Personal Developer Problem
When I try to run Personal Developer on my PC, it asks for Host String also. What should be given there? I tried with "Orcl" & "Oracle", but was futility in vain.
Please help.
Regards
Anvita Gupta
dont give any thing
user scott
pass tiger
let me knowhere [email protected]
i am anubhav from india
Similar Messages
-
I've seen this sort of behaviour on two occasions.
The first is when the partition being started does not have enough memory
and rather than complain as you would normally expect simply grinds to a
halt. Its worth checking the ftexec and node manager log files to see if
this is the case.
The second is when an ftexec process is being started for the first time
and the node upon which it is starting is very busy. Every now and then
the partition workshop will sit there with the ftexec pending with no
discernable activity going on. In this case I would normally expect an
exception after about 10-15 minutes. If I then attempt to re-run the
application everything is normally fine.
We are currently running Forte 3.0.G.2 and we use sequent symmetry boxes
for our server.
One other thing worth checking is whether it is the machine causing the
problem, or, the workspace you are running from. We have had some
interesting problems with a single workspace in a repository getting
completely confused, which, when integrated wipes out all the other
workspaces in the repository as they are updated.
Good luck.
Darren
PanCredit Ltd
UK
From: [email protected]
To: [email protected]
Subject: Development problems
Date: 03 February 1999 16:55
We recently started having problems running one of our applications fromthe
partition workshop in development, but it ONLY seems to be on one persons
machine. When running the application from this particular machine, it
appears to start running, but then just sort of goes off into lala land &
never dies or raises an exception or any sort of error. If we bring upthe
NT task manager, the ftexec seems to be getting cpu time for awhile, but
then it just stops getting cycles??
I had him create a new workspace(I was able to run the application on my
machine from his old workspace) which didn't matter. Other developers can
run the same application from their machines too?? We have NT 4.0 clients
running Forte 3.0.J.1 & a the rpserver is running on Digital Unix 4.0.D.Any
ideas would be GREATLY appreciated!! Thanks!
Doug Scurr
HealthPartners
8100 34th Avenue South
Minneapolis, MN 55440-1309
(612)883-7317
[email protected] <[email protected]>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Douglas,
I concur with Len. Try trc:os:1:1 and 5:5. I suspect that it's a
memory problem, especially if the same workspace works on other
machines.
Len,
Boy, once you became an internationally recognized FORTE consultant, I
never hear from you! Drop me a line. I hear it got chilly in the
midwest this winter.
Mark.
Len Leber <[email protected]> wrote:
>
Douglas --
I suggest you turn on some extra logging and collect dayta while itruns. Some
likely symptoms are missing files or memory problems.
-- Len Leber
ATG
[email protected] wrote:
We recently started having problems running one of our
applications from the
partition workshop in development, but it ONLY seems to be on onepersons
machine. When running the application from this particularmachine, it
appears to start running, but then just sort of goes off into lalaland &
never dies or raises an exception or any sort of error. If webring up the
NT task manager, the ftexec seems to be getting cpu time forawhile, but
then it just stops getting cycles??
I had him create a new workspace(I was able to run the applicationon my
machine from his old workspace) which didn't matter. Otherdevelopers can
run the same application from their machines too?? We have NT 4.0clients
running Forte 3.0.J.1 & a the rpserver is running on Digital Unix4.0.D. Any
ideas would be GREATLY appreciated!! Thanks!
Doug Scurr
HealthPartners
8100 34th Avenue South
Minneapolis, MN 55440-1309
(612)883-7317
[email protected]
<[email protected]>
>>
>>
>>
Part 1.2 Type: application/ms-tnef
Encoding: base64-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
>
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
What is standard authorization object for Personal development P_PLOG
Hi,
Recently i got a object in HR and i dont have any experince in HR.Could you guide me how to asssign standard authorisation object for the personal development p_plog? how to see the infotypes and what is the header field in innfotypes?1-First of all the object is "PLOG" for personal planning. Theres no object with p_plog , most of time to maintain HR master we use object P_ORGIN.
2- You want to assign authorization for certain infotypes?
if yes, you have to go TR.PFCG and assign the authorization to that specific role.
Now you might have question , how youll will track down the roles against the authorization object .
Therere several ways , you can go to Tr.SUIM and find reports by user , roles etc.
You can also go SE16-> give table AGR_1251, give object and you can see the values in table.
After finding the suitable roles you can go to PFCG and assign the values to the roles.
As a good practice its better to create your OWN role Z:hrXXXX and assign it to users.
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Knowledge comes but wisdom lingers!!" -
Personality development plan customization
Hi All,
Good Morning.
I am new into OA framework.Here i got requirement Personality development plan customization in r12 version.
Navigation: Performance Management > Competence Appraisal Plan / Self Assessment > Appraisals Action Button > Final Ratings
in competency gaps page i have to add one fiels ie prioratise .this field is not in Standard Table dual.
Standard table is "Dual". can we add field when standard table is dual?
Please give me reply as soon as possible
Regards
RamojiHi,
Post your question in [Technology - OA Framework|http://forums.oracle.com/forums/forum.jspa?forumID=210] forum, you would probably get a better/faster response.
Regards,
Hussein -
Personal number problem in the Custom HCM Process
We developed custom ESS-MSS application using Webdynpro ABAP and SAP HCM is backend for employees,Managers and HR data.
User A has custom ess role and standard ess(Webdynpro java ESS-MSS business package)
First time in the Custom ess role Employee(User A) try to change the personal information it is giving error
"Process Zxxx only useful if personnel number is specified"
If the Same Employee(User A) clicks the Standard ESS role and Come back to the custom ESS role and try to change the Employee
information the HCM process is working
After Clicking Std ESS role and Come back to the Custom ESS role the error does not exist.
else,
"Process Zxxx only useful if personnel number is specified" .
how the pernr details of the employee is getting populated to memory variable ESS01
Can you please help me how to solve the problem.Hi,
Thanks for your reply
We have mapped the user for the employee at PA30 trans through communication info 105 and sub 0001
The iview, does not give any error
if we execute
1.Standard Employee self service
2.then running our custom role and hence custom iview
In the appintegrated iview, we are calling asr_process_execute (WD ABAP standard application) with the parameter
Process=Zxxx&GET_PERNR=X&PERNR_MEM_ID=ESS01
We found thatthere was an entry for this user at table "indx" when we execute Standard Employee self service.
Also,
If the table "INDX" has an entry for the user, then our custom iview runs with out any error, since the value for the
MEMID= ESS01 exists.
Apart from mapping the user through comm info type 105, what we shoud do to have an entry for this user at table "INDX"
Please give suggestion
please help me
Thanks -
We recently started having problems running one of our applications from the
partition workshop in development, but it ONLY seems to be on one persons
machine. When running the application from this particular machine, it
appears to start running, but then just sort of goes off into lala land &
never dies or raises an exception or any sort of error. If we bring up the
NT task manager, the ftexec seems to be getting cpu time for awhile, but
then it just stops getting cycles??
I had him create a new workspace(I was able to run the application on my
machine from his old workspace) which didn't matter. Other developers can
run the same application from their machines too?? We have NT 4.0 clients
running Forte 3.0.J.1 & a the rpserver is running on Digital Unix 4.0.D. Any
ideas would be GREATLY appreciated!! Thanks!
Doug Scurr
HealthPartners
8100 34th Avenue South
Minneapolis, MN 55440-1309
(612)883-7317
[email protected] <[email protected]>We recently started having problems running one of our applications from the
partition workshop in development, but it ONLY seems to be on one persons
machine. When running the application from this particular machine, it
appears to start running, but then just sort of goes off into lala land &
never dies or raises an exception or any sort of error. If we bring up the
NT task manager, the ftexec seems to be getting cpu time for awhile, but
then it just stops getting cycles??
I had him create a new workspace(I was able to run the application on my
machine from his old workspace) which didn't matter. Other developers can
run the same application from their machines too?? We have NT 4.0 clients
running Forte 3.0.J.1 & a the rpserver is running on Digital Unix 4.0.D. Any
ideas would be GREATLY appreciated!! Thanks!
Doug Scurr
HealthPartners
8100 34th Avenue South
Minneapolis, MN 55440-1309
(612)883-7317
[email protected] <[email protected]> -
Am I the only person having problems with Verizon's refurbished Androids?
The best way for me to share my issue, is to submit a copy of a letter I have written to Verizon.
I have been a loyal Verizon customer for many years now. I have enjoyed good service until my most recent phone purchase approximately 18 months ago. I purchased an HTC Android, which did not work properly. It was immediately replaced with a refurbished phone from the manufacturer, which also did not work properly. That phone was replaced with another refurbished phone form the manufacturer that did not work properly, but after being given NO OPTIONS, I learned that I would have to live with a partially functional phone. For approximately a year I learned to live with the fact that my date/time stamp would disappear, that sometimes my phone ringer would not work, that I would never get an alert sound when a text message arrived. The worst part of this phone is that periodically it would dump/erase all my text messages. Since Verizon could not solve the problem and since Verizon blamed the manufacturer, I had no options, had no choices. Part of being with Verizon and my crappy phone was forced upon me with a 2 year contract. I would only have to be miserable for one more year. Then one day my phone erased some very important text messages. At this point, I had already spent hours and hours and hours with your tech support, and I decided I needed to try and force a solution. While talking with one of your tech people, I learned that the last phone I had been sent was sent to me with Beta software. The software was so outdated that the phone was not updating itself. In fact we could not update the phone manually. So, the tech person put me into yet another HTC. That HTC did have up to date software, but I was still having problems texting, date disappearing and other glitchy things. So, then the next tech person put me into a Motorola. Leary of droids, I asked for an Iphone but was refused. The tech person told me that I could use my HTC charger for the Motorola, and that he would not be sending me a Motorola charger for the phone. I understood.
So, I’ve been very patient throughout this. I figured I just had a few more months to get through this misery, wait for my contract to expire, get the Iphone. Well, I had not idea that the WORST WAS YET TO COME! So, the Motorola doesn’t charge. I tried charging that phone for 3 days, and nothing. So, back on the phone with your tech support. By the way, whomever reads this letter, I hope that someday you have to go through the tedious phone trees that I had to, only to get to Tech Level 1 which pre-screens, then you have to explain your story ALL OVER AGAIN to level 2 tech support. Of course, I now realize that Verizon thinks that I have hours and hours of time, that it is more important for me to burn 2-3 hours of my time to save Verizon 10 minutes of their time. I now realize just what a low opinion the company has of its “clients.” I actually can’t refer to myself as a client anymore; I think I am one of Verizon’s chumps.
So, back on the phone, more misery, more trips to the post office. This tech person could not believe that the new Motorola was not charging, and when I asked her if I could just get an Iphone, she said, “If you are returning a functional phone with the idea that you will get an Iphone, we will charge your for the returned phone. They will test the phone when it arrives, and if there isn’t anything wrong with it, we will charge you.” WOW. So, not only have I not had a phone that works properly, but I have wasted hours of my valuable time on the phone and running to the post office returning phones, but now I am being threatened by your employee who was implying that I am a liar. BUT WAIT, IT GETS WORSE! So, she sends me another Motorola, and this phone wouldn’t take a charge either. DO YOU THINK SHE SHOULD HAVE SENT ME A MOTOROLA CHARGER INSTEAD OF MAKING ME USE MY HTC CHARGER?! How much money did you save here, $3 for a charger? So the new phone doesn’t charge, and of course now I am back on the phone tree with your tech support. BUT WAIT, IT GETS WORSE! CAN YOU BELIEVE THAT THE WORST IS YET TO COME?
So now I’m very angry. At some point, after a company FAILS you over and over, at some point you have to take matters into your own hands. I figured I am at that point. I ask again for a Iphone, and they say No. At this point I figure I may have to file a small claims against Verizon or pay off my contract, something dramatic, something that will solve the problem. I am now writing down employee names etc. This all went down last Friday, August 24th. I talked with Deshanee. Deshanee determines that the problem is the charger, but I explain to her that I have been reassured by two other tech people that my HTC charger is fine. I told her I was leaving town and needed this resolved. She said that I needed to go to a corporate Verizon store, and there she would arrange for a manager to give me a charger and charge the phone. Really! So during rush hour traffic on a Friday, I get to run to a Verizon store and test something that might not work!!!!! Whomever reads this letter (if it every gets read), I hope that someday you have to go through this hell, frantic, running around, not knowing if I will have this resolved before my trip, and the HUMILIATION of having to do a tremendous amount of footwork, wasted time, wasted hours. You people must really despise your client/chumps to put us through this misery and HELL! I told her that that was unacceptable that I wanted to talk to a supervisor. If I go to a Verizon store during rush hour traffic on a Friday, going on my SIXTH REPLACEMENT PHONE ISSUE, I wanted to know the problem was going to be resolved. I am not a lab rat to be sent around town for an experiment. I asked her to get a supervisor and have him authorize me an Iphone. Deshannee reluctantly consulted with a man by the name of Chad (she refused to give me his last name), and he said, “No.” He did not have any other solution for me other than to run to the Verizon store and test out a new charger. I had visions of me sitting in a Verizon store for 2 hours waiting to see if a phone would charge. At this point I am HATING VERIZON. You have no idea the depth of my anger and resentment towards your company. I wanted to personally talk to Chad, and since it looked like I would have no other choice than to follow my orders from Verizon, I started my way to the Verizon store. By the way, there is a Sprint store within two blocks of that corporate, Verizon store.
So Chad is not available but Denshanee connects me with a very nice supervisor by the name of Mary. Both Denshanne and Mary were courteous and professional, and I do not blame them for anything. I BLAME VERIZON for not giving them any customer service tools to work with. After all I have been through, figure out a way to resolve the problem once and for all. I had to come up with the idea terminating my contract, paying the $200 penalty, Verizon crediting me back the $200, and then I would BUY the ****** IPHONE! I suggested this to Mary, and she said that only the Customer Loyalty Dept could authorize that. So, after being on hold for quite a while, she came back to me to tell me that the Customer Loyalty Department would not authorize it. I was left on my own. Since the Corporate Verizon store would not give me a charger for my phone, I had to buy one. They sold me a Verizon, Universal Wall Charger. More to come on this later. Turns out EVEN THIS ISN’T RIGHT! They should have sold me a Motorola charger. It has taken me weeks to figure out why I can’t transfer data!!!! So, I have spent hours on the phone with Verizon tech support to try and figure out why this ****** phone won’t transfer data. Verizon tech support was NO HELP. THEY DON’T KNOW. So, I had to call Motorola tech support to find out that Verizon’s Universal Wall Chargers are not used for data transfer. If you people were actually trying to drive me crazy, intentionally, I would be afraid for my life. If this is your level of competence when you are trying?
I went on my trip and of course, when I arrived in Europe, my phone did not work. I had to get on your tech support again, and it took 2 hours to trouble shoot the problem. Even though I had called several times to ensure my phone was international ready, to make sure I had a calling plan and a data plan, no one bothered to fill my requests. I believe I should record every phone call to Verizon, document everything. So, even after I got on a data plan, I received alerts that I was mounting over $1,000 in data roaming charges. I had to call Verizon several times from Europe to remedy this. You people just love making things hard. I hate Verizon.
So, my new Motorola does not transfer data to my computer, for a reason I am not sure of, but Motorola claims I have the wrong USB cord. I requested a car charger and was denied that today by your tech support person, Vondra. She said that Verizon only warrants phones, and that we have to buy the chargers and such. Yeah, of course Verizon doesn’t; that would cost you $3? So, I called the Verizon corporate store on La Cienega, the store that refused to give me a charger, that made me buy one (one of your tech people did credit me back for that BTW). I spoke with the manager, Vanessa. She said that they don’t carry Motorola chargers. They sell the phones, but not the chargers. I explained to her about the data transfer problem I was having, and she suggested I buy a memory card reader. GREAT. So, Verizon’s solution is to abandon the idea of having the proper equipment, piece meal a solution and yes, make me pay for it!
So, another item, which your tech support cannot solve, is that the phone does not work while it is being charged. So, I called tech support again, asked to speak with a Supervisor. I was put on hold for a long time, and the tech support person came back and told me that there were no supervisors available and that one would have to call me back. I asked her the name of the supervisor that is supposed to call me back, and she said, “Alvin.”
So, a day has gone by and no call from Alvin. I doubt he will call. Your company is obviously going through some rough times. I am sure that within a few months, Verizon’s incompetence and failings will start to be reflected in your ratings
I have visited the Sprint store, and I am familiarizing myself with what they have to offer. Early next year my contract expires, and most likely I will leave Verizon. I should take you to small claims court! Most of all, I so much regret all the people I referred to you, dozens. I talked up your network, I told everyone how happy I was with the service. I was your advocate. No longer, and I am not putting the same effort into letting people know how horrific Verizon has been with me during these last 18 months. I am counting the months until my contract expires. I will limp along with this broken phone until my contract expires, just has I have done with all the other defective phones Verizon has provided me with. For a year my HTC phone ran on the first generation software, and I managed to just use it as phone, nothing much more, and that’s what I’ll have to do with this ****** piece of crap.I believe you, Ihave been a subscriber for over 8 years and over that period of time I have has some phones fail. This I can accept and understand, however the policy of Verizon of only sending out recertified phones is a joke. I have had over 10 replacement phones sent out to me an none have actually lasted more that 1 month. Last year this went on and on, I was able to fix this by upgrading to the samsung stratosphere. My son's Pantech phone failed and was replaced several times and to resolve this, I ended up purchasing a replacement from Amazon.
My worked fine at first, then the internet started to get really buggy and hard almost impossible to connect. I was very hesitant to have them send a replacement because of my experience with the replacement phones, however I had to concede because I could not connect to the Internet. I was assured that the replacement would undergo a 100++ point check. It arrived and I was happy with it, however a week later, it stopped charging. I spoke with a supervisor and the options he had for me was 1. keep going thru the warranty replacement process, 2 they will send me a downgraded phone (a 3G, unlike the 4G that I bought) or 3. they will buy it back for ... wait for it...$68. Another supervisor told me then they will have to keep sending out phones, every week if needed.
As expected the replacement phone failed again, and out of frustration I called again and they connected me to a manager immediately (my account is flagged because I filed a complaint with the BBB. And for once I got a helpful person, he told me they could not ship a new phone, but a different brand, the Motorola Droid 4, I said I want to keep the Stratosphere because of the car dock and desk dock, he said they would give me new docks as well. This seemed like a good deal, so I accepted. The Droid arrived and I was setting it up, transferred the sim, the 32 GB SD card, contacts and all. I noticed that the sim was not registering, it showed no data, I tried to remove it and it BURNED my hand, needless to say it fried my SD card with all the data, photos, etc....
When I was using a basic phone, this was not a big problem, just move your contacts and you are done. With smart phones this is a lot harder, you have to load all the apps and settings again. My stand is that I am paying $200++ a month for decent service... not even perfect, just decent. I get defective phones and Verizon is not willing to rectify this. I spoke with someone from the executive office of verizon and basically her answer was to keep replacing the phones until one works,, buy an new one at full retail price or get it from a third party like Amazon or Ebay....or...get this since I am 5 months away from my upgrade date, they will LET me do an early upgrade to any non apple product, but PAY an early upgrade penalty.
Right now I think that I will use one of my phones, BUT I will aside from the complaint with the BBB, I am filing a complaint with the FTC. I wrote this on the forums a few weeks ago, but of course no one from Verizon will have the B@ll$ to answer this.
Message was edited by: alexander ruiz -
IWeb hanging at logging into MobileMe (Personal Domain Problem)
I've searched and searched for an answer to my problem all over the internet and these forums and keep coming up blank.
Apologies if the answer is somewhere and I've missed it.
It could be a wider problem with my MobileMe, but iWeb is where it first occurred.
I recently had my personal website forwarding to my MobileMe site, and was using the MobileMe webspace to host my site. I had set my personal domain (in MobileMe) to the personal website. Why I did this I'm not sure, as I wasn't actually using the external webspace, merely forwarding it to my MobileMe site.
However I then decided I wanted to create a new site and this is where the problems began to occur. When I tried to publish the new site, it seemingly tried to publish to personaldomain/new_website name/ which obviously didn't exist as there was no external webspace there.
I then decided to reset everything, get rid of the personal domain setting within MobileMe and just merely forward my external web addresses to my Me sites. Upon deleting my Personal Domain from the mobileme settings page and logging into iWeb, the website name next to my username was still my external website address, and iWeb seemed to think it was all still published (which it was, as when I went to my web.me.com/etc, my website was there) However I wanted to start from scratch and republish everything, so I deleted all the web/sites section from my idisk, and hoped I could republish everything (this could have been a mistake!)
Now when I try to publish, iWeb just hangs at logging into MobileMe and won't publish anything. iPhoto also won't upload new photo albums and neither will aperture. They just hang at syncing galleries.
I'm completely at a loss as to how to proceed. I've deleted preferences from iweb and also logged out of mobileme, put a fake name in and logged back in again (to clear the cache I think) and still iweb hangs. I've even tried creating a new user account and logging in there and still it hangs.
Apologies for the essay of a post, if anyone can help it would be greatly appreciated. Just some suggestions as to where to go would be helpful. I'm wondering if it's something to do with Keychains? I had a brief look in there but it all went over my head. This is the first problem I've ever had with my new mac, and being from a PC background, don't really know where to look to fix things.
Thanks in advance to people who even get through reading the entire post!If stephen's suggestion doesn't help you might consider the following:
Source: http://www.macintouch.com/readerreports/mobileme/index.html#d30jul2008
Page Title: MobileMe
Date: Wednesday, July 30, 2008 9:06:25 AM
Jim Oase
After waiting a day for the rolling restore to happen, I called AppleCare because Apple had sent an email saying my service was back, and it wasn't. I still could send and not receive using Mail.
Here is what fixed it. Go to MobileMe (terrible name) in System Preferences, log out. Then enter a garbage name and password and try to log in. This apparently clears the MobileMe preferences. Then enter your real UserName and PassWord. For me this was lights on.
I am left wondering how long ago I could have had email had I known this preference reset scheme.
Although for a different MMe issue it will clear out the MMe login info so you can enter everything anew and give it a fresh start.
OT -
Hi,
I downloaded and installed the developer suite 10.1.2. When I launched Forms builder I received the message, 'Oracle Forms Designer has encountered a problem and needs to close. The error report said it was in the uiw.dll module. I uninstalled and tried to install it again and got the same error. I then downloaded and installed the 9.0 version. I received the message for the uiw90.dll module. I am running Oracle 11g, on a Windows XP SP3 environment.
Has anyone encountered this error before and have a solution to it?
Thanks,
MarshalPlease start by reading this:
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
Then please explain what you are asking. Proceed further with what?
Information about Forms and how to use it can be found in the product documentation libraray and various white papers available here:
http://www.oracle.com/technetwork/developer-tools/forms/overview/index.html
Designtime information about LOV (list of values, visual attributes, and other objects) are explained in the Forms Builder Online help -
Remove Personal Domain Problem
Hi. I had a personal domain setup and it was working fine. I recently removed the domain from my .Mac account. iWeb still thinks it is publishing to the domain, and shows the little green indicator light at the bottom with my domain. After it publishes, the Visit Site button tries to load up with my domain and not with the .mac address.
How can I get it to revert to the .mac address mode?I'm pretty good on computers but my dad asked him to help him with a Mac problem so here I am...
Our good friend has built our website from his computer at his house, me and my dad need to be able to edit the website using iWeb (the same program our friend uses) so we can make appropriate changes...
We can log into the .Mac the same one that our friend uses but we can't figure out how to actually "load" the work our friend has already done so we can add to it and edit it...
Any advice is appreciated -
I am unable to reverse (cancel, annul, stop, call off, scratch, scrub) the link that has somehow or other been created between Mobile Me and a domain, hosted by GoDaddy, that I own but never use.
So, when I update my iWeb pages and 'publish changes' and then visit my site I find myself on the GoDaddy site.
I admit that I recently discovered that it was possible to have a Mobile Me site forwarded and I even looked at the page in GoGdaddy where it was possible to change the CNAME. however, I did not complete the process.
I have spoken to customer support at GoDaddy, who have been very accommodating, and they assure me that they have cleared any links, but the problem persists.
What next?
Any clues, anyone?
Cordially,
David AmiesOf course there is!
Log into your MobileMe account under System Preferences and then go to the Personal preferences section. Under there you will find on the left hand side, Personal Domain Settings. Click on this and where your personal domain name is entered, there will also be a delete button on the right hand side. Click on delete and your domain is removed. -
Hi,
I am developing applicationn in developer 6i and I am facing problem regarding
displaying records in form. My query is
select ename, edept from sale where city = 'NYK'
suppose this query fetch 10 records and I dispalyed them in developer but problem is that I donot
want to display scroll bar in form and only 10 text items to display 10 record.
some times my query fetch 15 record and I have opted to display 10 record and unchecked the
scroll bar in FORMs designing it displays 10 records and 5 records where shown when i use
key board to go down and then I can see them.
kindly tell me whether I can use some commands to generate text items
dynamically depending upon my records.
If I have ten record then only 10 text items will be displayed and if 15
then only 15 text items.
ThanksPlease post your question in Forms topic
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
Compiling a java source in pl/sql developer - problems
Hi,
i'm using pl/sql developer and i created a javasource like this:
import net.sf.jasperreports.engine.JRException;
import net.sf.jasperreports.engine.JasperFillManager;
create or replace and compile java source named Test as
import net.sf.jasperreports.engine.JasperPrint;
import net.sf.jasperreports.view.JasperViewer;
import persistencia.JdbcDaoFactory;
* @author igor.simoes
public class ProcessoRelController {
the problem is: when i compile the source, an error is displayed(canno't find symbol) in the first line (import net.sf.jasperreports.engine.JRException;)
i wanna know how can i make the oracle JVM see the package(.jar) that contains net.sf.jasperreports.engine.JRException class, and the others classes in the import statement..
thank's
Igor SimõesHi,
Refer the 'Implementing the report service' section in the following article: http://java.dzone.com/articles/java-reporting-part-2
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.util.HashMap;
import net.sf.jasperreports.engine.JRException;
import net.sf.jasperreports.engine.JRExporterParameter;
import net.sf.jasperreports.engine.JasperCompileManager;
import net.sf.jasperreports.engine.JasperExportManager;
import net.sf.jasperreports.engine.JasperFillManager;
import net.sf.jasperreports.engine.JasperPrint;
import net.sf.jasperreports.engine.JasperReport;
import net.sf.jasperreports.engine.export.JRXlsExporter;
public static Connection establishConnection()
Connection connection = null;
try
Class.forName("oracle.jdbc.driver.OracleDriver");
String oracleURL = "jdbc:oracle:thin:@localhost:1521:mySID";
connection = DriverManager.getConnection(oracleURL,"username","password");
connection.setAutoCommit(false);
catch(SQLException exception)
exception.printStackTrace();
return connection;
-Priyanka -
SQL Developer Problems with Microsoft Word Apostrophes
Hi,
I'm trying to copy and paste a list like the following from Microsoft Word to SQL Developer -
'123','456','789'
Shouldnt be a problem.
But when ever I paste it into an sql file in Developer it comes out with different styled apostrophes which SQL Developer does not seem to like -
‘123’,’123’,’123’
Obviously I can just do a find and replace and change all of the problem apostrophes but is there a way to stop the problem occuring?
It doesnt matter what font I am using in Word, I always get the slanted style apostrophes. But in Developer, if I just normally type an apostrophe, I get the acceptable version - 'I hate copying and pasting to/from word it does far to many things I don't want it to do.
A trick that sometimes works for me is to copy in word, paste in notepad, then copy in notepad and paste into SQL developer.
I have replicated your issue but I have found that even this dosn't work.
You could write a VBA macro in word linked to the ctrl + c short cut that does a text copy and a find and replace on the special chars turning them into normal ones but I think this might be overkill. -
SQL Developer:Problem with multi byte size after import using excel format
Hi,
Need your help. I am trying to export multibyte characters from our China instance(r11i instance) using SQL Developer's export data via Excel format into an R12 Vision instance. I have a staging table with exactly the same structure in both instances. Prior to export to excel, I check the byte size of the sample data below using LENGTH and LENGTHB sql functions and these are the results:
Sample data = 材料LI（USD）
LENGTH=9
LENGTHB=13
Then, I exported the table as excel file. Afterwards, I used SQL Developer to import the excel file into the table of the target instance. I check the bytesize again and here are the results:
Sample data = 材料LI（USD）
LENGTH=9
LENGTHB=17
The byte size increased from 13 to 17. I did not change anything on the excel file. Just straight forward export to excel file then imported it to the target instance. How come there is an increase in byte size? Has anyone encountered this in SQL Developer? We really need to export the files as excel.
Source:
Database version = 9.2.0.5.0
Target:
Database version = 11.1.0.7.0
Regards,
Wendell
Edited by: user13038177 on May 13, 2010 9:05 PM
Edited by: user13038177 on May 13, 2010 9:06 PMWendell,
This forum is for handling issues migrating from non-Oracle databases to Oracle databases.
As this is an Oracle to Oracle issue using SQL*Developer export it would be better to open a new thread in the SQL*Developer forum -
SQL Developer
There will be more people there who can help with this problem.
Regards,
Mike
Edited by: mkirtley on May 14, 2010 10:16 AM
Maybe you are looking for
-
Years ago I bought a 3gs and have never backed it up so after I cracked the screen I figured it would be a good idea to do so. I download iTunes and plug in the phone. Drivers load then backup in the summary. Everything goes as planned and iTunes tel
-
New MBP 2012 came with Mountain Lion, I would like to revert to Lion.
Hello! I've recently bought a new MBP 15" ( not retina ) and it came with Mountain Lion. As I use Pro Tools, and lots of third party plugins and I know that it isn't all very compatible yet, I've decided to install Lion instead. So I connected my new
-
Bluetooth mouse buttons do not respond but the mouse icon on the screen follows mouse movements.
Running 10.6.8 and replace my wireless mouse with a Microsoft 5000 Bluetooth. It works fine and then all of the suddon the left, right and wheel will not work. I replace with my usb apple mouse and it does the same. I also tried my old apple wirel
-
Intercompany Posting through IDOC, GL assignment for tax code.....
Dear Experts, I am facing a problem while posting Intercompany invoice through IDOC (intercompany invoice i.e. purchase invoice against the billing document). the billing document, my accounting entry get generated correctly as per the below: Posting
-
Can a shared calendar be combined on main calendar?
I am making a departmental calendar for events, meetings, etc. I am the owner of the calendar and have shared it with others in the department. I have the option to check the box and combine the shared calendar with my main calendar, but the recipien