Not able to see Master Rule Collection

hi Experts,
I m creating Portal Desktop by following one PDF, According to that PDF i created defulat framwork page and portal theme after that desktop and i have created one rule collection after that in desktop i have assigned default framwork and theme,
but in last step i m not able to see Master Rule collection .
Portal Content > Portal Administrators > Super Administrators > Master Rule Collection.
how m able to see this and what r the other steps required for creating desktop.
Thanks and regards
Trilochan

In your Rule you "Add IF Expression"
IF -> User = * -> Button Apply
Then -> Portal desktop = <Your Desktop PCD> -> Button Apply
In Main Rule "Add IF Expression" (No Delete de default configuration)
IF -> User = <Your User> -> Button Apply
Then -> Rule Collection = <Your Rule PCD> ->Button Apply
OBS: Take Care of this configuration. First Check this with your user (Not use the Administrator User), if everythink ok, Than you change for a determinate group, user, role.....
Regards
Eduardo
Edited by: Eduardo Grilo on Oct 23, 2008 1:21 PM
Edited by: Eduardo Grilo on Oct 23, 2008 1:23 PM

Similar Messages

Planner not able to see Business rule

Hi There,
The issue here is ,we have attached some business rules to a form on "ON save" and through business rule security ,have given access to a planner user but with Planner login ,the he is not able to see that business rule attched with that form.i have checked with admin login ,it is visible.
Any idea why this is happening?

Have you added validate and launch access to the business rules for that user? If yes try restarting the services.
Also try removing and adding again the user with validate and launch access.
Try checking are you able to view BR under administration-> Business rules from the Planner's id ?

Planner not able to see business rules

Hi,
I have given planner access to a user. And i have added validate and launch access to the business rule for that user. But after that when i login to worspace with that user i am not able to see the business rules.
Any idea why is this happening?

1. Have you added the location, in location tab?
2. Are you able to see rules under Tools->BusinessRules?
3. Is Admin is able to view rule?
Cheers..!!!

Not able to see specific tags for FSCM Credit Management on BP master data screen

Hi All,
I have already set up Collections & Dispute Management,
I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any specific tag on BP Master data related to Credit management, (just as I can see "Collections profile" tag, in reference to Coll. Mngmt).
So, I am not able to see these tags yet: "Credit profile", "Credit worthiness", "Cresit limit and control".....under Credit Management BP role!
What am I missing there? Have I got to activate BAdi UKM_R3_ACTIVATE in order to be able to "see" those BP tags???
....Or what else?
I will reward with points if someone can provide me any hint about this issue.
Thanks a lot.

Hi Pallavi,
Many thanks for your quick response. However, I have not succeeded in seeing that tab.
Let me tell you, I may be confused by a document I downloaded from internet about the BP master data views (as for the FSCM Credit Management role, of course) . Please find below the commented tag. It is an imaged I copy to you from that document I told you, for you to see which tag I am talking about:
I don´t know the content of that tab...but I would like to see it in place....you know..
Now, I checked you last answer and I saw that everything was already set by factory, please find below:
BUS4 view:
BUS5 view:
However, I´m still not able to see the tab I told you at the beginning (first image). Am I confused about something here? Many thanks for your patience (these things happens when you set FSCM Credit Management for the first time).
Is that tag accesible?
Many thanks!
Wilson

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Master Data Loaded but not able to see.

Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
Many requests are available showing number of records Transferred and Updated.
What could be the possible reason?

Hi Sarabjit,
Welcome to SDN!!
You need to load the transaction data into the Info-provider to see the contents and not just the master data.
In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
Bye
Dinesh

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

Could not able to see Subcontracting PO in ME2O requirement list.

Dear Experts,
I have a subcontracting PO with Account assiged to the Project. I know as we can not use the 541 O Movement type to provide the components to the to the Sub contracting vendor when the PO is account assined to the Project. But my requirement is only to see My subcontracting PO (Account assigned to Project) in ME2O requirement list. Based on the requirement list I will transfer my stock to vendor sloc with 311q Movt type.
I have created the PO but could not able to see in ME2O, is anything I have missed to maintain in config or in some othe rplace.
Regards,
Cherry K

Hi Cherryk,
In case of subcontracting PO with account assignment for Project, components are directly withdrawn from the project stock at the time of the goods receipt. But if you want to withdraw the components from the stock of material provided to vendor then you can set the collective requirement field in Material Master MRP4 view as Collective requirements only (2), then you can use ME2O.
The collective requirement field has to be set for the components to be provided.
Regards
Chandra Shekhar
Edited by: Chandra Shekhar Singh on Jun 2, 2011 10:05 PM

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see the tree on the jspx page after running

Hi All,
This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
After running the jspx when I am moving to the fragment I am not able to see the tree.
However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
Can anybody put some thoughts on this.
Thanx
Kanika

Thnx for your replies..
I am dropping taskflow as region . I am not using the switcher component.
On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
Please advice how to accompolish this now??

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Users not able to see remote users on the node network

Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
     a) an alias that can be resolved on the network with either DNS or local
     host files
     b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.

See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards

Preference Processing: Not able to see PO in Manage Vendor Declaration

Hello All,
I have completed below activities for Preference Processing
1) Material transferred from Feeder to GTS
2) Material Prices & Procurement indicators transferred to GTS
3) BOM Transferred to GTS
4) Material and all BOM item classified
5) Preference indicators and LTVD details are maintained in Product master in GTS
Now I have create a PO for Raw material and the PO is transferred to GTS but i am not able to see the PO in path /SAPSLL/MENU_LEGAL --> Risk Management --> Preference Processing --> Manage Vendor - Based Vendor Declaration --> Display worklist.
Have i missed any configuration?
Awaiting for positive reply
Thanks & Regards
Rahul

It doesn't sound as much that you missed something as it does you'd done one step too many.
In step 5 where you say you have maintained preference/ltvd status in the MM; that's why you wouldn't be seeing your PO listed under 2014 in pref processing. Since you've already manually maintained it's status, you've basically bypassed the need for that PO this year.
If you change the year in Preference Processing however, you should see your PO listed for the FTO in question for 2015. Without the manually maintained material status in place, this material/vendor combination should be relelvant for request with the year pushed out.
Thanks,

Not able to see all the records thru RSA3.

Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
Geetha

Hi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK

Not able to see Master Rule Collection

Similar Messages

Maybe you are looking for