Pick data in small batches

Hi,
We have a requirement where we need to pick up only a few files (say 100) from a folder with many more files parked in it.
We intend to run a .bat file, which resides in the FTP server itself. The .bat file is supposed to rename the files to a particular name which will be picked up by a Sender File Channel.
We tried using the "Run Operating System Command before Message Processing" but of no avail.
We are using:
Transport Protocol : FTP
Mesage Protocol : File
From SDN, we came to know that we cannot run a batch program using the above option. Please confirm.
Also, please help us with some alternative design, if reqd.
(We are using PI 7.1)
Thanks!!

>
Vik_ram wrote:
> Hi,
>
> We have a requirement where we need to pick up only a few files (say 100) from a folder with many more files parked in it.
>
> We intend to run a .bat file, which resides in the FTP server itself. The .bat file is supposed to rename the files to a particular name which will be picked up by a Sender File Channel.
>
> We tried using the "Run Operating System Command before Message Processing" but of no avail.
>
> We are using:
> Transport Protocol : FTP
> Mesage Protocol : File
>
> From SDN, we came to know that we cannot run a batch program using the above option. Please confirm.
>
> Also, please help us with some alternative design, if reqd.
>
> (We are using PI 7.1)
>
> Thanks!!
You can use a Unix shell to do this.

Similar Messages

Import large batches of WMA slow... Smaller batches, faster. What gives?

If I try to import more than like 20-30 unprotected WMAs into iTunes, the conversion is god awful slow. If I do them in smaller batches, it flies.
What's the deal? Bug in iTunes?

Hi VijayaKumar.
Import Server(MDIS) is best for importing Mass or Bulk Data. Please verify this on Page 246/403 of MDM Console Reference Guide. Table 63. Conceptual Differences Between Import Manager and MDIS
http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/71608566ae3260e10000000a42189b/MDMConsole71.pdf
Maximum import file size Limited (50,000 records) for IM Unlimited for MDIS
I think you need to make use of Import sleep time and Import Slice Size parameters for MDM Optimized Performance.
How to configure these Parameters for this Please refer below thread:
how to configure import slice and import sleep time in MDIS ?
Also please refer, Table 59. Optional MDM Server Parameters of MDM Console Reference Guide:
parameters like: Bulk Import Silo Page 226-227/403
Hope it helps..
Regards,
Mandeep Saini

TS1501 transferring a small batch of photos from the new ipad to macbook pro (this way you can upload one album at a time, file them into a new album on macbook pro) Pls. advise.

How can I transfer a small batch of photos from the new ipad to macbook pro? In theory, I should be able to keep my albums together this way (once uploaded to macbook pro, i can easily file them into a new album on macbook pro.) Not working for me! Macbook pro does include iphoto. I had no problem uploading ALL photos (3 or 4,000.) Help! Goal is to keep albums together.

Hi all,
Goal: Backing up photos!
Hope: Transfer ALBUMS from ipad to external drive (via macbook pro)
Is this possible? Or will I have to create a file name for each of my thousands of photos?
UGH!
HELP!
Lee

Performace tuning: how to pass data between different batch job programs?

Hi everyone,
    now i have one problem about performance tuning using threading in SAP programs: split one big program into two programs - one is main program and the other is sub program. using batch jobs, we can submit multi jobs of sub program at the same time.
    does anybody know how to pass data between different batch jobs? I don't want to use temp files. can ABAP memory can implement this?
    thanks!

Wei,
Yes we can transfer the data by using
SAP Memory OR ABAP Memory.
Ex: V_count TYPE i.
V_count = 100.
LOOP AT itab.
IF v_count EQ 25.
Here For every batch job
EXPORT data TO MEMORY ID 'ABC'
   Function module
    JOB_OPEN
   JOB_SUBMIT
   JOB_CLOSE.
ENDIF.
ENDLOOP .
IN your 2nd program.
INITIALIZATION.
IMPORT data FROM MEMORY IF 'ABC'.
FREE memory if .---When you free the memory you will get recent data.
Don't forget to reward if useful.

SAP threading-how to pass data between different batch job programs?

Hi everyone,
    now i have one problem about performance tuning using threading in SAP programs: split one big program into two programs - one is main program and the other is sub program. using batch jobs, we can submit multi jobs of sub program at the same time.
    does anybody know how to pass data between different batch jobs? I don't want to use temp files. can ABAP memory can implement this?
    thanks!

Passing Data Between Programs
[http://help.sap.com/saphelp_47x200/helpdata/en/9f/db9df735c111d1829f0000e829fbfe/frameset.htm|http://help.sap.com/saphelp_47x200/helpdata/en/9f/db9df735c111d1829f0000e829fbfe/frameset.htm]

Pick Data From Serial/USB ports

How can I pick Data from Serial/USB ports Machines
I want to put Results into Database from Haematology Machine

You will have to write a Java program to do this and then use a Java Pluggin Commponent (JPC) to read the data into Forms.
Look on the Internet for code showing how to work with USB ports, and see Francois web site about PJCs.
http://sheikyerbouti.developpez.com/index_en/

Query picking data for the running request

Hi Guyz,
Am working on BW 3.5,
We run a query on a Multicube on daily basis, the scenario here is when we ran a query during one of the infocube load which was not activated and not ready for reporting (Request for reporting available symbol is missing), even then the query picked data for the request which was still running.
Cheers!
Ravi
Edited by: Ravi Srinivas on Aug 18, 2009 1:20 PM

Good to know that your doubts are cleared...
For more information browse through SDN and have a look at these notes:
Note 411725 - Questions regarding transactional InfoCubes
Note 1063466 - Transactional request is not set to qualok
Hope it helps...
Regards,
Ashish

Any standard transaction code to check Batch Creation Date of a batch?

Please let me know if you know any transaction to check batch creation date of a batch , preferably with valuation information.

Hi
You can try with MB5B. It wont give batch creation date, but it will give posting date (most of the cases posting date may be batch creation date)
Otherwise you can try to pull the information at table level MCHA-ERSDA and develop query.
regards
Srinivas

Sender Comunication Channel Should Pick Data from 3 Folders.......

Hi Experts,
Iam doing File-xi-File senario in which sender Adapter have to pick data from three different folders.How should i give the path in comunication channel,how to do this senario.
Regards,
Kumar

if it is multiple directories then use <i>Advanced Selection for Source File</i> feature - http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Else in case it is multiple files ref - http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm

Change Picking data, then call Delivery Note and Invoice in the background

I have designed a GUI where the picking data (from table LIPS) is changed. Now my SD consultant wants the program, when a SAVE or CONTINUE button is clicked, to do the Delivery Note and Invoice in the background.
To quote:
Your progrm must change the values in the delivery in txn VL02n, when the delivery is saved it updates LIKP and LIPS amongst othr tables. When the invoice / billing doc is created it is done with ref to the delivery. Billing doc created using txn VF01, the main tables of the billing doc are VBRK (header) and VBRP (item). And for completion sake, tables VBAK and VBAP are the sales order tables!
In my PAI module, how do I do the calling of these two functions?
The consultant suggested I use a BDC. Why can't I use Call Transaction.... ? What is the best way to do this?
At the moment, my SAVE button updates an internal table of LIPS, and for test purposes it exits to List Processing to test if the amounts changed correctly.
Hope someone can help.

Hi
Ok.
Do you mean "Accual GI Date" in Item overview ?
I have performed a test. When I check "Goods Issue delivery" indeed it has posting date in the past.
Now for the invoice:
I set
"Billing date"
"Serv. rendered" date
and "Prining date" in the past.
Would it be enough to post everything in the last month ?
regards
Rafal

Next inspection date in the Batch Determination Screen

Hi Gurus,
I am having problems with some user requirements because I am an abaper and I think this needs some SD expertice. Users want to see the "Next inspection date" of the batch (field QNDAT) when they do the batch determination of a delivery (Batch Split --> Batch determination). They want to see a new column in the screen, right next to the "Characteristic sort" field. I think that to put a new column in that standard screen is not possible. So I suggest to change the contents of the existing characteristic sort. And there is where I do not know how to do that. It is possible at all to have the next inspection date as a characteristic of the batch and then use it to sort?
Any help would be really appreciated.
Regards.

Hi,
Yes you can use next inspection date as a characteristics and sort the batches based on that.
Inform the user to add this characteristics (LOBM_QNDAT) in the material batch class and batch selection class using transaction code CL02.
Then in SPRO, using transaction code CU71, in the sort rule add this field as characteristics (LOBM_QNDAT).By this way the system will sort the batches based on next inspection date as parameter.
Note that the user needs to fill-in the next inspection date in all the batches in order for the sort rule to work properly.
Regards,

Add the " expired date" in the batch determination

Dear Guru
we are to do the batch determination in the sales order,
I want to know is it possible to add the " expired date" in the "batch determination" ?
Thanks.

If you want to add the Expiry Date then you can maintain the same in Batch Characteristics as Expired Date while creation of Batch.
Also maintain in the Material Master Record > Plant Date / Storage 1 > Shelf Life Data - Min. Rem. Shelf Life & Total Shelf Life.
Best Regards,
Ankur

Picking process in OPM Batch

Hi Team,
To set the Bulk picking process to happen for created batches and when executed no batch order number is getting defaulted for selecting it.
Kindly let me know is there any set up missed for this feature.
Regards,
PAM

Could you please explain me what steps need to be done for picking process in OPM batch?

Update Picking date, Loading date, Planned GI date etc on outbound delivery

Hi All,
I'm a bit stuck. I'm trying to perform some updates against outbound delivery documents, at the header level, from within a user exit of a shipment document.
Essentially, based on some logic and data on the shipment I need to apply some changes to the header dates on LIKP for the deliveries attached to the shipment. I've looked at BAPI_OUTB_DELIVERY_CHANGE but this does not allow me to change the fields I need to.
So, does anyone know how I can update the following fields on LIKP:-
Picking date - LIKP-KODAT
Picking time - LIKP-KOUHR
Loading date - LIKP-LDDAT
Loading time - LIKP-LDUHR
Planned GI date - LIKP-WADAT
Planned GI time - LIKP-WAUHR
Delivery date - LIKP-LFDAT
Delivery time - LIKP-LFUHR
I'm not sure I can acutally do this or whether it is advisable to do so but have been asked to make it work!
Thanks in advance,
Gareth.

>
Kshamatha Eda wrote:
> Why not pass the values in EXTENSION1 and implement BADI: SMOD_V50B0001 and pass the values in to the header in method EXIT_SAPLV50I_010 and see if it works. If i am not mistaken this should probably hit only when EXTENSION1 is populated in the BAPI.
Hi,
Thank you very much for the suggestion - I'll give this a try and see how I get on. I was hoping there may be something like this but couldn't find a way of doing it and haven't really done much in this area before.
Thanks
Gareth.

How to generate a list of pick dates for all scheduled deliveries?

Hi!
How to generate a list of pick dates for all scheduled deliveries?
What all the tables involved?
Thanks
Imran.

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

Pick data in small batches

Similar Messages

Maybe you are looking for