Picking is not Possible

Hi,
while doing Picking the system is showing the error messege "No items that are to be picked were found". Message no. L3124.
What could be the possible reason?
Regards
Debasish

Dear Debashish,
Check, whicever is relevant:
[Picking-|error : No items that are to be picked were found]
[Picking|No items to be picked were found]
[Picking-|No items that are to picked were found]
Best Reagrds,
Amit.
Note: Alternatively,
[Search Forum|https://www.sdn.sap.com/irj/scn/forumsearch]

Similar Messages

  • Not Possible to determine condition type- supplementry condition STO sch ag

    Dear All ,
    While creating the stock transfer scheduling agreement in the transaction ME37, Stock transfer pricing schema is getting is picked up. where the standard condition type :P101 is being used for picking the Material valuation price of the supplying plant.
    Now for adding the delivery cost or any other conditions , while we are trying to enter  other conditions in the Item Conditions in ME37, system is giving an error message "NOT POSSIBLE TO DETERMINE THE CONDITION TYPE".
    As NO Access sequence is attached to the condition type : P101, and at the same time, Supplementry pricing procedure is assigned to the condition type : P101.
    When we assign the access sequence(e.g 0002) to the conditon type P101 , then system allows us to give the supplementry conditons while creating the scheduling agreement , BUT at the same time material valuation price from supplying plant  is not getting picked up in either scheduling agreement or stock transfer order.
    Requirement is that BOTH material valuation price as well as system allows us to give the supplementry conditions in the scheduling agreeement.
    Thanks & Regards
    Nitin Chhabra

    .

  • Goods receipt not possible for delivery 800001597: error code 4

    Hi,
    When doing goods recipt for outbound delivery in MIGO, I am getting the below message:
    Goods receipt not possible for delivery 800001597: error code 4
    When going in details of error messgae:
    For error 4 : Check the delivery and its document .
    Document flow is as below:
    Step 1. PO Created
            2. Delivery created with ref to PO
            3.Picking
            4. Shipment Created
            5. Goods Issue complete.
    Now what i have to check.
    Thanks in advance.
    Regards

    Check the link Re: MIGO
    Also check OSS Note 458770 - GR for outbound delivery shipping units with batch split and Note 314765 - M7865 during GR f. delivery w/ default values 102 if it applies to your SAP version.
    Regards

  • Goods receipt not possible for delivery 800015869: error code 1

    Dear friends,
    I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
    Goods receipt not possible for delivery 800015869: error code 1
    Message no. M7865
    Diagnosis
    The goods receipt for the delivery cannot be posted.
    The error according to the error code:
    1. The delivery does not exist.
    2. The delivery type is unknown.
    3. The delivery is not goods issue posted.
    4. There are no delivery items.
    5. The receiving plant could not be determined.
    6. The delivery items have already been goods receipt posted or contain zero quantities.
    7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
    8. It is not currently possible to block the delivery.
    Procedure
    Error code 1      : Check your entry.
    Error code 2,3,4,6: Check the delivery and its document flow.
    Error code 5      : The delivery must be related to a purchase order or
                        the customer must be a retail business.
    Error code 7      : Check the settins for your movement types.
    Any poniters to check the setting in PO or delivery or any setting in SPRO.
    Regards
    Ashutosh

    Hi Anupam,
    That is the requirement of my scenario
    That is happening in intercompany posting.
    I am explaining to you.
    say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
    I have two company codes X and Y
    One DC (A) belongs to X and second store (B) belongs to Y.
    I have stock available for say article ( am working here in IS Retail  instead of material ) in both DC --A and Store --B.
    Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
    Now I did delivery thru VL10B and then picking and then PGI.
    Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
    So now total stock in DC=400
    Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
    Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
    and stock of receivibg store (B) will increase by 100 nos.
    But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
    But there is another stock in transit available=50
    Now why GR is not happening against delivery but it is happening against PO???
    Any pointers

  • I downloaded the 09 version without deleting the 0, and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible !

    I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?

    Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)

  • Shipping in shipping point from plant and storage location is not possible

    Dear Experts,
    i am trying to configure STO with delivery scenario in my company
    after creating PO (sto UB) and delivery through vl10b when i try to do picking in vl02n and when i enter storage location its giving error
    "shipping in shipping pointxx from plant xxxxand storage location xxxx is not possible"
    i ve checked all settings
    1.plant and sh point assignment
    2. ovl2 sh point determination
    3.ovl3 picking location determination
    4 all master data cust n mat for loading group and shipping cond
    not able to find any solutions plz help
    Regards
    Supriya

    Check your entries in following options in SPRO path:
    IMG - MM - Purchasing - Purchase Order - Set Up Stock Transport Order - Setup Stock Transfer b/w Storage Location - Setup Storage-Location-Specific Shipping Point Determination
    Option 1: Define Rule for Determination of Shipping Point
    Option 2: Assign Shipping Points According to Storage Location (this should be there, if in Option 1 Determin. Rule; Shipping Point is L: Storage-Location-Specific Shipping Point )
    Regards
    JP

  • LT41 - Group TR - Not possible to mark items (bug?)

    Hi,
    transaction LT41 can be used to group together TR under one group number. This can later be used to create TOs, print TOs and confirm TOs for this group number.
    When calling LT41 I can see the open TRs sorted by movement type. But I cannot select any items, "Select all" does not work and the column "Selectd" is not ready for input.
    Transaction LT43 (group deliveries) works fine. I have the same problem while testing on the IDES system (ECC5).
    I could not find any notes related to this topic.
    Cheers
    Mathias

    Not a bug, it is just not possible to select TR if transfer type is "*". This makes sense as it is only possible to create TO for a specific transfer type.
    If only one of the following is selected for the transfer type everything works fine.
    A     Pick
    E     Putaway
    U     Posting chge
    X     Whse superv.

  • Document Contains Errors. Approval is not Possible.

    I have a SC approval that errored out when coming back to SRM. We run RBBP_OFFLINE_EVAL program periodically throughout the day to pick up offline approvals from users. In the spool list, I see this message:
    Document Contains Errors. Approval is not Possible. And the system gives me the WI ID, SC # and the object type BUS2121.
    I've never seen such an error before. The document here...is it referring to the approval email itself? We instruct our users to not edit the approval email in any way. They just have to click on the approval link and click on Send in Outlook. I don't know if the document it's referring to is the SC or the approval email.
    Can anyone help?
    SN

    Hi,
    You are right. This error is the issue. To answer your other question why this message was not raised earlier;the problem could be that at the time of sc creation, there might be sufficient budget. But because your shopping cart was in approval for some time, it is possible that some more shopping carts have been raised with the same WBS and got approved. This would reduce the overall budget available. When the shopping cart is approved, one more check is done by the system and this time there was no sufficient budget.Hence the error is displayed. Only option for you now would be to ask FI people to increase budget or resubmit the cart by changing the value of the shopping cart.
    Regards,
    Sanjeev

  • Restart not possible (Xml message)

    Hi All,
    I am facing the following error in SXMB_MONI , restart is not possible & unable to check the payload.
    can any one please let me know what is the cause for it & how to resolve it.
    INTEGRATION_SERVER_PIP  - -
    Sender Component     
    urn:wssprocessorWsd/wssprocessorVi/document -
    sender name space     
    wssprocessorVi_Document----
    Sender Interface                         
    "Current Status"----
    >Version     
    Synchronous----
    >Type
    BE -
    >QOS          
    PROXY----
    Outbound Proxy
    & The Receiver components are Blank.
    Message Status is System Error RESTART NOT POSSIBLE(RED colour Round Button)

    Have you configured Receiver Determination with the appropriate target system and interfaces?  Looks like your target system is down or connectivity errror...
    Go to SXMB_MONI and pick that message and navigate pipeline steps and see where it fails.. Also the steps it fails you check the payload or response mesg and you will see the details of error.
    Also go to RWB and check your communication channel monitoring  area. See any help you get.
    Also go to RWB and go to message monitoring. See the inbound side of the interface and see what is the reason for the error.. Sometime if the receiver comm channel or target system has issue you mesg stop.
    Check SMQ1 and SMQ2 and see any locks for those mesgs. If so remove locks and activate again.

  • Not possible to determine  consumption account

    Hello Gurus
    Goodmorning  everybody
    The  error  issue:
    when i try to  create  sales order with third party  item  , getting some error " not possible to  determine  consumption account".
    and  i tried to  assign in OBYC   with      0001, GBB,  Trading  account G/L , Debit ,  Credi  A/c  still the problem persists.looking for some  inputs
    Thank you  inadvance
    regards
    venkat

    Hi
    You said initially the error Not possible to determine  consumption account has got corrected with my initial suggestion
    But PR has not got created
    Now you are telling that the error  Not possible to determine  consumption account is still on
    I am now confused about what is your error because based on the error only soln can be given
    Now i assume that error  Not possible to determine  consumption account is still on with all schedule line category settings correctly maintained
    Then do this
    IMG-Materials ManagementPurchasing-Account Assignment----Maintain Account Assignment Categories
    Here choose X and go to its details and make sure that following values are maintained
    1.Consumption posting as V
    2.Account modification as VAX (these are standard settings)
    Now in OMWD check what is the grouping code maintained against your plant say 0001 or 0002 like that
    We will take 0001
    Check the valuation class maintained for your material in MMR accounting view like 3100 or 3200 etc
    We will take 3100
    Now in OBYC double click GBB give your chart of accounts and then enter
    Then for the combination 0001-VAX-3100 maintain necessary debit and credit accounts
    This account gets picked as consumption account in the PR which is getting generated
    I have run this scenario now and able to create a PR without any problem upon saving the sales order
    All the best and keep me posted of the outcome
    Regards
    Raja

  • Java Proxies : Restart not possible

    Hi,
    While trying java proxy scenario i am getting the error in moni.
    Restart not possible...also i can see two messages one with Sender (Sending system),receiver (Receiver system)...the other message reverse of it Sender is receiver sys and receiver is sender system.Not able to understand why...
    Help is appreciated
    Regards

    Have you configured Receiver Determination with the appropriate target system and interfaces?  Looks like your target system is down or connectivity errror...
    Go to SXMB_MONI and pick that message and navigate pipeline steps and see where it fails.. Also the steps it fails you check the payload or response mesg and you will see the details of error.
    Also go to RWB and check your communication channel monitoring  area. See any help you get.
    Also go to RWB and go to message monitoring. See the inbound side of the interface and see what is the reason for the error.. Sometime if the receiver comm channel or target system has issue you mesg stop.
    Check SMQ1 and SMQ2 and see any locks for those mesgs. If so remove locks and activate again.

  • Account determination for entry PRD not possible

    Hi All,
    In exsiting PO line, we did two goods receipt, and we tried to invoice the vendor based on the goods receipt. The wearid thing is only one goods receipt got invoiced, the other gives error message saying: " account determination for entry PRD not possible ".
    I checked with finance team, they said we intentionally didn't set up the account for price difference. And if one GR can be invoiced and goes to correct accout, the other one should be able to invoice as well, when I simulate the entry, the vendor account didn't get picked up, I think that's the key of this problem.
    why the vendor account didn't get picked up by the system? please advise if you have any thoughts, I appreciated.

    Nancy,
    This is the restriction with materials managed in moving average price. I'm guessing that the user has performed goods issue between GR and IR on the second material. If you'd like to keep the current config setting, you will need to reverse the GI transaction, post the invoice, and repost the GI.
    The above steps should resolve your current issue. However, this may not be the best approach as you will need to keep asking user to reverse their GIs every time the stock quantity is less than invoiced quantity. I would recommend that you talked to FI folks and convince them this is part of standard SAP process. It makes sense because we want to distribute the difference between invoice price and PO price to the existing stock quantity. Without this restriction, the moving average price can be skewed disproportionately.

  • It is not possible to configure the selected XI domain

    Hi...
    PI 7.0 server on Windows environment and database is SQL Server.
    PI Server pick and place the messages from r/3 to r/3 in Oneway but in the reverse it is pick the messages from source but it is not place to the target system.
    The error messsage in RWB in end to end monitoring...
    It is not possible to configure the selected XI domain because the Integration Server does not exist or could not be read from the SLD
    In Component monitoring...
    500 internal server error
    Application error occured during repuest processing..
    Thnx
    Raj

    Thanks for your promp response, tbluong.
    The configuration in SXMB_ADM > Integration Engine Configuration is already done and its check (F7) returns success (all green): "Role of Business System: Current Configuration = System Landscape" and "Corresponding Integration Server: Current Configuration = System Landscape".
    Any suggestion?
    Regards.

  • Subsequent function '' not possible due to a credit block

    Hello Experts,
    We have the dynamic credit check at delivery, so while creating the deliery a pop-up message comes with the exceeding credit limit and allows us to save the delivery.  After releasing the delivery with VKM5 when we try to enter the picking quantity in Picked Qty column we are getting the error Subsequent function " not possible due to a credit bock.  Even though the delivery is released why it is again doing the credit check.  How to over come this issue.
    Thanks,
    Sreehari.

    Hi Ravi,
    While creating the delivery if we enter both the delivery and picking quantity then it is throwing the error message, now it is being released with VKM5 transaction.  In this case there is no second time credit check is happeing while doing PGI.
    In case while creating the delivey if we enter only the delivery quantity (not entering pick qty) and save the delivery then also it is shows the delivery is blocking due to credit check.  But after releasing it with VKM5, when we enter the pick quantity in the delivery (to do PGI) it again throwing the error message of credit block.  The credit check is happening again in picking.
    Please let me know how to resolve the issue.
    Thanks,
    Sreehari.

  • UCCX 8 - DOC[variable] usage not possible ???

    Hi all,
    I'm actually busy developping some scripts and I'm able to upload prompts, documents, and everything standalone. Now I will need to compile everything in a script and ideally I would need to put some parameters as DOCument filename...
    If I try with a Document like :
    Name : myDocument
    Type : Document
    Value : DOC["FileStored.xml"]
    It works perfectly.
    If I try the following like :
    Name : myVariable
    Type : String
    Value : "FileStored.xml"
    Name : myDocument2
    Type : Document
    Value : DOC[myVariable]
    It seems not to work.
    My main goal is to be able to go and pick the right XML file depending of some conditions I might put in my script... If not possible it will need to put many "if" to determine which file I need instead of concatenating the right file name based on my conditions ...
    Any tip on how to do this?
    Thanks in advance
    Regards
    Christophe

    Hi Christophe
    My approach to this has been as follows:
    String, parameter, sDocumentFilename
    So sDocumentFilename is a simple String, and made a parameter enterable in the web UI. You would set this to "myfile.xml" or whatever is appropriate.
    THen in the script:
    set docWhatever = DOC[sDocumentFilename]
    This correctly sets docWhatever to DOC[myfile.xml]
    Presumably it's some hidden magic of the Document object/set step that makes it work like this rather than using the variable name of the string in the variable definition for the Document. If I understand what you are asking correctly :-)
    Regards
    Aaron
    Please rate helpful posts..

Maybe you are looking for