Picture Settings being overidden

My Picture settings for Mode, light effect, and energy savings are being overidden somehow every 20 minutes. Also if I set these settings on the TV then when I turn on the STB they immediately change. I did speak to a Verizon Tech on the Phone and he claimed it was not FIOS but something in the TV.
Solved!
Go to Solution.

Hmm, I know my STBs usually reset their own video settings when they are turned on/off (i.e. SD override, resolution, etc.), but I haven't heard of them resetting the TV's.

Similar Messages

  • IMovie Picture Settings Problem

    Hello Apple Support Boards members,
    The pop-up window of my picture settings when choosing a photo to import (you know, with the Ken Burns effects) is out of my screen's range.
    I discovered that using Exposé, but it seems this pop-up window is literally unreachable, being a bit further from the edge of my screen. (right edge that is).
    How can I reset its position/ have it back?
    Thanks in advance.

    This problem can be caused by iMovie's failure to handle one of its own features.
    The location of the Photo Settings Window is "stuck" to the location of the project window opening it. This can cause the Photo Settings window to disappear off screen.
    Recipe for the problem:
    1. Place the project window in the lower right corner of the screen.,
    2. Open the Photo Settings window. Drag it to the upper left corner of the screen.
    3. Move the project to the upper left corner of the screen.
    4. Switch to editing something OTHER THAN photos, which causes the Photo Settings window to close.
    5. Now try to open the Photo Settings window. It is inaccessible. It is off-screen, where you can't see it.
    6. To rescue the Photo Settings window, drag the project window back to the lower right corner of the screen. Or Quit iMovie and re-open the project.
    To avoid this problem, routinely place the Photo Settings window over the Preview area.
    Another way to avoid the problem is for the iMovie programmers to check the location of the window before it opens, and always move it on screen. (Tsk, tsk.)
    Karl

  • I have set my daughter up a user account on my pc. I have got her own itunes set up and she has signed in with her apple id etc. no problem but, despite all the settings being right and music being selected i cannot get her ipod to sync music.

    I have set my daughter up her own Itunes on my pc but, despite all the settings being right and having logged in on her own account it will not sync music. the first time she tried it wiped any music off that is on there and now will go through sync but music is still not syncing to the ipod. it also shows on the bar at the battom as audio content being there but wont appear.

    - Restore from backup. See:                                 
      iOS: How to back up

  • HT4906 Is there a way to keep certain pictures from being sent to iCloud?

    Is there a way to keep certain pictures from being sent to iCloud?

    Sorry, I meant from my Mac. I have pictures on my Mac that I don't want sent to my other devices.

  • Is there a way to retrieve pictures after being deleted on accident?

    Is there a way to retrieve pictures after being deleted?

    Currently, if you didn't offload them to your computer, no.

  • HT1349 some internet pictures are being shown as a ?, even pictures of apps in the app store.

    Some internet pictures are being shown as a ?, even some pictures of apps in the app store.

    Should be reported to MS.
    You may click on the 'Feedback' tab at the bottom of the WindowsPhone Store page to do so ...
    To add to your point ..ALL Paid applications should (must) have a Full featured TRIAL version ..
    Attachments:
    Capture.JPG ‏134 KB

  • Toshiba 39L4353DB - picture settings

    Hi all,
    could anyone advise on the best picture settings for this model. Most reviews say set to Hollywood day or Hollywood pro settings but even with adjustments to contrast & brightness controls the picture seems too greyed out. The standard setting is about the best I can get but seems too vivid for my liking.
    The auto view setting is too dark, dynamic too bright. Anyone out there with this model who give some guide what they have set their set to. I have had two previous Toshiba televisions & have given excellent service with no trouble but I feel the picture settings were far superior to the current 39L4353DB.

    As Im not mistaken there are three (beside the Dynamic and standard mode) additional picture presents: Hollywood Night, Hollywood Day and Hollywood Pro
    Hollywood Night and Hollywood Day mode should be used in different ambient light settings.
    Hollywood Pro default values seem to be very similar to Hollywood Night but Pro supports additional auto-calibration function.
    But its not easy to provide the best picture settings because this depends always on different factors for example; device which is connected to TV, environment, viewing habits, picture source and quality
    I would recommend you to download some basic full hd test images and to calibrate the TV for your own proposes.
    Maybe this thread could be helpfull too:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=72951

  • Custom Picture Settings for Insignia 42" NS-L42Q-10A

    Does anyone wish to share their custom picture settings (contrast, brightness etc.) for the Insignia 42" NS-L42Q-10A? The vivid default is to bright, so I have been trying to come up with a custom setting and would like to hear what has worked for other owners.
    Thanks.

    Well, it turns out that I neglected to include a critical piece of info in my post.  This behavior was occuring when using my Harmony 550 remote with the Insignia TV.
    I tested the behavior with the remote that came with the TV and the settings were saved.  So I went to change the settings on my Harmony remote when I discovered Logictech had a software update that included the Insignia TV.  Installing that update fixed the issue.
    And in case anyone else reads this, I am very pleased with this television set.  I had to learn a few things about HDTV first though to get everything out of it that it offers.

  • Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    What format are the pics - jpg or raw?
     Cheers, Tom

  • How do I make sure my pictures are being backed up on my photo stream?

    I kept getting notifications every time I charged my phone telling me that I didn't have enough space in iCloud for my phone to be backed up. I deleted the camera roll from being backed up on iCloud because I was told the last 1,000 pictures would automatically be uploaded to my photo stream on iCloud. I was also told that my photo streams do not count against iCloud storage because my phone hadn't been backed up for 11 weeks. How do I make sure my picture are being backed up on my photo stream?

    Photo stream doesn't back up photos, it streams them to your other devices.  Photo stream photos only remain in iCloud for 30 days, allowing sufficient time for them to download to your devices/computers.  It is true that photo stream photos don't count against your storage.
    You also shouldn't rely on your backup to save your camera roll if you're going to delete the photos from your phone.  If you delete them, then back up again, the new backup will overwrite the backup containing the deleted photos and they will be lost.
    If you want to save your photos, import them to your computer using your usb cable as explained here: iOS: Import personal photos and videos from iOS devices to your computer.

  • I cannot log out because it says pictures are being imported

    It wont let me log out because it says pictures are being imported but they aren't

    You'll need to Force Quit the app - it's an option under the Apple menu
    Regards
    TD

  • Pictures not being displayed on twitter

    Certain pictures on twitter are not being displayed on firefox but work fine in internet explorer
    an example page is http://pic.twitter.com/flmKKGz8
    with firefox there is no piture just the message, when looked at in internet explorer the big pucture under the message can be seen

    Hello Cor-el Thanks for the advise, I checked a few things as you mentioned and it turned out that the ad-block add-on was preventing the pictures loading, very strange as it doen't do it anywhere else on pictures, but all rectified now.
    Thanks again :)

  • How to disable print dialog settings being saved, in the registry or otherwise?

    Is it possible to disable the print dialog settings -- such as duplex printing -- from being saved after the Adobe Reader is closed? So each time the application is opened, and one prints a document, it is printed according to default settings?
    OS: Windows 7 64-bit
    Product: Adobe Reader XI
    Message was edited by: Bill Thompson

    Turn off Print menu
    Location
    User Configuration\Administrative Templates\Windows Components\Internet Explorer\Browser menus
    Recommended
    High: Enabled
    Medium: Enabled
    Low: Disabled
    Description
    This policy setting allows you to manage whether users can access the Print menu.
    If you enable this policy setting, the Print menu in Internet Explorer will not be available.
    If you disable or do not configure this policy setting, the Print menu in Internet Explorer will be available.
    Hi Rob,
    If the above shown option is your answer for my question, it disables total print menu in the internet explorer. I am not searching for that. I am searching for solution to disable print dialog box after user pressing print option(Ctrl+p).
    If not please share me particular option, i am unable to find that option.
    regards
    Anvesh

  • Raw settings being changed when running droplet

    When I process Canon Raw files using a droplet Photoshop appears to be opening the files through ACR and converting them.
    To process Raw files I open them from Bridge into ACR and adjust the settings for the files, then click done. I then take those files and drop them on a droplet. The resulting Psd files are beig processed by the droplet, but their settings are being changed.
    For example, I open 10 files in ACR and set them to 8bit, then click done. I then open another file in ACR and set it to 16 bit. If I then run the first ten files through a droplet they are all changed to 16bit (the dropket does not include a conversion to 16bit)
    I'm using a PC

    Clarity and Exposure are per-image metadata that should be distinct per image.
    Admittedly I have only rarely used droplets and only as an output export action to apply to files coming out of LR some years back so am not sure if what is happening is to be expected or not, but here are some questions to help clarify what is happening for others to verify if that’s how things should be working or not:
    Are you looking at a raw file in ACR before and after being processed by your droplet and you see different settings or are you just looking at the PSD and seeing it looks different than the raw file in ACR?
    Do settings change if there is only one raw file dragged onto the droplet at a time and are the settings the same for every image no matter which images or how many are dragged at a time (the settings are saved as part of the droplet)?
    Are the settings the same for every image in the group that have been dragged onto the droplet but change from one group to the next (the droplet is picking up the settings of one of the images in the group and applying that to all of them)?
    Are the settings different for different raws in the group but seem to be correlated with the previous or next image in the set dragged onto the droplet? (the settings are picked up from the wrong image in the group)?
    If you make a droplet with that does nothing other than open the raw file, not even save it to a PSD, do the raw file settings change?  In other words does it matter what you’re doing in your droplet for the settings to change?

  • Google and all of its related services are not showing as a secure and pictures are being blocked.

    I was forced to add manual exception to even use Google search AND Google email but pictures are still being blocked in Google search. The first 12 pictures will show but the rest only reflect a broken square in the top left corner of where the image preview should be. When I click on the blanks- it shows the picture but I can't work efficiently that way. How do I remove the block on images until the issue can be corrected in another update?
    Google Chrome was doing the same thing (blocking images from trusted MAJOR sites like Facebook and Twitter but considering its own material secure). Chrome did not allow a user to control if the images could show and I switched to Firefox as a result. Please fix this. Thanks!

    All I had to do was update my clock time and it fixed the issue. My clock was showing December 6, 2014 as the date. Sorry. You can consider this resolved, Thank you!

Maybe you are looking for