Planning Task List Due Date

Dear All,
When we create planning task list we can aslo assign due date for each task with in task list.
This due date has three components
1. Date
2. Time
3. Alert
However time is denoted in EDT (Estern Daylight Time).
As we are implementing the project in India we need to have Indian Standard Time (ISD) instead of EDT. Is this possible.
Further if useres are spread across the globe is it possible to set different alert times for different users. For this i think we need to replicate the task list with due date set users specific.
Can anyone provide with screen shot of delayed activities, completed activities based on due date previously assigned.
Thanks and regards
Payous999

Hi Payous999,
Let me explain in steps
1. EDT , You are viewing EDT because the system on which Planning has been installed has its time zone set as EDT.
2. Once ,we change the time zone of the server/ system from EDT to IST ( in you case ) , then try to create a task list , it will show you IST.
3. Screen shots and more of task list information can be found in the guide itself.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Similar Messages

Sharepoint 2013 designer workflow auto approve task after due date is passed

sharepoint 2013 designer workflow auto approve task after due date is passed.
Could we approve the task automatically once due date is apssed?
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
If your task is created by a workflow (first) and stored in a separate task list, you can create another workflow on this particular task list, then each workflow instance would check if current task is expired (not approved/rejected), then
determine if update current task's "Task Outcome" as approved (and update task status as complete), and then create a retention policy on this paricular task list to trigger the workflow on due date .
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Google Calendar tasks (with due dates) not showing on cal

Google tasks with due dates show up in google calendar. I have google calendar synced to my ical and iphone cal no problem. But those tasks with due dates do not show up on the ical / iphone cal....
Does anyone have this working successfully?

You can download BB Bridge on your handheld, then bridge between HH and PB.
After installation, please do a hard reset for your HH.
refer to this KB, it can help you to set it up.
KB27823
I will try my best to help you with the issue you get.

Tasks with due dates not showing in Calendar

Hi there,
This is my first time here. Anyway, any suggestions how I can make my tasks with due dates to show in my Playbook calendar, the same way they are in my 9810's calendar? I intend to use my Playbook at work as well.
Tan Wei

You can download BB Bridge on your handheld, then bridge between HH and PB.
After installation, please do a hard reset for your HH.
refer to this KB, it can help you to set it up.
KB27823
I will try my best to help you with the issue you get.

Email reminders to complete task by due date in Task list

How to have reminders on a task list to remind task owners to complete their pending tasks? Any out of the box solution would be appreciated even with work around
Environment: SharePoint 2013, Nintex Workflow, NO SharePoint Designer
Kesava

Hi Kesava, how do you want to remind them? When? You could use a formula in a calculated column to set the date of the reminder based off a date column in your list. However, sending the actual reminder will require an advanced workflow, not something
you can do out of the box.
cameron rautmann

TS4000 How do I organize tasks by due date in iCloud

I recently began syncing my Outlook task list to my iPhone via iCloud. All the tasks are there, but there is no order to them. It's just a random list of tasks. I need to organize them by due date but I have not figured out how to do that. Does anyone have a solution?

dswalston wrote:
How do I organize the photos on a PC? I can download them, but in iTunes I don't have a way to work with the photos - and I can't figure out how I can organize using my PC Windows Explorer.
As you have been told, you do not organize photos with iTunes, and the photos are really not handled by iTunes, it is just a helper. You would organize the photos on the computer like you would any files. Just remember, when you select folders in iTunes to sync, iTunes will only sync down one level, in other words, don't create folders within folders. After creating folders with names you want, put the photos in the folders and then sync to the phone. In the Photos tab, just select the individual folders you want. You do not have to sync all folders and all of the thousands that you have on the computer, only the selected ones you want. Just remember that saving photos in the camera roll, or now the recently added, is just inviting problems. That area is very much like volatile memory on the computer. If something happens to the phone and you have to reset, if you do not have those photos imported to the computer or are just relying on the iPhone backup, you could find yourself without photos at all. Import them and then sync back. That way the backup of the photos is the computer folder.

Inspection Plan Task List Intervals

Does anyone know if it is possible to create two task lists within an inspection plan, with the same usage, and have only one be active at a time depending in the date? The scenario is this...we have different specifications on a given product depending on the time of year (summer, winter, etc) and as opposed to manually setting one to "Q" (approved) and one to "HLD" I thought maybe there was some 6.0 functionality that would allow SAP to change this for me?
Thank you in advance!
vee

Nothing along those lines. But here's another option for you.
Create two insepction types. For instance.. 04S and 04W. Assign each inspection type a different plan usage. In the summer, all the materials would have 04S activated as the preferred inspection type. In the winter, on the approriate date, use QA08 to change over all your materials to 04W which, since it has different plan usage, would use the "winter" inspection plan.
In the summer, on the correct date, use QA08 again to switch the materials back to the summer plan by activating and setting as preferred, the 04S inspection type.
FF

ICal to do list due date shows only day and year

Trying to set up a few to do items for the future, I checked the "due date" box and it's showing today's date as 22/2013 as oppose to "01/22/2013". While I can change the "22" to a future day, I don't have the option to modify the month because it's not shown. Any clues?
Thanks.

Nevermind. There's a setting in the preferences for how soon after an event is completed that it is removed from the visible list.

Material specification and Inspection plan - Task list usage

Dear Friends,
In inspection type Task list usage is assigned
For Example
inspection type 01 - usage - 03
inspection type 05 - usage - 05
inspection type 06 - usage - 07
inspection type 10 - usage - 06
In my scenario i want to use all the above inspection type for a product
if i use mateial specification there is no any problem with my Task list usage
If suppose i use inspection plan do i need to create different inspection plan with different usage
or is it possible to create one inspection plan with all the above usage
what about universal usage 03 can i use it
i try to use but system does not triggering inspection lot
can any one Suggest some ideas
Many Thanks & Regards
Raj

Hi Raju,
All of first pls understand the concept of Task list and specification.
If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
And if you don't wish to have these functions then simply go with the material specification.
Now it comes the actual query about task list usage.
If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
Regards,
Shyamal

Workflow giving "Suspended" Error on Calculated Columns- Sending Reminder Emails on List Due Date

I have created a list that has our reporting due dates plus calculated columns for 5 and 10 day reminders.
Example:
Due Date: 3/7/2014 1:00 PM
5 Day Reminder (Calculated Column= [Due Date] – 5): 3/2/2014 1:00 PM
10 Day Reminder (Calculated Column= [Due Date] -10): 2/25/2014 1:00 PM
As you can see in the list, it calculates the (5 and 10 day) reminder dates correctly in the list…
However, what I am wanting to happen is to build a workflow that will automatically trigger and send these reminder emails.
In SP 2013 Designer, I have my conditions set as:
I can go in on the list and set the workflow but once the due date/time comes up… The status changes from "Started" to "Suspended"-- I never receive a reminder email and I get the following error:
"RequestorId: ff5dac1d-ccee-ba1b-0000-000000000000. Details: RequestorId: ff5dac1d-ccee-ba1b-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP
500 {"error":{"code":"-1, System.FormatException","message":{"lang":"en-US","value":"String was not recognized as a valid DateTime."}}} {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["33"],"SPRequestGuid":["ff5dac1d-ccee-ba1b-8934-5a9d0c69d3c4"],"request-id":["ff5dac1d-ccee-ba1b-8934-5a9d0c69d3c4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Tue, 25 Feb 2014 18:49:09 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)"
The string I have set up within SP Designer for the dates is:
If Current Item:Due Date
equals Today
If Current Item:5 Day Reminder
equals
Today
If Current Item:10 Day Reminder
equals
Today
Any ideas as to what I am missing?
Thank you in advance!
Amanda

Hi,
To start the workflow, we have three options:
If you select the “start the workflow automatically when an item is created” or “start the workflow automatically when an item is changed”, the workflow can be started automatically.
If you don’t, your workflow will never run, and therefore never wait till the date specified.
The “Pause Until Date” action causes a workflow to pause executing until a specified date and time.
If current day is equal to the specified date, it will execute the next step.
More information:
Workflow actions quick reference (SharePoint 2013 Workflow platform)
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

OIL6 - MAINTENANCE TASK LIST PROFILE DATA

Dear Experts,
1. How this OIL6 - maintenance task list profile works in PM task list?
2. In IA02, I have select Settings - profile ( Task List) and see the Network Graphic and did the changes and then saved.
But after again I have checked in IA02, there is no profile settings saved and no Network Graphics available. System says "Maintain Profile".
Please focus on the issue.
Thanks & regards,
Tushar

You can default the Profile in the initial screens for task list processing by entering the "PIN" parameter ID in your user master.
PeteA

URL Task List in System 9 Planning

We have recently upgrade planning from 4.0 to System 9.3; however, there was a feature in Planning task list where you can build a URL to retrieve report from Hyperion Report with parameter passiing from Planning to Report for a POV driven report. Does anyone know how I would convert the below link in system 9.
http://xxxx:8200/hr/common/HRLogon.jsp?elementName_UTF8=%5cTMWSP+Planning%Workbook&sameWindow=false&elementType=2&attribute=Locations.id.Region%20GOODSITE&gridHeadings=0&viewAs=pdf

Hi,
You can go to workspace and browse to the report through the explore page. Right click on the report and select properties. You should see the link called as smartcut over there. You can copy this link and use it in your task lists.
Cheers,
Alp

Strange one day adding to tasks due date (Outlook –SharePoint- MS Project integration)

Hi,
I have integrated MS Project 2010 with MS Outlook 2010 via SharePoint. Everything has gone more or less smoothly (as it could be for Microsoft
J), but finally I got into a strange problem. Strangely enough,
MS Outlook, while syncing tasks with SharePoint (these tasks are pre-created in MS Project and synced with SharePoint beforehand),
adds one day to due dates of each of these tasks, e.g. for “Task 1” due date in MS Project and on SharePoint is 20.10.2010, but MS Outlook puts it as 21.10.2010, for “Task 2” due date in MS Project and on SharePoint is 22.10.2010, but MS Outlook
puts it as 23.10.2010, etc.
What is a strange trick? I have checked work time, holidays - everything is the same in MS Outlook, SharePoint and MS Project (8-17, Mon-Fri, 8 hours, 40 days a week). What could it be?
Thanks a lot.

Hi,
It seems nobody can reply, so I will reply by myself because I found out the answer. The answer from Microsoft is pretty simple - ha-ha we know about,
we will work on it, wait, ha-ha. Firstly let me quote Microsoft senior tech answer on the same request 3 month ago:
"Hello Artur,
The senior tech got back to me with the following conclusion:
Outlook is rounding everything set to 12:00 PM or after to the next date because the columns mapped to start date and due dates are only Date columns,
not date/time columns.
It is rounding at noon because of the .5 decimal. This can be seen in Excel - 41115.5 = 7/25/2012 12:00 in date/time format whereas 41115.49 = 7/25/2012
11:45.
The issue seems to be an expected behavior, the next level of support is working on the same but currently I have not been provided with any ETA, so
it looks like the issue will take a good amount of time to get fixed.
I would appreciate your patience while we are working on the issue. I will keep you posted as and when I get an update on the issue."
Sounds good, does not it? Ok. After asking this question recently I got run-around and finally I found the same question unsolved (see the quotation
before) more than 3 month ago. I have sent it to Microsoft Tech Support. Look at reply I got from them on 22.10.2012:
"This issue has been noticed and will be handled by the product team. Once we have any updates, it will be responded to you timely".
So the basic function does not work properly, there month passed - no way! Wait until what? I could hardly
even imagine how Microsoft launched the product with such a bug and is not resolving the problem for months.

Automatic task list delete selection when UD is reject

Dear Experts,
I created calibration plan for Quality Istruments, for that assign equipment task list . At due date calibration order & inspection lot created. I sent the insturment to vender & some time it will be rejected fr vender side .We want to set delete selection automatically in task list header data when I made usage dicision as a rejected after come in factory.
Regards,
Avinash.

hi
Iam not sure ,just check with abaper whether it is possible with creating new function module.Try to create a Function module and assign the same in IMG for inspection lot completion for follow up action for usage decision and assign the same in the selected set
regards
thyagarajan

Taking exactly 10 min to open the task list using smartview

Hi All,
We are using hyperion smartview 11.1.2.2
when I connect to hyperion planning task list using smartview it is taking exactly 10 min to open the task but the same is taking only 3 seconds in our Production environment. Can someone help me out.
I have also followed the below but it did not help me out.
It might be that APS is timing out, I assume you are running OHS
if so stop OHS, go to <MIDDLEWARE_HOME>\user_projects\<instance_name>\httpConfig\ohs\config\OHS\ohs_component
edit mod_wl_ohs.conf
In there you will see something like
< LocationMatch ^/aps>
SetHandler weblogic-handler
WeblogicCluster <APS_SERVER>:13080
< /LocationMatch>
add
WLIOTimeoutSecs 3600
so it looks like
< LocationMatch ^/aps>
SetHandler weblogic-handler
WeblogicCluster <APS_SERVER>:13080
WLIOTimeoutSecs 3600
< /LocationMatch>
Save, start OHS and try again.
Below is our planning0.log
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE =   CONTEXTID = 0000K2RgbvYCsl95nfp2iZ1I4pUX00000x TIMESTAMP = 1377001701090
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
####<Aug 20, 2013 8:28:21 AM EDT> <Warning> <HTTP> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000K2RgbvYCsl95nfp2iZ1I4pUX00000x> <1377001701106> <BEA-101138> <ServletContext@30584151[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:2.5 version:11.1.2.0] One of the getParameter family of methods called after reading from the ServletInputStream. Not merging post parameters.>
####<Aug 20, 2013 8:28:21 AM EDT> <Info> <WorkManager> <AMIWSP01> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000K2RgbvYCsl95nfp2iZ1I4pUX00000x> <1377001701106> <BEA-002936> <maximum thread constraint WatchManagerEvents is reached>
####<Aug 20, 2013 8:28:22 AM EDT> <Alert> <Diagnostics> <Planning0> <oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump Executor (created: Tue Aug 20 08:28:21 EDT 2013)> <<WLS Kernel>> <> <> <1377001702028> <BEA-320016> <Creating diagnostic image in C:\Oracle\Middleware\user_projects\domains\AMIHYPRD\servers\Planning0\adr\diag\ofm\amihyprd\planning0\incident\incdir_69426 with a lockout minute period of 1.>
####<Aug 20, 2013 8:39:11 AM EDT> <Error> <WebLogicServer> <Planning0> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1377002351544> <BEA-000337> <[STUCK] ExecuteThread: '28' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "635" seconds working on the request "Workmanager: default, Version: 0, Scheduled=true, Started=true, Started time: 635907 ms
POST /HyperionPlanning/SmartView HTTP/1.1
Accept: */*
Accept-Language: en-US
Accept-Encoding: gzip
ORA_EPM_SVCLIENT_CLIENTIP: 10.101.6.194
ORA_EPM_SVCLIENT_EXTENSIONS: b78f60ca-e18b-401d-a10f-626c0118daf2;AF52322C-D60B-41f1-A8C8-0C299FBB0AA4
Content-Encoding: gzip
User-Agent: HttpApp/1.0
Content-Length: 212
Cache-Control: no-cache
Cookie: JSESSIONID=DtdJSTgFpg67nJ2wvxKncMtlvKFJvZn9Q5Ljj0y4t5nZGkDRbsvN!165491247; ORA_EPMWS_User=admin; ORA_EPMWS_AccessibilityMode=false; ORA_EPMWS_ThemeSelection=BpmTadpole
Connection: Keep-Alive
X-Forwarded-For: 10.101.6.194
Proxy-Client-IP: 10.101.6.194
X-WebLogic-KeepAliveSecs: 30
X-WebLogic-Force-JVMID: 165491247
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-203 "[STUCK] ExecuteThread: '28' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
    com.hyperion.planning.olap.HspEssbaseMainAPI.EssGetCalcList(HspEssbaseMainAPI.java:???)
    com.hyperion.planning.olap.HspEssConnection.essGetCalcList(HspEssConnection.java:306)

In order to diagnose your problem you will need to download and install the below
Try clicking the tap problematic apps while the trace is running
Install the WPT (windows Performance Toolkit)
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage, CPU usage, Disk IO.
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry) Please configure yours as per the below snip
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

Planning Task List Due Date

Similar Messages

Maybe you are looking for