Phone not ringing and going straight to records message saying it's a private number

Phone is not ringing and callers get a message saying it is a private number.  This is not the message I have recorded.
I have turned the phone off and sinc it with Itunes  What else can I do????

I would suggest you Contact your Carrier...

Similar Messages

  • Phone will not ring and goes to voicemail

    My phone will not ring and always go straight to voicemail.  I have rebooted, updated, etc but still have this problem.  Anyone have a solution???

    Contact your phone carrier.

  • Phone not ringing and voicemail notificati​ons on SMS not occurring

    Can someone help with this issue as it is beginning to drive me nuts !  Phone is not ringing and any voicemail message is not being notified by SMS.  This seems to have been happening since late 2013 but can't be sure of that.  Is this a SIM card issue, or a possible software issue.

    Could be either. 
    Are you using a Q10?  Your profile doesn't show a device or carrier.  it really helps us if you have that info added to your profile.  Since you're posting in the Q10 forum I'll assume you have a Q10.
    I would do a security wipe on the device first:
    To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
    http://www.blackberry.com/btsc/KB33591
    Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I run mac os 10.4.11 and firefox 7 will not open, and I get an error message saying firefox is not supported on this version of mac os. is there a different version I can download? Am I missing something?

    firefox used to work no problem, I updated firefox a few month ago, now firefox will not open and I get the error message as above

    As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
    The last version to work on a Intel Mac using OSX 10.4.* is Firefox 3.6.*
    http://www.mozilla.org/en-US/firefox/all-older.html
    http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
    http://www.mozilla.org/en-US/firefox/4.0/system-requirements/
    http://www.mozilla.org/en-US/firefox/3.6/system-requirements/

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • My iphone stopped ringing and goes straight to voicemail. how can i get it to ring again?

    The phone was working normally for almost 2 years, but the last few days it doesn't ring and nobody can reach me.  Help please?

    Of course, you have checked the little slider on the left side near the top that turns off the ringer? I have sometimes had it get bumped so that it wasn't all the way in the on position & so it didn't ring & I missed calls. It wasn't all the way down, so it looked like it was in the ring position, but not all the way. So try turning it to the vibrate position & then  back up to the ring position & see if that will fix it.
    But you might also take a look in Settings. Browse around & possibly a setting somehow got changed.
    A good general thing to do w computing devices (which this is) when they start acting strange or different than normal is to turn it off for a couple of minutes or so. Then turn it back on. That can clear out garbage that can get in the memory somehow. That will often fix things & should be done before any more drastic steps.
    & its probably a good idea to turn it off periodically just to clear out stuff that can get left behind.
    If the above doesn't work & you still haven't figured it out, if you are near an Apple store I would recommend setting up a Genius Bar appt. They should be able to figure it out.
    Unfortunately for me I used to have 2 Apple stores w in about a 10-15 min drive & then a couple more that were just a little further--maybe a half hour & w decent parking available. Now I've moved to Portland & was shocked to discover only 1 Apple Store downtown where you have to pay to park. So I haven't even activated my One to One membership yet.  Did take the Max down there which I guess was simpler than driving.

  • My iphone 4s will not restore and goes into an error message

    My iphone 4s will not allow itunes to install the firmware... Gives me an error code 1

    Error 1 indicates a serious hardware failure.
    Try restoring on another computer, if it still will not restore, take the device to Apple.

  • I just got a swapped phone from apple and i get an error message saying the SIM is not supported.

    Have they sent me a swap that's locked to an operator?

    Send him/her an email to register. You cannot register for them.

  • IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    Call your phone carrier - that's a problem for them to resolve.

  • My Iphone 4 is not ringing and the phone is not muted or water damage! What can I do?

    My phone is not ringing and everything is on and I have checked the settings! I have noticed that when I slide the side button the bell is not showing up! Have I deactivated something?

    Update to IOS 6 seems to have switched the mute key and volume ringers off completely
    go to. this worked for my Iphone 4
    Settings
    General
    Accesability
    Assistive touch switch on.
    my iphone on the side is showing mute not on, using the assistive touch ( the white button that appears on your home screen, go to device and switch the mute key to the opposite. on my phone mute on  (bell with cross through it, opposite to phone), my phone now rings.

  • When my phone rings it goes straight to please wait while your party is reached. how do i get rid of that message?

    when my phone rings it goes straight to please wait while your party is reached. how do i get rid of that message?

    do you mean like when someone calls you, that's what they hear? if that's the case, it may be a ringback tone or feature. i've heard the message that you are describing a few times when i have called people (as opposed to hearing the ringing sound), but i honestly don't know much about it. all i can figure is that it's a "ringback" tone or feature.

  • Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.

    Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.Even though i have been into my settings to check if on. can anyone help?

    Have you checked your sound prefs after you updated the OS? It's possible they got changed during the update.

  • HT1688 phone makes no noise, will not ring and cannot turn ringer up

    phone makes no noise, will not ring and cannot turn ringer up

    Did you check the silence/mute switch on the side of the phone above the vollume buttons?  If you can see an orange line then it wont make any noise.  You should flip it and it should work.

  • Just installed iOS 5 and my phone does not ring and i can't hear my keys stroke sounds

    just installed iOS 5 and my phone does not ring and i can't hear my keys stroke sounds is there any solution to this problem

    If KiltedTim is correct I agree with him. If the phone is not hacked try temporarily disabling your antivirus and firewall that may be blocking access to gs.apple.com. See also this article from Apple: http://support.apple.com/kb/TS3694#error3194

  • Online Number not ringing (And not able to reset p...

    I got reports from several persons who called my online number that it is not ringing, it goes direct to Voice Mail, i checked the requirements to have it working, Have the latest version of Skype (DONE), Be online in the computer (DONE), and if still not ringing, reset the privacy settings, this is where i got stucked. In the support forum i found that the way to reset your privacy settings is to change the setting in TOOLS-->Privacy under "Allow calls to my skype number(s) from..." to "Phone numbers in my contact list only", wait 5 or more minutes, and then switch it back to "anyone". My problem is that no matter how many times I change it to Phone numbers in my contact list only", and no matter how long i wait, when i come back to TOOLS-->Privacy, it is always in "anyone" so i guess there is something wrong with that setup option. Anyone with the same issue and solution? please help ! I'm trying to run a business using this number but all my customers are going straight to the voice mail !

    let me know if you find out anything new - this is also supposed to be my business number and it doesn't work - very frustrating experience.
    good luck!

Maybe you are looking for

  • Is JMF any good if I simply want to find out playback durations?

    Hello. I created a little tool for dealing with playlists of audio tracks. For the user's convenience I display all entries of a playlist in the GUI's JTable, where title and duration of each audio track are listed. Of course a user would like to add

  • Problem downloading Adobe software

    On my recently acquired Yoga 3 Pro I have successfully downloaded and installed software, e.g. Prezi, Office but each time I try to install Photoshop and Premiere Elements 12 from a download I get error messages saying I dont have the right write pri

  • Microsoft Windows and Exchange Cals

    HiI am going through a Microsoft review - for the past 7 months backwards and forwards.We bought out our licensing from osl a couple of years ago. I had 45 core cals which included windows, exchange, sharepoint, endpoint etc, which have been allocate

  • Account analysis report

    Hi, Inventory Control account shows some beginning and ending balance. The sources from Payables and projects, no pending transactions in any module.All date pushed to GL.Nothing struck up in Interface tables also.How to tackle dis issue?? Pls give u

  • Rich/Narendran - uh oh!! Does the shared buffer require unique key per id??

    Rich/Narendran - Something just occurred to me: Does "shared buffer" mean that more than one user can be sharing the same buffer, or is the buffer unique to each user session and is merely "shared" between work processes? If multiple users are sharin