Phonon, amarok2 and backend

Standardly in arch phonon is built without gstreamer support, only with xine. Amarok2 is freezing (playing is freezing) after few minutes (maybe only I have this problem I don;t know, but even if only I have it is important (: ) When I edited a phonon's PKGBUILD (delete a -DWITH_GStreamer=OFF), built phonon, install it, change phonon backend to gstreamer, all is fine.
I think You mainteance phonon without gst because of dependencies, but maybe 'phonon-gstreamer' or something like that is a good idea?

pressh wrote:fyi: http://www.archlinux.org/pipermail/arch … 09971.html
I replyed to this thread a few weeks ago, but unfortunately Pierre never answered to give any valid reason to not allow anyone to use gstreamer:
http://www.archlinux.org/pipermail/arch … 03364.html

Similar Messages

Mapping of invoice document type in SRM and Backend

hi,
I need to map invoice document type in SRM and backend. We are in SRM5.0.
e.g. when we create no PO invoice , we need to select document type from drop down and that document type should be replicated to backend invoice document type.
1. There is no list in drop down of invoice document type ( RE/RN)
2. How it will be replicated to back end document type when enter document type instead of selection?
If anyone came across this, pls let me know.
regards,
Rahul Mandale

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Can the same BADI be called in ESS and Backend ?

Can the same BADI be called in ESS and Backend ? For Eg. HR_IN_LOANS_VALIDATE

What verson of iPhoto did your MacBook Pro come with? If it was iPnoto 8 (09) or earlier you will have to purchase iPhoto 9 (11) from the App Store. If your MBP came with iPhoto 9 preinstalled you should be able to update to 9.4.1 without charge.
However, as Niel pinted out the iPad iPhoto is a different animal (pun intended) entirely and will have to be purchased.
OT

Customizing Portal and Backend

Hello to all,
My job is to get the portal running (EP 6.0). The EP has already been installed and setup with MSS and ESS SAP Business Packages. I must now start customization on both sides - for that I must know the tasks of customizing the Portal and Backend.
Anyone has a document with simply the step by step procedure for customizing (from iviews, users, homepage framework, etc), covering Backend and Portal? Of course I already know a lot of the tasks but I dont want to be miss something, and I want to do things in the right order. Problem is Im not sure what must be done first.
Thanks a lot

Hi,
You can start with this blog and the document attached to it for a good overview some ESS/Portal and backend configuration.
Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
Help on Homepage framework
http://help.sap.com/saphelp_erp2005vp/helpdata/en/aa/9f75620a8d4a2e9181db37f2fa2a62/frameset.htm
Regards,
PK

BW Frontend and Backend and their interface

Hi Experts,
Heard often about this, but only in a very abstryct way. I didn't find any proper definition or boundary in any document
or threat in SDN or elsewhere.
Could anyone please eyplain eaxctly what SAP understands among the expressions "Frontend and Backend" ,
is this delimited on hardware or on software? What is the interface? Are there different interfacres (WEB, EXCEL...).
Thanks and Regards
Joe

Thank you for your input. Your comment helps but I would like more info. It was never part of the process to have to modify the application when hierarchies were changed, is this now the case? BPC users should fully process a dimension, optimize AND modify the application when a hierarchy is changed? Should that be done in all instances when hierarchies change? This seems inconsistent because changing hierarchies never required a "save" of the appliaction in 4.2 and I did not believe it required a "modify" of the application in 5.1 or 7.0.
There are discrepencies between the frontend and backend of the application after dimensions are processed and optimizes are run. The only thing that fixes it is the modify of the application (with the two check boxes checked).
Thanks again for the info! I think I am close to getting the answer I am looking for

Mismatch in EBP and backend SAP system

Hi Experts,
When checking the status of the shopping carts we have found some shopping carts which has status as "Item in Transfer process" but PO has been created in the backend.
We are running the job for CLEAN_REQREQ_UP every hour and BBP_GET_STATUS_2 once daily.
Some shopping carts get their status updated as soon as they are ordered and follow on documents are created. While for a very few may be 2 or 3 shopping carts has a mismatch between their status.
Can anyone guide about the cycle and the programs which runs after shopping cart is approved, follow on documents are created and the status updated back to EB with follow on document information.
Thanks and Regards
Manoj

Hello Manoj,
this is the role of CLEAN_REQREQ_Up to check backend document creation and to update corresponding SC status by:
- inactivating "in Transfer process"
- activating "Follow on doc created"
- flinalizing backend references in BBP_BPBEI
To do so, the scheduled report is scanning table BBP_DOCUMENT_TAB.
This table should be empty (except for new entries added since last run).
Entries remaining in this table means errors. Corresponding errors should be found in Application monitors.
Those entries are flagged 'ERROR_ALERT'.
If you don't find any entry, you can re-create an manual entry for this SC, and next CLEAN_REQREQ_UP will align everything.
Check OSS around BBP_DOCUMENT_TAB, there are some anomalies arround management of those table entries.
Ex: A report has been created to re-create entries for GR (OSS 644963 Regenerating BBP_DOCUMENT_TAB entries).
For your case, there are also 4 reports to analyze and correct SC statuts/links errors:
649788 Shopping cart: Analysis/correction report Z_SC_STATUS_CHECK_1
728536 Shopping cart: Follow-on docs => analysis-/correction report
729967 Shoppng cart:Status I1111,no follow-on docs->analysis report
757625 Incorrect Status I1112->analysis report
755769 Status I1113, no item or header relations->analysis report
Rgds
Christophe

HCM interactive Forms - hide fields and backend connection

Hello,
we plan to implement a personnel transfer workflow based on interactive forms. Because in one step the user should not be able to see a couple of fields, it is possible in interactive forms zu hide fields based on the users role?
I read a lot the last days but what I still havent found out and I hope you can push me in the right direction is, how the connection between backend and Form is working.
Inside of an example form and in the documentation is descriped to use this below code to implement a bushbutton and the send message to create a server round trip. But if I create 2 pushbuttons with the same code, how do I know which button was pressed? Or do I have to create my own events somewhere? Or is there only this one event and I have to set a hidden field with some value via javascript or formcalc to find out whats going on in the form?
$record.CONTROL_PARAM.ISR_EVENT = "USER_EVENT_CHECK"
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
best regards,
Kai

Hey Rajesh
I'm not sure it will work - but its worth a try.
Every time i wont to hide some subforms or UI elements - I determine them as "invisible" by default - and when the conditions are right - I turn them to "visible" (negatively way).
Hopefully it will help you.
Eyal

Differences between showing smartform in Portal and Backend

Hi SAP Experts,
we have developed a smartform which should be opened by clicking on a button integrated in a BSP-Application. All seems to be ok except for one little piece of text that is not shown (Exactly, the text is a calculated value).
We tested the same smart form in backend-system and there the text is shown. There are no problems.
So is there a difference between showing the same smartform in enterprise portal at the one hand and in sap backend at the other hand?
Best Regards,
Nadin
Systems/Software:
Adobe Reader 8
EP 7.0 SP 13
SAP ERP 2005

hi,
what is the link between customised fields in EBP or R3 to portal.
can you explain on this?

Contracts and backend replication

Hi. I am looking for a solution and wonder if any other has come across this challenge. We run SRM 5.0 extended classic. We use purchasing contracts in SRM which works great. Now, we want to replicate the contracts to R/3 as APO and CQM is dependent on the contract information retrieved from R/3. We set up global outline agreements, mapped the pricing conditions in the BADI and replicated those back to R/3, also works nicely. The global Outline agreements however are not seen for source determination for the requisitions in sourcing, and it is hard to modify this as the guid is not passed for the GOA's. Now, I wonder what is the best scenario for this in extended classic.
Summarized, we need sourcable contracts in SRM which are replicated back to R/3 without doing too many modifications from standard.
I would very much appreciate your input!
Best regards
Haakon Onshuus

Hello Haakon,
the best way would be to update to SRM 7.0 ...
In SRM 5.0 local contracts are not transferable to ERP backends, and global outline agreements are no sources in SRM - with SRM 7.0, SAP promises that both is working as there is only one contract type.
Best regards,
Karsten

Using ESS with Portal 7.0 and backend ECC 5.0. Why not?

Hi,
I have this landscape:
server A: Portal 7.0 in WAS 7.0 (2004s) with BP ESS and XSS components
server B: backend ECC 5.0 with EA-HR SP38.
But I am having problems to run some ESS webdynpro iViews (specially personnel info);
According this note: 1007341; this landscape is not supported because is necessary use a separate instance of WAS 6.40 in order to run XSS components.
Why??? Which is the technical reason that I cannot use the j2ee stack from EP 7.0? SAP information about this is so confusing.
if this is impossible to realize, I can use this alternative?:
server A: Portal 7.0 in WAS 7.0 (2004s) with BP ESS
server B: backend ECC 5.0 with EA-HR SP38 and XSS componentes (dual mode stack abap and java both of them 6.40)
As per note 1007341, I need use a third server or I am confusing?. Already having a server which runs E¨P frontend, and other server where it runs the ECC, technically I am not understanding why I need a third server with a older java version than I have in frontend.
This is not supported by a specifically problem? Or can I do if I have a problem and I can fix it with some patch?
Anybody has experiencie using this scheme: Portal 7.0 agains ECC 5.0 for use BP ESS/MSS?
any suggestion will be welcome,
thanks in advance,
regards,
Leandro.

Ok, its true.
My intention is to confirm if is possible install a Java instance in the same server that ECC is running with Abap instance.
My confusion is because note 1007341, in "deviations" part, says:
ECC 5.0 (ERP 2004 back-end system),
XSS 500 on a separate J2EE 6.40, EP NW04s
with business packages ESS and MSS (SAP ERP 2004).
The SAP system only supports this system landscape
if you have installed XSS 500 on a separate J2EE 6.40.
Then, would I install abap stack, and java stack as separate instances (not add-in!) ? and this landscape is supported acordding this note?
(in the example, A and C are in the same server)
thanks in advance!
regards,
Edited by: Leandro Balboni on Aug 12, 2008 5:28 PM

Same business partner number for SRM and backend system

Hello all, I am working in SRM 7.0 in a classic scenario.
I am trying to replicate vendors from backend system to SRM, but I want that all vendors have same number in two systems, for example:
Vendor 1000 in backend shows as 1000 in SRM
How can I do it?
Thanks in advance
Rosa Rodríguez

Hello,
A. You need to customizing settings in SRM system
1. Define Number ranges as External (Same number ranges which are maintained in R3 backend sytem)
(Tcode:BUCF / Path: IMG --> Cross-Application Components --> SAP Business Partner > Basic Settings> Number Ranges and Groupings --> Define Number Ranges)
2. Define Groupings and Assign Number Ranges (Path: IMG --> Cross-Application Components --> SAP Business Partner > Basic Settings> Number Ranges and Groupings --> Define Groupings and Assign Number Ranges )
B. Before replication you need extract payment terms and UOM in SRM system & Create the Vendor root org structure (Tcode: PPOCV_BBP)
@Experts: Please add if i miss any thing apart from this.
Regards,
Suneel Kumar Singan

CL_GUI_ALV_GRID: Line selection and backend table

Dear community,
is there a way to propagate line selection of ALV GRID GUI automagically to the backend data table?
This is my scenario:
1) A table containing several records with one column 'SELECTED' for selection status
2) ALV_GRID to display the table with layout info for line selection
alv_layo-sel_mode   = 'A'.
alv_layo-box_fname = 'SELECTED'.
3) At PBO methods set_table_for_first_display and refresh_table_display are called with the table containing some records marked as 'SELECTED'.
First problem here: 'SELECTED' entries are not propagated to the ALV grid (the lines in the GUI are not marked). I know I could use set_selected_rows to force the selection, but is this really necessary?
4) Then, at PAI method check_changed_data is called (and yes, event mc_evt_modified is registered).
Second problem: Changes in selection are not propagated automagically to the underlying table. I also know I could use get_selected_rows to force this update manually, but again: is this really necessary?
Can anyone explain the behavior why sorting etc. is propagated automatically to the underlying table, but not the selection of rows? Am I missing something?
Hint: Removing box_fname = 'SELECTED' and setting the fieldcatalog to display the column 'SELECTED' as editable checkbox works also. But our users are familiar with the rowmark, so this is no option.
Any suggestions are welcome.
Thanks,
Torsten.
Here an (almost) complete listing of the code:
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS_TITLE_0100.
MODULE INIT_ALV_GRID_0100.
MODULE DISPLAY_DATA_0100.
MODULE SET_GRID_SELECTION_0100.
PROCESS AFTER INPUT.
MODULE EXIT_COMMAND_0100 AT EXIT-COMMAND.
MODULE UPDATE_TABLE_DATA_0100.
MODULE USER_COMMAND_0100.
MODULE init_alv_grid_0100 OUTPUT.
IF NOT gr_container IS BOUND.
*   Container erzeugen
    CREATE OBJECT gr_container ...
*   ALV Grid erstellen
    CREATE OBJECT gr_alv_grid ...
*   ALV für die erste Anzeige vorbereiten
    gs_alv_layo-zebra      = on.         " Gestreifte Anzeige
    gs_alv_layo-no_toolbar = on.         " Keine Toolbar
    gs_alv_layo-no_rowmark = off.        " Keine Zeilenmarkierung
    gs_alv_layo-edit       = off.        " Editieren ermöglichen
    gs_alv_layo-sel_mode   = 'A'.        " Selektionsmodus
    gs_alv_layo-cwidth_opt = off.        " Optimierte Spaltenbreite!
    gs_alv_layo-info_fname = 'LCOLOR'.   " ALV-Control: Feldname mit
                                         " einfacher Farbcodierung für
                                         " Zeile
    gs_alv_layo-ctab_fname = 'CCOLOR'.   " ALV-Control: Feldname mit
                                         " komplexer Farbcodierung
                                         " für Zellen
    gs_alv_layo-box_fname = 'SELECTED'. " Markierte Zeilen
*   Feldkatalog für die Anzeige vorbereiten
*    CLEAR gs_fcat.                       " Mehrfachsel. ermöglichen
*    gs_fcat-fieldname = 'SELECTED'.      " Dazu muss das Feld für die
*    gs_fcat-edit      = on.              " Selektion editierbar sein.
*    gs_fcat-checkbox = on.              " Ausserdem muss die
**   gs_fcat-outputlen = '3'.             " Zeilenmark. eingeschaltet
*    APPEND gs_fcat TO gt_fcat.           " und box_fname gesetzt sein.
*   Ereignisbehandlung
    SET HANDLER
      lcl_event_handler=>on_click
      lcl_event_handler=>on_hotspot
      lcl_event_handler=>on_double_click
      lcl_event_handler=>on_user_command
      lcl_event_handler=>on_data_changed
    FOR gr_alv_grid.
    CALL METHOD gr_alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified
      EXCEPTIONS
        error      = 1
        OTHERS     = 2.
ENDIF.
ENDMODULE.                 " INIT_ALV_GRID_0100 OUTPUT
MODULE display_data_0100 OUTPUT.
* PBO Modul für alle weiteren Anzeigezyklen.
IF gr_alv_grid IS BOUND.
    CALL METHOD gr_alv_grid->set_table_for_first_display ...
ENDIF.
ENDMODULE.                 " DISPLAY_DATA_0100 OUTPUT
MODULE set_grid_selection_0100 OUTPUT.
IF gr_alv_grid IS BOUND.
    CALL METHOD gr_alv_grid->refresh_table_display.
ENDIF.
* Alterative: Set selected rows manually
*    CALL METHOD gr_alv_grid->set_selected_rows
ENDMODULE.                 " SET_GRID_SELECTION_0100 OUTPUT
MODULE update_table_data_0100 INPUT.
    CALL METHOD gr_alv_grid->check_changed_data.
* Alternative: Get selected rows and update table manually
*    CALL METHOD gr_alv_grid->get_selected_rows ...
ENDMODULE.                 " UPDATE_TABLE_DATA_0100 INPUT

Hello Torsten
I may be wrong but I think the field LVC_S_LAYO-BOX_FNAME is a relict from the stone-age SLIS-based ALV programming.
Using modern OO-based ALV we do not need any kind of "MARK" row but we have the appropriate methods available.
Regards
Uwe

Date format mismatch between OIM 11gR2 GTC and backend custom database table (Oracle 11g R2)

Hi,
We have an OIM 11g R2 version running that has a GTC installed and configured. The GTC is used to provision to a 11g R2 database table via the DBAT 9.1.0.5.0 connector. Now the requirement is that the timestamp be recorded in the backend DB when a new record is provisioned to it using the GTC.
During the setup of the GTC, the target system date format is asked for should be one from among the values allowed by the following predefined formats:
Customizing Formats (The Java&trade; Tutorials &gt; Internationalization &gt; Formatting)
Now our problem is that the target DB to which the provisioning is supposed to happen, isn't under our control and hence we cannot change its schema, and the date format in that table is of the type "01-JAN-10 12.00.00.000000000 AM", which translates to "dd-MMM-yy hh.mm.ss.fffffffff (AM/PM)".
On the other hand, as you can see from the above link, none of the values that OIM allows to be passed through the GTC allow for that format to be used.
Does anyone know of any way in which we can intercept the GTC provisioning request and convert the date on the fly, after OIM has passed on the control, but before the values are written into the DB table, or does anyone know of any workarounds to this issue?
I'd really appreciate it if someone could provide a solution to this.
Thanks.

[http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/refsched.htm#CIHBFCJG]
See 26.6 for the plugin.zip directory structure, and as I said, I used the same method on a previous task in the same OIM instance.
Edited by: 939908 on Jan 31, 2013 8:04 AM

Web Dynpro Java Internationalization and backend ABAP function modules

Friends,
I have a requirement where I want my Web Dynpro Java application to support BRAZIL and CHINESE.
I have been through the sample programs and tutorials and I understand how to support my application in these 2 languages. The challenge I am facing is how to communicate the language to the backend code (ABAP function modules) so that the function modules can written language specific error messages and texts.
I searched SDN but could not find anything. Your help is appreciated.

Prashant,
When you are configuring JCo connection in WebDynpro Content Administrator, just left language settings blank for metadata connection (you may do the same for data connection). Now WD will supply language of currently logged-in user when obtaining connection settings from system landscape and you'll get necessary functionality.
By default locale of user determined by parameter sap-locale (sap-locale=de_DE for example), settings of user's browser and lastly preferences of user stored in UME.
Btw, BRAZIL (or Portugees for this matter) is not fully supported language by SAP, so R/3 side may be not translated or partly translated.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Dimension and Application limitations SAP BPC and Backend BIW

Hi All,
Please let me know what is the maximum limitations:
1. Dimensions in an application and its backend support in BIW
2. MaxApplication in Application Set.
Thanks & Regards,
Kashvi

Hi,
Technically the maximum possible number of dimensions in BPC NW applicaiton is 3224.
/people/pravin.datar/blog/2008/10/28/the-conundrum-of-time-dimension
As no one can practically create these many dimensions in an application. If you have 13 n , the performance can be optimized because then each BPC dimension is line item dimension by default as this happens automatically.
Thanks.

Phonon, amarok2 and backend

Similar Messages

Maybe you are looking for