PING Process :: Checking App System availability from SAP R/3

Hi
Our requirement is to check Whether Application System is UP or DOWN before sending the data from SAP Server like Pinging the application system from SAP System.
We are using the Web Service as Target Application System & SAP R/3 as Source System now SAP R/3 will call one RFC ( like Z_Ping ) before calling any other RFC to send data to WebService. Following is the configuration -->
SAP R/3 -- Sender RFC Adapter -- SAP XI -- Rec SOAP Adapter -- App System ( Web Service )
Now can you tell me what is the appropraite way to do this, because in case of System Error ( in case when WebService is down or Server on which WS is installed is down ) XI is not receving any exception payload so no mapping is happening.
Though I created the " Error " xsd & used it as a Fault message but the mapping is not getting initiated.
Can you tell me how I can achieve this & suggest me the design specification.
Best Regards
- Lalit -

hey
u can do this using alerts,configure alerts so that it gets triggered whenever anythin wrong happens with Z_ping.and if response is negative then dont send subsequent messages.
alerts will always work irrespective of mapping.
but one thing is that triggering/not-triggering the subsequent message will be manual coz u need to check the alert before u send messages
thanx
ahmad
Message was edited by:
Ahmad

Similar Messages

How to access the ORACLE APPS table structures from SAP

Hi Experts,
How to access the ORACLE APPS table structures from SAP? Is it possible from SAP?
Thanks in advance
Thomas

Hi Silviya,
you can access this database using a technique called DB Multiconnect - sometimes written as multi-connect.
Search the SAP documentation and notes for this term and you will find how to do it.
Essentially you configure the remote database connection via transaction DBCON.
If your SAP system is not running on Oracle you will need to install the db-specific kernel files for Oracle along with the Oracel db client software - SQL*Net.
Then you can access the Oracle database from ABAP using native-SQL. It works a treat!
Cheers
Graham Robbo

System copy from SAP R/3 47x110 with Oracle 10.2 to Oracle 11.2

Hello,
I want to do a system copy from SAP R/3 4.7 Enterprise 47x110 with Oracle 10.2 to a new machine with same SAP version but with oracle 11.2. (After this I will upgrade to ERP 6.0)
I will do this with export/import but I don't find any documentation (manuals or notes).
I only find this:
Note 1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10
but this note is only for a new installation, I don't know if this work with system copy
Note 516246 - INST- System Copy for SAP Systems based on SAP Web AS 6.20
This don't have information about oracle 11.2
I read the manual "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20" but this also don't say nothing about oracle 11.2
Can you help me? Where can I find this documentation and what DVDs (master and kernel) should I use?
Best regards

Hi Juan,
Thanks for your answer.
That is my doubt, what installation master shoud I use for export oracle 10.2 and import in oracle 11.2?
Note "1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10" say that I can use installation master of R/3 4.7 Set 2 (47x200) to install a new system.
I found this media:
51033746_9 Installation Master 6.20/6.40 Linux on x86_64 64bit
and
51040087_7 NW 04 SR1 Inst. Mst. Linux x86_64 64bit f. Oracle 10.2/11.2
I think this is the note that I need:
Note 1478351 - Oracle 11g Support on UNIX: 6.40-Based SAP Systems

Hi. I clicked some snaps from my iphone and post that without copying it i restored the iphone with all apps etc available from the backup taken. How do i get back the photos which were clicked earlier. Is there a way to get it back?? Please help

Hi. I clicked some snaps from my iphone and post that without copying it i restored the iphone with all apps etc available from the backup taken. How do i get back the photos which were clicked earlier. Is there a way to get it back?? Please help

Yes i had not taken back up before restoring it. However i was just going through some links on the net and there is a software available for MAC to retrieve such lost data. But the point is will the said software work on iphone as the OS is not MAC..
Will have to give a try to this. If successful will share it with all. Anyone else has any idea about this please so share.

How to check the Idocs sent from SAP system

How to check the outbound Idocs sent from SAP system to target systems.
How to know the message types and target systems.

Hi,
In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS. Depending on different status you can differentiate them as Inbound or Outbound Idocs...
Cheers...
Santosh.
Mark All Usefull Answers...

Source System changes from SAP System to BI Warehouse on ECC activation

We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.

Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira,

PPPI - Process Management - activating standard settings from SAP

System data ECC 5.0
I am trying to use process message category PI_ORDCO. The destination is not assigned. I think the destination should be PI14. PI14 is not listed in the dropdown list.
My guess is the system does not have the current standard settings from SAP "activated". Please help with activating SAP predefined destinations, characteristics, categories, instructions, etc.
Thanks.
(moved by to what I hope is the appropriate forum to get an answer to this)
Message was edited by: Marilyn Pratt

Hi
Please try this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
Regards
- Atul

App update available from iTunes, but not from iOS ?

Found earlier today that one app had an update available on iTunes on my PC (Windows 7) ... while it wasn't available from the app store on my iPhone. The iOS app Store kept showing the old version of that app as the latest. Had to sync the iPhone with iTunes to transfer the update. How can that happen? ... and no my App Store app on iOS is not completely broken, as it keeps giving me updates for all other apps ... so far. Meaning that my Apple ID isn't a problem either.

On the iPod open the App Store app > Updates > Purchased then redownload. If nothoing shows make sure you are signed in with the same Apple ID that the purchase was made with:
Settings > iTunes & App Stores > Apple ID

Need to start a program in Oracle System (External) from sap program

Hi guys,
     I need to start a program in another oracle based system from sap program by writing native sql statements.
Does anyone have idea how to do this.
Rgds,
Ram

Hi,
Here is another sample for procedures.Kindly reward points by clicking the star on the left of reply,if it is useful.
Code Sample for writing a procedure with input and output parameters
REPORT zzz_jaytest.
* Getting the regno and total as input parameters
PARAMETERS : p_regno(10) TYPE c DEFAULT 'R1000',
                           p_total     TYPE i.
data : v_total type i.
* In this procedure, we are updating the total of a regno given as input.
* Here two parameters used in the procedure are input parameters.
* We are updating the record of regno entered in selection screen and
* adding the total entered to the already existing total. We have to give semicolon
* for the statement inside procedure.
exec sql.
CREATE or replace PROCEDURE PROC1 ( p_regno in char, p_total in number )
IS
    BEGIN
      UPDATE stu_det SET total = total + p_total where regno = p_regno;
    END;
endexec.
* This is the code to execute the procedure for update.
* While executing the procedure, the parameter variable should be
* preceded with colon :
EXEC SQL.
EXECUTE PROCEDURE PROC1 ( in :p_regno, in :p_total )
ENDEXEC.
* In this procedure, we are selecting the details for the regno entered
* as input. Here p_regno is input parameter and v_total is used as output
* parameter. So that we can use the retrieved value of v_total in our
* ABAP program
exec sql.
CREATE or replace PROCEDURE PROC2 (p_regno in char, v_total out char)
IS
    BEGIN
      select total into v_total from stu_det
                         where regno = p_regno;
    END;
endexec.
* This is the code to execute second procedure.
EXEC SQL.
EXECUTE PROCEDURE PROC2 ( in :p_regno, out :v_total )
ENDEXEC.
write : / 'Total of ', p_regno, ' is ', v_total.

How to find out what is Available from SAP ?

Experts,
i have to develop a data flow for one of the Data source, which is given by saP. I was wondering how do i find out the whole flow ? whcih DSO / cubes / MP /Queries are given from SAP for that DS ?
i have tried to look into BI content, but it only shows Info Area/Trans strecture and Info Objects...No cubes, DSO and other stuff.
In the BI content i did select " In data flow after and B4".
Also , i was looking at help.sap.com under BI content, but couldnt find .
i am tring to impliment data flow on "0EC_PCA_3".
Please help.
thanks

Hi,
Check the below thread for some more information related to infocube,
[0EC_PCA_3 - loading delta directly to CUBE?;
Regards,
Durgesh.

How to Detect System Availability from WD Application Integrator iView

Hey All -
I've created an WD ABAP iView using the wizard (SAP Web Dynpro iView template) to connect to SAP's SNC bolt-on module (Supplier Network Collaboration). The application is written in ABAP WD and I can connect to it rendering the application just fine by supplying the correct namespace and application name.
When I simulate SNC not being available for some reason (down), I do not get any kind of message - Just a blank iView. My user community would like a custom error message telling them that the "system is unavailable."
How do I accomplish this ?? In a nutshell - when I cannot access the application, how can I control what the user see's in the iView ? Do I need to create a custom template or what would be the best way to handle this. I assume this is a common question, but was unable to locate it.
Many thanks in Advance !!

Hi Christopher,
the WD ABAP iView will only display whatever the underlying system returns. Are you able to send back a message from the SNC system when it's unavailable? If not you would have to create a custom iView that can detect if the system is down and report it to the user. The iView could first check if the system us up and running and if so redirect the user to the application. If not it would display a message. Alternatively, you could have both in a page where the first one raises an event depending on the SNC system status. The WD app would subscribe to that event and react accordingly.
Hope this is of help.
Cheers,
Dion

Non sap system access from SAP

Hi,
I have to pick a file from non sap server to sap server , also i have to execute a software on non sap server .Please tell me the
steps .

Generic questions require generic answers:
> I have to pick a file from non sap server to sap server
Open explorer and copy the file.
> , also i have to execute a software on non sap server .Please tell me the steps .
Install the software and execute it.
Seriously, if you have a question be as specific as possible. We don't know anything about your environment so nobody can give you a suggestion what you can do to solve your issue. We have no operating system, no database, what kind of "file" that is, which data it contains, what kind of non-SAP software this is, how you want to execute it....
The more specific you are the higher is the possibility that someone had a likewise issue and has a suggestion.
Markus

How to automate the process of vendor invoice verificaiton from SAP

My client to scan the Invoice (once it is received from vendor), upload it in SAP, the User will look at the Invoice in SAP and then perform Invoice Verification in MIRO.
The Process mechanics is
1.Plant Manager will receive the Invoice physically by the vendor
2.Plant Manager then will fax the Invoice to a central location/Team
3.It gets scanned and gets uploaded in SAP
4.The Manager/FI folks will looked at this scanned copy and then perform
Inv. Verification.
After this i need to enhance the MIRO screen so that once PO or GR no will be entered,
then corresponding vendor invoice has to be displayed in same screen
Kindly can u give me approach to for the above requirement.
Thanks n regards,
Manjunath
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Nov 22, 2011 12:12 PM

any input...........

New book on Interaction Center available from SAP Press!

Congratulations, John!
I have checked the content, but I could not find anything about the web service tool. Is there a chapter about this tool?
Regards
AleX

Hello Mangesh,
Well, the book is quite a few years old now. I approached the publisher a couple of years ago about writing an updated version or addendum, but it wasn't something that they were interested in at the time. However, they do have a new acquisitions editor recently, so perhaps if enough people contact her with interest they might reconsider. Below is her info.
Katy Spencer
Acquisitions Editor, SAP PRESS
[email protected]
Phone +1.781.228.5070 Ext. 201
Warm regards,
John

HT1822 "Server app is available from the Mac App Store" ?

Has anyone been able to find Server app on the Mac App store? I need it for administering my other servers 10.4.11 and 10.7.4 from my new copy of Mavericks OS10.9 that came with my new MacBook Pro 15". I have not been able to find "Server app on the Mac App store" yet, maybe I am looking in the wrong place.
Rob

So much of seemless staggared upgrading of my Apple assets, hardware and or software.
I did read the artical and accept that I must upgrade all my assets at once to maintain a tight level of integration. Let me restate the question, "where on the Mac App site can I find the Server app", the product the second sentance of the first paragraph in the OS X Server (Mavericks) section of artical http://support.apple.com/kb/HT1822?viewlocale=en_US&locale=en_US refers to?
I was hoping someone that has had this issue before could point me to where the alleged "Server app" for Mavericks OS's can be obtained.
Rob

PING Process :: Checking App System availability from SAP R/3

Similar Messages

Maybe you are looking for