Planning hierarchy created for wrong plant: cannot delete.

Hi,
Planning hierarchy (mc61) got created for wrong plant for info structure S976. I deleted the materials from the list (mc59). But I cannot delete the wrong plant.
Thus, I am not able to create the new plant for that particualr info structure and asisgn the materials to that plant.
How do I delete it?
Thnx,
Abhi.

Closing

Similar Messages

Planned order creation for another plant

I have 3 plants 1, 2 and 3.
I receive forecast in plant 1. Convert it to PIR in plant 1, and run MRP for plant1.
Plant 2 is the supplier plant for Plant 1, but it is not manufacturing.
Plant 3 is the production plant which supplies to plant 2 and plant 2 gives to plant 1.
How can i automatically create planned orders in both plant 2 and plant 3 directly from plant 1 through MRP.
Also I need to do this without Special Procurement type.
Regards
Krishnaraj

I receive forecast in plant 1. Convert it to PIR in plant 1, and run MRP for plant1.
Plant 2 is the supplier plant for Plant 1, but it is not manufacturing.
Plant 3 is the production plant which supplies to plant 2 and plant 2 gives to plant 1.
How can i automatically create planned orders in both plant 2 and plant 3 directly from plant 1 through MRP.
As Told by Mario you have to achieve this through SPK only in Std SAP. You have to create to one new SPK for each plant (1 & 2 plant).
Say for Plant one Create SPK 41 Stock Transfer from plant 2. Under Special procurement header select
Special procurement - U
Plant - 0002
Procurement type - F
For Plant two Create SPK 42 Stock Transfer from plant 3. Under Special procurement header select
Special procurement - U
Plant - 0003
Procurement type - F
No when you will give the demand for 0001 plant & run the MRP demand will be flown till 0003 Plant through STO.
If have any query plz come back.

No Planned order created for semi finished

Hello PP Experts,
I have a semifinished material which is used for several materials and everywhere it works fine, hence a planned order is created, except for one material.
I have checked pretty much every entry for differences on this material. The only difference I found is that the Indicator: recursiveness allowed was set.
Do you think this might be the reason why no planned order is created ?
I tried to unflag the recursiveness indicator and saved the bom. But the update latest forever and finally the whole update service got stuck.
Thus I deleted the indicator on the database, but still no planned order was created. Not sure though which checks are behind that field.
Thanks for any ideas!

I have checked pretty much every entry for differences on this material. The only difference I found is that the Indicator: recursiveness allowed was set.
Did you compare the entries table wise? STPO for the working bom and the bom with problem with same material.
Make sure in BOM >> item detail >> status/long texts
Bulk is not checked
Material provision indicator is not entered.
Also check if the production order type of problematic one is different. If yes check setting in OPL8 and the field Reservation/Purch. Req.

Sales order checks stock and auto planned ord created for shortage quantity

Hi,
I have a requirement like, when I create a Sales order, it should check for the available stock. If stock exists, the delivery could be done using the stock. But if stock is less or partially available then, a planned order should be created automatically of the shortage quantity. Please guide

Yes strategy 40 will work for the first part, but if stock are not there, then how to get Planned orders with reference to Sales order? Infact as i wrote before, we can get that as well using MD50 MRP run, but the process order has non valuated GR, the price for FG is zero. Can you help me with that, to get a valuated Goods receipt for the Finished product?
You can check your self, in the Documented Goods list of Process order, the non valuated material marked "X"

Plan order created for Outbound delivery

Hi Gurus,
For some materials, When MRP is run it generates plan order for Outbound material with same qty as that of outbound delivery.
What setting should be done as not to generate plan order for outbound delivery.
thnx in advance.

Hi,
There is nothing in message control tab for outbound parameter(we20) and even there are multiple changes in delivery.
What we do is as soon as the delivery is created . Z trnx is executed which changes the dec whse status A(Relevent ) to B (distribution) simulteneously outbound Idoc is created and delivery details send to whse.
Normally there will be one outbound idoc per delivery , but in this case there are 2 (duplicate)

IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.

Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra

I'm finding Ios7 exceeding frustrating having to spend hours reinstalling and looking for last data. For example I cannot delete photos I have synced, applications are missing. Where can I get clear instructions to fix the mess?

Where can I get clear instructions to clean up a mess that Ios7 has made of my data and info on my iPad. I can't delete photos, apps are missing, it's crazy and so frustrating. I have spent hours on this.

How did the photos get onto your iPad ? If they were synced from a computer then they can't be deleted directly in the iPad's Photos app - instead they are deleted by not including them in your next photo sync from your computer's iTunes.
For your apps, as long as they are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app on your iPad, and via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes. If you had backed up to your computer's iTunes before starting the update then you could redownload them to your computer's iTunes and then retry restoring to your backup and see if that copies the apps and their content back (the actual apps aren't included in a backup, just their content/settings, so for a restore to work fully you need to have the relevant apps in the Apps part of your library).

Smart Playlist I've Created for Podcasts I cannot get to show on Touch

any ideas please ? I'm sure I had no problems ages back before OS 3.x but now I can't get a smart playlist for podcasts I've created to show up on my Touch
bascially the smart playlist is:
Media Kind is Podcast
Date added is in last 2 days
Live updating (off)
and in Windows/Itunes works perfectly, does exactly what it should - shows all podcasts added in last 2 days
on Ipod Touch - Smart Playlist will not show
worked perfectly with OS 2.XX I'm sure
thanks, Mark.

Hi,
It looks like this thread: http://discussions.apple.com/thread.jspa?threadID=2322231 is discussing the same issue.
There are also some tips in the the thread that may help workaround the issue, like adding the Playlist is Music rule.
-Jason

Creating a Standard Info Record for multiple plants

We did some clean up in info records the other day and marked some old/incomplete info records for deletion down at the PO organizational data level (EINE). This went fine; however, now when we go to create another info record using the same info record number (because material and vendor is the same), but for a different plant (will be a separate entry in the EINE table), SAP automatically marks it for deletion because the previous entry is marked for deletion.
The one consistent thing I have noticed is that the old incomplete info record originally marked for deletion had a purchasing document attached to it. The document along with document date carried through the additional info records we tried to create for different plants.
Can someone tell me the reason this happens? Also, what can we do to prevent this? I would think you could have an info record marked for deletion in plant 1, and have a valid one for plant 2??

This is a program bug, please see OSS Note 742405 - Creating purchasing info record with deletion indicator

Rotated a picture went into savingbeen in savings for 3days cannot delete or get to my other photos iphone 5s question need help

question; on i pnone 5s rotated a photo in my photos been in saving mode for 3 days cannot delete or cancel also can't get to any more of my pics

Reset the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot and release the problem you are experiencing.

Purchase requisitions are not created for Component by MRP

Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
Murugesan

Hi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan

Reference MIC require to be use for Multiple Plants

Hi All,
I have created 2 characteristics and asigned it to one class hence with reference of that i have created MICs for Plant X.
Accordingly i have assinged those MICs to inspection plan which are cretaed for Plant X.
After get done result recording and UD , values get copied to batch classification and its working fine.
Now the problem is that perticular class we are using for another class also (i.e Plant : Y) , because same process is happening in Plant X as well as in Plant Y.
I have created new inpection plan for Plant Y also sepratly and Material assignment also done.
For Plant Y , this scenario not working , results not gets copied to batch classification
As per starndard i can create only 1 MIC against 1 Reference.
Please advise how same refernce MIC would be work for another plant (i.e Y).
Thanks,
Abhishek

Hi,
MICs are generally created for one plant but they can be used in inspection plans of different plants. I don't understand where is the gap in this discussion. Pl share if I missed out something.
Second view could be like this. You have a MIC, let say Quality, which is used in both plants but you want it to get linked with different characteristics (Char 1 for X and Char 2 for Y). If that's the scenario, then yes, you would need to create this MIC for Y also and link with second characteristics.
Frankly saying, I couldn't understand the real issue here. Is master data the issue or updating of batch master ??
Also check the following path
QCC0>Basic settings> Maintain setting at plant level> Choose Plant Y> InsLot Completion. Make sure Batch valuation is set on.
Additionally, Pl rephrase the following statement,
Now the problem is that perticular class we are using for another class also (i.e Plant : Y)
ntn

Created date of Plant view

Hello everybody, I need to know when all the materials of our database were created for each plant. In MARA we have a date, but not in MARC. Thanks.

Hi
If You want the date of material creation - Use T code IH09
MM50 - List Extended Materials for Material Creation Date
you can also get the data from the table MSTA
Regards
Anand

Import PO for different plants having diff. excise group

Dear All ,
How to capture & post the Excise Duty for an Import PO ,
Where the PO is created for different plants .The plants have
different excise groups.
Regards
R B Panda

The only way to do it is to assign a small notional value (like 0.01 USD) to the item, so that the conditions tab does not disappear.
The only problem will be that the GR/IR clearing account will have an open entry, which can be cleared via MR11 with minimum accounting impact.
Regards,
Aroop

MRP Run for Multiple plants

Hi Guys:
IN SAP R/3
My client has requirement to merge planning of material for multiple plants and run the MRP under one head plant.
For example:
Plant : 1000, 1001, 1002, where plant 1000 is a head plant who had authorization to perform MRP run.
if I run MRP Sepeartely:Each plant has below requirement for one material number (M1)
Plant 1000 : 3 EA
Plant 1001 : 2 EA
Plant 1002 : 5 EA
Instead of running MRP per plant, my client needs to run MRP for multiple Plants that Consolidate total requirement for all plants.
and generate PR--->PO , In the PO, M1 should be delivered to 3 different plant locations by vendor and Po Will be issued from Head Plant 1000?
Is there any Report in SAP , Where MRP Controller can See Requirements from Different Plants @ Central Purchasing level after one Multi Plant MRP run, So that he can decide on how much to allocate to each plant?
Thanks for help
Thanks
Sweth

Hi,
If u want to perform the MRP in one plant for all the plant requirement is depends on the bussiness process.
You can try the following scenario:
Planning in one plant nd production in other plant - Respective master data and special procurement have to maintain.For
further clarity please follow the below link
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm.
We can evaluate the PR and PO by providing the authorisation object for the multiple plant to the respective users.
Revert me back in case of clarification.
Thanks
P.Srinivasan

Planning hierarchy created for wrong plant: cannot delete.

Similar Messages

Maybe you are looking for