PI entry not reverse after canceled GR

Hi Expert,
User Post the GRN, Part I entry get generated. But when reverse the GRN part I entry not updated.
Please give the suggecton how to configure.
Regards
BK GAIKWAD
M9881908615

Post this query in ERP - Logistics Materials Management (MM) and you can expect a faster response, as it is related to MM Module.
Please do not mention your cell number in the Thread. Please edit all your Threads immediately.
Regards,
Rajesh Banka
Edited by: Rajesh Banka on Dec 17, 2009 1:29 PM
Edited by: Rajesh Banka on Dec 17, 2009 1:31 PM

Similar Messages

WIP FI entry not reversed for refurbishment order

Hi Experts,
I have run the WIP and settled the order in July month for one refurb order and the accounting entry is generated, the order status was REL at that time, now in the month of august the GR is done done for the order and the status is DLV, TECO.
In august month when i try to settled the order( not runed KKS2) the WIP entry is not getting reversed.I have done all the WIP settings and in OKGC also the the WIP cancellation if it is DLV and TECO is available for my controlling area.
Could you please advice me what would be the reason for this.
Regards
SB

Ajay,
I donu2019t see test run tab in KKA1, when I executed KKA1 by selecting full log I got the analysis screen and saved.
July u2013 executed KKA1 saved and did settlement Ko88 u2013 WIP FI entry generated
August- Order TECOed and did the settlement Ko88 u2013 FI entry generated but WIP entry was not reversed. Is this because of not running KKS2 in August?
I reversed the settlement in August and did variance calculation and did settlement, even though the WIP entry is not reversed.
Thanks,
SB

Prometric refund not paid after cancelling an exam and my visa card has already been charged USD15 for the cancellation fee !

Below is the email i sent to prometric following up my refund after cancelling an exam and being charged USD 15 for the cancellation fee, but no one is saying anything up to now or any explanation on when i should be receiving my refund.
Hi,
In regards to the above subject field and below cancellation details for an exam 070-681 -
TS: Windows 7 and Office 2010, Deploying.
I have cancelled for the exam and my visa card has been charged for the cancellation fee of USD 15, but i have
not received the refund as yet.
Please do the needful so that i can book for another exam as soon as possible.
Your urgency in this matter will be highly appreciated !
Sincerely,
Salim.
----- Forwarded Message -----
From: @prometric.com" <@prometric.com>
To:
Sent: Monday, August 25, 2014 1:08 PM
Subject: Prometric Exam Information (Z29LON501E)
Dear SALIM,
Thank you for cancelling your exam with Prometric, a leading worldwide provider of comprehensive technology-based testing and assessment services. Your cancellation request has been received and confirmed.
Included within this e-mail is your official appointment summary. Please retain this information for your records.
Included below are answers to frequently asked questions. Please do not reply to this e-mail. For additional assistance, you may visit our website at
Appointment Summary
Order Confirmation Number/Document Number: Z29LON501E
Candidate's Name:
SALIM MOHAMED
Candidate Address:
77852
NAIROBI, KE-300 00610 Kenya
Candidate Company:
Candidate Primary Phone:
Candidate Email Address:
@yahoo.com
Exam Details:
Program Name:
Microsoft (070, 071, 074, MBx)
Exam Name/Description:
TS: Windows 7 and Office 2010, Deploying
Exam Number:
070681
Exam Language:
U.S. ENGLISH
Appointment Date:
Appointment Time:
Appointment Duration (HH:MM):
4:00
Please note that the appointment duration may include an exam tutorial and client survey.
Test Site Code:
KN7H
Test Site Address:
57666,00200,1st Floor, Fedha Plaza,
MPAKA Road Junction, Westlands,
Nairobi, 00200 Kenya
Test Site Phone:
0203744720/
Payment Details:
Exam Price/Currency:
80.00 USD
Discount (if any):
0.00 USD
VAT/GST/Sales Tax:
0.00
Date of Payment/Tax Point:
24 AUG 2014
Total Amount Paid/Currency:
-80.00 USD
Payment Type:
VISA
Cancellation Fee(if any):
15.00 USD
Reschedule Fees (if any):
Payment Date
Amount Paid
Frequently Asked Questions
How will I obtain a refund?
If your credit card has already been charged and you are eligible for a refund, you will receive a refund along with a charge for any applicable fees. If a voucher was used, your same voucher number will be reactivated.
How can I Check my Appointment Status?
If you would like to review the status of your appointment, please visit. Choose "Candidate History" then login using your e-mail address and password.
What if I forget my Prometric Internet password?
If you forget your Prometric Internet password click on the following link
You will be asked to enter your e-mail address or user name, then a new password will be mailed to you at the email address you have on file with Prometric.
How do I update my candidate profile?
Please take a moment and confirm that your personal information listed above is accurate, as this is how your name will appear on any certificate earned and the address to which all certificates and communication will be sent. To ensure proper
delivery of your exam and all certification materials, Prometric must have accurate and current information. If any information needs to be updated, please visit choose "Update Personal Information", then login using your e-mail address and
password.
Please note: This address reflects your permanent, home address. To ensure delivery of official correspondence and certification material, you may also provide name and address information in your
country's official language.
Can I contact Prometric with specific questions?
If you have taken your test, plan to take a test with Prometric, or have any other concerns, please follow the appropriate links below to help solve your issues:

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Movement allowed in Reservation not tick after cancellation

Hi there,
We have a material reservation automatically created in our service module. We posted a goods issue in these materials (2 materials) 261 based in reservation and it was successful.
##result
Material document line item 1
Material document line item 2
However, one of the items needs to be return to stock as it was not needed anymore, hence we do the cancellation of the earlier material document as per normal cancellation.
But I realized, after the cancellation, the result was the first material was successfully cancelled but the 2nd line was not. It created another manual 262 which was not referred to the reservation. So the earlier 261 for reservation line item 2 was not cancelled at all.
When I further checked, the movement allowed box for the reservation line item 2 was not there and completely gone, which was a bit weird because earlier during goods issue we were allowed to post into it.
Now I am trying to activate again the movement allowed box but I cannot edit the reservation itself via MB22 because the reservation was not created manually, it was created auto from service order.
Anyway I can proceed in cancelling the 2nd line based from reservation? Any program or way to activate the movement allowed box in the reservation?
Thank you in advance.
Regards,

Do you two material document or both line items was in same material document?
Why you want to cancel both line items as you want only one line item to be cancelled?
Which Transaction You used for cancellation?
If your are using MBST transaction it tick the line item tick mark automatically as per std.
Check if you might have Un-tick while posting by mistake.
Reservation created through any other trns like service order, PM or PS cannot be changed through MB22.
Rather it can changed by source element.
519580 - FAQ: Reservations

Computer does not startup after canceled software update

I was installing the newest version of leopard. It seems as though leopard installs the update while the computer is starting up (?), as opposed to tiger, which downloaded the update while the computer was still on.
anyway, i was feeling impatient and decided that the update was taking to slowly and that i should just cancel it and update it later.
however i made the stupid decision of forcing my computer to turn off (by holding down the power button)
now whenever i try to turn on the computer, it will get to the screen with the apple and the rotating circle-thing below it
however, it won't get past that part, i left the computer for an hour and when i got back, it was on the same startup screen
i'd appreciate any help anyone can give me

You damaged your OS when you did a force-quit.
Restart your machine with your original Leopard disk in the drive while holding down the "C" key until you see the Apple.
Then you can re-install your OS. You should back up your data to an external hard drive by doing an "archive and install" which is one of the options you will have when you begin.
If you don't have a hard drive, you can just re-install the OS and then update again.
Installing with first backing up is not recommended since there is always the possibility of some problem installing new software that could result in data loss.
If you are going from Leopard 10.5 up to 10.5.2, use Apple's combo updater which should appear in Software Update.

Open quantity in Sales Order did not update after cancelling Reserve Invoice

Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
Thanks in advance.

Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
SO Quantity: 100
Open Quantity: 40
Reserve Invoice 1: 60
Reserve Invoice 2: 40
SO closes before they can make Reserve Invoice 2

After Canceled Excise Invoice, GL entry not revers

Hi Expert,
Reverse accounting entry not generated for canceled excise invoiceRegards
BK GAIKWAD
M9881908615

Sir,
my problem is when we have canceled the Excise Invoice Payble duty GL not revers.
Regards
BK GAIKWAD

Accounting not cleared for cancellation invoice

Hello,
I had cancelled a Invoice whose accounting was cleared but no accounting document is generated for the cancellation invoice.
I tried resetting the accounting document of the original invoice but that also dint work.
Right now the status is the Cancellation document is in open status.
Kindly help in generating accounting for cancelled invoice.
Regards,
Apoorv

Hi Apoorv
As accounting document is not generated after cancelling the invoice,so check the revenue account determination configuration.Check wheather cancel billing document type has been assigned to the account determination procedure.
Regards
Srinath

While "Invoice Cancelling- Accounting entry not effected in Trial balance"

Dear All,
Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
I can able to see the Reversal Entry in Payables > Reports > View Accounting A
Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
@Have to Resolve this as soon as possilble, plz any one can lets guide me
Reagrds,
senthil

Plz Update this asap.....

Accounting entries are not reversed

Dear Sir/Madam,
We have canceled an excise invoice through transaction code J1IS. The
excise invoice was for other movements and created in J1IS only. The
excise entries were canceled but the accounting entries are not canceledafter the cancellation.
how to cancel the accounting entries and why the accounting entries are
not canceled after cancellation of excise invoice.
regards
Ashish

Hello Ashish,
Cancellation of part 2 (FI) has to be done through J1IH > Cancel EI.
If you have run in J1IS, then you have to reverse the FI document in FB08.
With Best Regards,
Gladys Xing

Service entry Sheet was reversed after the invoice as posted and rebooked

Hi..
Service entry sheet was reversed after the invoice as posted and rebooked with final entry marked. The rebook transaction created a different $ amount than the original SES. The difference between the 2 amounts is causing a GRIR out of balance on the PO. MR11 does not indicate a GRIR out of balance.
why did SES rebook a different value?
How can we clean up the GRIR out of balance?
Please help...
Mercy

This is a standard SAP procedure.
SAP Note 440942 is helpful to sort this out.
Thanks,
Mercy

Content query web part is not working after chaning the DNS entry

Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

Excise duty not reversed even after Excise Invoice is reversed

Hi Experts,
Please give me solution for excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is reflected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
The cancell invoice should not appear for duty payment statement in the J2IUN.
Rgds
Shailesh W

Hello Sir,
I will provide u further details for this Issue.
This is to inform you that excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap & fresh Inv no 1000200214 dt. 06.09.10 is prepared .We have noticed that in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is refected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
As per our understanding,the cancell invoice should not appear for duty payment statement in the J2IUN.
You are requested to check the same at your end and let us know the reason for the same.
We are post the excise document in month of april 10 vid doc. no.10000021 dt. 02.04.10 7 10000057 dt. 10/04/10 and same is reversed vide do. no 1000074 dt. 02/04/10 & 25000003 .
While arriving the duty payble amount, we are found following discrepancy in J2IUN (Z-Report) & FBL3N (G.L) Account
Duty payble fig. As per J2IUN Rs. 9482.00 (Basic)
Duty Payable Fig. As per FBL3N Rs. 7247.00 (Basic)
Diff. Rs. 2235.00
The diff. due to reversal of excise posting document not a/cted in J2IUN Report.
Rgds
Shailesh W

Cancelling the GR the excise item tab is not coming after flagging the OK

Hi SAP Experts,
there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
But while cancelling the GR the excise item tab is not coming after flagging the OK.
This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
Thanks & Regards,
Anisha Sinha

still not cleared

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
tt2

PI entry not reverse after canceled GR

Similar Messages

Maybe you are looking for