PIM Simple search is not retrieving existing items

I can query for items in Mtl_system_items_b. When I am querying for the same items using simple search in PIM Super user for the same organization, it shows no results found.
Please let me know what could be the reason for this.
Edited by: 924162 on Mar 28, 2012 9:55 PM

I had the same problem but rebuilding spotlight's index fixed the problem. I followed the instructions at
http://www.macobserver.com/tip/2006/07/21.1.shtml
Or Onyx can be used...

Similar Messages

Outlook 2007 instead search does not show the items which are actually present in the inbox and folders

Scenario:
when user search for any particular email item by using the sender name or subject name it does not show any result. At the same time it works fine when he specify the search folder(target folder) instead of searching it across all the folders/sub-folders.
1. We tried reconfiguring the outlook profile but this not fixed the issue.
2. It is specific to only few users but so far for all the others users it works fine.
3. Restarted the “Microsoft Exchange Indexer Service” but this is also not fixed the issue.
4. Hence the outlook reconfigure not worked, rebuild the search index not tried yet, but will give a try.

Hi,
Did the user select All Mail Items scope when searching in Outlook?
In addition, please make sure the user is not searching in a shared mailbox because in some configurations, you are limited to using the
Current Folder search scope when searching in a shared mailbox.
Please also let me know the result if you have tried rebuilding index.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can not Retrieve Send items on my E6-00

Hi,
I cant Retrieve Send items on of my Yahoo, Gmail on my E6-00. I have deleted my both the account and then again added them, but again no result........

Well, if you had backed them up on your old computer, and you can access that old computer...just copy the backup files onto the new one. If you hadn't backed them up, then sorry!!

Mail search not finding existing items

The simple Mail Search tool finds many things in the mailboxes, but misses more and more. When a search is being done within a given mailbox or folder, the search expands (sometimes unreliably) to go through all mailboxes/folders, when this was not desired.
Is the indexing not working? How can this be checked?
What are limits of indexing (number of messages, etc.)?
Mail is open for many hours/day, so time should be available.
Entire Mail Folder is now over 1.3 GB, too big to handle?

I had the same problem but rebuilding spotlight's index fixed the problem. I followed the instructions at
http://www.macobserver.com/tip/2006/07/21.1.shtml
Or Onyx can be used...

Simple Search is not working as expected

I am trying to execute code from the Brian "Bex" Heff book. The code is simple but I cannot figure out an error I'm getting. When I hit the search button I get following error.
A Runtime Error has occurred.
Do you with to Debug?
Line:1433
Error: 'document.QUERYTEXTCOMPONENTS.QueryBuilderQuery.disabled' is null or not an object
If I hit no I got the landing with with all the serach result. It seems like I not passing the querytext value to the next page.
Any idea on what is causing this?
We are on 10g.
hcst-advanced-search.hcst code.
<html>
<head>





<script language="JavaScript">

</script>
</head>


<h3 class=pageTitle>HCST Search Page</h3>
<form name="QUERYTEXTCOMPONENTS">
<input type=hidden name="QueryText" value="">
<table>
<tr>
<td align=right><span class=searchLabel>Title</span></td>
<td>
<input type="hidden" name="opSelected"
value="hasAsSubstring">
<input type="text" size=30 name="dDocTitle"
value="">
</td>
</tr>
<tr>
<td align=right><span class=searchLabel>Content ID</span></td>
<td>
<input type="hidden" name="opSelected"
value="hasAsSubstring">
<input type="text" size=30 name="dDocName" value="">
</td>
</tr>
<tr>
<td align=right><span class=searchLabel>
Release Date From</span></td>
<td align=left>
<input type="hidden" name="opSelected" Value="dateGE">
<input type="text" size=12 maxlength=20
name="dInDate" value="">
<span class=searchLabel>To</span>
<input type="hidden" name="opSelected" Value="dateLess">
<input type="text" size=12 maxlength=20
name="dInDate" value="">
</td>
</tr>
<tr>
<td align=right><span class=searchLabel>Full Text</span></td>
<td><input type="text" name="FullTextSearch" size=30></td>
</tr>
</table>
</form>


<form name="SEARCHFORM" method="GET" action="">
<input type=hidden name="IdcService" value="GET_SEARCH_RESULTS">
<input type=hidden name="urlTemplate" value="">
<input type=hidden name="QueryText" value="">
<input type=hidden name="ResultCount" value="5">
<table>
<tr>
<td><span class=searchLabel>Sort By:</span></td>
<td><select name="SortField">
<option selected value="dInDate">Release Date
<option value="dDocTitle">Title
<option value="Score">Score
</select>
</td>
<td><select name="SortOrder">
<option value="Asc">Ascending
<option selected value="Desc">Descending
</select>
</td>
<td>
<input type=submit value ="Search" onClick="submitFrm(false)">
</td>
</tr>
</table>
</form>

</body>
</html>
Edited by: user642006 on Apr 16, 2009 12:02 PM

Hi
I did not go through the complete code that you have put here.... but from the error "ent.QUERYTEXTCOMPONENTS.QueryBuilderQuery.disabled' is null or not an object it looks to me the js code for the querytextcomponents function is not initialised correctly. May just put a debug statement right before and after the code is called to see what value is being passed to this variable and check if thats the value you expect it to get.
Hope this helps
Thanks
Srinath

Turning roundup off...and not taxing an item

Hi I am running Pages '08 which I use for making invoices.
I notice that I cannot add a cell without it rounding it up. For example if I did 6.5 hours of work it rounds it up to 7. It also does this for taxes. It will round up 8.17% to 8.2. How do I turn this off?
Also, I need to bill for a reimbursement which I do not want to charge tax. Is there a simple way to not tax that item?
Thanks,
Gary

Set the number of decimal places to one or two, in the Tables Inspector.
To not charge tax, edit the formula to charge 0% tax.
Peter

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Personalized Simple Search with new messageLovInput - Search does not work

I have currently set an Message LOV Input into a Simple Search Panel for IcxPorRcvSrchPG.
I have got the LOV bringing back the correct values, but when I hit the GO button the Search does not work.
Can someome please help me on how I am able to get the search working in the Simple Search Panel.
Details of VO's are as follows:
xxReceiveItemsDueVO (extended from ReceiveItemsDueVO)
xxReceiveMyItemsVO (extended from ReceiveMyItemsVO )
xxReceivePurchaseItemsVO (extended from ReceivePurchaseItemsVO)
xxReceiveReqItemsVO (extended from ReceiveReqItemsVO)
Extended Attribute I am looking to search with is xxWono.
Current search items are working 100% with extended VO's, but when I try and search with new item, I am having no luck. The search is acting as though the new item has not even been created.
Additional Lov Details are as follows:
Level: Site
Item Style: Message Lov Input
ID: xxWONumSearch
Data Type: VARCHAR2
External LOV: /oracle/apps/icx/lov/webui/WorkOrderLovRN
Prompt: Work Order Number
Search Allowed: False
Search Criteria: False
Lov Map
ID: xxWipEntityName
Criteria Item: xxWONumSearch
LOV Region: WipEntityName
Programmatic Query: False
Required: False
Return Item: xxWONumSearch
Framework version: 11.5.10.6RUP
Is there a way of doing this through Personalization?
With the version of framework I am not able to add a simpleSearchMapping through Personalization.
Can someone please advise?
Thanks
Lee

When I generate and then view the help, it looks perfect! I changed the name of the project folder since the information is proprietary. I have several pictures including the parent folder and the only 3 folders that are generated. I cannot find the Webhelp output folder. I think this is what you need to see.

CCM 2.0 Simple search on CSE does not show any result

Hello guys,
I'm trying to search items by means of simple text search in CSE. Unfortunately, the system returns no result, though I can see the items by means of category search (that makes me thing that it's not a problem of views).
I search for a part of the description text (and Short Description is a searchable characteristic).
I regenerated TREX indexes with /CCM/RECREATE_INDEX report, but with no success.
Have you got any idea?
Thanks a lot!
Pierluigi

Hi Atul,
thanks for your support. Unfortunately, all the suggested notes are inapplicable:
Note 871302 - Unable to switch between catalogs using F4 help<b> --> Outside our issue</b>
Note 890967 - /CCM/CHECK_TREX shows incorrect document content<b> --> Covered by our SP Level</b>
Note 946185 - CCM20: /CCM/CHECK_TREX modifications<b> --> Covered by our SP Level</b>
Note 707781 - Product search does not find all documents<b> --> Outside our issue</b>
Note 723688 BBP TREX corrections for SRM 4.0 SP01<b> --> Outside our issue</b>
Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search<b> --> Covered by our SP Level</b>
Note 930788 - Search help for catalog does not display all catalogs<b> --> Outside our issue</b>
Note 1028343 Changes in the repository not reflected in Catalog UI<b> --> Outside our issue</b>
Note 1015201 - SRM-MDM Catalog 1.0 Patch02 Release Note<b> --> Outside our issue</b>
Note 487917 BADI implementation f. BBP_CATALOG_CONTENT (Troubleshooting) <b>--> Outside our issue</b>
Note 877131 Product category is not permitted for the user<b> --> Outside our issue</b>
Note 623067 SRM 2.0 Integrated Catalog does not display catalog info <b>--> Covered by our SP Level</b>
Thx again.
PD

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Every time I launch Firefox it pops up an error stating "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem."

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

Help I need help. i get this message'Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.' How do i fix this?

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
Well that is the message i get. I can still use firefox(version3.6.8)

You get that error if an extension is using an old and no longer supported method to install a plugin.
Which plugin are you trying to install?
See also http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

Why? Simple search of project title not possible

I do not understand why a simple search of the project titles or folders is not possible. Let alone not being able to use spotlight to search for photos within an aperture library. If I take all the time to keyword within aperture then it is useless outside the program. If I have multiple libraries I have to open each one to find the image that I am looking for. Very time consuming.
Any plugins or work-arounds for this?
I would pay money to have this.

Prasenjit,
I was about to post the solution. I discovered that component but the code did not even go to DO_PREPARE_OUTPUT.
The solution was to 'Disable Cookies' (marked this checkbox in the technical profile associated with the business role).
I got the idea to try this after I came across a method get_server_cookie that could not read the cookie previously set by set_server_cookie (to this extent I came to debug .

Problems searching for not existing index entries

Hi,
we are creating a Java Fat Client Application with JDK 1.5.0_07 and compliance level 1.4. The GUI bases on the SWT libraries.
The application ships with JavaHelp 2.0_02 (jh.jar).
The helpset is dynamically merged.
JavaHelp has problems e.g. during search for index entries, which does not exist. The JavaHelp Window does not react anymore. The rest of the application still works fine.
Has someone encountered similar problems, found the reason and propably a solution?
Thanks, Joerg.

Hi Mikkel
1) number attributes are only exposed in the complete search sample (search.jsp), not the others (usearch.jsp, tsearch.jsp, gsearch.jsp)
2) Your understanding of the binary encoding is correct, except wk_queryexp package does not handle binary encoding. This is because that package
is meant for 9.0.1 API, which only supports string attributes.
In 9.0.2 and beyond, the encoding of number, date attributes is done in the query API layer in Java, using
the Equals, GreaterThan, LessThan, Between query operators. Please take a look at search.jsp
and see how they are used. The compile() method of the query operators will encode the values for you.
Keep in mind that you should code your application to use the query API, as the encoding algorithm
may change in the future.
David

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

PIM Simple search is not retrieving existing items

Similar Messages

Maybe you are looking for