Planning question metadata set vs. group

Trying to figure out if I should just stay with a single metadata set and then multiple metadata groups.
For example, say there are two different assets b-roll and finished shows. (neither are uploaded from projects but one at a time as single clips)
While they are "different" assets (in some minds) they are still basic QT movies.
The difference will be during the upload, they will have different data entry fields. B-roll will have the shooter, location fields while the finished show will have director and rights fields. I will need to create different metadata groups to do that, but is there any real reason to make different metadata sets?

If you use 1 single Metadata Set you'll have both groups in the same asset regardless of the clip type and you might have some issues with users filling up the wrong group or so. If you use 2 metadata sets AND 2 groups you can separate both types of clips so there's no confusion and you'll see and will be able to catalog only the right group for that asset. You can also have more control on the permissions for both types since you can filter trait permissions, asset filter and production filter depending on the metadata set (you cannot do that with groups)
Best regards

Similar Messages

Improper set up group updation in planned order

Hi,
In Master recipe we assign set up group to the set up phase i.e. phase 20 (Superior operation 10). Same is transfered to APO PDS.
In APO Planned orde normal strcture of order is operation 10- Setup group displayed. Operation 20 Set up group displayed.
For one particular product we are unable to see any set up group for operation 10.
Any help for this
Regards,
Santosh

Besides Stick's suggestion, make sure that the plan is a "Production" plan.
Also see the "Release Time Fence" section on http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/inv/mrpattr.htm
Also see http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/mrp/planco03.htm
Hope this helps,
Sandeep Gandhi

Backup question - presets, metadata sets ?

What do I need to backup to ensure that my metadata sets, and other presets are backed up in the event of a hard disk failure ? I presume these are not included in the vault.
Paul

You should be backing up your boot drive on a regular basis. The vault is for backing up the Library. A remote FW800 drive and SuperDuper as a backup management program is a good way to go. eSATA would be 5%-10% faster, but require an internal card.
Jeff

Removing default Metadata set

I am creating very specific metadata fields, groups and sets for one of our clients. however, i cannot seem to delete the custom Metadata Sets, for example: 'Show' has no relevance to us, but I can create new sets fine. Please if anyone knows how to do this or know a good workaround, any help will be much appreciated.
thanks

Sure, FCSvr is highly customisable.
Having the default metadata there gives one options, you don't have to use it all. Only the admin should ever see it if setup correctly. You see it, ignore it and move on.
Or, I may be misunderstanding your question. Are the end users seeing a field you don't want them to?
I know you can delete certain fields - but backup your database first.
Even deleting a seemingly useless (to some deployments) metadata group such as Documents, can totally wreck the database.
You can install a custom metadata set which will require a lot of work to build from scratch. If you do want to go that route it will take many man hours to construct database fields, lookups, sets, etc.
Good luck.

Question about setting cookies and custom authentication

I have a question about setting cookies.
I have two different 'projects' in HTMLDB - we will call them App1 and App2.
I also have two different connection configurations setup in the DADs.conf file. - we will call them Connect1 and Connect2.
App1 is setup to use database authentication (no user is specified in the DAD) and uses Connect1. Once the user successfully logs in, we set a username cookie (this is a persistent connection).
We created a custom authenticatoin scheme for App2 - this scheme checks for the username cookie (set by App1). We would like for App2 to use Connect2 (HTMLDB_PUBLIC_USER is the default user specified and it uses connection pooling).
Is it possible to set a cookie from App1, Connect1 for App2, Connect2 - then redirect to App2 and pick up that cookie?
Here is an example of what we are trying to accomplish:
A user loggs into App1, we set a cookie, and the user is redirected to App2. If the cookie exists, we allow them access to the home page in App2, if no cookie, we redirect back to a 'Login Failed' page in App1. We don't want App2 to use the same database connection as App1 though, we need App2 to use connection pooling.
Is this possible? OR...Is there a better way to accomplish what we want to do?
This is an enhancement to an existing app. Our requirements are to use Database Authentication (setup where pass expires after 60 days or so, cannot reuse last 3 passwords, etc.) - which is already setup and being used by other applications in our organization. All of our users have accounts in the database. We don't want users to have a new username/pass - and we don't want to manage a separate group for HTMLDB apps.
The existing application uses HTMLDB's built in authentication - which uses database username/pass, and it uses connection pooling, but we cannot handle the pass expire stuff in it, unless there's something we're not seeing or understanding - at least that's how our DBA explained it to us.
Any help with this will be appreciated so much. I can send you the code we have if needed.
Thanks!

Same problem here. I have so many problems with this remote app. Is there an iTunes API? I would like to write my own remote app that actually works.

When I upload a single file into a production in FCS I can access all the fields in the metadata set, when I upload a batch of files, I can only access a partial number of fields in the metadata set. Does anyone know why this happens?

When I upload a single file into a production in FCS, I can access all the fields in a metadata set. When I upload a batch of files into the same production in FCS, I can all access part of the fields in the metadata set. Does anyone know why this happens?

dredcomm,
Great answer, and it led me to where to solve the problem. In the field definition screen there is a category drop down list. If you choose something other than none from the category drop down list then that field won't appear in the list of fields when you attempt to batch import a group of files.
Thanks,
Dave

Creating a response requires a metadata set?

Perhaps I've mucked this up but for somereason I am now required to specify a metadata set when I try to create a response. Any required fields of md groups are also required. The admin guide screen shots do not show this as required. Any ideas on why my installation is requiring it? and how to get rid of it.
I'm running FCS 1.5.2 on OS Server.
I see it under multiple accounts.
Thanks

After poking around, found that on several custom metadata groups that were provided by FCSvr in the window, I had for some reason added the Subscription Response() metadata set.
Must have done this in testing phase.
Does anyone know why this might be useful?
Thanks

Set persistent group

I'm trying to setup a share on my Snow Leopard server that always sets the group of a file or folder to "acct" whenever one is created with the group's permissions set to read/write.
The shared drive is installed in the Xserve (the Xserve is running Snow Leopard 10.6.1). The volume name is "Accounting" and I want the whole thing shared with the "acct" group. I have already created the group and added users to it.
I went into Server Admin and:
1. selected the "File Sharing" service icon at the top
2. highlighted the "Accounting" drive listed under Volumes
3. clicked the "Share" button
4. selected the "Permissions" tab and added the "acct" group under ACL to allow Read & Write with "Applies To" set as "This folder, Child folders, Child files, All descendants"
5. set the group under POSIX to "acct" and allowed "Read & Write". It does not appear that the "Applies To" under POSIX can be set to anything other than the default "This folder" setting. Also under POSIX I left the owner as "root" (that was the default) with read/write, but changed "Others" to "No Access".
I believe I am on the right path because every file and folder that gets created on it has the group set to "acct"; however, the permissions do not get set to rw- for the group. Instead, no matter what I try, the group permissions come out r-x for folders and r-- for files.
Is there a way to set the permissions to always be rw- for the group for all files and folders created in the future?
Thanks in advance for any help. Also, feel free to RTFM-me with the name of the documentation and page number if it is in the documentation and I simply have missed it.

Hi,
Setup groups are used in the Production Planning and Detailed Scheduling in SAP APO as mentioned below :-
For single resources the setup group characterizes the setup status required for processing an operation.
The system can use a setup matrix during detailed scheduling to adjust the setup time for an operation according to the sequence of operations or during setup optimization to define the optimal sequence of operations. Setup keys are used to provide a more detailed classification of setup statuses within a setup group.
For multiresources the setup group characterizes any particular characteristic of an operation, for example, the temperature at which an operation is carried out. The system can synchronize operations with the same characteristic and the same duration, that is, it can plan them simultaneously on one resource.
Setup group and setup matrix in APO are location dependant.
/sapapo/cdpsc6 -> selection of setup groups
/sapapo/cdpsc7 -> Select setup matrix
Hope this is will help.

I need script which will filter a set of groups by name, and then give a CSV with direct members

I need script which will filter a set of groups by name, and then give a CSV with direct members
say it like,
$groupitems = Get-ADGroup -SearchBase "DC=fincaint,DC=local" -Filter {Name -like "*AppUsers"}
ForEach ($groupitem in $groupitems)
        IF ($groupitem.objectClass -eq 'user')
   Get-ADUser $groupitem | FT Name, Email, City, Title | Export-Csv c:\member.csv
      IF ($groupitem.objectClass -eq 'group')
   Get-ADgroup $groupitem | FT GroupName, GroupDN | Export-Csv c:\member.csv

Hi Dhiravia,
It's been a while. How is it going? If the suggestion provided by ThmsRynr doesn't help, for scripting questions, in order to get better help, it's recommended that we ask for advice in the following scripting forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365

not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365?
Any idea?

after few days test in my lab, I can see that only email enabled group can be added as site collection admin using POWERSHELL.
hope this helps who stuck like me!! :-)

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

I see there is no way to change the security questions i set up when I first purchased my ipod touch. Software takes you in circles with no help

I see there is no way to change the security questions i set up when I first purchased my ipod touch. All the answers I get do not work. Can't by another device until I get around this issue.

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

How can I set up group contacts on my IPad Air?

HOw can I set up group contacts on my IPad Air?

I Don't know if you can or not.
but you could try one if these 2 things:
-under a new contact in name type the names of the people. Next, I'm not sure if this will work, but for phone just put a different hone down.
-Also tou could just make a group message. In messages just type all the names in the to field after you tap compose.

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

How to set up Group Policy without any server installed

How to set up Group Policy on Win8 without any server installed?
I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

Hello,
a Domain requires at least one Windows server OS machine which has Active Directory installed.
As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
"The common point would be my PC (Admin PC) ."
This machine can not be used for your needs with software installation for 50 computers.
"How To Use the Group Policy Editor to Manage Local Computer Policy."
This is about the local machine and you cannot manage them for other computers from your Admin PC.
"DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
NO, this is NOT a domain.
http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Planning question metadata set vs. group

Similar Messages

Maybe you are looking for