'empty slideshow' error message

Hi all,
Sorry to repeat this question, but I'm desperate - the movie I've made is due to be screened in two days and I can't burn it.
When I click the Burn button, I get this message:
The following warnings and errors were found during the validation of the current project:
- There is an empty slideshow in your project. Make sure every slideshow contains at least one image or delete any empty slideshow before burning this project.
There is no slideshow in the project. The Map view shows no slideshow and there are no warning signs in the Map view.
Can anyone suggest a fix?
Thanks,
Andrew

Hi there,
Thanks for following up on my problem - I'm always grateful for advice even if the immediate problem has been dealt with.
Actually, I never got a 'blank slideshow' appearing in my map, so there was nothing to fix or delete. I just kept getting the error message saying that there was an empty slideshow. Weird! At one point I created a slideshow just so I could delete it, but the message kept appearing.
Thanks for trying,
Andrew

Similar Messages

  • Empty Slideshow error

    When I try to burn my DVD, I get an error message telling me I have an empty slideshow in my project. Make sure every slideshow contains at least one image, or delete any empty slideshow. Fine, but when I switch to Map View, there are no warnings to be found. Any suggestions?

    You're welcome. Feel free to keep us posted on the new project you attempt.
    Hope it works better than the first.
    Good luck.

  • Empty Slideshow Error (there are no empty slideshows)

    Hello All,
    I am using iDVD 7.0.3 and I keep getting the following error message:
    * There is an empty slideshow in your project. Make sure every slideshow contains at least one image, or delete any empty slideshow before burning this project.
    when I attempt to burn my disc. I have checked and rechecked and checked again and all of my slideshows have images in them. Does anyone have any suggestions? Thanks!
    _Kyle

    I've got the same problem as well. From what I can guess, it looks like the iTunes application on the secondary Mac is streaming the photos, but stalls out in order to build a cache of thumbnails or appropriately sized images to send over to the AppleTV.
    The AppleTV isn't expecting the connection to the Mac to take as long as it does to build the streaming image library and then pauses/timeouts while the library is being built.
    I'm not sure if the library gets cached so the AppleTV doesn't pause during reconnections and reboots but if that is the issue, it would be nice if Apple updated iTunes to be able to keep the AppleTV streaming library cache current so the pause/timeout doesn't occur when everyone is gathered around the television.

  • Picture & Slideshow error message...

    www.wrdinc.net or web.mac.com/wrdinc
    i have several pages of pictures on my iWeb site. on most of the pages ("captured" "europe circa 2002" "the empire state") the pictures and slideshows display normally. On one page ("the happiest place on earth")however the slideshow features gives an error message. The pictures display fine on the page itself but an error occurs when i click on the thumbnails for a bigger view. i get the same error message when i try to launch the slideshow in the galleries within the "happiest place on earth" gallery.
    ive tried to "publish all" to solve the problem but that didnt work.
    ***?

    I'm thinking that it might have something to do with your naming scheme for your photo pages. I notice that you have named all of your photo pages with smart quotes around them, and I'm wondering if this might be part of the problem. I know that apostrophes in the page names can cause the slideshows to not function.
    Of course, the rest of your photo pages are named similarly as well, with the smart quotes. At least give this a try...either take the quotes off the non-functioning pages or disable the smart-quote function in the iWeb preferences panel (this will disable the smart quotes for your entire site and leave regular quotation marks).
    But your slideshows are uploaded just fine. I think the javascript that launches the slideshow function is confused by all the punctuation...
    http://web.mac.com/wrdinc/iWeb/WRDinc/%20-Everyday%20Disneyland_files/slideshow. html
    http://web.mac.com/wrdinc/iWeb/WRDinc/%20-50%20Years%20of%20Magic_files/slidesho w.html
    http://web.mac.com/wrdinc/iWeb/WRDinc/%20-World%20Premiere_files/slideshow.html
    http://web.mac.com/wrdinc/iWeb/WRDinc/%20-CHOC%20Walk%20%2706_files/slideshow.ht ml
    If you wanted to, you could just replace the "Start Slideshow" hyperlink with the ones above...(you'd have to copy and paste the icon graphic and attach the hyperlink yourself). But if I were you, I'd figure out what is causing this and try to fix it so that iWeb can keep doing the work for you.

  • Power point slideshow error message

    I went to give a presentation today infront of some very important people within the company, so I opened powerpoint like usual and opened the presentation. When I clicked slideshow to start it locked up and sent an error message, so I had to give the presentation from the general powerpoint screen which took a lot away from the presentation due to the lack of effects that I created. The only thing that I have done since the last time I gave the presentation was install new operating system software. I have another presentation to give tomorrow so Im starting to panic a little bit.

    No experience, but you may want to check to determin if that particular computer falls under the iMac G5 Repair Extension Program for Video and Power Issues

  • Can't empty trash error message -50

    When I try to empty trash I get error message -50 which basiclly states that I can't empty my trash.  What is error -50 and How do I get past it to empty trash.

    Run through this list of fixes
    Start with #12 and #6 if that does clear your issue, start from the top and work down.
    Backup your files to a storage drive first (not only TimeMachine, as it might be corrupted and fail to restore)
    ..Step by Step to fix your Mac

  • With Firefox running, Office 2007 generates a "Cannot Empty Clipboard" error message when pasting information between Excel cells -- the behavior goes away when I close Firefox. Is there a way to prevent this?

    I am running Windows XP, Office 2007, and Firefox 3.6.13.
    Whenever I have Firefox running in the background and I attempt to paste information between Excel cells a "Cannot Empty Clipboard" error is generated. I have attempted numerous other fixes for this: Excel and Office settings. But nothing seems to help. When I close Firefox, the errors are no longer generated.

    The Skype add-in was the culprit in my case. Disabling it fixed the problem. As soon as I enable it, the problem comes back.

  • Emptying trash error message

    Perhaps someone else has experienced this. It doesn't always happen but sometimes when I try to empty the Trash, I get the following message:
    The operation can't be completed because the item "DS.store" is in use.
    So I'll do a secure empty trash and it works but I wonder what this means. Any ideas?  Thanks in advance.

    Sorry. I've posted this answer in the wrong topic. As for you ask for, don't bother of it. The file DS.store is usually invisible, and tracks all of icon's positions on the desktop. For some reason, it is in the trash. Do you use some program to manipolate these files?

  • Empty inbound Error Message

    We have MI. 2.5 SP09 when we do the Synchronization we receive messages We assigned application (WORKFLOW) to all devices and the user XX has al needed authority
    Why the application assigned to the user not appear?
    We got the following message in the trace file:
    [20041204 12:47:19:465] D [MI/Smartsync             ] User XX has not been installed on MW, it is not ready for sync :XX
    Thanks,

    Thanks for your answer.
    But i stell have some difficulties to complete installation guide. For example:
    1. When I tried to use MI_MCD transaction for Defining the Installation Sequence, I can not add any component; because when I select the component it inserted incorrectly.
    The component version inserted in the #mobile component# field.
    2.To enable Installing the SAP MI Client Component From the Internet we use the URL like http://platinum.dha.aramco.com.sa:50200/sap/bc/bsp/sap/me_fw_install/install.htm but when I use it I can not access by the same user that can access to http://platinum.dha.aramco.com.sa:50200/me/WebConsole/login.
    The ME_FW_INSTALL application is activated.
    Thanks Again
    Bakor A. Kamal

  • "filename.aif" is empty! error message when importing long mp3 file

    hello everyone,
    I am having issues importing large mp3, and even .aiff files into garageband. when I try to import a file that is around 4 hours long - garageband goes through the process of "importing" "converting" and then right at the end - it gives me this: http://idisk.mac.com/digory.mcginn-Public/GB%20error.png
    I have managed to get around the problem by importing the file into iTunes, then using a virtual CD drive - burn the file to "a virtual CD." iTunes will create 78 minute long files to fit each CD, and those can be imported to GB, and put back together.
    this is long and convoluted, and I would rather not have to do this.
    if you've taken a look at the picture I've posted, you'll notice that the time on the timeline is over five hours. I pulled the tempo of the project all the way do to 40 - to create a longer space - but it does not help.
    what is really bothering me is that garageband will, yes will allow me to export the project after I've created a bunch of mp3's that is over 6 hours long - but won't let me import one.
    I was hoping there is a way to fix this
    thanks so much if someone could help!

    http://www.bulletsandbones.com/GB/GBFAQ.html#aiffwontimport
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Prb display error message while creating PR at ME51n in ME_PROCESS_REQ_CUST

    Hi All,
    I have this requirement to check the cost center availability in PR screen (ME51n).
    If cost center in the Account assignment tab is not empty, display error message  and not able to create the PR.
    With my code below, it doesn't triggered the error message and PR created.
    Could anyone help?
    METHOD if_ex_me_process_req_cust~process_account.
    DATA: w_account_ref TYPE exkn.
    w_account_ref = im_account_ref->get_data( )
    IF w_account_ref-kostl IS NOT INITIAL.
      MESSAGE e303(ME) WITH text-001 w_account_ref-kostl text-002.
    ENDIF.
    ENDMETHOD.
    Thank you.
    SW

    Hi,
    You have to use definition MMPUR_MESSAGE 'E'  ME 303   text-001 w_account_ref-kostl text-002.
    This will throw the error during check and save instead of message e303(me) .
    Hope it helps.
    Sujay
    Edited by: Sujay Venkateswaran Krishnakumar on Oct 5, 2010 2:54 PM

  • Error message at the selection screen while processing screen logic

    Hi All,
      I need to show error message at the selection screen.
    I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
    But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
    Since I am in the middle of the screen processing whenever I am giving a error message.
    Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
    Regards,
    Mahesh

    hi
    If u are trying to validate a field use
    AT SELECTION_SCREEN ON <field>
    if want to validate a block
    AT SELECTION SCREEN ON <block>
    If Universal Validation
    AT SELECTION SCREEN
    and display a 'E' Message inside the block.
    You can Enter Correct Value and start processing Forward.
    hope this will help.
    Regards
    Sumit Agarwal

  • Custom error message using MESSAGE Tag

    I am using mulitple input fields in the page and i want to validate them for not empty. If it remains empty then error message should be displayed. This error message is different for every field.
    I've used message tad for this purpose. Is there any way to show the custom message according to our own requriements using this message tag???
    Thank you

    You need to override the default error messages with your own messages properties file which you specify in the faces-config.xml.
    Check this for examples:
    [http://www.jsf-faq.com/faqs/faces-messages.html#126]
    [http://balusc.blogspot.com/2008/07/dao-tutorial-use-in-jsf.html#MessageBundleFile]
    For required fields you need to override javax.faces.component.UIInput.REQUIRED.

  • After editing a photo, I sometimes get an error message that the "File is empty".  Can revert to original and start again, but file disappears after editing.

    So frustrating!  I open the photo.  Edit by cropping, adjusting color, etc.  It's perfect.  I click DONE and move on to the next.  When I come back, the first photo is gone.  I can see it in the album but cannot open it.  When I look at the file information, it shows zero KB.  If I move it to the desktop and try to open it, the error message says the file is empty.  I can revert to original and there it is.  Edit again, and again it disappears.  What am I doing wrong?  I am using iPhoto 09

    You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
    Regards
    TD

  • Error message: File can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.

    I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
    “-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
    Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?

    I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
    Hope this will help other people who encounter similar problems in the future!

Maybe you are looking for