Planning to upgrade from Hyperion v9.3.1 to Hyperion V11.1.2.1

HI,
I have doubt on upgrade part.
Planning to upgrade from Hyperion v9.3.1 to Hyperion V11.1.2.1
Below products are using in v9.3.1
1.     Essbase
2.     EIS
3.     Web Analyzer
4.     Excel Add-in
Below breakup for Hyperion objects
Total number of cubes – 10,
Total number of analyzer reports – 100
Total number of users – 50
     Can we upgrade all essbase cubes from v9 to v11?
     What consideration need to take while EIS upgrade?
     Can we upgrade all 100 reports?
     Can we upgrade all 55 users?
     Any other points need to look while doing upgrade?
welcome your feedback.
Regards
Praveen

Here is the document that will help you.
http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf
I would think the answer to all your question is "Yes" but that said, I am not very sure about Essbase.:)

Similar Messages

Planning to Upgrade from PI 7.0 to PI 7.1

Hi All,
Need your help . Planning to upgrade from PI 7.0 to PI 7.1. What are the pre-requisites for PI 7.1.
earlier version PI 7.0 (SOA) and PI 7.1(Enterprise SOA), Architecutre point of view what's the major difference between PI 7.0 and PI7.1

Hi,
search in sdn ...
refer below guide.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90baf3dd-dbf9-2b10-47aa-ac5f56bb5030
regards,
raj

Slide libraries are no longer available in SharePoint 2013, what to plan when upgrading from 2010 to 2013?

What will happen to the existing 2010 libraries when we try to upgrade them to SharePoint 2013? What can we do to them now to prevent them from breaking since we are currently on SharePoint 2010?
-Kash

Hi,
If you're using a third-party tool, you can map the slide libraries to standard document libraries.
Even if is no the subject, you can still create Slide libraries in SharePoint 2013, please see : http://techtrainingnotes.blogspot.fr/2012/11/finding-missing-sharepoint-2013-slide.html.
My technical blog on SharePoint ||
My contributions on the TechNet Gallery

Planning on upgrading from Exchange 2010

Exchange 2010 sp3, 2008 R2 domain level
my AD and Exchange are all on VM. if i make a snapshot of all my Exchange 2010 servers, upgrade them to 2013, made a mistake, can we still go back to Exchange 2010 as if nothing has happened? i mean from the users point of view.
or will upgrading to Exchange 2013 do some changes in AD that going back or restoring the image snapshot of Exchange 2010 will not be possible anymore?

chances are you wil have big issues when you will try to use the SNAPshots recovery. see below.
http://thoughtsofanidlemind.com/2011/03/18/be-careful-with-vm-snapshots-of-exchange-2010-servers/
Exchnage 2013 does many changes to AD/Schema. Please see below.
http://technet.microsoft.com/en-us/library/bb738144%28v=exchg.150%29.aspx
http://technet.microsoft.com/en-us/library/bb125224%28v=exchg.150%29.aspx
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

I plan to upgrade from an iPad 2 - 16gh to an iPad2 - 64gh. How can I transfer all my data to the new iPad?

How can I transfer all my apps & data from an iPad 2 - 16g to an iPad 2 - 64g?

Transfer your purchases of the iPad to your computer's iTunes via File > Transfer Purchases, then backup up the iPad by right-clicking it under 'Devices' on the left-hand side of iTunes, and you can then restore that backup onto the new iPad (a list of what is included in a backup is in this article - it excludes music, videos, synced photos).
The restore won't copy passwords onto a different device, so you will need to re-enter your email, router, and any website passwords on the new iPad.

Hyperion upgrade from 11.1.1.3 to 11.1.2.2

Hi All,
We have started planning for upgrade from 11.1.1.3 to 11.1.2.2. Currently we are planning to upgrade UAT/ Test environment first so we have uninstalled everything from UAT server.so we will upgrade UAT to 11.1.2.2 and then migrate applications from PROD to UAT (HFM,FDM,Essbase and EPMA). Do we need to copy all the oracle schema's (HFM,ESS,HSS,EPMA,etc not the fact tables but hyperion components related) from PROD to UAT ?
We know that if we are doing in place upgrade or upgrade from PROD to PROD then it is okay to copy schema's but for cross environment like PROD to UAT , should we copy all the tables ? I am worried about the tables like configuration related, log related ?
Please advice.

There are a number of different available options when upgrading, if you just performing a clean install and then migrating applications you wouldn't need to copy the schemas.
If you are upgrading and leaving the original environment running then you need to clone schemas.
Cheers
John
http://john-goodwin.blogspot.com/

Upgrade from XI 3.0 to PI 7.1 Test plan

Hi All,
We are in the process of upgrading our XI server from XI 3.0 to PI 7.1. Our landscape is connection different Non-sap system(web, FTP, JDBC) and with different sap system.
we need to have concrete test plan before upgrading from XI 3.0 to PI 7.1 wherein non of our existing interfaces should not get affected.
Please provide your solution how can we have our test plan in development perspective. what are the area and functionality we need to test.
For eg.
1. do we need to test each and every communication channel?
2. do we need to go each and every mapping object and check whether any custom code involved?
3 I understand from the blog that when we go for upgrade we need Java proxies need to be redeployed and custom adapter module need to be redeployed. If so do I need go one by one communication channel and check is there any customer adapter module is there or not?
Along with this let me know is there any standard test plan strategy is available.
Thanks,
Dhill

Hi,
While upgrading to PI71. you should have consider few things as per below link
SAP NetWeaver Process Integration 7.1 Upgrade Considerations
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655
SAP NetWeaver PI 7.1 and SLD - Webinar Presentation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/300e3ca7-31cd-2a10-a6ba-87c7447d5fd7
Decision-Making Factors when Moving to SAP NetWeaver Process Integration 7.1 - Upgrade or New Installation with Phase Out
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
Thanks
swarup

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

Upgrading from XP to W7 - will I loose my LightR/M9 licence?

I plan to upgrade from XP to Win 7. In doing so I expect that I have to reinstall all software including Lightroom 2.6RC for my Leica M9. My questions;
- how do I transfer all historical data etc related to my images in Lightroom? I will of course take care of my DNG files - but will the Lightroom back-up take of everything else?
- can I reinstall Lightroom "within" my current license on the new platform without problems?
Thanks
/Anders

Your license is valid on any platform..windows, mac whatever version.
Ensure you have everything backed up to disks that do not contain the OS before you start the new instillation.
Make sure you copy your Lightroom catalog folder and all your image files in the same folder structure as they presently are in order to not have to relocate once upgraded. Install LR on your new system (use a downloaded copy, do not install from disk..you want the latest version, enter your license code and open the catalog..you should be good to go.

Upgrading from XP to Vista with no recovery drive.

Hello,
I plan to upgrade from XP to Vista. I have the whole 160 GB disk allocated to XP as a C drive. I have no problems in formatting it while changing to Vista.
The problem is that Lenovo gave no Vista DVD when I bought the laptop. Everything was given in the recovery partition which I formatted when I downgraded to XP. So how should I change back to Vista ?
Also I was browsing through the Lenovo Drivers website becoz I need Vista drivers once I install Vista onto the laptop. There are different versions of drivers available for my laptop's type-model, so how should I know that which one works best or which one was given in the factory installation from lenovo?

The simplest answer is to purchase the recovery cd if you were shipped with vista. The tech center can help with your purchase but they can order only what was originally shipped on the laptop. The cost is $45.00 plus s&h and local taxes.

Upgrade from 9.2.0.6 to 9.2.0.7

Hi,
We're planning to upgrade from 9.2.0.6 to 9.2.0.7 on one development machine which has 5 database and I just want to install the patch for one database.
Any advices and any issues with 9.2.0.7.
Regards,
Umair

Umair,
- Fist shutdown all database on this server (including all oracle services, such as, listener, agentctl and etc).
- apply 9207 patch on the server.
- open the database in migration mode, as per docs. and migrate it.
- the rest of the databases, just open normally, without opening in migration mode.
Jaffar

RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

Hi there
I need help as we are planning to upgrade from R/3 4.6C to my SAP ERP 2005, I need the help in the context that
. How much it will effect the prevoius functionalities, business processes user exits, reports, transactions and etc which thing one should have to keep in mind I need an general overview on this.
2. What is the SAP best practice for Upgrade.
3. Which things should be consider before upgrade.
Thanks and Kind Regards
Sohail

Hi Sohail,
For functional improvement between the releases you can find information in the release notes for example http://service.sap.com/releasenotes
Also you can find http://service.sap.com/upgrade for very useful entrypoint for any information regarding upgrade.
For more information, please check this links.
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://www.sap.com/solutions/business-suite/erp/index.epx
https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001266&_EVENT=DISPLAY
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

BW Upgrade from 3.x to 7.0

Folks,
We are planning to upgrade from BW 3.x to BI 7.0, Is it a direct update process or is it in 2 step process? And also I was reading some of the posts its says there are some issues to upgrade from 2004 to 2004s? Can some one point out those issues?
Thanks in Advance,
Kumar

Hi,
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
this is a good PDF on Upgrade from BW 3.5 to BW 7.0
latest on upgrade tp BI7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
/community [original link is broken]
Re: BW 7.0 Release
Re: BW 7.0 Release
Re: BW 7.0
Please reward points.

Issues with upgrading from Acrobat 7 to Acrobat 8

Hi,
I need to purchase Acrobat 8 for a new writer. Currently, we are not planning on upgrading from Acroabt 7 to Acrobat 8 for 15-20 writers. Are there issues that I should be aware of--problems opening files distilled in 7, and vice-versa.
Thanks,
Emelda Ben Shoshan

Not really, but it will depend on what kind of pdf files you produce and if you use any standards for pdf conversion.
The main thing to look out for would be for the write with version 8 to make sure he doesn't produce 1.7 pdf files, as these will throw up a warning in earlier versions of Acrobat.

How to upgrade from PI 7.1 SP8 to PI EhP1

Hello
We plan to upgrade from PI 7.1 SP8 to PI 7.1 EhP1,but we do not know how to apply it. ..
Please tell us the obtaining destination of the material of the installation guide etc.
any other info that you can share.

refer this link for details about new features for Enhancement Package 1 of the new release SAP NetWeaver Process Integration 7.1 will be presented. This will cover the new functions planned for the Enterprise Services Repository , Services Registry, and the Service Bus.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b054300d-6b36-2b10-6187-86065808e88e]

Planning to upgrade from Hyperion v9.3.1 to Hyperion V11.1.2.1

Similar Messages

Maybe you are looking for