Planner not able to see Business rule

Hi There,
The issue here is ,we have attached some business rules to a form on "ON save" and through business rule security ,have given access to a planner user but with Planner login ,the he is not able to see that business rule attched with that form.i have checked with admin login ,it is visible.
Any idea why this is happening?

Have you added validate and launch access to the business rules for that user? If yes try restarting the services.
Also try removing and adding again the user with validate and launch access.
Try checking are you able to view BR under administration-> Business rules from the Planner's id ?

Similar Messages

Planner not able to see business rules

Hi,
I have given planner access to a user. And i have added validate and launch access to the business rule for that user. But after that when i login to worspace with that user i am not able to see the business rules.
Any idea why is this happening?

1. Have you added the location, in location tab?
2. Are you able to see rules under Tools->BusinessRules?
3. Is Admin is able to view rule?
Cheers..!!!

Not able to see Master Rule Collection

hi Experts,
I m creating Portal Desktop by following one PDF, According to that PDF i created defulat framwork page and portal theme after that desktop and i have created one rule collection after that in desktop i have assigned default framwork and theme,
but in last step i m not able to see Master Rule collection .
Portal Content > Portal Administrators > Super Administrators > Master Rule Collection.
how m able to see this and what r the other steps required for creating desktop.
Thanks and regards
Trilochan

In your Rule you "Add IF Expression"
IF -> User = * -> Button Apply
Then -> Portal desktop = <Your Desktop PCD> -> Button Apply
In Main Rule "Add IF Expression" (No Delete de default configuration)
IF -> User = <Your User> -> Button Apply
Then -> Rule Collection = <Your Rule PCD> ->Button Apply
OBS: Take Care of this configuration. First Check this with your user (Not use the Administrator User), if everythink ok, Than you change for a determinate group, user, role.....
Regards
Eduardo
Edited by: Eduardo Grilo on Oct 23, 2008 1:21 PM
Edited by: Eduardo Grilo on Oct 23, 2008 1:23 PM

HI not able to see business content in sap bi7.0

Hi GUru's,
We have upgraded from BW to BI 7.0 recently,
but we are not able to see any business content objects like
0sd_co1.predefined objects in rsa1 screen
Can anyone please help me out.

Hi Venkat,
did u check it out for the BI component.
check in your sys..........
menu -
> system----
> status.
If itz not there try to install the BI component.
Regards,
Vijay.

Not able to see business area in some fi doc

hi ,
In some FI doc for inventory g/l account in which direct posting is not allowed does not display business area however we can able to see business area in corresponding migo document . how to avoid this .
Thanks and Regards ,
Shikha

HI
Take that Inventory GL accont and open it in FS00 and check what field status used
And open that FS group in OBC4 then double click on Additional account assignments then make business area as optional entry and try
Thanks
Vishnu

Not able to invoke business rules from BPM

Hi,
I have a simple business rule (Used Bank class in Alias and created a simple rule set) and able to invoke successfully from webdynpro application.
But the problem comes when I try to run the same webdynpro application (as a part of BPM process) from UWL, it always throws ClassNotFoundException for Bank Class.
The thing is that I'm able to run webdynpro application properly (and is doesnt throw error) as standalone but when I run the same application from UWL (I have binded UI to BPM process), it throws class not found error.
Thanks for your time and help.
Best Regards,
Shiva

Hi Shiva,
sorry to bother but how did you integrate the rule in the BPM? I'm trying to use a rule as automated activity but I'm unable to create the Webservice from the rule...
kind regards,
Matthias

Cannot see Business Rules in Planning

Hi,
I am not able to see business rules in Hyperion Workspace 11.1.2.1. I have provided access to the admin group and assigned the BR to the correct planning applications and planning server.
I am able to view them in EAS but in Planning, i am unable to do so.
Any idea what i am missing?

I take it you have recycling the services to rule out a communication issue, if so have you checked the logs for any errors.
Also it is worth having a read of the following Oracle Support doc - "Hyperion Business Rules Visibility Within Hyperion Planning [ID 1110438.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Users cannot see business rules

Hi All,
good morning.
I ma having strange problem with business rules.
I migrated my business rules from version 9.0 to 9.3.1.
only admin was able to see business rules.
I tried to add access to all users but when the users are not visible in users list.
Checked shared services they are provisioned as users.
refreshed users list....no use.
I ran out my options.
can anyone help me out
thanks in advance.

HI
There are many options so ill give you some:
verify that the users/groups have “planner” & “basic user “ role in HSS.
Verify that you define “planning location on the HBR”
if you giving access based on groups try to see what happened if you give the access to the user and not the group and specific HBR.
Try stop\start planning web, AAS and RMI services.
I hope it will help you.
AE

I could not able to see Imported Business Package

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Michael
For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
After doing this i transported my BP

Not able to see the Business systems

Dear Experts,
Thanks for you support and help.
I have created as per the below sequence for both sender and receiver types wherever necessary
1. Software Product
2. Software Component -
3.Technical System - (Third party )
4. Business system (Sender and Receiver)
http://wiki.sdn.sap.com/wiki/display/XI/CopyofFLATFILETOFLATFILE
imported the software compnent in IR and created Data Types, Message types etc and tested, it is working good.
I have created a Configuration Scenario, and tried to assign the business system in "Service Without Party", i was not able to see both the sender and receiver Business Systems which were already created and getting an error : service :Business systems not found
Do i need to change anything while creating Product, SW Component, Third Party Technical System and Busniess System..etc
Regards
Blue

Hi,
I think u r bussiness system is alredy assign to other scenario.If u assigned once it will not show in the list.U have to import the bussiness system not assign.In ID select 'Objects' it will show all the Bussiness system details.Selet u r business system and add to u r scenario.
Also refesh cache objects using SXI_CACHE and refesh obeject in ID.
In ID Go to ENVIRONMENT->select Clear SLD Cache
Then refresh the all objects.
Thanks
Ravi

Business Intelligence folder not able to see,

Hi All,
I have installed the Enterprise Portal 7.0. only on server. I am trying the intergation of the BI system in portal. I am not able to see the "Business Intelligence" folder under Portal Content>Portal Content(brower)>Content Provided by SAP>platform_add_ons>
I have not installed the BI system with portal. I have installed JAVA BI system with ABAP BI (I want to integrate the BI in portal which is installed on different host). Please help me to resolve this issue.
Thanks,
Shambo

Hi,
Thanks for quick reply. Actually I have installed the ABAP+BI JAVA. With this by default the EP is installed. But I want to integrate the BI system in EP server installed on different host.
I am following the same procedure which I get in SDN.Please help me to resolve this.
Thanks,
Shambo

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Could not able to see my customized BP after Importing

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Sanjay,
There is no need to delete the Standard BP from PCD/Migrated Content.
After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
Hope this is of some help. Do write back in case you need further clarification
Cheers
Ruchi.

Planner not able to see Business rule

Similar Messages

Maybe you are looking for