Photoshop Elements 8 "Watch Files" function produces error message
My new PE8 is on a Windows 7 laptop and my pictures are on a networked server operating under Windows XP. The Windows file sharing works fine and I have successfully imported all pictures into the new PE 8 organiser catalogue. So far so good. However, when I try to implement "Watch Folders" by using the "Browse" command, the correct path "\\server\Data (D)\Server-pictures\" comes into the "Watch Folders" window. Then, when I click on "OK",I receive an errror massage: "The Watch Folder Service returned an error "Access is denied". Does anyone have a solution to the problem?
Hi John,
Thank you very much. I will try that tomorrow (I'm in Germany and its getting late!). Please can you tell me how to apply the "UNC syntax (\\mycomputer\photos)" you mention to the path which the Browse command in the Watch Folders set-up produces. That is: " \\Server\Data_(D)\Server_Pictures\".
Also if you have another clue about how to deal with the change to "Services" it would help a lot. I have tried to do as you suggest and after I've put the user password in, I get a message "System Service Management could not detirmine whether the account "Admin1-pc\Tom" already has the Log on as a Service right. If not the Service might ot run correctly" When I restart the service I sure enough get the error message "1069 Windows could not start the service due to log on failure". What have I not done?Thanks in advance for your patience!
Similar Messages
-
I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?
Hi,
Which operating system are you running on?
What updates are you trying to download?
The last update was 9.0.3 - check by loading the editor and going to Help -> About Photoshop Elements
The last supported Camera raw is ACR 6.5 - check by loading the editor and going to Help -> About Plug-ins -> Camera Raw
Do you have a reason to update?
Brian -
Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
Photoshop Elements 12 and Windows 8.1 error message
Hi,
I have just installed Photoshop Elements 12 on my laptop which went fine. but when I search the computer for photograph's the following error appears;
''Direct X/Direct Play could not be initialised. Please be sure that it is installed on your system''
I have checked and it is!
Can anyone offer a fix to this problem?
Many thanks
Rocket RobThere have been a few W8.1 posts about this problem. The fix is to enable DirectPlay under legacy features. It's in Control panel -> Programs -> Programs and Features -> Turn windows features on or off.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
I cannot open photo's stored in my i photo library to edit in Photoshop Elements. Adobe comes up with the message program error. I use a Macbook Air.
No, that is done deliberately, since letting other programs poke around in the iphoto library is the fastest known way to corrupt it and make it wither up and die, along with your photos. If you want to use PSE with iphoto you have two choices:
1. Set PSE as your external editor and send the photos from iphoto. Edit them, then save without changing the name or format and iphoto will remember your last saved edits + original, although you have to lose the edits to see the original again. You may need to set the editor prefs>saving files>on first save to save over existing to make this work.
2. Export the photos from iphoto, use file>open in PSE, make all the changes of any sort that you like, save the file, and import it to iphoto as a new file. -
By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.
Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE. -
I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?
Did you tried uninstalling and then installing it again?
Ankush -
Where is photoshop elements 11 catalog files stored in windows 7 for carbonite to back up?
Where is photoshop elements 11 catalog files stored in windows 7 for carbonite to back up? Also any other files besides the pictures that I should back up?
[email protected] wrote:
Where is photoshop elements 11 catalog files stored in windows 7 for carbonite to back up? Also any other files besides the pictures that I should back up?
Very important : your catalog does not contain your pictures. They are where you have imported them in your computer. If they are all under a master folder like 'My Pictures' or 'Pictures', you should set your backup software to backup those folders.
The catalog itself is mainly a database keeping all the information about your pictures : location, keywords, ratings, albums...
It's a folder containing the dababase and several other components. You find its location looking in the help section, system info.
The integrated backup / restore process in Elements saves both your media files and the catalog.
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Backing_up_your -
Does Photoshop Elements support raw files from the Panasonic GH3 camera?
Does Photoshop Elements support raw files from the Panasonic GH3 camera?
Yes, if you have PSE 11 (not the mac app store version). You will need to go to Help>Updates in the editor to update ACR to 7.3.
-
I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help please?
click setup, not autoplay.
-
I am trying to uninstall Adobe Photoshop Elements 10 and receive a 1316 error.
I am trying to uninstall Adobe Photoshop Elements 10 and receive a 1316 error. The account already exists. What? I purchased and installed Adobe Photoshop Elements 13 and want to remove the older version. Nothing works.
Downloaded the trail versions and installed. Had to do the trial versions because I no longer have the serial numbers. Once I reinstalled, I was able to uninstall with no problems.
-
I'm working with trial version of Photoshop Elements 12. Layer functions remain grayed out when trying to use them.
You need to have an image open in the main window.
-
I have been using Photoshop Elements 11 photo merge function. However, the Photomerge panorama function is no longer accessible - it is visible but greyed out on the "enhance" menu. I have tried to reinstall software, but no change.
Click on Expert and the Enhance>Photomerge>Photomerge Panorama should be available
-
My CS6 photoshop started showing {cannot perform function programming error}
then it started freezing please help?Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
Fix for iTunes Producer error message? Fixing unallowable image names in iBA Gallery
In Gallery I had image names with unallowable characters, e.g. "photo name.jpg". I changed the name to "photoname.jpg" and re-added it in Inspector>Interaction>Gallery Media. It still appears as "photo name.jpg"??? Even in a new Gallery Widget?
I'm new here so please forgive me if I am violating any protocol. I would greatly appreciate any guidence in correcting my error.
Thanks!!!
Gene Yore
aka eeyoreThank you vinnyvg!
While trying to respond to this iTunes Producer error message,
"ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This<mailto:Error=com.apple.jingle.leghorn.fileformat.ValidationError@5fd2c84f[userString=This> file does not start with a start of image marker.]" at Book (MZItmspBookPackage)
The delivery of your book ended in error because there are image files that do not match the file extension type. Make sure that all image files inside the book file end with one of the following: .jpg or .png and that the image file itself matches the file extension type."
I did have a few tif images which I converted to jpg.
But, I ran across this posting which suggested I had other problems with my naming convention.
https://discussions.apple.com/thread/4788489?start=0&tstart=0
which says
GeePeeGee
This solved my questionRe: Uploading error codes - does anyone speak their tongue?
Feb 15, 2013 9:33 PM (in response to GeePeeGee)
So, it turns out, the problem with these png-images is the NAME. There are no restrictions, to name your pictures, but when you intend to use them in iBooksAuthor, make sure, that there are no "wrong charakters" in the name. You may use a to z charakters, 1 to 0 numbers and "-" and "_". That's it.
The file "St. Giles.jpg" has
a) a ".", which is wrong and
b) an empty space, which is wrong too.
When you use screenshots, things are getting even worse "Bildschirmfoto 2013-02-08 um 08.02. 15.50.19".
So, if there are error codes as specified, you have to go through the document, click on each and every image and then check the filename. As you see below, you must activate the image itself to see the filename (in this case the filename is corrcect)."
eeyor
Maybe you are looking for
-
Workbooks only able to 'save as' while system is not open
Hi Gurus, My client has been working with it's BW system fully opened for the last three years. Users could then access a workbook through BEx Analyzer (wether it was in the role or favorites area) make any neccessary changes and then save it. Now th
-
Ok, so the other day I got my phone out of my pocket and I noticed a line near the top edge of my screen. The line is straight, about 15mm long and is parallel to the top edge. I have an Invisible Shield on my phone and I haven't dropped it or anythi
-
Driver for Canon c5035i on Mac OSX 10.10
Hi, I am working on OS X 10.10 on and I cannot connect to a Canon C5035i printer. I have downloaded each and every driver I could on the Canon website but the printer is not recognized. Even by pointing it with its IP address, the driver is not reco
-
Hi friends , I need your expertise help on the following issue We are working in ECC 6.0 version and we have many company codes for various countries . When ever we create PO for Brazil company code then we are getting a additional tab at item level
-
Demonstration der Performance von Photoshop
Hallo, mich würde es interessieren, Fotos zu sehen, in der Originalversion und in der mit Photoshop bearbeiteten Version, um zu sehen, was dieses Programm alles drauf hat. Vielen Dank für jede Antwort. Mit freundlichen Grüßen Aloha