URL Task List in System 9 Planning

We have recently upgrade planning from 4.0 to System 9.3; however, there was a feature in Planning task list where you can build a URL to retrieve report from Hyperion Report with parameter passiing from Planning to Report for a POV driven report. Does anyone know how I would convert the below link in system 9.
http://xxxx:8200/hr/common/HRLogon.jsp?elementName_UTF8=%5cTMWSP+Planning%Workbook&sameWindow=false&elementType=2&attribute=Locations.id.Region%20GOODSITE&gridHeadings=0&viewAs=pdf

Hi,
You can go to workspace and browse to the report through the explore page. Right click on the report and select properties. You should see the link called as smartcut over there. You can copy this link and use it in your task lists.
Cheers,
Alp

Similar Messages

  • Extend task list for new planning plant

    Hi Gurus,
    I have 40 task lists for a planning plant 1000. I want to extend them for a new planning plant 2000. Is there any method to do it without usnig BDC or LSMW?
    Regards,
    VM

    Hello VM,
    No it is not possible to simply extend the Task list.
    You can copy the same for different planning plant. But if it is not so much necessary, Make other as Maintenance Plant rather than Planning plant.
    Regards
    Naveen

  • Plant Maintenance - Linkage between Task List and Maintenance Plan

    Sir,
    In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
    I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
    Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
    If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
    How to create Maintenance Plan for the above scenario?.
    Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
    I need some help in this regard. A detailed reply will be helpful.
    Can anyone throw some light in this regard.
    Regards,
    R. Vijayakumar

    you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
    you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

  • Task list usage inspection plan - Universal 3 and GR 5

    Dear Friends,
    while creating Inspection plan for GR inspection from Procurment it is advisable to use Task list usage 5 or usage 3 which is universal
    may i know what is the difference
    Please advise also
    There is task list type  Goods receipt model  -    501  which  is Material, vendor and manufacturer what that mean and where it  is used
    Thanks & Regards
    Raj

    Hi Rajkumar,
    While planning an Inspection,which Task List gets assigned to which Inspection Lot is linked through combination of TaskList Usage and Lot Inspection Type
    In spro (at the location as suggested above) we assign TaskList usage to the Inspection Type. When any Lot is created based on the setting in QM view of MM, it looks for this link for automatic assignment to the lot.
    For your question "while creating Inspection plan for GR inspection from Procurment it is advisable to use Task list usage 5 or usage 3 which is universal"; both options will work as long as the above config in spro is maintained.
    It is however advisable to use the standard option of TaskList Usage of  05 as it is easier to segregate and analyse TaskList / Inspection Plans based on their usage; in case any need arises.
    Hope this helps,
    Thanks,
    RKM.

  • Task list in hyperion planning dataforms 11.1.2 version

    Hi,
    I created a task list using administrator account and assigned these task list to user1. I mention a due date and alerts also. Here user1 have appropriate roles to access the dataform and to finish the task also.
    Now the issue is, when user1 finished and put the status as completed. But in admin user, those tasks status is showing as Incomplete.
    How admin will get that updated status as completed in task list.
    Regards,
    Madhu

    Hi David Mendele,
    Thanks for the reply.
    ya as u said i looked into report. but there also am getting status as incomplete using admin user.
    First of all i will explain u clearly about this issue.
    using admin account i created two task lists and assigned these tasks to user1. for example salary account and salary details ok.
    Now i login as user1 and put those task lists status as completed ok.
    Then now i login as admin and checked out those Task lists. In this scenario, am not getting those task lists(*salary account* and salary details) status as completed.
    It is still showing that status as Incomplete only which is already finished by user1 ok.
    Now, how can i get those assigned task lists status as completed automatically using admin user.
    I hope u understand about the issue.
    Regards,
    Madhu
    Edited by: 895234 on Nov 30, 2011 8:01 AM

  • Issue linking external URL's in task list

    When I link a URL to a task list, a pop-up at the bottom of the screen saying "Only secure content is displayed" with a button saying "Show all content"
    When I select "Show all content" an Internet Explorer pop-up appears asking to either "Leave this page" or "Stay on this page."
    Selecting "Stay on this page" does nothing, but selecting "Leave this page" logs me out of Planning. When I log back in, the web page appears when I click on the task list.
    When I log off and close my browser, I have to go through the same steps.
    Is there any way to have the URL task list work without having to go through those steps? Is this an IE security setting?
    Thank you in advance for any input.
    Tiffany

    What URL are you using, is that an FR or WA report? If so check this Oracle - Hyperion Labs......: Generate Smartcuts for all objects under a folder
    Regards
    Celvin

  • Strategy in task list and Strategy based Maintenance Plan

    Dear Gurus,
    I have some doubt about
    is it same if we create a single cycle plan with a task list in which maintenance strategy let say A is being used and a maintenance plan strategy based let say A and task list without any strategy
    can some one explain use of strategy in task list and maintenance plan
    Regards
    Armaan

    Hi,
         In Strategy Based Plans :- When ur entering strategy in initial screen of IP42 then inside the plan system will allow u to select tasklists created with that strategy only ...
    In Single Cycle Plans :-  Here even though if u select tasklist of a particular strategy , system copies all the operations of the tasklist to the order...
    From your above example :- Single Cycle Plan if cycle is monthly is equal to strategy based plan having only 1Month package .
    further package in strategy allows u to select which operations of tasklist u want for 1Month..
    regrds
    pushpa

  • Inspection Lot without task list

    Dear experts,
    I've this problem:
    I've create an inspection lot without task list.
    If I try to assing a task list the system give me the message "No inspection plan could be found".
    But in transaction QP02 I've seen that the inspection plan exists and the material is assinged to the insepction plan correctly.
    Where's the error?

    Most of the issues for a plan not being assigned have been raised here already.  I suggest you rereview the value in QA02 to see what usage the lot is looking for.  Than change the key date to one day after the date the inspection plan was created and assigned to the material.
    Once you have double checked all the above, go to QA02 and click on the button to assign the specifications/plan and see if the lot is updated.
    If not, please tell us:
    1) what is the inspection type and origin for this lot.
    2) what are that statuses of the lot at this time.
    That might help us.
    FF

  • Plant independent general maintenance task list

    Hi, All,
    Can it be possible to create a general maintenance task list without maintenance planning plant & which can be used for all plants in same client?
    This is required to reduce the common task list data per plant existing in the system.
    Regards,
    Sanjay

    Hi Sanjay,
    maintenance Planning plant & Work Centres may differ according to the Centralised & decentralised maintenance.
    Hence not only maintenance planning plant but alos work centres may also needs to changed.
    Logically each work centres planned activity cost may differ so if u create a common task list it will not serve the purpose too.
    Ref link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/ae33e04b8611d182ba0000e829fbfe/frameset.htm
    Ramesh

  • How to exclude certain operations in PM order from task list?

    Hi Experts,
    we have number of operations in task list and being attached to in maintenace plan. While scheduling Miantenance Plan system is creating order as per requirement with set of all operations present in the task list. we would like to restrict certain operations needs to be appeared in the maintenance order? any enhancement will work for this kind of user requirements?
    suppose if task list is having 100 opeartions. when we do scheduling by using this task list through maintenance plan system is defaulting 100 opreations in the order as per standard. we would like to restict certain operations not to appear in the order, even it is present in the task list!
    Thanks in advance
    Regards,
    Krishna

    Hi ,
    If you could convert this order type as Service order you will get a field called Service Product. Then you can use Classification and Characteritics for the service product and the Tasklist to choose the required operation in the service order created by the system. You need to use the techniques of varinat config to achieve this functionality.
    AlexPr

  • In inspection lot..task list does not fetch

    Hi QM Guru..
    when i do UD for fish material. with QA32....in QA32 showing inspection lot no..but when i select line item of inspection lot and click on inspection lot..one window open..when i go inspection specification for task list..when i  click on task list....show the massage....
    but i all ready created inspection plan from QP01...i have over ther MIC and sampling procedure also
    No inspection plan could be found
    Message no. QA278
    Diagnosis
    A task list  could not be found for the selection criteria. The inspection setup for this material in the quality management view of the material master defines an inspection with a task list.
    System Response
    Sample calculation and inspection lot release are not possible.
    Procedure
    Check the:
    Selection criteria
    Material/task list assignment
    Task list status
    Task list usage
    Task list usages i have taken 5  for GR
    status 4 general release
    kindly suggest me why task is not taking...i have already created task list
    kindly suggest me
    Regards
    Aqueel

    Dear,
    Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
    Why are you creating rate routing? check lot for 04 insp type in QA02.
    Or for old material just create one new order and test it once again.
    You can check the statuses in config.
    QM>Quality Planning>Inspection Planning>General>Define Task List Status.
    You should find that "4" is in there with all the check marks on.
    QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
    There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
    Regards,
    R.Brahmankar

  • Sample functional specifications - Equipment task list?

    The earlier post of Teja provoked me to look into the other sample specifications provided in the ****************. The one I looked into is the equipment task list. I have a doubt here. I assume that the equipment is also a material. So why are equipments handled in a different way than to the other materials (using MM01/2 transactions)?
    Raghu

    Hi,
    Please check the following information from SAP help portal:
    Number Assignment for Equipment Task Lists and Functional Location Task Lists
    Numbers for equipment and functional location task lists are assigned internally. When you have created an equipment or functional location task list, the system issues a message with the number it has assigned to the task list. The first task list you create for a specified piece of equipment or functional location will be identified by a group number and a counter number. Further task lists for the same piece of equipment or functional location will simply be identified by a counter number within the group.
    Best regards,
    Stephen
    Number Assignment for Maintenance Task Lists - Task Lists (CS-AG/PM-PRM-TL) - SAP Library

  • Problem in Preventive Maintenance - Task list attachment

    Dear PM Gurus
    In IP42 while attaching task list for a plan (by clicking binacular), a new selection screen opens (Display Task List), in that for Status field value '2' is set by default and it is disabled.  2- is for Released for Order.  I want to change it to 4- Released General.
    Pl. tell me how to change it ?
    Babu R
    Edited by: Babu Radhakrishnan on Dec 30, 2009 8:40 AM

    Thankyou Jitender
    In 2-Release for order
    reference operation set is released for usage in routings and plans was set. When I uncheck it is comming as 4.
    @ PeteA
    The issue is I can't able to select the task list, since the status is 4 - Released (General) and in the selection screen status is set as 2 and I cant able to change it.
    Babu R

  • Which URL to use to open a financial report from a Task list ?

    Hi,
    I've got a big issue in Hyperion Planning : I do not know which URL to use to open a financial report from a task list.
    If I use the Smartcut (given when you do a right-click on the report, then Properties), a tab is opening (normal behaviour), but another tab is opening under the tab, which is very ugly, and moreover which prevent from using the PDF/HTML display icons !
    Is someone know which URL to use to display correctly a financial report when opening it from a task list ?
    It's an emergency, please help !
    Thanks very much.
    Virgile.
    PS. : we use Internet Explorer 8 and we use 11.1.2.1 Hyperion Planning version
    Edited by: 808808 on Jan 5, 2012 3:41 AM

    Hi,
    OK, thanks, it almost works !!
    I've just a problem. 2 tabs are opening.
    One is opening correctly and displays my report. I can display it in PDF/HTML.
    But another tab is opening with this message : This window can now be closed since the application has been launched in a separate window. Note: Popup blockers may prevent this application from working properly.
    Do you know why this tab is opening ?
    Thanks very much for your help.
    Virgile.

  • Strategy Plan with task list

    Hi all,
    can any one help me?
    I create a strategy plan with one maintenance item and one task list, with one task list item, for example. After scheduling I get a maintenance order with two items. One item from the task list and one from the maintenance item and it´s necessary to confirm both order items.
    It´s possible to create a maintenance order with only items from the task list?
    Thank you for your support
    Detlev

    Detlev,
    The PM/CS Order operations should only come from the task list that is assigned to the maintenance item.
    If you are getting additional operations than are on the task list then its possible that you have:
    - a system bug
    - developed some new functionality
    PeteA

Maybe you are looking for