Personnel number invalid on posting date

Hi All,
While doing posting run system is giving an error "The personnel number 0013xxxx entered is not valid at posting date 25.10.2010.
We have newly hired(On date 01.09.2010) this emp and first time we ran his payroll from Sept 2010 till Oct 2010 and doing payroll posting in month of Oct 2010. That means system has done retro from sept 2010.
Can anybody put some light on this error ? as why this error is occuring...Do we need to check any config or table entries ?
Regards,
Pradeep
Edited by: pradeep pai on Nov 30, 2010 1:25 PM

I am facing the same issue.... Any help would be appreciated. I have already check IT0001 and IT0027 and there is no vendor payments....
IT0001 has an invalid cost center but that is true for an other guy as well but he is not showing this warning message. My issue details are
I am getting a warning message that says Personeel Numner 10023XXXX invvalid when we do the payroll posting. Details of the error as per SAP message are personnel number 10023XXX is not valid at posting date 07/03/2011.
When checking the personnel number the system found that employee 10023XXXX is not active on 07/03/2011. procedure is to wither enter a valid personnel number or if you do not want the system check the personnel number in CO then you can switch off this message in customizing under controlling section.
When i go into controlling message # that is SAp gives is not there. This employee is recently been made inactive in the past and it had retroed back to last few periods.... All the other ianctive people are fine and there payroll as well as posting is fine. I dont understand why this warning message is coming. I have checked other employees with the same cost centre and company code and they are fine. Not sure why only this employee .....
Any suggestions...
Regards
Raja

Similar Messages

Linking personnel number with vendor master data

Hello,
When i am created vendor master data,that time Personnel number field is showing "No values found"
What does it mean?
Thanks.

Hi Pari,
It appears that you are treating employee as vendor. You have not maintajned the personnel number of employees (in HR Module). The personnel number is the only feature within a client which is unique to an employee. You have to enter a personnel number before you can display and maintain an employee's master data and time data.
Thank You.

Start date personnel number infotype 0002 (Personal data)

Hi gurus,
I have the following problem in SAP ECC6.
I created a personnel number with transaction PA40 with start date 200208.
In infotype 0002 (Personal data), after that I have filled various field, if I save, the start date changes from 200208 to 01011900.
Could you help me please?
Thanks in advance
Regards
Raffaele

Hi
Adding to what Mr. Sai Naraynan has said.
See whatever happening at your end is absolutley correct you have to understand the logic behind that.
See Personal data infotype will contain the master data of an employee like name, ***, complete name, form of address etc... whuich is same from his birth so there is no need to have a validity starting from the date of hiring because this data is same from his birth thats why system automatically stamps a Birth date out there.
Hope it clarifies your doubt.
Regards,
Bhupesh Wankar

Personnel number skipped when posting

hi experts..
I got one big problem in my head. When I post to FI (RPCIPE00) there are some personnel number skipped. I curious why this happened? What situation employee can be skipped?
I never got problem like this before?
Thanks in advance

Hi Ahmad
Just an idea: What about the possibility that for some employees no postings are necessary (no payment)?
cheers,
Benno

PERNR - Personnel Number on vendor line item of the FI document Posting

After posting a time sheet (PR05, PRFI, PRRW), the FI document created (display via FB03) has the personnel number on each of the GL line items, but the field is blank on the vendor line item. Does anyone know how to get this to be populated with the same data as being populated on the GL line items (it's the same field BSEG-PERNR)? I've made the field optional on the vendor reconciliation account as well as on the posting key, but no success yet. thanks.

Thanks all for responding.
The vendor master was populated. The strange thing is that the GL line item gets populated but not the vendor line item in BKPF/BSEG. We talked to SAP and to get the vendor line item to populate we would have to do an SAP coding change.
I created a quickview (SQVI) between the appropriate tables to get the report out that we needed (a bit easier than an ABAP) - but nontheless it worked.
thanks again.

How to add a new filed of Personnel number in FB60 data entry screen

Hello SAP Gurus,
We want to have a field to populate the Personnel number in all of the posting document entries via FB60. Besides the existing fields such as the "Doc.header text", "reference", "short text", "text" and "assignment" fields etc, are there any other fields that can be used to enter the Personnel number in the document entries? Maybe there're some fields are ready but the fields have been hidden on the data entry screen currently?
Personnel number is there in the Vendor master data in CoCd data, Accounting Info.
I checked the Field status group of the Vendor Recon A/c in OBC4 and made the personnel number as Optional from suppressed mode in FSG BS41 under Additional Account Assignment.
After doing the above, I am still not able to see the personnel number filed in FB60.
Am I missing anything else due to which I am not able to get the additional filed of personnel number in FB60 screen.
Any help would be greatly appreciated.

Hello Dear
Look FB60 screen has two parts :
The one in which you enter information related to vendor is Header Level, in this case you already assign Personnel No. in Vendor Master so no field is required as Personnel no. will be picked up from Vendor Master level.
The Other is line item level is bottom half part, if you want to assign personnel no. at Expense G/L level then if you scroll right you will find a field for Personnel no. If you can't see the field check your setting at OBVV for the field status group you assign to particular Expense G/L.
Hope you Understood
Cheers
IMK

SAP HCM - Payroll Posting - Finding personnel number for a credit Memo

Hi,
We are currently trying to trace the personnel number associated with a vendor posting from HR-FI. A credit memo has gotten generated against the vendor (union dues vendo).
The FBL1n transaction yields only a consolidated result.
The document number on FB03 displays the line item but without pernr
The PPOIX, PPDIX, PPDHD, PPDIT, REGUH, PAYR and the T51R... series have not yielded the pernr for the specific line item.
The information we currently have:
Run Id:
Document Date:
The amount on the credit memo:
The posting document number:
The transfer line number from HR to FI
Line number on the posting document:
The payroll area of the employee
The wage types associated with the vendor
Need your help on the following:
1) Is there a different place that credit memo needs to be looked into? Have we missed out any table?
2) How do I use the posting document line number, the transfer line number, the document number and run ID in PPDIX to track down the pernr?
Thanks,
Amit

Hi Ted,
Thanks for your response.
One thing I missed out in my original post is that this is third party posting entry.
I have the LINNUM and RUNID. But when I input those values in PPOIX, the search is not returning any results.
This is a third party posting so my EVTYP=TP. Is PPOIX geared to return only PP values? Is there a way I can find the PP correspoding to these line items.
I encountered a couple of problems when I ran through the flow.
From credit memo (FI posting document BKPF), field 'AWKEY' is the reference document back to posting document on payroll site.
I got the AWKEY
Use BKPF-AWKEY and GL account on FI line item you're interested in (BSEG-ALTKT) to get field 'DOCLIN' in table PPDIT (PPDIT-DOCNUM = BKPF-AWKEY, PPDIT-HKONT = BSEG-ALTKT) .
When I looked at BSEG table, I noticed that ALTKT and HKONT are different.
The HKONT has the same GL account as the GL account in BKPF. Itu2019s a/c payable outstanding checks.
But ALTKT value has an account I couldnu2019t get in chart of accounts. Probably a clearing account? Also the original Accounting document line item has a vendor a/c which I believe is in turn linked with G/L account.
So when I input DOCNUM, HKONT in PPDIT, my search is not returning any results. For that matter even with BSEG-HKONT that I described above, it is not returning any results.
Use PPDIT-DOCNUM, PPDIT-DOCLIN to get 'RUNID' , 'LINNUM' from PPDIX (PPDIX-EVTYP = 'PP', PPDIX-DOCNUM = PPDIT-DOCNUM, PPDIX-DOCLIN = PPDIT-DOCLIN).
Since evtyp under consideration is TP, this is not returning results. If I take off the PP input, it does return Line Number and Run Id.
Use PPDIX-RUNID, PPDIX-LINNUM to go get PERNR from PPOIX (PPOIX-RUNID = PPDIX-RUNID, PPOIX-POSTNUM = PPDIX-LINNUM).
Does not return any results.
Sincerely appreciate your help.
Thanks,
Amit

Error -ORA-01483: invalid length for DATE or NUMBER bind variable

In discoverer plus, attempt to save a discoverer workbook into the database fails with the error:
ORA-01483 invalid length for DATE or NUMBER bind variable
The same workbook can be safely saved in "My Computer".
Any idea why and what is the solution.

Why: not quite sure, probably the code is validating the workbook when it saves it to the db and you've got an error in the sql. What happens when you run the workbook that you saved to the file system? Does it show the same error when run?
Solution: Can you post the sql in the workbook? In the meantime try the following: Replace any to_char statements around dates with to_date statements instead. For example:
Replace:
where to_char(mydate, 'dd-mon-yyyy') = '05-apr-2009'
With:
where mydate = to_date('05-APR-2009','DD-MON-YYYY')

MIGO Posting Date based on GR/GI Slip Number

Dear Friends.
I need your great Inputs
1) I am creating gatepass ticket using T-code LECI,
    Here I am getting Sequence Number like 12 and also
    I am entering here Check-In date like 05.06.2005.
2) In MIGO Transaction,Goods Receipt Purchase Order Screen -->General header :
    when I enter Sequence number 12 in MIGO Transaction(that has been       generated by LECI) in GR/GI Slip no field,the system has to pick        the Check-In Date(05.06.2005) that is been entered in LECI Transaction into Posting date field instead of system date in MIGO automatically.
For the above is there any User-Exit/Badi/ or any other approach?
Please give me your advice.
Thanks.
Surendher Reddy.B

Hello Surendher,
check this MBCF0005.
EXIT_SAPM07DR_001.
Rgds,
Mano Sri

Drill down on posting date and Document number

Hello Gurus,
In a Bex report, I am looking at account balance on a keydate for a G/L Account. When I drill down based on posting date I do not see any values for the keyfigure 'Account balance as on key-date'....But after I drill down on posting date --> document number I get to see values for thie key figure.
What is this strange behaviour? Kindly explain.
Regards,
KP

Hi KK,
This may be due to the values/quantities having different UOM or currency for different documents/posting date.For example, Usually when there are mixed values like this, the aggregated value is not displayed, instead a '*' is displayed in the report result. However there is a setting in BW where you can mention how to handle such mixed values.
So I suggest you first check the currencies for the amount at the posting date/document level(when you drill down). If they are different then check the settings in the transaction SPRO --> SAP Business Information Warehouse --> Report-relevant settings --> General Reporting settings in the Business Explorer --> Presenting the numeric value in the Business Explorer.
Here check the value maintained for 'Mixed Values'. If it is blank, then this is the reason that no value is displayed.
Regards,
Shilpa

Different views in "Personnel Data" tab for a withdrawn personnel number

Hi,
In PA20 one user can see the ticks for "Actions, Organizational Assignment & Personal Data" in "Personnel Data" tab for a personnel number which has been withdrawn.
But another user can see tick only for "Organizational Assignment" in "Personnel Data" tab for the same withdrawn personnel number.
If data is there , it should be seen for both of them , isnt it? What could be the problem with the second user? Please guide
Regards,
Sush

Hi,
please check country grouping for that user in SU3 Tcode ? are they same
Thanks
vibin

GR Document number & posting date in drill down option? (Reporting)

Dear Experts,
As im new to reporting,i had a requirement from my client..the question is
This is with regards to report Order Values on Posting Date (0PUR_C01_Q00021)
Can you add GR Document number & posting date in drill down option?
i guess if i keep both of the in free characteristic,it will be the result,please suggest me on this
Thanks & Regards,
Srikant

Dear Experts,
My Client requirement is he want GR Document number and GR Positing Date in the drill down option,im not able to find them in the query designer level. the query is under the cube 0PUR_C01. any suggestions will be a great help..
Thanks and Regards,
Srikanth

Personnel number data disappears in Identification tab of BP

Hi Team,
In GUI while creating employee(BUP003) personnel number field's data disappears the first time after clicking save.
This happens in quality, working fine in dev.
Please help me out to fix this.
Regards
Muneera

Hi Santosh,
Refer the link **************** - Step by step procedure to enhance the BP using BDT.
Thanks,
Ritu

CATS-Data Entry Profile-Unable to Enter Personnel Number

Hi,
I am working on CATS. I have created a data entry profile and it is a copy of standard profile HR-ONLY The query is that when I go-to CAT2 the Personnel Number is grayed out meaning I cannot enter the personnel number.
Kindly, help.
Regards,
Garima

Hi garima dutta
go to spro-cross application component -time sheet- specific settings for cats regular-cats regular-set up data entry profile. there you have personnel selection check with your data entry profile whether radio button of time administrator is checked or not. If it is checked then you check your authorization in su03 give the cvr parameter value as your data entry profile and save it. If you have any doubts please feel free to ask me
ok
bye
Naveen

Goods Receipt Number & Its Posting Date

Hi All,
Will you please let me know which datasource field contains Material document no (or) Goods Receipt no and its posting date.
Thanks,
Sri Arun Prian

Hi,
Please check in Table MKPF . Document NO field name is MBLNR and Posting date is BUDAT. Check it in SE11.
REgards
Ram

Personnel number invalid on posting date

Similar Messages

Maybe you are looking for