RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

Hi there
I need help as we are planning to upgrade from R/3 4.6C to my SAP ERP 2005, I need the help in the context that
. How much it will effect the prevoius functionalities, business processes user exits, reports, transactions and etc which thing one should have to keep in mind I need an general overview on this.
2. What is the SAP best practice for Upgrade.
3. Which things should be consider before upgrade.
Thanks and Kind Regards
Sohail

Hi Sohail,
For functional improvement between the releases you can find information in the release notes for example http://service.sap.com/releasenotes
Also you can find http://service.sap.com/upgrade for very useful entrypoint for any information regarding upgrade.
For more information, please check this links.
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://www.sap.com/solutions/business-suite/erp/index.epx
https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001266&_EVENT=DISPLAY
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Similar Messages

Information required regarding BW upgrade (from 7.0 to 7.3)

Hi Experts,
We are in need of the following information regarding BW 7.3 upgrade for our project. It will be mighty helpful if you can help us with your inputs in the following areas.
1. Salient features of BW 7.3
2. Objects which gets affected during the upgrade and the ways to recover them back
3. List of steps to be followed before upgrade
4. List of steps to be followed after upgrade
5. List of issues faced while upgrade and the possible solutions.
Thanks in advance.
Regards,
Rajesh.

1. Salient features of BW 7.3
Ans. SAP Business Warehouse 7.3
2. Objects which gets affected during the upgrade and the ways to recover them back
Ans.      Datasource Problems may come, SAP Note 1489064
3. List of steps to be followed before upgrade
Ans.     Please Check following Link< Page No. 29 and 30 There are Jobs require to run by "Application Owner" = BW Consultant
     http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d00f4372-e2fa-2d10-1ea7-efdfacd07965
4. List of steps to be followed after upgrade
Ans.     Require to run most of same jobs which ran during "Prepare" Phase, Also Post upgrade testing
5. List of issues faced while upgrade and the possible solutions.
Ans.      Datasource Problems may come, SAP Note 1489064
Regards,
Sushant

Upgrade from SAP R/3 4.7 to mySAP ERP 2005 : technical changes

Hi All,
I wanted to know what objects(tables,structures,data elements ,ZPrograms,SAP Programs,Roles etc..) in d the entire SAP landscape will bear difference when compared with older version (SAP R/3 4.7).
I would like to know technically which objects will be modified after the system is upgraded.
Need urgent reply,
Answers will be rewarded

Dear Rohan,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Upgrade batch inputs from 4.6C to mySAP ERP 2005

Hi,
we are planning to upgrade from 4.6C to mySAP ERP 2005 (ECC 6.0). We are using batch input/call transaction in various (interface) programs (primarily in modules SD, MM, CS/SM, FI, CO). I would be grateful for any information that helps to estimate the effort to upgrade our batch input code. In which areas/modules/transactions did you encounter problems with batch inputs? How severe were these problems (one or two fields moved to another screen, or major redesign)? How did you address these problems (change BI or convert code to use BAPI)?
Thank you
Thomas

Hi thomas,
we were working on batch input's and our scenario is something like convertion of bdc's from 4.5b to ECC5. well, it was a long process of upgradation. and coming to the part of BDC's
Q) any information that helps to estimate the effort to upgrade our batch input code.
   we had 300 BDC's to convert from 4.5b to ECC5 and with a ten member team of ABAP experts it took us 30 working days to complete the process.
Q) In which areas/modules/transactions did you encounter problems with batch inputs?
   Mostly, we had problems from FI and something like in Revenue recognition process. The problems comes, when the whole transactions screens changes for the process. at this time we have to write completly a new BDC's. if we have right functional specifications and functional experts, it will be easy to convert BDC's.
Q) How severe were these problems (one or two fields moved to another screen, or major redesign)?
    As i have mentioned, out of 300 almost 25 to 50 were minor changes rest were huge changes. a completely new BDC's. the point here is, we were updating from 4.5b to ECC5. it might not be this scenario for 4.6c to ECC5
Q) How did you address these problems (change BI or convert code to use BAPI)?
   well, this is were we are curently working now. and curently there are 4 scenarios (and may be more in the future) were we have to replace three BDC's which are used for material master creation and make it into one bapi satisfying all the conditions of BDC's. actually, we have to find a BAPI( which i couldn't find) so, i have created a bapi. and tougher part is writing exceptions as we cannot write exceptions as we do in function module.
hope this is relavent to what you have asked.
cheers
ajay

LSMW after Upgrade on mySAP ERP 2005 is Fields lost

We use LSMW version 4.0.0. After Upgrade of 4.7 on mySAP ERP 2005 parts of Fieldmappings are no longer present. Project concerned has the following characteristics: Business Object method BUS1001006 method SAVE DATA. Use Extension E1BPPAREX/E1BPPAREXX The Fieldmapping to the Extension is missing. Unfortunately the 4.7-System is not present, so that I cannot make from the system a reconstruction.

Hello Eric.
Did you ever discovered what happened ?? I have the same problem for Bussiness Object method BUS1001006 method SAVE DATA, I am using version 4.0.0 , of the LSM Workbench from 08/31/2004.
Part of the fieldmapping was missing, only the header mapping remained.
But no upgrade has been performed, the only movement has been an upgrade from kernel 7.01 level 23 to 88.
I have assigned the mapping in QA tested and imported it to PRD, it now works, but a big question is, what happened to the mapping ??
Why is it missing in all the systems ??
I would sure like to find out, just to take precautions and make sure it does not happen again.
If anybody can help me out there, I would sure appreciatte it.
Best regards.
Juan Sanchez.

SES in mySAP ERP 2005 - UNKNOWN FUNCTION from TREX_RFC_GET_VERSION_INFO

After configuring the SES (TREXADMIN, RFC Destination and so on) I was able to run the indexing process successfully.
Selecting the TAB Version from the TCODE TREXADMIN I get the Exception: UNKNOWN FUNCTION from the Function Module call TREX_RFC_GET_VERSION_INFO in TREX_EXT_GET_VERSION_INFO.
The exception is not expected and a dump occurs.
Running a search via TREXADMIN (e.g. for LFA1) I'm getting the Exception OTHERS in FM TREX_EXT_SEARCH_DOCUMENTS at line 338 CALL FUNCTION 'TREX_RFC_SEARCH_DOCUMENTS_V3'.
Any idea?
Which TREX version is expected to work with mySAP ERP 2005? I installed all together from the same NW2004s DVDs.
Sergio

Hi Sergio,
Correct, ERP05 is based on NW04s (TREX 7.0).
You don't necessarily need TCODE TREXADMIN.
For running SES you can use TCODE SES_ADMIN.
To test SES you can use Program COM_SE_SEARCH_IIF_TEST
(You can start it using TCODE SE38).
In order to get the exception fixed, could you create a customer message in the Customer Support System (CSS) on the component BC-TRX-API, please.
Best regards,
Uwe

Help for Sap BW upgrade from 3.5 to 7.0

Hi All
Please can anyone help me in sap bi upgrade from 3.5 to 7.0.
Please send me helpful documents and if anybody have already worked into similar projects please send ur email id.
Willl appreciate the quick repsonse with points.
Regards and Thanks
Dheeraj Dua

Hi Dheeraj,
Check this- how to on BW 3.x Upgrade Checklist
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20bw%203.x%20upgrade%20checklist
Please check this link and you will find all Upgrade guides
https://websmp209.sap-ag.de/instguides
Also Check this,
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
this is a good PDF on Upgrade from BW 3.5 to BW 7.0
latest on upgrade tp BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
/community [original link is broken]
Hope This Helps.
Regards,
Ravikanth

Help! I recently upgraded from Leopard (10.5.8) to Snow Leopard (10.6.8) and now my iTunes won't open!

So I upgraded from Leopard to Snow Leopard. And at first, never received the option to like, carry stuff over from a back up. So I went to the Apple Store and they fixed that, and it looked like everything was fine and dandy and my content was there. I get home, and try to open iTunes and now am receiving this message: The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?
I click yes, but there are no updates/downloads of iTunes available, so nothing happens, it just says no updates at this time. I am very nervous about losing my library as I've collected a lot of songs and meticulously organized them over the past five years. How can I get iTunes to open? And without doing anything to lose my library? Please help, I'm super stressed and freaking out.

Download iTunes from Apple's web site and install it. Don't use Software Update.

Just a bit confused in regards to upgrading from Logic 5 - to Logic 7

Hey all...
So I was an avid Logic 5 user on an iBook G3... (or I had the "big box' of plat/gold - see how confused I am/was/is...?? HELP!!)
SOmething happened and I had to wipe my hard drive on the iBook, and the new system I put on was OSX 10.3.9, and then when I re-installed Logic(x?) it just plain wouldn't run.... crashed all the time and sometimes never launch the app. When I bought it, I got it at Guitar Center and this was when emagic owned it. I have an XSKey and all the registration for it. So right when I thought I was getting somewhere, emagic sells it to Apple... blessing, but bittersweet, because I can't get anyone at Apple to help me out, other than saying I have to get the new one - and they will not run on my current computer.
SO HERE IT IS; I have finally decided to ditch the iBook G3 and trump up to the basic G5 Tower, load it with at least 2GB's of RAM - and then I figured I could just buy the; Logic Pro 7 Upgrade from Logic Pro 6 or Logic Plat/Gold 5, 6 for $299.00 (and from what I have been reading on here also get the Logic Pro 7.2 Crossgrade for $49.00...)
IS THIS WHAT I NEED...? Like I said before I have all the stuff from the Logic (emagic) and know its one of the above mentioned needed for the upgrade!...? And will this then bump me to Logic 7 Pro - Not Logic Express.....?? And is this a good thing or......
I apologize for being so confused - but I'm so willing to get back into Logic that I'm actually buying new hardware, just to get back into producing!!
The guys at the Apple store are helpful - but all look cross-eyed when I begin asking Logic (or any Pro application) questions.......
Thanks in advance all!!
*jeffrey

The Big Box was Logic Silver (not Gold or Plat). That's a steeper upgrade.
If what you bought was the 'Production Kit' that included an a/62m interface, then you have Gold.
If what you truly have is Gold 5, you will get Logic PRO 7 for the $299. I don't know if that now includes 7.2 or if that's still an extra $49 (being that they're going to charge Shake users who paid 3k on it $49 while they drop the price to $500, I'd expect 7.2 to still cost ya).
MBP 1.83 & MDD 1G DP Mac OS X (10.4.6) Logic Pro 7.2.1, Motu 828MkII, LC&XT, Tranzport, Unitor8+(3x)AMT-8's

Please are you able to help. I have upgraded from Windows XP to 7 and am no longer able to email pho

I have upgraded from Windows XP to Windows 7 and am no longer able to email photographs from Elements 10. I need a verification code and have requested this several times. I have looked in the spam but nothing has arrived.Thanks you.

The software on the CD will not run on a Mac.
You may be able to navigate through the CD and pull out the image files, however.

Help required to get data from Cash Mgt

Hi
I need help to get following data from cash managemment .
Bank Name
Branch
Account#
Date
cheque#/Ref
Amount Direct Debited by bank
Amount Direct credeted by bank.
Kindly help
Regards

Hello.
See if this helps. When the Amount column shows a negative number it represents a Debit.
select b.bank_account_name "Bank Account" ,
bb.bank_branch_name "Branch",
b.bank_account_num "Bank Acc Num",
l.trx_date "Date",
l.trx_type "Type",
l.trx_text "Description",
l.amount "Amount"
from ce_statement_headers_all h,
ce_statement_lines l,
ap_bank_accounts_all b,
ap_bank_branches bb
where b.bank_account_id = h.bank_account_id
and l.statement_header_id = h.statement_header_id
and bb.bank_branch_id = b.bank_branch_id
and b.bank_account_id = <bank_account_id>
and h.statement_number = <'statement number'>
Octavio

SAP ECC 6.0 Installation Requirements(mySAP ERP 2005)

<b>Hi.,
How much space needed for SAP ECC6.0.Recently I am trying to install.,but where can
I get information about requirements,
thanks,
Raja
([email protected])</b>

Hi Rajesh
U can find the installation guide on www.service.sap.com/instguide
i think Sap Ecc6.0 needs more then 160GB space not sure about this.
Hope it will help u
Regards
Subhash

Help Required - Regarding New Implementation

Hello Experts,
Implementing a new SAP ... and got bit confused about the April 1 opening balances and March closure.
On 1st March 2014 we entered the following Opening Balances -
1. Open POs
2. Open Sales Orders
3. Stock Opening Balances
Then for the month of March we have been running SAP and the legacy system in parallel , making the following transactions –
1.       Sales Order (Invoiced in March only)
2.       Deliveries
3.       All AR Invoices
4.       All Purchase Orders
5.       All GRNs
6.       All AP Invoices
7.       No Bank receipts or payments were created. End of the month both AR and AP invoices will be Open for bank receipts and payments respectively.
The main question is which transactions need to be created/ closed to have opening balances in SAP.
(In other words ...
What is required now to create the correct opening balances? Can we close the invoices, both sales and purchases, without creating receipts and payments, respectively?
How do we need to enter the customer and supplier opening balances when we have already created all the invoices for the month of march?)
Your help will be much appreciated...
Thank you.
Best Regards

Hi, Venkat
I think that your Subject is not relevant to your problem
For Search Help problem please follow the test the following code.
PARAMETERS: ppernr LIKE pa0001-pernr.
DATA: i_return TYPE ddshretval OCCURS 0 WITH HEADER LINE,
      c TYPE c VALUE 'S'.
* Search Help for Pernr
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ppernr.
TYPES: BEGIN OF t_pernr,
    pernr LIKE pa0001-pernr,
    ename LIKE pa0001-ename,
END OF t_pernr.
DATA: it_pa0001 TYPE STANDARD TABLE OF t_pernr WITH HEADER LINE.
SELECT pernr ename from pa0001
    INTO CORRESPONDING FIELDS OF TABLE it_pa0001
    where pa0001~endda = '99991231' .
*    WHERE zsdo~kunnr IN sokunnr.
DELETE it_pa0001 WHERE pernr = '00000000'.
SORT it_pa0001 BY pernr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'PERNR'
      dynpprog    = sy-repid
      dynpnr      = sy-dynnr
      dynprofield = 'PERNR'
      value_org   = c
    TABLES
      value_tab   = it_pa0001
      return_tab = i_return.
Pleae Reply if any Issue,
and If above is also not solution too, than Please Explain your Problem
Kind Regards,
Fasial
Edited by: Faisal Altaf on Jan 17, 2009 2:46 PM

License key question with regards to upgrading from 7/8.1 to 10

Hi, I hope I've posted my question in the right area of the forum:
I understand that Windows 10 will be a free upgrade for Win7/Win8 users.
That's really wonderful but I was wondering what the exact mechanism with regards to our 7/8 license keys. Here's a couple examples to clarify my question:
first, example: I have Windows 7 Pro license and say I upgrade to 10 within the first year. Let's say I need to reinstall Windows after that first year is finished will I still be able to use that same license key I used to upgrade 7 to 10 to install a fresh
copy of Windows 10 or will I need to purchase a new license because the year is elapsed?
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7... because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road:
where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
Thanks for the feedback!

Hi Momashi
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7...
because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road: where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
If you Upgrade to Windows 10 and do not like it, for whatever reason.
Before you upgrade to Windows 10.
Create an image of windows 7 to an external HD and a recovery CD, using windows 7 Backup and Restore.
You can re-install windows 7 in the SAME SYSTEM using the recovery CD without using a key.
Hope it helps
Where did you get your outlandish information about a Windows 7 key turning into a Windows 10 key? Nothing in the past has ever happened like this before, so what makes you think it will happen with Windows 10?
My Windows ME did not turn into a Windows XP key!
My Windows XP key did not turn into a Windows Vista key!
My Windows Vista key did not turn into a Windows 7 key!
And so on!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Regarding the upgradations from the bw3.5 to bi7.0 reporting

Hi Experts,
Can any one help me how i have to upgrade the reporting tool from the sap-bw 3.5 to sap-bi7.0 . right now allready we are having the sap-bw 3.5 version right now i want to upgrade it to the sap-bi 7.0 .I need clearly with the help of the steps.
Bye.

Hi Vijay,
please check the following links:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6a19f233-0e01-0010-6593-c47af5a8df3b
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/90d58e76-e1b0-2a10-8b89-af8ceacf4b09
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/2082536#2082536 [original link is broken]
Regards
Erwin
Edited by: Erwin Buda on Feb 9, 2009 11:35 AM

RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

Similar Messages

Maybe you are looking for