirement in which I had to populate the Special Processing Indicator instead of WBS Element.
Hope it would be helpful for you.
Thanks and Regards,
Venkat Phani Prasad Konduri

Reg WBS Element in Sales Order Line Item For Sales Order BOM

Hi ,
Greetings!!!!
I have a requirement, in a Sales Order I am Exploding BOM. After that Projects will be Created.
Once Project will be created i need to Assign WBS element for All Items in Sales Order.
My requirement is When I assign WBS element for Header Material (Parent Item) system will auto assign WBS for Child Items.
for this what Configuration I have to do.
Please do need full.
Thanks,
Regards,
Prasad.

Hi Dayananda
Check in transaction VTFL for given item category what copying routine are set. Check those copy routine and see if there is any data is being copied from table VBAP
Similar to above also check transaction VTFA for copying routine (if any)
As a standard SAP even we create an invoice with reference to the delivery document, still there are some data which is being copied from a sales order i.e. all pricing relevant information is copied from your sales order and not from delivery.

Internal order creation for wbs element

hi
I want to settle internal order for wbs element ,but while creating internal order in KO01,required Order type type not appearing mean in my company wbs element required for order type PS01,Category -20(network),so for this 20 cat. where should i create internal order.please advise me
thanks
chandu

Hi,
you can't use the order type related to category is 20, because it will use full only PS. you can create the internal order with category 10 and maintain the settlement rule said that to be settled at WBS element.
Thanks and Regards
Nagaraju SSV

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

In-correct commitments for WBS elements

Hi
The Service order has got account assignement as either projects or aux accts assignment. Theis split into two accounts assignments with two WBS elements with a percentage distribution. (say 60and 40%) with the same G/L account. Now GR, IR and service entry sheet has been done for the both. I can see all the actual costs in CJI3 report. Now, the commitments have been reduced only for the first WBS element/accts assgnt. The value remains appearing in the report as open commitment for the second one although I have exhausted all the amount from PO. Can anybody explore the reasons for this behaviour.
Thanks in advance.
Basavaraj T.

Hi
Thanks for your feedback. I did run program RKANBU01. But it did not correct the commitment.
Giving you some more details:
The Total service order value: 107030.00
1st acct assignment: 0.6 (60%)
2nd acct assignment: 0.4 (40%)
Both assigned to to two different WBS elements in service order.
GR/IR/Service entry done: 57796.00 and 38530.00 This comes total of: 96326.00
Balance as per above statistics: 10704.00
But in CJI5 report, it is showing up: 42812.00
This is exactly 40% of the order value. It seems while reducing the commitments, it has taken into consideration of first account assignment only. The second one remain as it is.
Any hint is most welcome.
Regards,
Basav

WBS Elements for Project

Hi Guys,
I have requirement like, my selection input as PROJECT , i need to get all the WBS element for the particular Project. Do we have any function module or table to get the data?
Thanks,
Gourisankar.

Hello,
Try the FM BBP_PS_PROJECT_GET_LIST
Pass the project and in return you can get the WBS elements, Orders,Network activities
P.S. Project number has a conversion routine attached to it check it before passing to the FM.
Regards,
Sachin

BTE Failing for WBS Element

Hi,
I need to modify the document created using FB01 / MIRO for WBS Element. I could not find any user exit or BADI to do the same. So I tried the BTE 1120... I added a structure to BSEGSUBT to add the WBS Elements... And in the FM for 1120, I am passing the WBS Element to BSEGSUBT-PROJK.
But this data is not getting updated in the document. On further investigation, i discovered that the Internal Table T_ACCIT has the field PS_PSP_PNR and not PROJK and its because of these differences in the name of the fields, i am not able to add the data to ACCIT...
How do i get my data in the document?
Appreciate your help.
Kind Regards,
Tanuja

Helll T ,
i think in that case ,...make use of Substitutions in Controlling area , in FI area system wont allow to change field values which are not part of its substittion fields.
try GGB1(tcode)--->Cost Account ->line item->create Step -->and make use of Exit Module in order to change value of COBL-PS_PSPNR or something like that.
regards
Prabhu

FI posting not allowed for WBS Element

Hi All,
While doing down payment billing I'm getting error that FI posting is not allowed for WBS element. But FI periods are open for all months in 2008.
Please suggest how to resolve this issue.
Regards,
Harish

Hello
Account assignment
If you want to post actual costs and commitments to a WBS element, you have to indicate that the WBS element is an account assignment element in the WBS. All objects that can be assigned costs and commitments within a project (for example, orders, networks, or purchase orders) can only be assigned to a WBS element if you have set the account assignment indicator for the element.
In Customizing for the Project System, you can set an indicator to specify that costs are planned for all WBS elements or only for specific WBS elements.
Billing
If you want to post revenues to a WBS element, you have to indicate that the WBS element is a billing element in the WBS.
Reg
assign points if useful

WBS element for Liability Item

Dear Guru's
Is it Possible to assign WBS Element for Liability Items ie Salary Payable
Regards,
R.Ramakrishnaraj,

Hi,
A WBS element is working on the same way as an internal for the postings from costs.
The diffference is in the project system you set up a stucture with WBS element and you can say by WBS element if you can make a planning or post costs on it. (it is possible to make your planiing on level 2 and post your cost on a lower level)
In internal orders you make an order and have to put this in a structure for reporting. The planning and the actual costs are posted on the internal order.
Paul

Creation of settlement rules for WBS element

Hi,
Iam having problem when creating the settlement rules for WBS elements. The business goes like this.
We have XI interface which creates the Idocs and an inbound program(customized) to process the Idocs. When the Inbound program is run the WBS elements are created and settlement rules are created for the WBS elements. The inbound program is run automatically thru batch job.
First time when the Idocs are processed about 95% of the WBS elements have settlement rules created and for other 5% settlement rules are not created. The Idoc is in status 64. I tried reprocessing the Idoc and then the settlement rules are getting created succussfully. The problem is Iam not able to find why the Inbound program is not processing succusfully when its run first time but works when reprocessed.
I appreciate if anyone can send their views.
Best Regards
SK

Hi!
You might set the processing to check not only once the relevant IDocs, but more times...
Check out these programs, and set them into a batch job periodically...
RBDMANI2
RBDAPP01
Regards
Tamá

Logic for WBS ELEMENT

hi
i have an issue in the report, the problem is
in the selection screen i have an WBS ELEMENT as an select option(there is no belnr in selection scrren)
for eg- if i enter
COMP CODE = 0010
WBS ELEMNT = 23456
YEAR = 2008.
For the above details there are 2 line items in table for that particular belnr as
BUKRS BELNR YEAR BUZEI WBSELT SHKZG
0010 40000050 2008 001 23456 S
0010 40000050 2008 002 00000 H
there is only one line item for WBS ELEMENT IN BSEG TABLE.
So i am getting debit(SHKZG-S) value but i am not getting credit value if i write the select query as below.
SELECT bukrs
belnr
gjahr
buzei
sgtxt
kostl
aufnr
lifnr
ebeln
projk
FROM bseg
into table gt_bseg
for all entries in i_get
where bukrs eq i_get-bukrs
and belnr eq i_get-belnr
and gjahr eq i_get-ryear
and buzei eq i_get-buzei
and projk in s_projk.
please help how to get both values.help with code
thanks in advance,
one of the friend from SDN gave the following solution to my problem
but here he kept KOART = D, WHEREAS FOR MY CODE OTHERLINEITEM MISSED WOULD BE CREDIT OR DEBIT ONCE IT MAY BE MISSED THE CREDIT LINEITEM OR DEBIT ONE.
LOOP AT GT_BSEG.
select single BELNR KOART WRBTR PROJK FROM BSEG INTO wa_bseg WHERE BELNR = BSEG-BELNR AND KOART = 'D'.
append the values of wa_bseg to it_bseg.
endloop.
i have faced same problem if u observe the table BSEG if KOART value is D , in that line item you cant get the PROJK value so
from above select statemnt u can retrieve that value
finally in it_bseg u can get the lineitems which are emitted by your select query
PLEASE HELP ME

>
sai latha wrote:
> hi
>
> i have an issue in the report, the problem is
> in the selection screen i have an WBS ELEMENT as an select option(there is no belnr in selection scrren)
> for eg- if i enter
> COMP CODE = 0010
> WBS ELEMNT = 23456
> YEAR = 2008.
>
If you're trying to select from BSEG using only these selection criteria, then your query is likely to be very, very slow. Since BSEG is a cluster table and therefore only the key is used for the query, you need to specifiy at least BUKRS and BELNR to get any sort of decent performance.
If I wanted to select using WBS element (or any controlling object) my starting point would be the Controlling tables COEP and COBK, or COVP which is a view of the two; after all, the Controlling tables were set up specifically to deal with this sort of query.
Once you've picked up the line you want with your WBS element selection, you can get any of the other lines on the document by selecting from BSEG using the reference document fields held in the Controlling tables.

Planning Layout for WBS Elements

Any one have any idea how to set up the planning layout for WBS ELEMENTS & COST CENTER?
We are trying to plan for WBS elements and Cost center through CJR2 but I don't have any layout designed for this.
Any ideas or suggestions?

I doubt if you can have a single layout for planning both at Cost Centre and WBS level.
But you can create your own layout by copying the standard planning layout under a different name and then change the copy (T code OPO1)
We in our project created a layout with WBS Element (PSPGR) and Cost Element (KAGRU) as Characteristic Values with lead column structure 'Characteristic value and name'.
You then create/assign a Planner Profile>Planning Area>Planning layout using T Code KP34.
Call/change your planner profile (T code KP04) to above before doing the cost planning in CJR2.
Regards
Sreenivas

Permit classification for WBS element (for PM order)

Similar Messages

Maybe you are looking for