Plan Vs Actual report in PS

Gurus,
New in SAP PS module, appreciate your advice on the PS Plan Vs Actual cost reporting.
What kind of standard extractor should we use in order to extract the Plan cost entered in PS?
What kind of standard extractor shoud we use in order to extract the Plan cost enter?
I would assum that we need to have to InfoCube where one will keep the actual and one will keep the plan cost?
Then we build the multiprovider on top of this in order to report the Plan Vs Actual.
Kindly advice, thanks!

If I recall correctly, you can use 0PS_C04.
This cube contains actuals, plan, commitments...
Take a look at the business content for  this.

Similar Messages

  • Is there standard report for planned and actual devlivery date?

    Hi Guru,
    Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
    I wonder, Is there standard report for planned and actual delivery date?
    or I have to create a customizing report.
    Thank you very much.

    hi
    i dont think it is possible to see both in one pan so try to create some Z report
    u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
    regards
    kunal

  • Planned vs Actual Cost Report (with variance) for PM Orders

    Hi Experts,
    We are using the project system to collate order costs for annual shut work.  We have a requirement for a report to show 25% variance between planned and actual order costs (maintneance order).
    At this stage, we dont mind whether this is implemented in the the PM system, or the PS system.
    This is a fairly basic / common requirment.  Are there any standard transactions we could use to:
    1.  Select a list of orders using standard selection criteria.
    2.  Select a % for variance, e.g. 25%
    3.  Display a list of orders where the planned vs actual costs were greater than 25% and what the actual variance is for each order?
    Thanks,
    Maikel

    Hi Maikel,
                   I have never seen any such scenario, but the best thing that can come to me is for the shut down activities you muct have created a Revision, then based on that Revision you can take a dump of all the orders with Planned and Actual Cost, in the excel, and there by putting the formulae you can definitely have the Varience report.
    Hope it helps you.
    Regards,
    Yawar Khan

  • Planned vs actual production report

    Hi,
    Which report is used for planned vs actual production information.
    Rajesh

    Hi
    COOIS will give all the standard order relating to production order. You can get the data in required way, by giving propoer input to the system through the front end screen
    Regards
    J.Saravan

  • Report S_PL0_86000029 - Plan Vs Actual

    Hello Experts,
    I have successfully  uploaded the plan through GP12N manually monthwise .
    When I run the report  S_PL0_86000029 , I do get the values GL account wise, only issue is, I am getting these values cumulative. That is if I run report from May  2011 to May 2011, I am getting cumulative plan vlaues (& actuals as well)  that is for April 2011 and May 2011.
    If I want ot see monthwise vlaues for plan vs actual what should I do?
    Please advise.
    Regards
    Shailesh

    I think you can only start it on a monthly base, individually.
    Regards
    Hein

  • PLANNED V/S ACTUAL REPORT

    Through MRP i got detailed list of planned orders in a period and actual production is different,which is simplest way to analyse to see plan vs actual report

    Vikas,
    You can use Shop floor information system. In this you could get the planned order qty. Along with that you will get the actuals against the planned.
    Some of the transactions are MCP3, MCRE, MCP7, MCP1.
    For cost comparison between actuals and planned use:
    S_ALR_87013127
    Hope this is useful.
    Regards
    Ram

  • Function module for calculating planned and actual cost of production order

    Hi ,
    Do we have any standard function module for calculating planned and actual cost for production order?
    i need to implement this in a Z-report.
    Thanks
    Srini

    Hi,
    try below function module
    CRMCO_GET_PLAN_ACTUAL_COSTS
    CO_IH_GET_PLANNED_COSTS_TOTAL
    Regards,
    Sankaran

  • Plan and Actual at WBS Elements without activities

    Hi Experts,
      I am in need of a small help from you. My scenario is like this:
    I have equipments/material as WBS Elements( Level1,2...). I have no activities/materials.
    I planned the costs using CJ40 and Budgeted using CJ30 and confirmed all the WBS Elements by entering actual dates for the same.
    Now i want to see planned/actuals costs in report. When i checked in one standard report it is showing 0 for both planned and actuals.
    I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement.
    Can anyone please help me in this regard.
    Thanks in advance.
    Regards,
    Suresh.D.

    The following is in answer to
    "I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement."
    Most probable scenario would consist of following steps
    Create PDef - Create WBS (either copying from template or manually) - Plan costs - Roll up planned costs - Budget (at top level) - Budget distribute - budget Release - WBS release - Post actual costs - run cost / revenue variance report - settle costs against the WBS - TECO project - Close Project.
    I believe I haven't missed on any important aspect.
    Would appreciate inputs from others in this effort.
    Hope this information was useful.
    Regards,
    Pradyumna

  • Line item actuals report for Profit center group

    I am looking for a Line Item Actuals report for a Profit Center Group  on the lines of KSB 1 report for Cost center /groups.
    I tried report "KE5Z but only profit centers can be selected, not profit center groups.
    Any help on this

    Try out the following report
    S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance
    Call up Actual line items, here we go you would get the profit center group reports in similar lines as KSB1.
    Award points so as to say thanks.
    Regards,
    Suraj

  • Planned delivery cost report

    Dear Experts ,
    Is there any report showa planned delivery cost per P.O in SAP R/3  ???
    Rrgards

    I do not think so that there are planned edelivery costs and actual delivery costs in sap.the frieght entered in PO termed to be planned and will get captured in MIGO with FRIR.During LIV you may enter the actual delivery cost sent by vendor and which also posted to the GL to balance the FR posted during the MIGO and if there exists a diff in GR,IR you may need to for MR11.
    there is one term unplanned delivery cost during MIRO .
    There is no std report for capturing delivery costs per PO. Rather you may need use table for vonditions FRC1 may be KONP.
    You can plan to delvelop a report which takes the posted frieght during MIGO and MIRO through GLs and compare for planned and actual posting of delivery costs.
    Regards,

  • Planned and actual consumption for each confirmation

    Dear All,
    There is a production order. it has two operations. i have made three confirmations of each operation for that order. now i want to see the planned and actual consumption for each confirmation. how is it possible.
    However i know that on order we can see planned and actual consumption but it is for total order but i want to see planned and actual consumption for each confirmation. Actually client wants that on 2nd confirmation what is planned consumption and what they consumed on actual. thanks

    Hi,
            In standard SAP this type of report not be there, but u can make it by using BOM,Confirmation table, & material document table.
    Use AFRU to get posted document no for confirmation & detail by joining it with MSEG by mblnr & MAZHR.
    now u get plan component qty by using mast & stpo if ur bom not changed in Production order , if in order component may be change then use afko & resb table & by comparing base qty or order qty & confirmation qty get plan component qty for confirmation.
    Thanks
    Rakesh

  • Planned and Actual costs at the Activity level

    Hi all,
          Can you tell me if there is a R/3 report which lists out the planned and actual costs for a project and displays it for each network and activity? I want these values at the activity level.
          I found a report which lists out these values for each network, but I cannot drilldown to the activity level. Please help.
    Thanks,
    Satyajit.

    Hi,
    There is setting in network type. Please go through transaction OPUV  i.e.
    Change view- Network type paramaeters : overview " Overview.
    Uner Network type parameters there is one radio button in front of ActvtyAcctAssgn. Just activate it.
    Hope this helps.
    Regards
    Tushar

  • Confirmation planned and actual time

    Hi All,
    I am doing operation confirmatio by CO11N with milestone confirmation. While confirmation system giving planned time base on production quantity and here i have enter the actual time required.
    Is there any report which will give planned and actual time of confirmation?
    Regards
    Rajesh

    hi
    thanks...
    is there any report which suffices the same.
    Regards
    rajesh

  • How to differentiate b/w Plan and actual data

    Hi,
    How to differentiate b/w plan nad actual data.
    Is that value type or Version InfoObject??
    What should be the value for that and how it gets populated ??
    Regards,

    Hello Tapan,
    The plan and actual data is differentiated on the basis of value of infoobject 0VTYPE. Value 10 is for actual. Different plan versions can be differentiated by different values of infoobject 0VERSION.
    These values are populated when actual data is loaded or plan data is entered.
    Hope it helps.
    Regards,
    Praveen

  • Best practice for Plan and actual data

    Hello, what is the best practice for Plan and actual data?  should they both be in the same app or different?
    Thanks.

    Hi Zack,
    It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
    Hope this helps.

Maybe you are looking for

  • Como cadastrar o Plano de Contas Referencial SPED Contábil na OB58

    Olá pessoal Estou criando uma nova estrutura do balanço na transação OB58 para atender o plano de contas referencial do SPED Contábil. Entendo que devo configurar toda a hierarquia do plano de contas referencial e após isso atribuir as contas contábe

  • Possible to stream movies from external HD- Airport Extreme- AppleTV?

    Hi Folks, I'm new to these boards so 'hi'. I have looked all over Google and various other forums for this answer but haven't received anything definitive. I'm basically trying to find out if it's possible for me to connect an external hard drive to

  • Can't download the latest update for iTunes

    Hi, I tried to download the sofware update for itunes 10.6.3 for my MacBook Pro, but as soon as the download begins, it stops and I get an error message saying: "The update 'iTunes' can't be installed", and also "The update could not be verified..."

  • Hebrew language support

    How can I add Hebrew language support for iPhone?

  • Servlet Filter uri-pattern

    Hello! I need to do the following: - apply a servlet-filter to all files in a directory - NOT apply that filter to the sub-derictories. I'm using Tomcat 5.5. What should be the uri-pattern of that filter? Is there some directive for "Exclude"? Thanks