Pi 7.1 Installation Hetrogeneous System

Hi All,
Installed PI 7.1 on hetrogeneous landscape.
DB on Linux and SCS on Windows.
Now trying to install PI Primary Application servr on Windows but geting error when providing Java Based Software Components.
This is the log in sapinst dir
===========
Dec 16, 2009 4:37:21 PM Error: main()
[EXCEPTION]
java.lang.NoClassDefFoundError: iaik/utils/Base64Exception
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:129)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:74)
     at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:99)
     at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:183)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.lang.ClassNotFoundException: iaik.utils.Base64Exception
     at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:917)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:808)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:756)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
     ... 12 more
Dec 16, 2009 4:37:21 PM Info: Leaving with return code 99'.
ERROR 2009-12-16 16:37:22.62
FCO-00011 The step getJavaLoadType with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|getJavaLoadType was executed with status ERROR .
==============
Tried placing JCE policy files for Java 1.4.2 and Java 6 fin sys/global/security/lib/engine folder and then restarting the installation but that didn't helped.
Pls let me know any solution for this .
Regards
Ajay

Hi There,
Error:
[EXCEPTION]
java.lang.NoClassDefFoundError: iaik/utils/Base64Exception
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:129)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:74)
     at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:99)
     at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:183)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.lang.ClassNotFoundException: iaik.utils.Base64Exception
     at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:917)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:808)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:756)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
     ... 12 more
Ran into the same problem, so I copied iaik_jce.jar into the installation directory C:\Program Files\sapinst_instdir\PI71\INSTALL\SYSTEM\ORA\DISTRIBUTED\AS\APP1\sapjvm\sapjvm_5\jre\lib\ext
Instllation continues...
Thanks
Ian
Edited by: Ian Willey on Jan 11, 2010 4:23 PM

Similar Messages

Clean installation of system 7.1 on Macintosh SE/30 ?

Could someone please advise how to do a clean installation of System 7.1 on my old Macintosh SE/30 ?
It used to run 6.0.5, I have done an upgrade to 7.1 , but I think I have somehow messed it up.
For instance , the Apple menu is empty.
It still boots fine, and I can read floppies.
I did google a bit, but didn't find any step-by-step instructions how to do the clean installation.
I've got the floppies Install 1 & 2, Tidbits, Printing, Fonts, Disk Tools.
Could some kind soul please advise?
(I've got Macbook's , but I am not really familiar with the vintage Macintoshes.)

Would it be correct to assume that you have the (more common) 1.44 MB System 7.1 floppies (HD diskettes)?
If you do not wish to keep anything of the existing hard disk contents (and if you have backup copies of systems and applications that you want to install), you could simply boot the computer from a Disk Tools floppy and then use Apple HD SC Setup to initialise (format/erase) an Apple hard drive. If the internal hard drive is not an original Apple drive, or if an Apple drive had been reformatted by another program, a modified/special startup floppy with a third-party formatting utility would be needed instead. Thereafter, start up from the System 7.1 Install 1 disk and carry out a fresh installation.
BTW, the floppy drive is first in the boot order, so a Macintosh SE/30 should start from a (bootable) diskette even if the hard disk contains a system. If there is a problem doing this, one can try holding down the four keys Command(Apple) + Option + Shift + Delete(Backspace).
Since old system floppies become unstable with time, it is a good idea to create a set of sector-copied backup disks. The typical application for this would be Disk Copy 4.2. This program was earlier available from Apple, but the older software downloads list is not there any more. A Disk Copy 6.3.3 page can still be found, though.
http://support.apple.com/kb/DL1262
Jan

10.9.1 installs, then system turns off and does not restart.

10.9.1 installs, then system turns off and does not restart. When I eventually turn it back on, it installs again, then turns off.. Endless Cycle.. I have booted to restore disk, found errors that needed to be repaired and tried to repair them but system told me, after a few minutes, its not possible to repair. When I restart back to main disk, it shows the install AGAIN and then turns off. Much appreciate any Ideas?

All I can tell you is that:
Antivirus software, aside from being next to useless on Macs, is a common source of problems with Mavericks.
Google Drive was incompatible with Mavericks last time I looked.
WD hard drives have software that comes on the drives that is incompatible with Mavericks, software that comes with the drives that they want you to install on your mac which is incompatible with Mavericks, and in some cases firmware in the hardware of the drive enclosure itself which is incompatible with Mavericks. And all of this software is completely unnecessary. The good folks at WD have really worked hard to ensure that their products won't work with Mavericks. Bless their little pointy corporate heads. I'll bet that's the last WD drive you'll buy.
Basically you would need to get all this stuff uninstalled from your hard drive before it will reliably work with Mavericks. But even then, it might not work, because old/bad/incompatible software can alter your OS and the kernel such that uninstalling it won't help- the OS/kernel may be damaged such that you have no alternatives other than to erase the HD and start over. And anyway, currently you can't boot your HD to be able to access the Finder so unless you're going to spend a weekend with the Terminal you won't be able to uninstall that stuff in the first place. If I were you I'd just go ahead and erase the HD and install Mavericks from scratch.
10.9.1 doesn't come on a CD. If you had another (working) mac you could make a bootable installer flash drive with DiskMaker X and an 8 GB key drive DiskMaker X (formerly Lion DiskMaker) , but then you'd still have the same problem, the incompatible software would still be on your HD, unless you erase it first before you try installing Mavericks again. So there's really nothing to gain by having the Mavericks installer on a disk.
If you have a third party utility like Techtool Pro 7 you might be able to boot from the TechTool disk and repair your HD enough for it to boot.
Message was edited by: arthur

Got stuck at import abap phase during system installation from system copy

hi,
we have ECC6 ehp4 sp5 level system (linux + db2), due to some reasons our quality system was crashed, we took homogeneous system copy of Production server through sapinst and now we are restoring in Quality server through sapinst. during import ABAP phase its taking long time to pass and system message its showing is
waiting 6134 minites for DDL template file DDLDB6.tpl in dump directories.
i stopped installation and once again started restoration through system copy. Now the system go stuck at the same phase

Hi,
AFAIK, report SMIGR_CREATE_DDL should be run in se38 before starting the export. This generates the required DDL statements which are needed for system copy.
For more info, refer system copy guide in http://service.sap.com/instguides. Hope this helps.
Rgds,
Soujanya

XI Installation: SAP System Account+Password- Login failed

Hi All,
This is my first attempt in installing XI.
I have installed SAP Web AS 6.40 ABAP+Java System and am trying to install XI now.
I can also confirm that my J2EE engine is up and running. I ran the J2EE example on HTTP using port 50000.
Here is my basic config:
VMWare with Windows 2003 Server SE, 60Gigs dedicated HDD space, 2Gig RAM, MS SQL Server 2k Enterprise SP4.
My Problem is that when I run the "XI Installation" from "NetWeaver Components Running on Java" I get asked for my SAP System Account's (user: l01adm) password. I know what my password for System account is, but for some reason I get "Invalid Password" error message from SAPInst GUI program.
Since I am very new to SAP Web AS and XI, there could be quite a few reasons why this is not working.
Could anyone please shed some light my direction regarding the possible things that could be causing my problem?
Regards,
-Alen Ribic

C if any of these threads can help you out -
XI Installation: invalid XI SAP <sid>adm password
Re: invalid password during xi-installation
Also ref note : 721548

Time machine restore selective intonation vs full installation compromised system

I have some questions regarding the above mentioned issue
I have reviewed notes regarding selective app restore method and am aware that there are issues assossiated with failed apps since the original app installer installs files in various libraries and system settings
My backed up Mac contains rogue programs such as the programming app python 3 and various rogue bugs and system settings.
1 Does a full restore reset all backed up system settings or does it keep the fresh installation and include all your apps and settings such as mail accounts mail folders documents pictures movies podcasts etc without the bugs
2 Should the answer to 1 be a yes all compromised settings will be restored, then will I have issues with installing VMware fusion as its an encripted integrated app that I keep all my master business applications but store documents in the Mac documents area.
Other factors
1 My accounting tax business has been hacked over and over again for the last 7 months from start of tax season
2 I have lost 50% of my clients due to the interruptions and been hospitalized twice from sitting on the computer for extended hours and days reinstalling fresh system and restoring Mac documents only, 3 times over, as well as trying to learn everything about best practice, hacks etc
3 I'm using fire vault 2 however the time machine backup is not encripted are there any potential problems with either of the two methods?
4 I will be using a proxy server when I next build the Mac will this be enough to mitigate potential security breach using the full time machine restore method?
5 I have many apps that I have not purchased through the app center and have not kept the keys and will be a headache to get all my details
6 what implications are there as far as the prior keychain access is consurned? How does that get restored?
What is the most effective and efficient method to restore from time machine given above scenario?
Thanking you in advance
Peter

Thank you for your advice
I tried consulting Telstra premium services and other third party security consultants. I explained my steps and procedures upon each fresh installation and the extent of the hacking and they refused to service me. Additionally Telstra security center replied on the issue of using a proxy server that they only support windows operating systems. Last night an apple consultant told me to obtain the proxy server address and he will guide me through to setting it up. I hope this will resolve the security issue. However I'm not entirely sure. My iPhone was also hacked and 8 GB of data used in 1 day untill I caught on. Freaked me out since I had disconnected from the wifi.
I'm currently installing from flash drive and transferring my information from time machine. I think it's a full restore.
I am investing in a website in a couple of weeks however I'm not currently hosting one on my laptop.
Cheers
Peter

Failing installation - Missing system mailbox accounts

I had installed Exchange 2013 SP1 and it seemed to be working correctly. I installed CU7 and everything fell apart. Massive errors all over the place. I gave up and removed all mailboxes, removed the databases, and uninstalled Exchange 2013. I then
went into ADUC and manually removed the remaining system mailboxes.
I reloaded a brand new install of Server 2012 R2 (same name as previous exchange 2013 install) and I went to install Exchange 2013 again. I ran it from the GUI and did not run /PrepareSchema or /PrepareAD in advance. My understanding was that
running the GUI would do this and since the prepare schema switch in particular is unnecessary since the schema was already updated from the previous install I did not worry about it.
Install fails with:
Error:
The following error was generated when "$error.Clear();
          if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
            Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
        " was run: "Microsoft.Exchange.Management.Tasks.RmsSharedIdentityUserNotFoundException: RMS Shared Identity user FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 not found.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow)
   at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.Link()
   at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
So yes the federated mailbox referenced above does not exist. As I said I thought the install would have run the /PrepareAD steps and created it. So I try and run the setup /PrepareAD myself to generate the system mailboxes and that fails:
PS C:\Users\administrator.mydomain.local\Downloads\Exchange2013cu7> .\setup /PrepareAD /IacceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 7 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Client Access role: Front End Transport service
Client Access role: Client Access Front End service
Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites
COMPLETED
    Prerequisite Analysis
FAILED
     A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just thi
s role, or remove the role using Control Panel.
     For more information, visit:
http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InstallWatermar
k.aspx
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
So looking in the ExchangeSetup.log I find this:
[12/22/2014 23:32:27.0524] [1] User specified parameters:
[12/22/2014 23:32:27.0524] [1] Beginning processing Get-SendConnector
[12/22/2014 23:32:27.0587] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[12/22/2014 23:32:27.0587] [1] Request filter in Get Task: (&(objectCategory=msExchRoutingSMTPConnector)(|(&(msExchVersion<=1125899906842624)(!(msExchVersion=1125899906842624)))(!(msExchVersion=*)))).
[12/22/2014 23:32:27.0665] [1] Previous operation run on domain controller 'DC1.mydomain.local'.
[12/22/2014 23:32:27.0665] [1] Preparing to output objects. The maximum size of the result set is "Unlimited".
[12/22/2014 23:32:27.0696] [1] Ending processing Get-SendConnector
[12/22/2014 23:32:27.0696] [1] Evaluated [Rule:SendConnectorException] [HasException:False] [Value:"False"] [ParentValue:"System.DirectoryServices.ResultPropertyCollection"] [Thread:41] [Duration:00:00:09.9289411]
[12/22/2014 23:32:27.0696] [1] Finished [Rule:SendConnectorException] [Duration:00:00:09.9444335]
[12/22/2014 23:32:27.0712] [1] Evaluated [Setting:PowerShellExecutionPolicy] [HasException:False] [Value:"False"] [ParentValue:"<NULL>"] [Thread:45] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Finished [Setting:PowerShellExecutionPolicy] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Evaluated [Rule:PowerShellExecutionPolicyCheckSet] [HasException:False] [Value:"False"] [ParentValue:"<NULL>"] [Thread:45] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Finished [Rule:PowerShellExecutionPolicyCheckSet] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0727] [1] Finished [Analysis:Prereq] [Duration:00:00:10.2101752]
[12/22/2014 23:32:27.0743] [1] Failed [Rule:InstallWatermark] [Message:A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just this role, or remove the role using Control Panel.]
Stuck. Can't finish install, can't uninstall.
I should also mention. I have a working Exchange 2007 server in the environment.

Holy guacamole! I was able to finish the setup.
When I ran setup /PrepareAD I also ran /PrepareSchema and /PrepareDomain but I did it in the usual order: PrepareSchema first, PrepareAD second and PrepareDomain third.
I figured, “can’t hurt, might help.” The schema theoretically should have already been extended when I installed CU7 onto my SP1 install. But as I posted here:
https://social.technet.microsoft.com/Forums/office/en-US/2de87b3f-52e4-4c1c-8f18-421f948d41c3/seemingly-successful-install-of-exchange-2013-sp1-turns-into-many-errors-in-event-logs-after-upgrade?forum=exchangesvrdeploy#697e5abf-180b-4d78-b841-b5a46cb1ee63
that did not go well.
I noticed lots of event log entries on the DC saying the schema had been modified.
That may be normal even if running PrepareSchema again but I wonder if it was not an indication that the schema had actually not been extended from SP1 to CU7 after all.
What was common to both of these problematic installs of CU7 was that I had simply run setup and not done the preinstall switches.
The Exchange installation wizard is supposed to do this but I am now wondering if the wizard for CU7 actually does not.
If CU7 had made the configuration changes on the exchange server without doing whatever changes were necessary from the preinstall switches, that might help explain why it all went wobbly (in the technical sense) after the CU7 install on my first server.
Sadly though I see many of the same error messages in the event log that I was seeing on my first install.

Problems with installation of system and support files with Labview 5.1 on Windows NT.

I make installations disks with Labview 5.1 on Windows NT and I need to add some system files and other support files. When I'm in App Builder I choose them in "Add support files" and I mark their "custom directory destination" (c:\winnt\system32, c:\est\base) but, when I test the installation I see that files don't save in this directory, they save in 'C:\c\winnt\system32' and 'C:\c\est\base'. How can I solve this problem?

Jorge,
I know there were some problems with the LabVIEW 5.1 Application Builder that were fixed in the LabVIEW 5.1.1 Updater. I recommend you download that update to see if this fixes the problem. Also, double-check to make sure you have typed the file paths correctly. If you continue to have problems after installing the 5.1.1 updater, please let me know, and please attach your .bld file so I can examine it for any problems.
Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Installation and system preferences

everytime i install something nothing happens, some word document pops up and its blank, and im talking about installing things like...safari or quicktime, i install them and i get a blank icon and it cant find an application or its a word document. Also, i click on system preferences in the aboce task bar and nothing happens.

Hi cinylouwho
You can get a new copy of OS 10.3 from Amazon for $59.99 but you may as well go all the way and buy Tiger OS10.4.6 and upgrade using the COMBO version of 10.4.8 from here
There will be other updates to do as well but your son should be able to help there just keep the dog out of the way
Also have a look at http://www.apple.com/support/tiger/install/
and http://docs.info.apple.com/article.html?artnum=301270 which explains the different installation methods
DO BACK UP YOUR DATA ASAP
chris
iMac 20" Intel Core Duo 2GB RAM Mac OS X (10.4.8) G3 600 iBook 640MB OS X (10.2.8) Lacie d2 60GB & 250GB Firewire Windows XP

Getting error while installation bi system

Dear Experts ,
please look into my issue
when i started my installation from installation master
in central system screen i selected pre requests and select next button but the system shows error please check in below
child /tmp/sapinst_exe.958672.1284391332/sapinst (pid 852188) has crashed. Executable directory is /tmp/sapinst_exe.958672.1284391332. Contact Support.
iaextract.c:888: child has signaled an exec error. Keeping directory /tmp/sapinst_exe.958672.1284391332
Regards

Hi swathimatta
From the error you pasted here, we can know that definitely your OS is a certain Unix/Linux platform, as the file name is:
/tmp/sapinst_exe.
It is hard to identify the root reason without an OS expert, but what I would like to suggest you is:
1. check the intallation guide again, and especially the OS prerequirment section, to make sure all the requirements have bee
fulfilled.
2. there should be some notes also regarding the version/platform you are installling, please check the notes if there is any similar
issue discussed.
Thanks and best regards,
Thunder

Oracle report installation and system flow

Please help me to give some inputs for the oracle development. The 12 reports wont integrate with the existing system because it was not built by us and also I want to know how the oracle report installation will be done. Please update my diagram scenario of the proposed solution as below
Problems Faced in the existing system:-
================================
•     12 Critical Finance Reports not generated according to user requirements
•     Most of basic feature for reporting purposes are not implemented in current system which is in Oracle Apps 11i - E-Business Suite
•     Takes a lot of time to prepare reports which are needed to be presented for management meetings.
Proposed System
===============
Expectation
•     The finance dept plans to redevelop 12 new critical reports for their system
•     The new implementation must be compatible with the future migration of current Oracle Apps 11i - E-Business Suite to Oracle Apps version 12.
Solution
The new development will be built using the oracle reports and won’t be integrated with the existing application. Oracle reports do not require any specific installation to be done at client PC.
Advantages
•     If it's from a desktop users may find it easier to fire the reports as they may not require to login to Apps.
•     When the Report is displayed, the user can simply generate the report to several formats like PDF, XLS, HTML, RTF, XML etc.
•     Oracle Reports is reliable: You can serve thousands of concurrent users in a secure and reliable manner.
•     Oracle Reports has the ability to apply changes to a report based on a customization file in XML either at runtime or in batch.
Proposed system flow for Oracle reports development
=========================================
12 reports to be installed onto the Red Hat AS3 system <--------------Red Hat AS3(Oracle E-Business Suite Ver 11i (Apps) and Oracle Database Ver 9.2.0.5) -----> Oracle Database

There are groups specific to e-Business Suite. Please delete this post and post your inquiry there.

Arch 2007.8 installation - configure system

i cannot install archlinux 2006.6 because of this issue) so i am trying with arch 2007.08..
when i've set the mountpoints, selected packages, installed packages, i am going to configure system part and the installation shows me configuration files, which are completely empty!
what does it mean? when i want to set root password it gives me "unable run command 'passwd' no such file or directory" when i want to setup grub, i get "cannot find /mnt/boot/grub/stage1"
what should i do? i have read the wiki and it wasn't helpful in this case.. i though the installer generates those configs, or am i wrong?
Last edited by Daan (2009-01-05 01:33:38)

iBertus: i see.. so it doesn't matter which version i would install, pacman -Syu will synchronize with currtent repositories and will upgrade everything from there, right?
i just started to read the main and the most important articles on arch wiki and i must say it's written really great. thank you for your hints.
but if someone would have an idea about those configuration files, during the installation, i would appreciate it, because i would like to understand it and find out where's the problem..
also, there should be something done (from deweloper's side) about that issue i wrote in my first post..

Lost data as after Windows 8.1 installation, non-system drives are showing as raw disk?

Hi Friends!
I installed windows 8.1 on one partition of my laptop which had windows 7 in another partition. Post installation my windows 7 is not showing in boot options and all partitions except the one having windows 8.1 are now showing as raw disk. My data on other
2 partitions is not visible or lost because of this? Can any body help with a sure-shot solution please...

Hi Ashutosh,
What's the meaning of the "raw disk"?
When you sign in the Windows 8.1, can you access other partition under its Windows Explorer? Any content in these drive?
Meanwhile, I suggest you disable "fast startup" setting for test:
1. Control Panel -> Power Options
2. Select Choose what the power button does on left hand side.
3. Click on Change settings that are currently unavailable.
4. Uncheck Turn on fast startup under shutdown settings.
5. Click on the Save changes button.
Karen Hu
TechNet Community Support

ECC Dialog installation heterogeneous systems

Hi Gurus,
We are planning for IPC(internet Pricing and Configurator) for that we need lot's of memory.
Current CI and DB are on the Iseries DB2 but we are planning for Dialog instance to be on Redhat Linux.
Desperate need of help because i didn't work on heterogenoeous enviroment.
Any guide , OSS Notes and links will be apprecaite.
Thanks
Mohammed

>      Thanks for the update i was really apprecaite you gave me the answere for it. I did check the PAM and find out that it will work with windows 2008 server.
Yes, correct.
>       So any one of you have any experience with installation of Application server for ECC install on windows 2008.
Simply follow the installation guide to install a dialog instance:
http://service.sap.com/instguides
--> SAP NetWeaver
--> SAP NetWeaver 7.0 (2004s)
--> Installation
> Installation Guide - SAP NetWeaver 7.0 including EHP 1 Support Release 1 (in the middle of the right frame)
> IBM DB2 for i
---> ABAP
Markus

AppFabric Installation Error System.InvalidCastException

Hi everyone,
I tried to install AppFabric on Windows 7 Enterprise (Service Pack1) 64-bit operating system computer. For development and testing reasons.
I tried some popular workarounds for appfabric including environment variable changes and others, none of them solved my problem. Can you help me please?
When i double click WindowsServerAppFabricSetup_x64.exe, i got System.InvalidCastException which is detailed below.
Unable to cast COM object of type 'CbsSession' to interface type 'ICbsSession'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{75207391-23F2-4396-85F0-8FDB879ED0ED}' failed due to the following error:
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: setup.exe
Problem Signature 02: 1.0.0.0
Problem Signature 03: 4ed52225
Problem Signature 04: Setup
Problem Signature 05: 1.0.0.0
Problem Signature 06: 4ed52225
Problem Signature 07: 1fb
Problem Signature 08: 6
Problem Signature 09: System.InvalidCastException
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1055

Hello yilmazuur,
It looks like your post is not related to Outlook at all. That is why I would recommend asking such questions in the
AppFabric Service and Workflow Management forum instead. There you will get the most qualified answers.

Pi 7.1 Installation Hetrogeneous System

Similar Messages

Maybe you are looking for