PL/SQL Page hangs in a Redirect Loop, after access from xdbconfig.xml

Hello
My Problem:
when i try to Access a PL/SQL Page, it seems that is in a redirect loop to himself.
In the Log File from $ORACLE_HOME/network/log/listener.log comes mass Messages from connects like:
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45720)) * handoff * http * 0
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45721)) * handoff * http * 0
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45722)) * handoff * http * 0
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45723)) * handoff * http * 0
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45724)) * handoff * http * 0
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45725)) * handoff * http * 0
26-FEB-2007 14:59:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=45726)) * handoff * http * 0
think the Problem is in the Configuration from mod_plsql.
When i try to access a PL/SQL Page through the Gateway, then it comes the same issue.
I can reconstruct the Problem on a fesh installed Database XE on Windows XP and on Linux.
After installation, i can Access the Login Page from APEX. The System works correct.
After i try to get the URL "http://127.0.0.1:8080/xdbconfig.xml" i get a Browser Login.
I typed in the System Account, then i can see the xdbconfig.xml.
After that i can't access APEX or any other PL/SQL Page
I can only access the XML DB Repository Directories.
Can someone help?
Thanks
Jan Hoelscher

I noticed the same issue with session info (after login in and then unlocking anonymous) still in the cookie or in memory (at least I think so).
After restarting the browser windows (all windows of the same "brand") - problem has disappeared

Similar Messages

SQL Developer hangs for a few minutes after being idle for a while.

Is anyone aware of any issues with SQL Developer hanging for several minutes after being idle for several hours? After being idle for several hours (and probably minimized), when we bring up SQL Developer we just get a blank white window for several minutes before it becomes functional. Obviously, this isn't a critical issue, but sure is annoying when you run into it.
Thanks in advance!!
Rob

This is fairly typical java application behaviour. For whatever reason, they are particularly prone to being swapped out by the operating system and take time to swap back in.
There is an add-in around called "keepresident" which helps this but I thought it had been superceded in later JDK version.

Logic referencing wrong apple loop after dragging from loop browser

(I am an X-Pro Tools Junkie) I am loving Logic.
I recently upgraded from Logic 7 on an old G4 to Logic 9 Studio on a MacBook Pro. I installed all my software and plugin’s fresh on the new machine. I opened up each projectindividually on my old machine and exporting the entire project and checked allthe boxes to copy all loops, audio files, settings, etc. to a new auxiliary hard drive. As a result,all my projects open up nicely on my new system.
I have a massive library of third party apple loopsincluding all 18 volumes of Drums On Demand. Also, I have the preferencechecked NOT to copy audio files to the session. Unfortunately, with thiscombination, when I drag and drop one of my Apple Loops into a project, ifthere is also a loop in the project folder of the same name, Logic isn’t referencingthe loop I am dragging, but the incorrect older one in the project folder. Thisis happening often, as Drums On Demand has a file naming system, so that theverse of each song-set is titled consistently, and so on. So if I have some drums in a project, and Iwant to try different drums, I have to physically copy them to the projectaudio folder, and then drag and drop from the finder, which simple isn’t asfun.
Any Ideas?
Apple, maybe you can fix this in your next update.

I was having a similar problem. I had taken some aif files and converted them successfully into blue apple loops that responded to my songs tempos. they showed up in the loop browser.
However the next day when I tried to convert more audio file, I couldn't repeat the procedure that I did the day before. I'm baffled as to what I did right and now am doing wrong. I even tried opening the Apple Loop utility directly from the Library folder. Its goes through the process of creating the loops, I get to adjust transients and all, but it does not show up in the loops menus when I look for it.

Adding web page in Adobe Muse that can be accessed from each web page

I have a disclaimer link at the footer of each of my web pages, I want it ot be accessed from each page. Where in Adobe Muse do I insert this page?

I'm new to Muse so two more questions for you all--
1. How do I add a drop down menu feature to my navigation menu to show the sub navigation?
2. How do I insert a Contact Form so that people can fill it out and send to us via email through our website?
Thanks!

Hangs in a continuous loop after installing apps from BB site

I installed an app from the BB download pages for my 8700 and the device could not restart but got hung up. The LED flashes red and the screen and hourglass cursor go on and off in a continuous loop. Removing and reinserting the battery does not help. It resumes the continuous loop. Who can help?

Something is broken in Blackberry Device filesystem that causes the problem.
Device in that condition is available for Blackberry Desktop Software for a very short period of time - when it starts.
Use JL_Cmder utility to wipe your device memory when the device is available for this short period of time.
It is not easy to catch the moment - but let's try.
After wipe - download the RIM OS here
and install it on your PC. After that - connect device to PC, run Blackberry Desktop Software to install OS to device.
If that does not help - bring your device to repair shop to wipe the device memory.
There is nothing broken on device hardware, it is a severe software failure.
Unfortunately RIM does not provide a hardware button to reset the device to factory settings.
Try this utility.
Hope this helps.

Web pages in Safari won't load after wake from sleep

After closing the screen or using the sleep command and then waking my MacBookPro 13" OsX Lion 2.4 Intel Core i5, Safari will not load pages unless I restart it.
How can I fixt this problem

Wake your computer by pressing the POWER button instead.
Let us know how it goes.

Safari Pages and Mail cannot be seen after awaking from sleep

If I leave Safari or Mail open, all of a sudden now when I come back and wake the computer from sleep, the programs are open, but the pages or mailboxes cannot be seen. New pages do not open. All that is seen is the menu bar, which seems to operate normally, but no inboxes or pages appear. I have to shut the computer down to get it to work again.
Any thoughts?

More info:
It seems to be the screen going to sleep, not the computer. When I come back and touch the mouse or the keyboard, as the screen lights up, there is a flash of the web pages I left up, then they vanish.
Yikes!!!

Portal SRA 7.1 - Redirect Loop

Hi,
sometimes (approx. 50% of connections) get a 'Redirect Loop' when accessing gateway after sucessful login.
Did anybody know how to solve this problem, please?
Other info from logs:
User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.8) Gecko/2009032713 Fedora/3.0.8-1.fc9 Firefox/3.0.8
Keep-Alive: 300
Connection: keep-alive
The difference in the logs are:
good connection in the: Gateway.toFromBrowser.0.0.log seems like:
GET HTTP/1.0
Allow: GET
GET /portal/dt HTTP/1.0
HTTP/1.0 200 OK
Server: Sun-Java-System/Application-Server
X-powered-by: Servlet/2.4
redirect loop problem log Gateway.toFromBrowser.0.0.log seems:
GET HTTP/1.0
Allow: GET
GET /portal/dt HTTP/1.0
HTTP/1.0 302 Moved Temporarily
Server: Redirector
Location: https://dgw.company.sk/http://dportal2.company.sk/amserver/UI/Login?gw=dgw.company.sk&org=dc%3Dcompany%2Cdc%3Dsk&goto=http://dportal2.company.sk/portal/dt
Content-Length: 292
Content-Type: text/html/html
Connection: Keep-Alive
Keep-Alive: timeout=50,max=6
GET /amserver/UI/Login?gw=dgw.company.sk&org=dc%3Dcompany%2Cdc%3Dsk&goto=http://dportal2.company.sk/portal/dt HTTP/1.0
<message>Response sent back to Browser:
HTTP/1.0 302 Moved Temporarily
Server: Sun-Java-System/Application-Server
Date: Wed, 15 Apr 2009 13:08:30 GMT
Content-type: text/html
X-powered-by: Servlet/2.4
Cache-control: private
Expires: 0
X-dsameversion: 7.1 patch 126357-01
Am_client_type: genericHTML
Content-Length: 0
Connection: Keep-Alive
Keep-Alive: timeout=50,max=7
Location: https://dgw.company.sk/http://dportal2.company.sk/portal/dt
And again the same:
GET /portal/dt HTTP/1.0
HTTP/1.0 302 Moved Temporarily
This continues 10 times both GET /portal/dt HTTP/1.0 and GET /amserver/UI/Login?gw=dgw.company.sk...
and than firefox and IE failed with redirect loop.
My configuration is:
2 x AS 8.2 with AM 7.1, Portal and SRA Gateways in the two non-global zones. AM with session failover and Portals are both in their own domain1 (non-cluster, non-portlet failover) with SRA Gateways configured on the different virtual IP and aliases.
JDK: 11866*-19
JavaDB: 125246-03
Cacao: 12389*-10
MQ: 12506*-05
AS: 124673-10
PS: 124302-12

You can also try adding the host you are trying to access to "URLs to which User Session Cookie is Forwarded" under Secure Remote Access --> Profiles in psconsole.

HT6114 Reboot loop after 10.9.2 upgrade

My 2009 (dual-quad) Mac Pro 4,1 is now stuck in a reboot loop after upgrading from 10.9.1 to 10.9.2.
//edit: I realized there wasn't a question: What is wrong with my computer and how do I fix it?
So far I have tried:
* Repairing the disk
* Repairing permissions
* Zapping the NVRAM/PRAM
* Resetting SMC
* Copying BootCache.playlist from a backup to /var/db
Other things to note about my setup:
In addition to the original hard drive, I installed a 4tb drive from which I have been working with since June. It is the 4tb drive that has 10.9.2 installed. The original 650gb still has 10.8.4 installed and all my original data pre-June.
Also installed is a VisionTek Radeon 7870 video card which powers my numerous monitors. I do not recall having to install anything extra, or modify any settings to get it to work. The only downside is you can't really see anything when booting.
In addition to the VisionTek card I also have one of the factory Geforce 120 cards installed. Using another monitor attached to that card I've been able to monitor the boot process using the command-v verbose output.
Of notable interest I get the dreaded "BootCache: unable to open /var/db/BootCache.playlist : 2" error, along with a few SMC errors. If these are important I can attach pictures taken of the boot process.
I am able to zap the NVRAM and boot the old 10.8.4 650gb drive. It loads fine. 10.9.2 will not boot into safe mode, but will boot into recovery mode.
As a final attempt to fix the BootCache error I copied it from a Time Machine backup into /var/db/ ensuring the correct permissions were set. After rebooting the file is deleted again.
I would greatly appreciate any help on this issue as this is my work computer. I do have full backups via Time Machine so I can reinstall, but I'm hoping there's another solution.

I just started a discussiion related to this topic in "Mac Pro."
https://discussions.apple.com/message/25019730#25019730
" I have a 2009 dual quad core Mac Pro (4.1) with an upgraded Radeon 7950 GPU. I use a 30" Apple Cinema display (DVI) and a 27" LED Cinema Display (Display Port). After updating to 10.9.2, the Mac would not boot, but went on a continuous re-boot cycle every 5-10 minutes without a flicker of life in either display. I unplugged both displays and the Mac booted. I could log in remotely from my laptop. I then attached the 30" Cinema Display into the DVI port and the Mac booted normally."
Dave

Redirection loop detected while opening Exchange 2007 mailboxes through Exchange 2013 OWA page

Team, in our infra Exchange 2013 CU8 & Exchange 2007 SP3 RU15 running. Exchange 2013 recently deployed but while opening exchange 2007 users mailbox through 2013 OWA getting error "Redirection loop detected". Want to update you few things :
Public DNS record created as mail.myinfra.in with x.x.x.2 IP and legacy.myinfra.in with x.x.x.3 IP.
Virtual directory modified mail.myinfra.in for 2013 & legacy.myinfra.in for 2007.
All the OWA request need to pass through public DNS only no internal DNS record for OWA.
Through ISA already rule created and tested also like https://mail.myinfra.in/owa giving me 2013 OWA page & https://legacy.myinfra.in/owa giving 2007 owa page. Only problem while opening https://mail.myinfra.in/owa with 2013 mailbox id/pwd working fine
but with 2007 mailbox id/pwd giving error "Redirection loop detected".
Appreciate if you can help quickly.

Hello
tip: check iis log on both of exch servers and check owa application haven't got "HTTP redirect" enabled.
sorry my english

Infinite Redirect Loop when selecting group in Google Groups

When I sign in to Google groups, then select one of my groups, I get into an "infinite redirect loop." The page hangs, "Redirecting" appears in the page title, and at the bottom it says (alternating) "waiting for google.com" or "waiting for groups.google.com". I have Firefox 3.6.3, which I think is latest and greatest.
This problem has been reported to Google and you can see the discussion here:
http://groups.google.com/group/is-something-broken/browse_thread/thread/8fb760742f6ce7ba/f7065d7bd3499f65#f7065d7bd3499f65
You go to the Google Groups help forum, look at "Is something broken" discussion, and look further for "Infinite Redirect Loop." This may be a problem that only affects moderators.
I'm not sure if this is a problem with Firefox, Google groups, or the interaction.
== URL of affected sites ==
http://groups.google.com/

Clearing out all cookies worked for me, too.
Not that it matters, but my tentative conclusion is that (a) this is a Google problem and (b) it has something to do with cookies, possibly a defective cookie creation mechanism or something like that. In any event, if it doesn't recur, I would further conclude that whatever-it-was has been fixed.

AD FS - KB3003381 causes redirect loop on login

Hi,
I'm using AD FS 2.1 for SSO (2 IIS sites and several WCF services) but my users have been seeing redirect loops when they try to login. Once the user's browser recognises the loop and interrupts it, they are able to either resubmit the request with a page
refresh (depending on the browser) or navigate to the URL of the site and they are logged in, but this is not a good workaround. We are using SecurEnvoy for 2FA.
This behaviour started shortly after KB3003381 was applied to the production environment, and I have replicated the behaviour on our staging environment. Removing this patch from the staging environment causes the login mechanism to behave normally.
From Fiddler, once users have authenticated successfully using SecurEnvoy, they are directed to
https://<AD FS proxy URL>/adfs/ls/?wa=wsignin1.0&wtrealm=<site URL>&wctx=rm%3d0%26id%3dpassive%26ru%3d%252f&wct=<UTC timestamp>
which results in a 302 redirect to
https://<AD FS proxy URL>/adfs/ls/auth/basic/?wa=wsignin1.0&wtrealm=<site URL>&wctx=rm%3d0%26id%3dpassive%26ru%3d%252f&wct=<UTC timestamp>
This should return a 200, but instead returns a 302 redirect to the same URL, until stopped by the browser.

It seems that you have already asked in another forum: http://serverfault.com/questions/658095/adfs-2-1-redirect-loop-on-login
Simply remove the installed update and contact Microsoft to report the issue: http://support.microsoft.com/ContactUs
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

JSF Web Application - endless redirecting loop

I've created a simple JSF WebApplication, just one page, one static text. When I deploy it to the bundled server, everything is OK. When I deploy it to a remote server, that I have access to (Sun Java System Application Server Enterprise Edition 8.1_02), and I browse to its URL (http://server:port//Webapplication), the browser shows me an error. IE just displays Page cannot be displayed error, Firefox tells me, that the app. ended up in a redirection loop.
When I browse to /Webapplication/faces/Page1.jsp, everything is ok.
What can be wrong?

Hello
We are looking at doing the same thing (iviews in Sharepoint)
Any luck in solving the problem ?
thank you
Robin

Muse mobile site has a redirect loop in my subdomain

I have an existing site which I am working on redoing in Muse, but I wanted to get a mobile version up immediately. I got it working, tests out fine in preview and BC, but after uploading it to a subdomain (m.junebugjam.com) I keep getting a redirect loop with smartphone and tablets. Desktop views it fine, so I know it's something in whatever Adobe uses to detect mobile users. Currently, I just have .htaccess redirecting to BC, but I would prefer to be using my own domain (not too fond of the "Report Abuse" button.)
Site is: www.junebugjam.com
Sub is: m.junebugjam.com
Thanks in advance for the assistance.
-Scott

So your desktop and mobile versions are on different hosts? If so you need to add the redirect script to your desktop page if on mobile and you need to direct it to the mobile domain. It looks to me like you have also created the mobile layout in the desktop view in Muse?

E-Business to Apex Authentication Problem - Redirection Loop?

Hi Folks,
I have a couple of EBS (11i) environments which successfully launch Apex Functions using the whitepaper delivered from Cabot Consulting (Extending Oracle Applications). I have created a new responsibility, menu and function on our live environment today which does exactly what the whitepaper suggests:
1. Send a cookie to the browser with Username and a generated hash.
2. Apex authentication checks for this cookie and if it does not exist, displays a login page.
3. IF the cookie exists, it takes the username and validates the hash, redirecting then to Page 1 of my application.
However, I have found that the first time the EBS function is clicked, Firefox throws a "Redirect Loop Error", Internet Explorer instead gives an unhelpful 404 error. If I click my back button to get back into Oracle Applications and click the function again, this time it works.
I can't release this to my userbase if there is a chance of redirect issues!
Has anyone had experience of this and is there a verified solution to resolve the issue? I am happy to post whichever code you wish.
Many thanks,
Pete

Hi Scott,
Your suggestion answered my question first time. My login page was not public for some reason!
I've changed this now and kerching, my applications all work a breeze!
Fantastic - so simple :-)
Many thanks.
Srini - thanks for the suggestion, I've read every bit of EBS integration I could find so this is a bit of an RTFM!
P

PL/SQL Page hangs in a Redirect Loop, after access from xdbconfig.xml

Similar Messages

Maybe you are looking for