PI picking up File still processing

I hae a straight forward file adapter picking up from a SAP server set to be every 30 mins. However sometimes it takes longer to create the file...it opens the file on the server as it still writing to it when PI picks it up.
This means it is incomplete and so a bad file goes across.
I have tried using the retry and poll interval but they dont seem to achieving my aim.
I am on PI 7.1
How do I get PI to do something like look and find a file, and then wait and check 60 seconds later to see if file same size, if not wait another 60 secs and check again etc ?
Thanks

Hi brian
see completly at the bottom of this help (in PI 7.0) for the parameter name "Msecs to Wait Before Modification Check": [http://help.sap.com/saphelp_nw70/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm]
but for PI 7.1, it seems the info disappear: http://help.sap.com/saphelp_nwpi71/helpdata/en/44/682bcd7f2a6d12e10000000a1553f6/content.htm
fro PI 7.1, search with term "Advanced Mode" in SDN.
regards.
Mickael

Similar Messages

File Adapter Not picking the files

Hi All,
We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
Any idea why the files that are dazzled with the same name are not being picked up.
Thanks in Advance...!!

Hi,
While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
"Includes files with name pattern" "Excludes file with name pattern" file name..
let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
cross check the schema element of the file pattern.

Pick the file with dynamic name

Dear All
My scenario is file to idoc.
legacy system generates file with a file name as current date.txt which keeps on changing
eg:   on 9th july file name is 09072009.txt and
       on 10thjuly filename would be 10072009.txt
How do i pick such file and process it?
What should be the File Name in the sender communication channel?
Please help me in resolving this issue
Thanks
Bhasker

Hello Baskar Raj,
    Your requierement can be acheived by using the combination of UDF and ASMA(AdapterSpecifieMessageAttriburrtes) which helps us greatly in meeting dynamic filename rquirements.
1.You have to enable either FIlename,Time stamp or all the he ASMA in the sender side communication channel .
2.Write the UDF that gets the file name (CURRENT DATE.txt)during runtime that is available from enabling ASMA in sender communication channel .
3.change it to the name u want to modify (Replace with the new file name by getting time stamp from the ASMA attributes.
4. Map the UDF output to any of the target nodes(can be messagetype node MT_ur msg type name).
5.Enable ASMA on the target side also in that chek same file name.
Code to be writen in UDF is mentioned by sunilchandra in the below thread u jus need to avoid filename in that and use only date format it will acheive ur requrement.
Re: Regarding Target File name
Thanks,
Ram.

Restricitng XI to pick fixed number of files for processing

We get close to 4000 files for XI to process(file to File scenario)
We want XI to pick 500 at a time for processing..
How do can we restrict the number files picked at a time
.I increased the polling time form 60 secs to 5 mts..still it picks all files at a time causing the Java stack to crash
Points will be awarded

Hi
I don't think there is a standard option in the file adapter to control the no of picked files .
Using bpm also won't help.
May be you can use a temperory file name.
Before the file pick run an OS script which will rename only 500 files at a time..so that it can be picked by the file adapter.
run the script using 'Run OS cmd' option before file processing.
rgds
Arun

BPM was Picking two files but it was not processing 2nd file data in target

Hi all,
I have designed scenario for picking two files and i want to merge this files into single structure and send it target.when i am try to testing my bpm was picking two files but it is processing only file it went target system.i have steructe for source like
source1     target
root        header
a           item 0 to unbounded
b            a
c            b
             c
source2     item1 duplicated structure
a            a
b            b
c            c
i am getting two source files with the same structure but i have to map it one target structure and i want to map both source fileds to one target structre under item node so i was duplicated item node and mapped a b c fields from both(2 source structures).while testing BPM is picking two file bu in the target i am getting only first file data under item node,whatever i mapped with duplicate structure with second file i am not getting into target file(target is standard proxy structure so cant' create new one item node in that occurance is 0 to unbounded thats y i duplicated node while testing interface mapping its working fine).can anyone suggest solution for this problem.
Thanks,
Seshagiri.

Hi,
In BPM follow the below steps and hopefully your problem will be solved.
1.     Configure one sender CC to get the files from your application server, once the files hit the BPM now you need to
                     configure your BPM accordingly.
2.     Use the Receiver step in BPM to receive the messages. Use the correlation step to get the correct files.
3.     Use container and append the files, so both the files will be append, this means the message content will
                     have 1header, body, footer, 2header, body, footer.
4.     If you want to split the message to different receiver then use the fork step else leave it.
5.     Use the transformation step, the transformation step will call the message mapping. Provide the correct message
                     mapping.
6.     Now use the sender step to send the message to the receiver-target system. In this step use the split value for each
                      concept if you want to generate two different files.
7.     Configure 1 receiver CC to generate both the files.
Hope this helps.
Cheers,
Jay

PI shouldnt pick the 2nd file unless the first file is processed completly

Hello All,
If my Polling interval for the File Adapter configured is 60 sec ....and many files would be placed in the server rapidly. My requirement is that the PI should not pick the second file unless the first file is processed completely ( when the first file takes more than 60 sec to get processed) .Is there any other option apart from increasing the Polling interval time?
Thanks and regards,
Pavithra

Hi Pavitra,
I think requirement specified cannot be achieved. When the poll interval is specified, adapter would pick up all the files in the directory path.
I hope it is better to have the Quality of Service in Processing parameters to be as "Exactly once in order". This will process the messages, but if any of the messages get failed then the remaining messages will be in the queue.
Thanks,

Flat File automation process - limitations

Hello Everyone,
I would really appreciate any insight on the process improvement suggestions.
Background:
Currently we have around 12 territories providing a new flat file with new data on a daily basis depending on the business activity. Which would also mean that, on a given day if there is no activity would mean no flat file provided to BI for loading process.
The flat files provided need to be loaded into the BI system (PSA - DSO - InfoCube).
The flat file loading process has been automated for the daily file by implementing the logical file name for each territory.
1. The process variant in the process chain is to ensure if the flat file is available on the App server (Custom ABAP program).
2. 12 InfoPackages have been created to pick the data from the flat file on the app server and load the data over into the PSA.
3. All the InfoPackages merge into an "AND" event in the process chain before the DTP load into the DSO kicks off.
4. DSO Activation
5. Recon between the flat file and the DSO to ensure all the data from flat file has been loaded into the DSO.
6. DTP loads into the InfoCube.
7. Recon between the InfoCube and the DSO itself.
8. Moving the flat file from one folder into another.
All the above processes are automatically performed without any issues if the flat file is available on the server.
Problem / Issue:
As one of the major limitations of the above design is the flat file for sure needs to be made available on the app server in order for the whole data flow in the process chain to continue without any breakpoints.
Current workaround / process improvement in place:
Based on the above limitation and upon further research, I was able to apply the OSS Note to give us the option of maintaining multiple DTPs for the same data target with different filter values.
So, even if have individual data stream for each territory with a different DTP the issue still remains where the process variant (ABAP program to check if file exists) or the InfoPackage load if the ABAP program is removed will fail.
Which means due to the above fact, the support team is alerted about the process chain failure.
Question / Suggestions required:
The main questions or any suggestions would be welcome, if one of you can let us know an approach where the flat file check program doesn't have to give a hard failure in the process chain for the rest of the process chain to continue with the loading process. (As in order for the rest of the process chain to continue the only options we have are Error, Success, Always).
I have also looked into the Decision process variant available in the process chain, but based on the options available within I cannot utilize it for the loading process.
Error can be caused by generating an error message in the ABAP program which in turn is causing the issue of alert being sent over even if the rest of the process chain finishes.
Success would mean the flat file needs to be available. Always cannot be used in this case as it will cause a failure at the InfoPackage level.
If the InfoPackage load can be avoided without a hard error to be generated, the process chain does not have to remain in the failed state which in turn will not trigger any alert to the support team.
Please do let me know if you need more details about the above process improvement question.
Thanks
Dharma.

The main issue with this as you mentioned is that the file has to be available for sure.
We had a similar issue - we had a very critical data load that had to happen everyday , failure of the file getting loaded would mean that the reports for the day would be delayed.
We were running on UNIX and we implemented a simple UNIX command that would not complete till the file was available in the app server.
Something like
while ( the file does not exist )
delay of 15 seconds
you will come out of the while only after the while completes which means that the file becomes available.
You can write a similar ABAp program to check file availability if required and put it into your program.
we also had a failover process where we created a zero byte file with the same name if the file did not come beyond a certain number of tries and the PSA would load zero records and the data load will continue.
Edited by: Arun Varadarajan on Jan 26, 2009 10:18 AM

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

File(FTP) Adapter doesn't pick any file from FTP server

Hi All,
This is a strange problem. I am trying to pick all the file from a FTP server using File Name: . . But the file adapter doesn't pick any file from the directory. When I change it to a specific file name eg. ABC.txt then it picks up the file ABC.txt only.
My requirement is to pick up all files in the directory and I just do not seem to understand what is wrong. I have used this wildcard option several times earlier and it always worked fine. But in this case, this does not work.
I changed the FTP server to point to an internal FTP server and it works fine.
I have checked all my parameters and everything looks okay. Like I mentioned earlier, if you specify exact file name, it picks up the file.
Any guess as to what is going on here?

Transport Protocol: FTP
Message Protocol: File
source directory: /test or test ( either one works)
file name: * or . or *.txt nothing works
server: ftp server name
port: 21
data connection: passive
user: ******
pass: ******
connect mode: permanently
transfer mode: text
QOS: exactly once
poll: 10 secs
processing mode: archive ( changed to test and delete as well, but made no difference.)
archive dir: dir path
file type: text
adapter specific attributes:
checked: set adapter specific attributes
and file name.
status: active.

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Pick up Files based on Timestamp???.

HI All,
Is it possible to pick up the files in the order of which they are put in a shared folder ?.
Our client system will put the xml files in a shared folder with timestamps..PI will pick these files one by one..but if the PI server is down.. the files will keep coming in the shared folder from the client system..and when PI come back up they need to be picked in the order in which they have been put according to timestamp.
I'am using the NFS functionality.
I dont want to output files from PI based on timestamp added.. I want to pick files up based upon sender timestamp.
Is this funcationality supported in PI?.
Thanks.

HI
You can write script to do this. Script can copy files based on time stamp from the folder where client system is putting the file to the folder PI is poling based on timestamp.
With this as Ratan said. If the file creation date for file system is in date and time format(timestamp) File processing sequence by Date can help. It process file starting from oldest file.
Thanks
Gaurav

I have a song on my ipod touch I can't get rid of. Even if I uncheck the artist and re-sync the file still is showing. It has a weird circle with a stop icon next to the file.

I also tried to manually manage the music files and removed them all from my ipod. But the file still remains. It only is appearing on my ipod touch, it does not show in itunes. And when I add the file that shows in itunes, it shows up twice. One is normal and the other has that stop button icon next to it. Please help.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

Error in picking the file from folder

If I have 100 files in a folder, if XI comes and picking the files from the folder, while picking 50 files connection was lost in between and they are remaining 50 files are there to pick, in this scenario what happens after connection established XI will collect remaining 50 files or again it starts from first.
Can anyone answer this question with explanation.

This depends on what you have configure in
Processing parameters for File Sender communication channel:
Processing mode:
1. Archive : if you have set processing Mode as Archive then after reading the file, PI will transfer the file to Archive dir mentioned and will not consider in future for reading.
2. Delete : if you have set processing Mode as Delete, Then after reading the file PI will delete the file from FTP.
3. Test : If you have set processing Mode as Test ,then PI will keep the file as it is after reading so it will read the same file in future.
Thanks
Bhupesh

Is CPA Cache refresh linked with ftp or file pooling process in XI?

Hi,
I have a file to file scenario using Transport protocol as FTP in XI 3.0 SP 15.
When we try to sends some file using ftp protocol where we are using
FTP connection parameters
Server = <CORRECT IP>,
Port = 21 ,
User name <CORRECT NAME>,
Password <PASSWORD> ,
Data Connection = Active
Connection Seq = None
Connection Mode = Permanently
Transfer Mode = Text
Processing Parameters
Quality of Service = Exactly Once
Pooling Interval = 1 sec
Processing Mode = delete
File Type = Text
File encoding = utf-8
The problem we are facing like some time the ftp is not working even the file is present in the location for pick up. If few files are stacked up to be collected then when we are using CPA Cache refresh in Full mode manually then it fetches all the files from the location but the problem is that ,we have a time constraint for this process to be completed in just 60 seconds if we are not able to pick up a file in 60 Secs then the file will be treated as invalid.
So I just want to know how Manual CPA CACHE refresh in full mode generally solve the problem.
Next if more files will be stacked up then cache refresh also failed to solve the problem and more cache refresh result in NOT pooling any other files in XI including the above discussed flow.
So,in anyway Cache refresh linked with ftp or file pooling process in XI?
Please assist me in correctly understating the whole problem and what solution could be put to solve this.
Thanks,
Satya
Edited by: Satya Jethy on Mar 14, 2008 12:28 PM

Hi Suraj,
If you see my query i have mentioned that the pooling interval is 1 Second.
If we are not able to pick the file with in 60 Secs as this is a real time scenario so the file will be treated as a invalid file.
Moreover this problem is happening some time.
I have also checked the component monitoring it is saying everything is ok as because we are receiving the file with out any error and the file transfer is also success.The only problem is that it is not collecting the files from the given location.
Hope i make you understnad the problem .If not please revert back i will try to explain once again.
Thanks,
Satya

B2b unable to pick the file from xml gateway

Hi All,
I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
Still its unable to pick the files from xml gateway.
Clarify my understanding please
While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
Here i am attaching the logs:
2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
file.receiver.wallet_password = *****
file.receiver.polling_interval = 5
file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
file.receiver.marker = false
marker = false
ccc = false
file.receiver.channel_mask = None
file.receiver.minimum_age = 0
filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
file.receiver.van = false
file.sender.channel_mask = None
file.receiver.user = eiced1
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
file.receiver.preserve_filename = false
transport_callout_waittime = 30
preserve_filename = false
file.receiver.ccc = false
van = false
polling_interval = 5
2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
regards
cnu

Anuj,
The log which i placed on top, thats the complete log and DC log is given below
2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

PI picking up File still processing

Similar Messages

Maybe you are looking for