Picture & Slideshow error message...

www.wrdinc.net or web.mac.com/wrdinc
i have several pages of pictures on my iWeb site. on most of the pages ("captured" "europe circa 2002" "the empire state") the pictures and slideshows display normally. On one page ("the happiest place on earth")however the slideshow features gives an error message. The pictures display fine on the page itself but an error occurs when i click on the thumbnails for a bigger view. i get the same error message when i try to launch the slideshow in the galleries within the "happiest place on earth" gallery.
ive tried to "publish all" to solve the problem but that didnt work.
***?

I'm thinking that it might have something to do with your naming scheme for your photo pages. I notice that you have named all of your photo pages with smart quotes around them, and I'm wondering if this might be part of the problem. I know that apostrophes in the page names can cause the slideshows to not function.
Of course, the rest of your photo pages are named similarly as well, with the smart quotes. At least give this a try...either take the quotes off the non-functioning pages or disable the smart-quote function in the iWeb preferences panel (this will disable the smart quotes for your entire site and leave regular quotation marks).
But your slideshows are uploaded just fine. I think the javascript that launches the slideshow function is confused by all the punctuation...
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-Everyday%20Disneyland_files/slideshow. html
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-50%20Years%20of%20Magic_files/slidesho w.html
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-World%20Premiere_files/slideshow.html
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-CHOC%20Walk%20%2706_files/slideshow.ht ml
If you wanted to, you could just replace the "Start Slideshow" hyperlink with the ones above...(you'd have to copy and paste the icon graphic and attach the hyperlink yourself). But if I were you, I'd figure out what is causing this and try to fix it so that iWeb can keep doing the work for you.

Similar Messages

  • Cannot download pictures get error message

    when trying to download pictures I get an error message. The Ipod "bill's ipod" cannot be updated. The disk could not be read from or written to. Am i doing something wrong or is there somethig wrong with my ipod?

    It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
    Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive.  Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
    OT

  • 'empty slideshow' error message

    Hi all,
    Sorry to repeat this question, but I'm desperate - the movie I've made is due to be screened in two days and I can't burn it.
    When I click the Burn button, I get this message:
    The following warnings and errors were found during the validation of the current project:
    - There is an empty slideshow in your project. Make sure every slideshow contains at least one image or delete any empty slideshow before burning this project.
    There is no slideshow in the project. The Map view shows no slideshow and there are no warning signs in the Map view.
    Can anyone suggest a fix?
    Thanks,
    Andrew

    Hi there,
    Thanks for following up on my problem - I'm always grateful for advice even if the immediate problem has been dealt with.
    Actually, I never got a 'blank slideshow' appearing in my map, so there was nothing to fix or delete. I just kept getting the error message saying that there was an empty slideshow. Weird! At one point I created a slideshow just so I could delete it, but the message kept appearing.
    Thanks for trying,
    Andrew

  • Power point slideshow error message

    I went to give a presentation today infront of some very important people within the company, so I opened powerpoint like usual and opened the presentation. When I clicked slideshow to start it locked up and sent an error message, so I had to give the presentation from the general powerpoint screen which took a lot away from the presentation due to the lack of effects that I created. The only thing that I have done since the last time I gave the presentation was install new operating system software. I have another presentation to give tomorrow so Im starting to panic a little bit.

    No experience, but you may want to check to determin if that particular computer falls under the iMac G5 Repair Extension Program for Video and Power Issues

  • Picture Text Error Message

    So with recieving some of my picture texts now i am getting an error message that states the following "One or more of the message components have been deleted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset" is this a carrier issue or a software issue? I am using an iPhone 5 with the 7.1 OS, thanks!

    diesel vdub wrote:
    SMS and MMS are carrier features, contact the carrier to troubleshoot.
    Ok thanks will do...someone told me to try adjusting "mms max messaging size" do you know anything about that?

  • PE Slideshow output closes at 42% with error message

    I created a slideshow in the Organizer this summer from my PE 7.0 and it worked great. Now, I'm trying to do a new slideshow and when I output the file whether to a disc or as a file, it stops at 42% with a Microsoft Error message that the program has to close. I've been searching answers on internet but haven't found anything specific. Anywone have any ideas for me?

    Note: my most important comment and question is near the end and has 3 asterisks in front of it.
    I did have some formatting problems when adding my new comments so the  color designating your responses is lost and the formatting may be weird, but I don't think that will prevent our discussion from continuing.
    -- how many photos (approximate number is OK)
    72
    -- resolution of the photos (for example are they from a 5 megapixel camera or a 12 megapixel camers)
    10 mg pixel camera
    -- what file format - like jpeg or psd or tiff or a camera RAW,
    camera RAW probably
    ..... did your previous successful slideshow also use raw format files? I have never done that and I don't know how many other people do. What camera took these photos and what is the file type of the file?
    -- did you add any type of video file to this slideshow and if yes, what type of video,
    None
    -- how much available free space on your system drive (probably your C drive)and if you set Windows parameters to re-direct Temporary files to another drive also post free space on that drive.
    123 GB on hard drive and 588 GB on external hard dirve. I have the scratch disk to operate from both of these in the prefs menu in PE
    .... in my question I had actually meant Windows temporary files rather than PSE scratch disks, but with your numbers for available space you should be OK
    -- which Windows Operating System,
    Windows XP
    -- did you add a music file and if yes what type and what was its source,
    Yes, on music, 2 songs. Orignally from I-tunes but ripped into Windows Media Player to mp3 format.
    Is the postition where it stops anywhere near where one song stops and the other begins?
    It seems to work great until it gets to about picture 50 and it stops...must be the 42% mark.
    ..... the fact that you have isolated the specific picture at which it stops is good. 
    That 42% number might be meaningfull or not as many percentage complete numbers are really estimates rather than precise numbers.
    ***.... did you actually get a partial output file and is that how you identified which photo? 
    Perhaps it is the photo after what you see that causes a problem or the timing of the music if that changes near this point

  • I can see the pitcure in my folder but I get an error message when I pull up the picture

    I can see the pictures in my iPhoto folders but when I click on them to access, I get an error message.
    How can I pull these up? 

    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • MMS pictures not coming through, no error message

    My phone randomly stopped receiving MMS picture messages. I've had four sent to me, but none were received and no error message was displayed. I am able to send them just fine. I didn't change any settings. What should I do?

    Have you contacted AT&T to ensure no network error and/or you verify your AT&T accounts settings didn't get messed up with respect to MMS?

  • Sending pictures to email via messages produces an error message

    I fairly certain that I've done this before, but I'm trying to forward pictures from messages to my email. Everytime I try I get an error message saying that the recipient has chosen not to receive messages from a 900-0 number on sprint. Has anyone else had this error or is it not possible to send pictures to an email address this way. Again, I'm pretty sure I've done this in the past.
    Any help is appreciated.

    http://www.kirupa.com/developer/actionscript/flash_php_email.htm
    hth,
    blemmo

  • When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

    When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
    Problem Event Name:             APPCRASH
    Application Name:                  iTunes.exe
    Application Version:               10.4.0.80
    Application Timestamp:          4e262cfr
    Fault Module Name:               QuickTime.qts
    Fault Module Version:             7.70.80.34
    Exception Code:                     c0000005
    Exception Offset:                    00146b30
    OS Version                                                            1033
    Locale ID:
    Additional Information 1:          0a9e
    Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
    Additional Information 3:          0a9e
    Additional Information4:          0a9e372d3b4ad19135b953a78882e789
    Any assistance I can get will be greatly appreciated.

    Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

  • I am getting  an error message when trying to burn pictures to a dvd rw, and it says the disc can't communicate with the drive?

    I am trying to burn some wedding pictures to a blank dvd rw.  I keep getting an error message that says the drive and the disc can't communicate.  I have run a repair disc and repair disc permissions, restarted my laptop, and still get the error.  What else can I do?

    Hi sheryl525,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801#
    Cheers,
    - Judy

  • After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

    After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

    Can you browse the Time Machine drive from Finder?
    If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

  • When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

    When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

    It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
    Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive.  Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
    OT

  • Getting error message "Unable to Share" when trying to send pictures either by text or emai!  Is there something in my security settings that I need to change?

    I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share".  Just purchased the iPhone 6 plus. Never had this issue with the 5.  Is there something that I need to change in my settings?

    I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share".  Just purchased the iPhone 6 plus. Never had this issue with the 5.  Is there something that I need to change in my settings?

  • I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

    I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
    Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
    Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
    How do I fix this?

    Hi there scarbo59,
    You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below. 
    iOS: Unable to import photos to computer
    -Griff W. 

Maybe you are looking for

  • Problem with BAPI_ENTRYSHEET_CREATE

    Hi Experts, In my upload program for Service Entry Sheet (ML81N) i am using BAPI_ENTRYSHEET_CREATE.I am reading all the PO related information (like PO, item, quantity, gross price, network, activity etc) from a flat file.Program is successfully crea

  • Pairing mobil phone with iMac

    I would like to send some photos from my Samsung mobil phone to my new iMac using Bluetooth. I can get the devices to pair with no problem but the "Connected" button goes red (not connected) and I can't find a way to change it to green. When I go to

  • Rank function in Answers

    Hi, I have to produce a bar-chart with Number of Projects(Y axis), Project Phase(X axis). For example, x axis should have labels like Phase-1, Phase-2 etc., and in each phase teh number of projects should be the bar. The catch is , the number of proj

  • Finding what album photo is in

    I just got a new iMac and am running iPhoto '08 (v. 7.1.2). My mistake was asking the folks at the Apple store to transfer my data from my old Mac to the new one. I specifically said I do not use iPhoto, although there are old photos in the old iPhot

  • How to skip the '\n' char when reading with BufferedReader

    Hello to all the comunity that is at these forums, ;) I'm a venezuelan IT student, and as many arround here, I'm looking for some help with this homework... well the thing is that I need to read from the System.in untill I get the "" String. Well the