Pie Chart Drill Down Report

Hello All,
Please help. I created a 2D Pie chart. How do I get chart to drill down to a report based on the slice of pie I click. I've already created the report. I can't seem to get the link working.
Artnette

Artnette,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:156
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

  • SVG Pie Chart drill down report

    I have created a svg pie chart report within a chart region. the chart contains url drill down.
    The urls work fine but it opens the result from the url in the same chart region on the same page.
    How can I get it to open on either a new page altogether or on another region on the same page.
    Regards
    iculhane

    How do you get the url drill down to work? Can you explain to me? I have a 3d pie chart, what I want is when I click one of the pieces, it will drill down to a report.
    Thanks,
    Helen

  • Issues with multilevel pie chart drill down with push button

    I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up.  When I preview, the Push Button goes into two state and I have to double click to go back.  Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
    Thankyou.

    Hi Murali
    This is exactly the same what i tried to do,
    Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
    go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
    if i click any pie slice it will jump to Pie chart 4 straight,
    I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
    the data with the PUSH button (Destination cell insertion with blank or 0).
    did you find a solution for this issue ?
    Thanks
    Chandra

  • Pie-chart drill-down

    Hi,
    I have created a pie chart on my report. I want it so that the user can double click on a segment of the pie and drill-down to view some detailed logs. The logs just being a list of details from the records like "name" "age" etc.
    I have read some stuff on subreports and linking, but im not quite sure wether this is the way to do this or if there is an easierway without all that subreport linking malarchy.
    Is there an easier way? and if so, could you please provide me with a step-by-step as im fairly new to this whole crystal reports thingamajig. Thanks
    J

    Hi James
    You can get a drill down on your pie chart once you apply groups in your report and create chart based on those groups.
    For example: I create a report to display the last year sales for all the cities in a country. I want a drill down onmy pie chart for the cities. I do the below:
    1. I create two groups on Contry and City.
    2. Now I create a pie chart. In Data tab of Chart expert select the group for City in On change of, and show value Last year sales.
    3.Place the chart on group header of Country group.
    4. Refresh the report, now I would get the drill down for the cities for every country in the Pie chart.
    For more information please refer to Crystal Reports Help.
    Hope this helps!!!
    Regards
    Sourashree Ghosh

  • PIE Chart Drill down in bex report

    Hi Friends,
    In my bex report i have pie chart for year 2008.
    Shall I drill down on this report means if  i click on one part of the pie chart will i go to another report or another pie chart.
    Can any one pls tell me is it possible .
    Thanks & Regards,
    Ramnaresh.
    Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

    Hi ,
    Thanks for reply.
    how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
    Can you pls guide me.
    Thanks & Regards,
    Ramnaresh.

  • Pie chart drill down in bex

    Hi Friends,
    In my bex report i have pie chart for year 2008.
    Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
    Can any one pls tell me is it possible .
    Thanks & Regards,
    Ramnaresh.

    Hi ,
    Thanks for reply.
    how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
    Can you pls guide me.
    Thanks & Regards,
    Ramnaresh.

  • Pie chart - drill down/up with HierarchicalCollectionView

    y'ello,
    I started to build really simple pie chart with drill down data feature. I decided to use hierarchicalCollectionView, to access children even parent of clicked item, but one problem I realized right now is that pie chart displays only data type ArrayCollection, and hierarchicalVollectionView and method openNode() can be used only Array data type, so when I debugged I realized that can not use openNode(hitData.item)  wih ArrayCollection data type b'cuz flash player pop-ups error window.
    Please, chcek short source code. I thought I can make hierarchy from ArrayCollection but can not use openNode() method that next I need this method later access parent or children. Simply when I click on one wedge, drill down, again, when I click, again drill down...when I click Ctrl+click get one level back then again and again....plese help me gurues
    Code:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
        <mx:Script>
            <![CDATA[
                import mx.collections.ArrayCollection;
                import mx.charts.HitData;
                import mx.charts.events.ChartItemEvent;
                import mx.collections.HierarchicalData;
                import mx.collections.HierarchicalCollectionView;
                [Bindable]
                public var cars:ArrayCollection = new ArrayCollection([
                    {type:"BMW", t_count: 150, children:[
                        {type:"1 class", t_count: 18, children:[
                            {type:"Coupe", t_count: 34},
                            {type:"Touring", t_count: 42},
                            {type:"Compact", t_count: 8}
                        {type:"3 class", t_count: 14, children:[
                            {type:"Kabriolet", t_count: 12},
                            {type:"Coupe", t_count: 34},
                            {type:"Touring", t_count: 42},
                            {type:"Compact", t_count: 8}
                        {type:"5 class", t_count: 7, children:[
                            {type:"Kabriolet", t_count: 12},
                            {type:"Coupe", t_count: 34},
                            {type:"Touring", t_count: 42},
                            {type:"Sedan", t_count: 8}
                        {type:"6 class", t_count: 15, children:[
                            {type:"Kabriolet", t_count: 12},
                            {type:"Coupe", t_count: 34},
                        {type:"7 class", t_count: 8, children:[
                            {type:"Kabriolet", t_count: 12},
                            {type:"Coupe", t_count: 34}
                        {type:"X3 class", t_count: 22, children:[
                            {type:"Sedan", t_count: 11},
                            {type:"Coupe", t_count: 9},
                            {type:"Touring", t_count: 5},
                            {type:"Compact", t_count: 17}
                        {type:"X5 class", t_count: 9, children:[
                            {type:"Sedan", t_count: 33},
                            {type:"Coupe", t_count: 18},
                            {type:"Hatchback", t_count: 7}
                        {type:"X6 class", t_count: 11, children:[
                            {type:"Coupe", t_count: 18},
                            {type:"Combi", t_count: 31},
                            {type:"Hatchback", t_count: 8}
                    {type:"Mercedes", t_count: 120, children:[
                        {type:"A class", t_count: 5},
                        {type:"B class", t_count: 12},
                        {type:"CLS class", t_count: 18},
                        {type:"CL class", t_count: 23},
                        {type:"C class", t_count: 12},
                        {type:"E class", t_count: 19}
                    {type:"VW", t_count: 320, children:[
                        {type:"Passat", t_count: 10},
                        {type:"Polo", t_count: 25},
                        {type:"Golf", t_count: 45},
                        {type:"Touareg", t_count: 15}
                //HCV from hierarchical data
                private var hView:HierarchicalCollectionView = new HierarchicalCollectionView(new HierarchicalData(cars));
                //event handler
                private function drillDownUp(event:ChartItemEvent):void{
                    if(event.hitSet && event.hitSet.length){
                        //DRILL UP
                        if(event.ctrlKey){
                            var hitItem:HitData = event.hitSet[0];
                            var parent1:Object = hView.getParentItem(hitItem.item);
                            var parent2:Object = hView.getParentItem(parent1);
                            if(!parent2){
                                myPieChart.dataProvider = hView.source.getRoot();
                            else{
                                myPieChart.dataProvider = hView.getChildren(parent2);
                        //DRILL DOWN
                        else{
                            var hitItem:HitData = event.hitSet[0];
                            if(hitItem.item.hasOwnProperty("children")){
    //                            hView.openNodes(hitItem.item); //here is problem!!
                                myPieChart.dataProvider = hView.getChildren(hitItem.item);
            ]]>
        </mx:Script>
        <mx:Panel title="PieChart DDD Test - Trh predaja automobilov - 2009">
            <mx:PieChart id="myPieChart"
                         dataProvider="{cars}"
                         itemClick="drillDownUp(event)"
                         showDataTips="true">
                <mx:series>
                    <mx:PieSeries field="t_count"
                                  nameField="type"
                                  labelField="type"
                                  labelPosition="inside"/>
                </mx:series>
            </mx:PieChart>
            <mx:Legend dataProvider="{myPieChart}" direction="horizontal"/>
        </mx:Panel>
    </mx:Application>

    Hi Jan,
           thanks for reply,sorry i am quite new in this forum not familiar with tabs and navigation,can you please elaborate/steps to find the business card
    thx
    Anwy

  • Pie chart drill down problem

    Hi,
    We are facing an issue with the drill implementation in the Pie chart of the dashboard. Initially, the drill functionality worked fine but now, we observe that the drill happens ONLY on the edges of the pie chart
    Now this behaviour is observed when we make following changes in the dashboard:
    1) If we add new filter in the existing qaaws connection for pie chart. (The problem persists even if we remap the qaaws connection)
    2) If we apply some color coding based on certain condition(formula) specified in the excel.
    if we revert the above conditions, then the Pie chart works fine
    We have tried the following things:
    1) deleting the existing pie chart and remapping the new one.
    2) Tried changing the destination cells for the pie chart.
    We are stuck up with this problem without any solution from a long time. We even tried redeveloping the whole dashboard but the problem persists.
    Version :Xcelsius 2008 SP3,fp3.1
    Thanks.

    This is actually an issue of the flash player.
    Installing Windows Flash Player 10.3 ActiveX control content debugger (for IE) will solve the problem.
    Or switch to Flash Player 10.1
    Windows Flash Player 10.3 ActiveX control content debugger (for IE) is available here: http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_ax_debug.exe
    For Netscape-compatible browsers, the version is available here: http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_plugin_debug.exe
    No need to remove the existing flash player.

  • Drill down reports using SVG component

    I've created and dynamic report and an SVG chart following the examples of the tutorials. I was wondering if, and how, it was possible to create drill-down reports i.e report on colour, then clicking on that colour would reveal the types of car and so on. Does anyone have an example?
    Thanks
    Darren

    Darren,
    The query for an SVG chart requires 3 columns: Link, Label, and Value. You use the Link value to provide a link to another page. This link can also pass parameters to the next page.
    If you set up a page for each "level" of your drill-down (e.g. color, type of car, etc), you can link from the higher-level page to the lower level page and pass the value that was clicked on in the chart.
    Take a look in the HTML DB User's Guide for the section about "Using f?p Syntax to Link Pages": http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10992/mvl_fund.htm#BEIJCIAG
    You would use that syntax in the Link column of the query for your chart. Here is part of a query I used to drill down from one pie char to another (on page 3), passing the selected project to a variable called P3_PROJECT.
    select 'f?p=&APP_ID.:3:&SESSION.::NO::P3_PROJECT:' || Project L,
    Project, sum(Time)
    from v_timesheet
    where ...
    Does that help?

  • Multi-Use Drill Down Reports?

    Hi,
    I'm just starting out with reporting in SSRS so this may be a silly question but I'm struggling to find a way to do what I want :)
    I have a large graphical report with several top 10 reports on different a cube. (eg. top 10 number of events, top ten numbers of computers affected) 
    I want drill down reports for both the Event Name and Computer Name, also to be able to click on the header of the report and get a complete unrestricted report. I have created a drill down report that has all the data and if I choose one item (say computer
    name) I can drop down to the drill down and filter the table in that with the computer name and return any results for that computer. I cant figure out how to have a secondary link that passes a wildcard to returns all results. I'd also like to have the ability
    to send an event name to the same drill down and a wildcard for the computer name. However I cant figure out how to get the filter on the table to accept any wildcards. 
    I dont want to have to create multiple reports for each of the different drilldowns, is this possible? (Easy to understand answers for a newbie if possible :) )

    Hi Chris_C2000,
    If I understand correctly, you have configure “Go to report” action in your report. It is Drillthrough in SSRS. You want to pass a value link to the corresponding report. We can add parameters in the drillthrough report, then pass parameters values to the
    report.
    I have create a simple report in my test environment. Suppose we have the same dataset (DataSet1) in main report and subreport with two fields: CalendarYear, SalesAmount. Please refer to it.
    Subreport:
    Add a table in the report body, fill with CalendarYear, SalesAmount fields.
    Add another dataset (DataSet2) with CalenderYear field.
    Add a parameter (CalenderYear) get Available Values from DataSet2 CalenderYear field.
    Add filter in the DataSet1, with values below:
    Expression: [CalenderYear]
    Operator: =
    Value: [@CalenderYear]
    Main report:
    Add a chart in the report, fill SalesAmount in the Values dialog box, CalenderYear in the Category Groups dialog box.
    Right click the bar in the chart, click Series Properties.
    Click Action in the left pane. Select “Go to report” option.
    Select the subreport below “Specify a report” prompt.
    Click Add icon below, and fill with following values:
    Name: CalenderYear                 Value: [CalenderYear]
    Then, when we preview the report, we can click the specific bar link to the subreport get the corresponding data.
    Reference:
    http://technet.microsoft.com/en-us/library/aa337477(v=sql.105).aspx
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Drill down report is showing popup even though it's disable in column properties

    Hello,
    I am facing an functionality issue where I have crated Summary to drill down report. Summary is chart and drill down is table view and I am using OBIEE Action link  here.
    Now I have disabled the Popup in column properties so when user click the bar on the graph they will directly navigate to detail report. But strangely after disabling the Popup, when i click on bar the drilldown report is coming as popup link.
    does anyone has any idea how to handle this issue??

    It would seem to be a issue with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered under warranty (if it is HP genuine) since you just purchased it. At this time I think that your best move would be to contact HP's Technical Support to see about further options for you.
    The only other option would be to try another new replacement cartridge to rule in or out the cartridge being at fault.
    If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • DRILL DOWN REPORT FOR DIFFERENT DATA SETS in 11G

    Hello.
    My requirment is to do a drill down report with 2 data sets.
    My first data set have all the chart of accounts , My second data set have all the transactions.
    in my report i have 2 data tables. One with the accounts , and when i click in one account get all the transactions for selected account in the second data table.
    Anyone know how i can do this
    Any help would be apreciatted
    Paulo

    You can use the drill down strategy, well described by my friend Kan:
    http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
    regards
    Jorge
    p.s If this answers your question then please grant the points and close the thread

  • SharePoint PPS Hide null or blank value in performancePoint chart drill down.

    Hi,
    I am using SharePoint Performance Point Service. Hide null or blank value in Performance Point chart drill down.
    Thanks & Regards
    Poomani Sankaran

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • Drill down report update

    Hi,
    How to add several currency value (USD, LKR) in drill down report - in Due Date Analysis for open Item report (S_ALR_87012168)
    Thanx.

    Hi,
    How to add several currency value (USD, LKR) in drill down report - in Due Date Analysis for open Item report (S_ALR_87012168)
    Thanx.

  • Drill-Down Report Printing Problem for Selection Parameters

    Dear Experts,
    Have tried to configure Drill-Down Report for Vendor Balances,
    Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
    User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
    Input Parameter Screen
    Report Output Screen
    Print Preview Screen (First Page - Selection Parameters)
    Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
    Thanks
    Regards
    P

    Hello Ms. Preeti,
    Thanks for your reply, Have designed the report through FKI0 (FKI*)
    Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
    Thanks for your help
    Kind Regards
    P

Maybe you are looking for