Planning Setup Application

Hi, i?ve just install Planning and i?m trying to do the Setup Application. But in the moment i press the "Finish" button, this message is shown:- IHspAppAssistanceACM_SaveAppAssistant() Error Unable to create application Error Number: -2147160060And in the event viewer the message is:- DCOM got error "Overlapped I/O operation is in progress. " and was unable to logon PC3\UsrDcom in order to run the server:{C96424A2-D46F-11D2-B067-E805B6000000} Does someone knows what could be the reson?Thanks for any help.

Yeah, we got this one. Can't remember exactly what it was but some things to check are:-the user has local admin rights-the UDL is correct-is essbase runningHope this helps.

Similar Messages

Email setup application v. 6.11.0419 freezes 9330

I went to update the email setup application on my new 9330 and throughout the update, it prompted me several times with the message: ? is also used by "Email Setup Application." If you proceed "Email setup application" may cease to function properly. Proceed? I don't know what the ? preceding the beginning of the statement means. After I clicked on this several times throughout the update it finally updated and prompted for a restart. I restarted and the phone filled up the status bar and froze. Even after I removed and replaced the battery several times. I got the phone to unfreeze finally but I won't update the email installer again until this problem is worked out. Anyone know what the deal is?

this worked for me
NOTE: The following workaround is intended for BlackBerry smartphones running BlackBerry 6 OS only. To determine the operating system version, select Options > Device > About Device Versions on the BlackBerry. Performing the following workaround on OS versions other than BlackBerry 6 may cause the Email Accounts/Set-up application to become unusable. If this happens, a reload of the BlackBerry device software may be required. Please see KB03621 for steps for reload the BlackBerry device software.
On BlackBerry smartphones running BlackBerry 6 only with a BlackBerry Internet Browsing enabled data plan:
Download and install a new BlackBerry Internet Service Email Accounts/Set-up Application by navigating to the following URL using the web browser on the BlackBerry device: http://<brand>.blackberry.com/rest/EmailClient/
Note: <brand> corresponds to the carrier BIS brand name. e.g. (Verizon = vzw, ATT = mycingular, Rogers = rogers) The BlackBerry smartphone user may need to contact their mobile carrier technical support to obtain the value to substitute for <brand> in the URL as it is different for each carrier.
Taken from
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB26055

Email Setup Application for my Curve 8330

I recently updated the desk top to the current verison. Under applications it shows email setup application required, but it will not let me set it up. Does anyone have any ideas on what I need to do?
Thanks

So what happens when you click on that icon?
Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Email setup application/BBmaps

I recently upgraded my wireless plan to allow access to BIS and email. In the past I deleted the email setup application and BBmaps to free up device memory. Now that I have the data package, I want to use my device to compose email, but withuot the setup application I can only compose and save to draft. I wiped my handheld with Jl_cmder and re-installed my OS, I still have no email setup application or BBmaps. I also attempted to install v4.2 OS so that I can do an OTA install of BBMaps and the email, but when I connect to DM, it says no device software available. What can I do next?

download the latest OS for your device, and install it to windows
use desktop manager to sinatll the OS to your device
when the software selection screen comes up, scroll down and put a check mark in email setup and bbmaps
if you dont have DTM installed and dont want to you can use this instead to load the OS to your device
http://na.blackberry.com/eng/update/

Email Setup Application Does Not Work After Update

I seem to be having the same problem as others with the email setup application.
When I updated my Blackberry to the new OS6, I went to my email setup and it said "looking for updates"
It finds a new update from my already installed email setup app 6.0.0 to the new 6.11.0419.0755.
When I click "download" it says replace existing version? I click "yes"
The it says: "com.rim.bis.client" contains a different version of module "net_rim_bis_client" which is also used by email setup application. If you proceed, "email setup application" may cease to function properly. proceed?
If I click "yes proceed" it crashes my blackberry and it will not reboot and I have to do a complete hard reboot, wipe the device and reload everything from my backup on blackberry desktop.
If I click "no" not to proceed, I cannot open the email setup application.
I have tried downgrading to version 5 of the OS, I have rebooted with a battery pull, crashed my blackberry twice and spent hours reloading all my applications and systems. I am at the end of my rope, and I don't know what else to do?!
If there was a way to turn off the automatic search for updates on my device under the setup and email settings, i think I would be able to set it up in the older version 6.0.0
HELP.

yep same problem here
i had this problem and got a replacement handset.
i have had to do an update and got the same issue yet again.
The funny thing is, is when i got my new handset i had to run the email setup application and it worked fine.
now its failed and i have to boot in safe mode and wipe etc.
Will someone sort this out???!! O2, Blackberry whoever. Shambles!

Email Setup application is not working on my device Blackberry Curve 9320

Dear Sir/Madam: I am unable to set up email using Email Setup application on my device. However I can setup my email accounts through the mobile service provider's web portal. Every time I try to setup emails from my device using "Emails Setup" option, I get the message "Your device encountered a problem with this application's server". Looking forward to your kind response Thanks Nini

Hi and Welcome to the Community!
Here is a KB that discusses that error:
Article ID: KB32866 Error "Your device had a problem connecting to the server" is displayed when attempting to integrate an email account in the Email Setup application
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to create dynamic calc account in multi-plan type application

Hi expert,
I have a planning application with 3 plan types.
I created a calculation script which fixed on accounts in plan type 1 only and the calculation suppose to calculate a "dynamiccalc" account with a member formula attached. Everytime I run the script, it takes very long time and I found there are sessions at the back of essbase with "Process local xref/xwrite request" request to other plan types.
It does not has this kind of session if I change the account to "store".
Would like to check, is it possible to create a dynamic calc account to calculate for only 1 plan type in a multi-plan type application? Is there any special setting that I need to do to enable this? I already selected source plan type as Plan type 1 for my dynamic calc account. Please help!
Many thanks!!
My HP application is on version 11.1.2.1.

Hi Jake,
Thanks for pointing out the check box. Overlooked it and the checkbox was not unchecked, even I only wanted the account to exist in 1 of the plan type.
However, after I unchecked and refresh now, when I run the calc script, it still trigger process at the back to the other 2 plan types with "Process local xref/xwrite request" request. What else could I have missed?
I already added the "HSP_Nolink" UDA to all accounts in plan type 2 and plan type 3 and confirmed that there's no account with "Xref" member formula, I really don't know why it is trying to process local xref request. Can anyone help??
Many thanks!!!

Issue with member move, change or delete from Planning web application

Hi
We need to make some basic editing (move, change or delete) of level 0 members of the cost center dimension from Planning web application instead of from essbase database outline. But everytime, we tried from the web Admininstration/Dimension drill down and did a Cut or Delete of a base member, the screen either becomes blank or hangs. And we would have to stop and restart the Planning web application server to bring it back.
Is this a bug or is there something we missed? We are using Planning 4.0.1 and essbase 7.1.1. Any advice on workaround is greatly appreciated. Thanks.

Hi,
Have you tried running the planning server in the foreground from the start menu and check the output to see if there are any issues.
Also it might be worth trying to increase the java heap size, maybe you have a complex hierarchy and this is causing the heap size to max out.
Have you tried using another method to make changes to the hierarchy such as HAL ?
Cheers
John

Email setup Application is gone

I updated my BB Curve and now my email setup application is gone. i have selected "show all." so, right now i can't update or verify any of my email accounts. anyone have a solution? thanks
Solved!
Go to Solution.

1. Options > Advanced > Host Routing Table > Menu > Register.
2. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
if still nothing...
3. resend your service books from your carrier BIS site.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Steps to create Planning Sample Application in EPM11.1.2

Hi,
Can anybody provide me any helpful sources for the steps to create Planning sample application in EPM11.1.2.
I tried in OBE and couldn't get step by step process for EPM11.1.2.
If Possible please provide a link where I can follow step by step process.
Thank you
Venky

John,
Thank you for the reply. I created the data sourceusing workspace.
I have few questions while creating the application.
1. Do I need to create a blank application or follow the steps
2. Folow the steps means with out selecting blank application click next and define all new dimensions that are there in .ads file
scenario
year
period
Entity
Account
Version
Segments
Currency
with these create the application. Then I validated and got 4 errors. I am not able to deploy it.
While creating the application it never asked me datasource details.
Where I shoud provide the datasource details?
Thank you
vijay

How To Create Setup Application in java?

I want to create a setup application which will guide the client while installing my software on his location.
This setup application will installed all the files requires for my application

Great!!!
So whats the problem?

Reloading BlackBerry Email Setup Application

Hi,
I accidentally deleted the Blackberry Email Setup application in my BB Torch 9800. Accordingly, I cannot setup any email accounts on my BB.
Does anybody know how I can reinstall this application so that I can setup my email accounts on my BB?
Thank you,
adji99
Solved!
Go to Solution.

I don't want to step on Boomer56's toes, but you've been without a response for six hours so I'll take a shot at it.
If you plug your phone into your PC and open Desktop Manager, you can reload your current OS from there. First, open Desktop Manager and do a data backup of your phone. Once that's complete, click Device at the top of DM and Update from the drop-down menu. You might be told that your phone is up to date. At the bottom of that box, it'll show Show Other Versions. Click that and make sure your current version is the one that's checked. Keep it checked and click Update. This will re-install your current OS, along with all the bells and whistles it came with.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Heading "Flor Plan Manager Application for xyz"

Hi experts,
When I create a new document in SRM I get a pop up. The heading of that browser window very shortly has a title that reflects what I'm actually doing. E.g. "shop" for a Shopping Cart. Then the heading changes to "Floor Plan Manager Application for xyz". This heading doesn't mean anything to users and is confusing.
How can I change this heading to something meaningful, or at least display "Shop" instead of "Floor Plan Manager Application for GAF" in case of the Shopping Cart Wizard.
Best regards,
Marcus

Hi Marcus,
I think it is related to particular webdynpro component. You need to identify the view of WDC, and then what action linked by the UI element. Study the action to locate the method being called.
For example SRM 7 SP5, shop in 4 steps (wizard), when you click "Change Personal Default Settings", the popup title is "Floor Plan Manager Application for GAF". So you find out the WDC is "/SAPSRM/WDC_DODC_SC_GAF_C", view is "V_DODC_SC_GAF_FSCA", action is "DEFAULT_SETTINGS". The method being called is
"/SAPSRM/IF_CLL_DOM_SCW_CA~DEFAULT_SETTINGS", in which the coding open popup windows does not include title.
You may compare similar method called in one-step (professional) screen, the method is "/SAPSRM/IF_CLL_DODM_SC_H_BD~DEFAULT_SETTINGS" and the title is defined in class's text symbols.
This was fixed by Note 1393966.
Similar logic may be applied to your case.
Regards,
Donald

401K Plan Setup

1. Anyone have a separate 401k regular and catch up plan setup? Our requirements requirement that once the employee reaches the pre tax limit 16.500, than the catch up contribution plan should start. Since, we can have separate contribution percenatge for regular and catch up plan, this is why this needs to be setup as two separate savings plans.
2. Also, another requirement is not to accumalate in /102 401k elgible wages, if the employee has no contribution or stops the contributioin for ro 401k plan. I know, that if we check the wage type to accumalte for /102, it does not matter if employee contributes or not, the the /102 accumalates. As anyone done this through standard config, user exit, or any other suggestions?

create two similar 401K plans, for catchup plan set Regular 16500 limit to Zero hence new plan will only use Catcup contribution as soon as it is created via infotype with new contribution %.
i understand this doesnt help your complete post, may be this helps.
aman
Edited by: Aman Kumar on Apr 19, 2010 10:54 AM

Migrating Planning Classic Applications to EPMA

Why I need to Migrating Planning Classic Applications to Performance Management Architect; I mean what is the benefits I gained.
Thanks In Advance,
Bishoy Sami

Hi
Have u read this thread
EPMA Vs Classic application
regards
sasha
Edited by: Softperson on 26/5/2010 14:14

Planning Setup Application

Similar Messages

Maybe you are looking for