PI - Define custom netflow services

Hi,
maybe a stupid question, but we're unabel to find a solution.
Is it possible to define a custom service for netflow?
For example: TCP 443 is listed as "unknown" traffic. We would like to change this traffic to "HTTPs" or "unknown_encrypted".
Do you have any ideas how we can do that?
Thank you
Greetings
Falk

I am using stateless EJBs. I will use a type like this http://dev2dev.bea.com/pub/a/2006/07/custom-load-balancing.html?page=3
          The matter is more how can I specify this to all the cluster and not to each EJB in its deployment descriptor

Similar Messages

  • Adding Custom Backend service form fields in SAP_PA

    Hi All,
    I have defined a rule in the form scenario using a form field in my custom backend service. I want this rule to be used in the operation of the SAP_PA backend service.
    In order to use the rule in SAP_PA, the field from the custom backend service(used in the rule definition) has to be assigned to SAP_PA as well. Unfortunately I am not able to assign it.
    I have seen SAP delivered from scenarios (S_HR_PA_US_CHG_PERM_ADDR) where they have assigned fields from custom backend service to SAP_PA, Can you please guide me how to acheive this ??
    Thanks,
    Bharath

    Try directly adding the field in the form scenario in the SAP_PA service.
    Thanks,
    Aravind

  • Adding Form fields from Custom backend service in SAP_PA

    Hi All,
    I have defined a rule in the form scenario using a form field in my custom backend service. I want this rule to be used in the operation of the SAP_PA backend service.
    In order to use the rule in SAP_PA, the field from the custom backend service(used in the rule definition) has to be assigned to SAP_PA as well. Unfortunately I am not able to assign it.
    I have seen SAP delivered from scenarios (S_HR_PA_US_CHG_PERM_ADDR) where they have assigned fields from custom backend service to SAP_PA, Can you please guide me how to acheive this ??
    Thanks,
    Bharath

    Try directly adding the field in the form scenario in the SAP_PA service.
    Thanks,
    Aravind

  • Replacement of Custom Identity Service in 11g

    Hi,
    I have several BPEL processes (10.1.2) with workflow and have been using Custom Identity Service (configuring is_config.xml) which talks to my database for user and groups etc. What is the mechanism for this in 11g now that is_config.xml is gone?
    Any documentation will be great.
    Thanks in advance.
    Bipul.

    I have been able to successfully implement a custom identity service (pulls users from an Oracle DB). I can select it from the SOA Worklist Application realm drop down and log in with my users.
    I'm wondering, however, if there is a way to mimic this behavior from the BPEL Console and/or from a Java program that utilizes the Worklist APIs. From the BPEL Console, I can initiate my process with no problem but in the Audit trail, it complains about the task not being assigned to a user in the "jazn.com" realm. (That's because the user is defined in my Custom Realm.)
    In my Java application, although I created a workflowContext by passing in the name of my custom realm, I get the same error mentioned above.
    I ended up having to change the default realm in my local server's is_config.xml from jazn to my Custom Realm. Is there a way to specify what realm to use for each process without having to change the default each time?

  • Entering custom backend service in Design Time for Processes and Forms

    Hi all,
    I am trying to create a form that have 3 fields:
    1. pernr
    2. ename
    3. effective_date
    I done all the necessary setup of BADI ,class, interface and form.
    However I cannot seem to insert my custom backend service in the Design Time for Processes and Forms workbench (t-code:hrasr_dt).
    Currently, I am just using SAP_PA for my backend service which is unable to load the ename into my form. The code in my custom class will not be triggered if I did not use my custom back end service in the Design Time for Processes and Forms.
    Whenever I tried using my custom back end service, I will encounter the assertion_failed dump.
    Anyone have any idea?
    Edited by: Siong Chao on Dec 22, 2010 6:35 AM

    Hi Siong Chao,
    The filter name you have used in the BADI for your generic service requires to be defined in the Create / Edit Generic Service - Definition.( You can see this on selecting the Back-end services node under Form Scenario definition while using HRASR_DT transaction code)
    Once you do that, you can import the fields defined in the Generic service BADI - using the same procedure used in standard SAP backend sevices.
    Hope this clarifies. Please let me know if you have any further questions.
    Best Regards
    G Raj

  • Visual Administrator - define custom properties

    Hi,
    Is it possible to define custom properties in Visual Administrator & to access these properties from an EJB?
    Thanks,
    Jeroen

    Hi
    I think you can do it using Configuration Adapter service of visual administrator

  • Custom data service & bindings

    Hi,
    Let's assume I have two tables A and B.
    I want to implement a custom data service method in table A on a row level (ViewRowImpl) which creates a new row in the table B. Right after the row creation I want to open up a dialog and edit the newly created row.
    But, instead of editing the newly created row, my dialog opens up with the currently selected row from the jspx page.
    I don't know how the inform my binding layer of a newly created row and to setup its currency to the new row.
    I understand that I can not access the BindingContext from the custom data service (is this right?) but what would be the right solution?
    Thanks,
    Kresimir

    Thank you Frank,
    maybe I misunderstood the ADF model concept.
    Namely I try to push the data logic as much as possible into ADF Model (ViewRowImpl or AM) layer and expose it through as custom data service methods to the application. But when doing it this way, I need to access the binding layer in order to propagate the changes from the model layer. So when I create a new row in my data service methods, I want to be able to navigate the ADF binding iterator to exactly that row and not to any other row which is currently selected. The operation like first(), next(), execute() which are defined on the model layer are doing exactly the same thing.
    Of course I can write my data operations in the ViewController layer with help of beans and DataControl operation; is this the preferred way how to do it?
    Kresimir
    (btw. excellent book you wrote)

  • Custom Web Service in GRC

    Wanted to know if a stage can be defined that invokes a custom web service that returns an approval  indicator. All the web services I've seen in GRC are at predetermined points or prebuilt integration sections. We need the ability for a custom web service to be invoked when this stage is encountered in the request workflow. If the web service return true, then the stage would be deemed approved and move onto the next state. thanks in advance.

    Hi Brian,
    You may want to post this question in the GRC forum.  I'm not sure how many GRC experts will see it here.
    forum:  Governance, Risk and Compliance (SAP GRC)
    The University Alliances program is exploring GRC for use w/in our program however we're not experts in this topic area today.
    Best Regards,
    Heather
    Edited by: Heather Czech on Dec 4, 2009 6:12 AM

  • Custom Directory service

    Hi everyone,
    I've been trying to create a custom directory service, that would allow me to search the directory using the first name or last name, but only among certain users, eg. those who have "dep1" written in their department field. Is that possible? I tried using the LDAPSearch component, but it doesn't seem to provide the functionality that I need.
    Also, I noticed that in the default directory service "UMX.UMDefaultProviderX" is used instead of LDAPSearch, though I didn't manage to find any documentation on that one. Any information on that component would also be really helpful.
    Thank you,
    Cheers,
    Victor

    Hi Paul,
    I've got another question for you ~ I'm able to pull the department info out of the DC Directory, though when I try to display the results, I get a parser error on the phone.
    I know that it has to do with the fact that only "Telephone" and "Name" are defined as extensions for the CiscoIPPhoneDirectoryEntryType object, and I tried using a field called "Department". So how can I get the phone to display something that isn't defined in the schema?
    If I query the CCM from a browser the directory entry comes back fine with the appropriate DepartmentNumber as configured from the CCM Admin Global Directory, though I just don't know how to get it to display it on the phone ... Any ideas?
    I've attached my xmldirectorylist.asp file for reference.
    Thanks in advance!
    joe

  • How can we define custom error page in protal application

    How can we define custom error page in protal application, like we define "jsp Error page " in JSPs

    Hi,
    Check these:
    Customization of Portal Runtime Errors and portal standard error codes
    http://help.sap.com/saphelp_nw04/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ec/1273b2c413b2449e554eb7b910bce7/frameset.htm
    Regards,
    Praveen Gudapati

  • Custom CAPI service - default value of varchar2 parameter

    I have a Custom CAPI Service function. That function has a varchar2 parameter (argument) and I wish to set a default value NULL for that parameter.
    I set Default=null, and when I generate CAPI package, my function in that package looks like this (notice the quotation marks around null):
    function cs_cjn_prod_cijena
    ( p_nacin_prodaje in varchar2 default 'null'
    return number
    is ...
    And it should look like this:
    function cs_cjn_prod_cijena
    ( p_nacin_prodaje in varchar2 default null
    return number
    is ...
    I tried setting Default Value Type to Literal, Database Function Call, Client Function Call, but it's always the same thing.
    If that parameter was number or date it would generate ok.
    It seems like the bug in "Generate CAPI Definition" Headstart Utility.
    I know that I can make my function's code to treat the string 'null' as a null default value, but I'd like to have a "real" null as a default value.
    Does anybody have a solution for this?
    Thanks!
    Dalibor

    Marcel,
    Thank you for your answer, but it didn't help. I have already tried using Database Function Call. This time I tried deleting the CAPI package from repository before generating it again, like you suggested, but it didn't help.
    I still get: p_nacin_prodaje in varchar2 default 'null'
    Which version of Create CAPI Definition utility do you have?
    My version is: HSU_CAPI, Revision: 6.5.2.0 ("Help/About This Utility" in Headstart Utilities application)
    Thanks again,
    Dalibor

  • Issue in setting custom identity service for soa 11.1.1.4

    Hello,
    I am facing issue in setting custom identity service for soa 11.1.1.4
    It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
    This is configured in jps-config.xml
    The same setup was working in soa 11.1.1.2
    I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
    If my uderstanding is correct,
    Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
    Tried various work arounds but no luck.
    Thanks
    Bala

    Hi...
    Can u tell me how did u set up custom identity service for 11.1.1.2 ?
    Thanks

  • F4 help not working in custom backend service for PD form

    Dear All,
    Iam working with the Create position HCM PD form and i have a requirement to add two fields, one for the company code and the other is for the cost center and then create the relationship betwee the position and the cost center when the form is submitted.
    I have defined a generic service and created an enhancement implementation and linked this generic service to the imppementaion. I have written the logic for the F4 help for the fields in the method GET_HELP_VALUES, i have written the scripting for the drop down field in the form to trigger the F4 help in the form.
    When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form.
    But my current problem in that he values are not getting passed from the method to the field on the screen. I have worked on quite a few scenarios for F4 help and doing validations in the implementation in the PA form and i have seen this functionality working fine.
    My problem here is that i am unable to understand why the F4 value help is not working in my form. The standard PD service SAP_PD is also being used in the form to have the dropdown values for the account assignment feature.
    Could you please suggest me with some clues to fix my issue? i can share more details for further analysis.
    Thanks.
    Best regards,
    Sridharan

    Hi Chris,
    Thanks for your inputs. please see my reply to your questions
    First....are you sure you have "marked" that field as possible for F4 help?
    Reply: Yes
    Second...are you populating the help values strictly from that method...ie. not also using do_operations method to do it. If you refer to the documenation, it points out that trying to use both can cause issues.
    Reply: i am using only the GET_HELP_VALUES method and nothing written in do_operations.
    Third...when you debug your method, do you "see" the help values actually populating and as you say "not coming back to the screen"? I would check this first to make sure that there are actually values being found (ie. the logic within your service is correct).
    Reply: i have put the external break-point in this method and when the form in opened for processing by the HR admininstrator,the form openes up and the control is not being sent to the debugger.  I have written the scripting in the exit event of the events and scripts as suggested in the SAP help document. SO when i click on the dropdown field in the form, the debugger starts and executes the method and the code executes, then no values are populated on the screen.
    Fourth...are you using any generic services for populating help values as well. HCM P&F has a nasty habit of "if one GS fails, they all fail" so often, your service might work fine but an error in another makes yours appear to fail as well....hard to debug and find those kind.
    Reply: Yes i am using the generic service mainly for the purpose of F4 help. I do not see any issue with other gneric services as i have implemented a few generic services for PA forms and they are working fine.
    Fifth...oops...forgot the obvious one...make sure it isn't a security issue...ie. make sure you have access to read the cost centers you want.
    Reply: I dont get any auth error in SU53 while i test the process in R3
    Lastly, you said:
    "When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form."
    You actually should be able to do this using an Advanced/Enhanced Generic Service (if this is in fact the step at which you want a true update to occur). Just a thought.
    Reply: Could you please give some more information about this, how can i achieve it in advanced generic service.
    Appreciate more thougts from you Chris!
    Thanks,
    Sridharan

  • Open letter to Verizon Wireless Management and Customer No-Services

    After more than 10 years as a customer of Verizon Wireless, I have recently encountered several situations that have caused me to begin the process of changing my service provider to another company. Verizon has "zero" loyalty or appreciation of its existing customers; they have poor, and in one particular case, rude customer no-service representatives and policies.
    I purchased a new smart phone for my college daughter. Of course, activation of this new phone required the purchase of a data plan, even though she doesn't need or intend to use data services. (That's fine; I was aware of  this cost even though I believe it to be over-priced). In addition, they also required a $30 fee for signing a new contract. Seriously? Are you kidding me? A fee for the "privilege" of signing a contract with the big, powerful, arrogant Verizon? I don't want a contract in the first place; it is Verizon that wants the contract. They should pay me for signing a contract. I could understand a fee for a new account setup (not really, but it makes a little sense) but a fee for an existing multi-line, long-time customer where the paperwork is nothing more than a mere mouse click of  the "I Agree" button?
    So, the daughter gets her new phone with 24 months of data (for the low, low price of 25 months.... yea right). We take her old phone, which she has had for several years, and decide to use it on another of the lines in our family plan because it has a qwerty keyboard. Now, I learn that I have to sign up for a data plan to use this old phone on a different line. This phone has been in service for several years with no data plan but now I have to have a data plan to use it?  What the **** ??? I only wanted to use the phone for voice calls and a few texts. I have no need for data. This phone, an ENV3, is not well suited for data services anyway. (No, I won't be using this old phone after all.)
    Companies such as yours dream up  junk fees; this one amounts to $1.25 per month additional revenue. They do this as a way of increasing revenue while advertising a lower price, ie advertise $30.00 per month but actually charge $31.25. I suppose they all pat themselves on the back and start counting all the new-found money. The management is so stupid and arrogant that they do not realize what the long-term impact could be. In this particular case, the end result shall be the net loss of $250.00 per month in revenue. I know that you don't care; that is painfully obvious and clear.
    Well Mr. Verizon, you may consider this to be my official letter of resignation. Consider me gone, done, history. I don't need you, your arrogance, or your over-priced services. I currently pay nearly $250/mo to your company for six phone lines, four of which are "very lightly" used for calls and and a few text only. Personally, on my line,  I do nothing but make and/or receive an average of  two  3-minute calls per week. I put up with a lot of crap making my money; I do not have to tolerate any when spending it. I WILL be taking ALL my business elsewhere. Four of my lines are currently month-to-month with no contract. I will be moving these to another provider in the coming week. The remaining ones will be moved upon expiration of their respective contracts.
    Cheers

    Verizon has no obligation to respect your "loyalty." They do, however, have an obligatory fiduciary duty to their investors, hence the "upgrade" fees, "line access" fees, "regulatory recovery" fees, data plan "repuirements", and data caps, none of which are intended to buy YOU anything. They are assessed primarily to provide profits to them and dividends to their investors, along with a source of capital expenditure for their network expansion whose sole purpose is to attract more customers to provide more revenue streams to meet their aforementioned fiduciary duty to serve their executives and investors ever greater profits and dividends. And in this country, that is ALL this wireless game is about. EVERYTHING else, be it customer service, value of service, loyalty or anything else, is secondary. 
    And you think other carriers are any different? Nope. They all are in this for the exact same game, however they choose to play it, plan for plan, fee for fee. Sure, details differ, some plans might look more appealing and for some, prudent shopping around might even net some nominal cost savings, but all in all, they pretty much charge the same fees and require the same data plans, because that's where the big bucks are, and one way or another you will pay them or you will do without (which might be a blessing in disguise).
    I personally don't like this any more than you do, and I would favor strong federal regulatory oversight much as they have in Europe Latin America and Asia, along with homogenized network infrastructure which stimulates competition by allowing easy interoperability of phones and devices irrespective of carrier, but I fear it will be a cold day in hell before we ever see the likes of that here. According Republican thinking, that's just not the "American Way."

  • How to get client IP in custom UCM Service

    how to get client IP in custom UCM Service ?

    have you tried
    binder.getLocal("REMOTE_ADDR");
    Let us know how you get on
    Tim

Maybe you are looking for