Planned Order Does not exist

my Stocks and requirements list shows an MRP element of DEPreq for a element data (halb part number). Double clicking on the element I see the pegged requirement part number and planned order. However. SAP says the planned order does not exist nor does the pegged requirement. I can trace upwards in stocks requirement to another part number. the Data element says DIRECT PRODUCTION. but again there is no requirement for that part nor can i get to the planned order for it either, SAP says it does not exist.
These are related part numbers which I suspect may have come from a common Bill of material; but there is no demand for the high level material but yet I have low level componenets in my Stock and requiremnts.
Is this a table inconsistency issue?
thanks in advance

Hi Borries,
Please go thru link below. This also could help enhance your knowledge in planned order.
http://help.sap.com/saphelp_nw04/helpdata/en/c1/376535449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5b/ae39704b8611d182ba0000e829fbfe/frameset.htm
rgds,
nanthakumar

Similar Messages

Error of PO - "Purchase Order Does not exists"

Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!

there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

Receiving Error in Shopping Cart : Order Does not exist

Hi
While creating Shopping Cart and click Insert From Clipboard button, I am receiving " Order xxxx does not exist (Item yyy ).
Please tell me why I receive this error and what causes and possible fixes to this?
Details:
The scenario I am doing is I have a webdynpro ABAP application which copies Value, Cost Center, OR Cost objects in to Clipboard.
now when I go to Shopping card - > descrive requirment -> Cost assignment section-click Insert From ClipBoard - throws below error: "Order xxxxxx does not exist (Item yyyy)"
Indeed OR cost objects which are valid in the SRM system and every OR line is seen as invalid by SAP with above error message. Please explain
Thanks
Praveen
Edited by: Praveen kumar Kadi on Jun 21, 2011 9:16 AM

Hi,
Thnaks for your reply.
Actually manual copy To clipboard works fine from Shopping Cart. when we use webdynpro application to copt to Cliboard with same data it doesn't work. So I believe the key to debug SRM Shopping Cart-> CopyToClipBoard functionality like how the values have been copied to from shopping cart. So that we can compare Shopping Cart->CopyToClipboard value with Webdynpro CopyToClipBoard values.
How to find what and which values and in which format copied from shopping Cart-CopyToCliboard.? Anyway to see this in debug.
Please help with some screenshots/debug screens.
thanks
Praveen

Re: Order does not exist

Hi Gurus,
Good afternoon to all,
i created a cost center and profit center in quality server but when i am posting fb50 the system is saying an error of Order (name) does not exist.
if anybody face the same problem give me your inputs.
thanks in advance & points will be assign for the useful answers,
KK.

Creation of cost centre:
Path: Accounting  Controlling  Cost centre accounting  Master data  Cost centre  Individual processing  Create (T. Code KS01)
Cost centre: Dept A
Valid from: 01.04.2006 to 31.12.9999
Enter
Name: Dept A
Depart Cost centre: Department A
Person responsible: A
Cost centre category: 1 (Production)
Hierarchy area: XXXXHIER
Business area: XXXX
Currency: INR
Save (or) (Ctrl + s)
Ignore the warning message, press enter
Creation of Cost centre group:
Path: Accounting  controlling  Cost centre Accounting  Master data  Cost centre group  Create (T. Code KSH1)
Cost centre group: XXXXProdu
Enter
XXXXProdu u2013 Production department for Co. area XXX
Select insert cost centre button (Shift + F4)
Give the cost centre: Dept A, Dept B
Save
Regards
Surya

40000006573 purchase order does not exist

hi
40000005673 purchase order does not exist

true, it doesn't exist in my system either...
Please spend a LITTLE more time on your..question if you expect help
if I had to support you in this case the first thing I would do would be to double check that the number you entering is correct
me23n
migo
If you know the number is correct and you get the same error from both t-code I would believe the message
if the number may be incorrect search for the correct number with me2n, many options to refreence for P.O. search with me2n

Order does not exist??

HI all,
I have a situation where I have approx 180 docs posted in FI, but I am unable to reverse because the Internal order on the FI docs does not exist. The docs were posted via idocs and came through automatically. I am unable to change the order field in FB02 either....please can someone help me correct this issue???

There is no field for changing order in document change rule.
Make the intenal order field as non mandatory

Unable to delete Order does not exist in live cache but in table POSMAPN

Hi Experts,
We are facing an issue where purchase order is not available in live cache (which means no GUID) but exists in database table POSMAPN. We have tried to delete it using standard SAP inconsistent order deletion program and also using BAPI BAPI_POSRVAPS_DELMULTI but not able to delete it.
Can anybody suggest a method by which we can get rid of this order from the system.
Thanks a lot.
Best Regards,
Chandan

Hi Chandan,
Apologize me for taking your question in a wrong perspective. If you want to delete the same then you need to Re-CIF the order from ECC so that it would come and sit in Live Cache. Once done, try using the BAPI.
If you are not successful with the above approach try running the consistency report /SAPAPO/SDRQCR21 in APO system
so that it first corrects the inconsistency between ECC and APO (Live Cache + DB tables) and then use the BAPI to delete the PO.
Not sure if you have tried this way. If this does not solve your purpose you need to check SAP Notes.
Thanks,
Babu Kilari

Planned order does not schedule as per Recipe

Hello,
I am working on ECC 6.0 at client site & need your help.
The recipe with all the relationship between various phases/ operations well defined has a total production time of around 2 months.
As the client wants planned order to read recipe lead time rather than material master lead time, we are running lead time scheduling while running MRP.
However it seems that system is not reading the Recipe relationship (sequencing) between operations. Have checked the config settings & they seem fine. So in the planner order all operations are starting on same date ( instead of 1 operation after another ) & lead time in planned order is around 2-3 days. The same planned order when converted to PRocess order does read recipe lead time & schedules for 2 months as per recipe. So do not see any issue with Recipe master.
I remember that in earlier versions like R/3 4.7 at other clients, Planned order did schedule correctly.
Can you please check in your SAP system if Planned orders read Recipe correctly & schedule correctly as per lead time( when MRP runs with lead time scheduling). I am suspecting if it is a bug in ECC 6.0.
Thanks in advance. Helpful answers will be awarded.
Ram

Hi,
Cehck The scehduling formulas, and Relations ship which you are maintaining check the sequence.
In Material master SMK, and inhouse production.
These settings to be check.
Thnks and regards
E.Rambabu

COGI Error-Sales Order Stock does not exist

there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
what might be the problem?
how can i fix this?
could anyone help plz

hi
as your scenario is MTO , when you run MRP for sale order all the componnets under finished product will get DEP req against the sale order,
so at the time of goods issue system check the stock for a component agaisnt the sale order. even the stock is vaible in unrestricted.
1.check for the component when you run MRP system might generated Purchase req(in case external procurment) or planned order(in case both procuremtn) you need to procure ord produce , so when you do GR for them stock will be against the sale order.
or
2.you can bring sale order stock by doing MB1B - using movement type 411 E.(transfering stock Unresticte stock to sale order stock)
-ashok

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

Error message BP does not exist while creating service order in WEB UI

Hi Experts,
i have an issue while creating a service order in WEB UI the system is automatically taking the BP ""created By"" but while saving the document Error message showing "BP does not exist"
we have already completed set up integration with HR .created the user as BP Role "employee"
Kindly suggest what are the other configuration that need to be checked.
Regards,
D Panda

Hi,
Have you made the assignment of the user (defaulting in created by) to the employee (under the identification tab in employee)?
Regards,
Parul

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Planned Order Does not exist

Similar Messages

Maybe you are looking for