Plant wise sales invoice number range

Please help me to develop user exit plant wise sales invoice number range

Go to VOFA look up for the invoice you're using (F1 or F2) in the field "No. range int. assgt." you'll see a number  (example 19), note down that number. Now go to VN01 and look up that number and change it the way you want.
Edited by: Jeevan Sagar on Sep 25, 2011 6:10 PM

Similar Messages

  • Sales invoice number range issue..

    How to maintain the number range for sales invoice..pls revert

    Go to VOFA look up for the invoice you're using (F1 or F2) in the field "No. range int. assgt." you'll see a number  (example 19), note down that number. Now go to VN01 and look up that number and change it the way you want.
    Edited by: Jeevan Sagar on Sep 25, 2011 6:10 PM

  • Sales order number range

    Hi all,
    When we save the sales order, One number will generate based on the sales document number range, client requirement was based on plant sales order number should be generate. So what are the configuration i have to do this?

    Hi,
    I would recommend what JP has mentioned in a previous thread.
    But be very careful when you develop such an enhancement. Plant is in the sales order line item table (VBAP) But the sales document number (VBELN) is in the sales order header.
    Imagine you have a sales order with 2 line items. One has "Plant 1" and this other line item has "Plant 2". In that case, how does your enhancement generate a number for your sales order? Either you should not allow users to create a sales orders with different plants in different line items (One sales order can have one plant)
    Else the best way is to take any other combination in the sales header (VBRK) to design the solution. (Like Sales Org)
    Thanks and best regards,
    Rahal

  • Excise invoice number range.

    Dear Sirs,
    For a new trading business I have assigned a new number range for commercial invoices but I am unable to create a new number range for Excise Invoices.
    Please suggest how I can create a new Excise number range for this particular business & how I can interlink it with the commercial invoices.
    Looking forward for your kind support.
    best regards,
    Rajdeep

    Hi
    As Ratish alraedy mentioned that Excise Invoice No. Range is maintained on the basis of Series Group, so check your series Group.
    T-Code : SNRO
    Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
    J_1I57FC - 57FC Number Range
    J_1IARE1 - ARE1 Doc No object based on Series Group
    J_1IARE3 - ARE3 Doc No object based on Series Group
    J_1IBOND - Excise Bonding: Bond number object
    J_1ICERT - Withholding Tax Certificates (India)
    J_1ICHLNNO - Internal number range for challans
    J_1ICONPLA - Consolidated PLA serial no. generation
    J_1IDEPINV - Excise Invoice Number for Depot Invoices
    J_1IEXCEXP - Export excise invoice number range
    J_1IEXCINV - Excise invoice number
    J_1IEXCLOC - Local excise invoice numebr range
    J_1IEXCTST - Excise invoice with intervals
    J_1IEXINEX - Excise invoice number for export
    J_1IINTNUM - Internally document number to be generated
    J_1IINTPR2 - Despatch serial number
    J_1ILIC - Excise Bonding: License number object
    J_1IPLA2 - PLA part II number range object
    J_1IRG1 - RG1 Number range object
    J_1IRG1_T - No. Range for RG1 - Excise group / Material
    J_1IRG23A1 - RG23A part 1 no. range object
    J_1IRG23A2 - RG23A part II number range object
    J_1IRG23C1 - RG23C part I number range object
    J_1IRG23C2 - RG23C part II number range object
    J_1IRG23D - Folio Numbers for RG 23D
    Regards
    Amitesh Anand

  • Excise invoice number range assignment

    Dear SAP Gurus,
    This is with regarding Excise invoice number range assignment (J_1IINTNUM, J_1IRG23A1, J_1IRG23A2)
    For the financial period April 2011 to March 2012, following number ranges exist already in SNUM.
    01---- 2011--5007393-5999999
    01---20125016369-5999999
    Till 31st March 2012, excise number ranges doesn't change. But for the next financial period from April 2012 to March 2013 there would be a new set of number ranges.
    At the time of April 2012, I will have to change the number ranges as per the new financial period. In such a case, I would be unable to change the number ranges for the financial year 2012, as the system would throw an error as "Lower limit can only be changed during initial entry"
    How to change the number range for the financial period April 2012 to March 2013, in this above scenario?
    Also can you please guide me on how to map the number ranges so that from April 2012, the system would start taking the new number ranges instead from January?Thanking you in advance..
    Regards,
    Vijay N

    Dear Mr. Lakshmipathi,
    Thank you for your reply.
    Currently, system consider the 1st one till December 2011 and for the upcoming months from Jan 2012 to March 2012, it takes second one. This is my problem here. 
    01---- 2011--5007393-5999999
    01---20125016369-5999999
    I want the system to consider the 1st one for the period from April 2011 to March 2012 and 2nd one for the period from April 2012 to March 2013. Right now, it takes for the period Jan 2011 to December 2011. Since Jan 2012 has been initiated, system is throwing an error stating to create number ranges for 2012, hence I have created the second one.
    Thanking you in advance.
    Regards,
    Vijay N

  • Excise Invoice number range assigment

    Dear SAP Gurus,
    This is with regarding Excise invoice number range assignment (J_1IINTNUM, J_1IRG23A1, J_1IRG23A2)
    For the financial period April 2011 to March 2012, following number ranges exist already in SNUM.
    01---- 2011--5007393-5999999
    01---20125016369-5999999
    Till 31st March 2012, excise number ranges doesn't change. But for the next financial period from April 2012 to March 2013 there would be a new set of number ranges.
    At the time of April 2012, I will have to change the number ranges as per the new financial period. In such a case, I would be unable to change the number ranges for the financial year 2012, as the system would throw an error as "Lower limit can only be changed during initial entry"
    How to change the number range for the financial period April 2012 to March 2013, in this above scenario?
    Also can you please guide me on how to map the number ranges so that from April 2012, the system would start taking the new number ranges instead from January?Thanking you in advance..
    Regards,
    Vijay N

    Thank you for your replies.
    Issue has been solved.
    Currently, system consider the 1st one till December 2011 and for the upcoming months from Jan 2012 to March 2012, it takes second one. This was my problem.
    01---- 2011--5007393-5999999
    01---20125016369-5999999
    I wanted the system to consider the 1st one for the period from April 2011 to March 2012 and 2nd one for the period from April 2012 to March 2013. Right now, it takes for the period Jan 2011 to December 2011.
    Solution: Changed the first month as April in Company code settings (Logistics-General > Tax on Goods Movements > India > Basic Settings > Maintain Company Code Settings) earlier it was January.
    Thank you sirs.
    Regards,
    Vijay N

  • Excise invoice number range for Depot

    Hi All,
    Pls guide me to assgin excise invoice number range for Depot.
    My client asking me to assgin domestic and export excise number range for Depot.
    pls clarrify:
    What are the purposes of the number range objects  J_1IEXCLOC and J_1IEXCINV? In which conditions 
    1. either of the two, or  2. both the objects should be used?
    Thanks,
    Muru..

    Dear Murugan
    Please search in forum you can have ready made answers available.
    System will always assigns one number for excise(where user can use Official document number) also an internal number for statistical purpose.(internal number for excise)
    You can see all these numbers in tables J_1IEXCHDR/J_1IEXCDTL.
    Just enter one excise Invoice number in the above tables & compare these with the objects J_1IEXCLOC/J_1IEXCINV...you will get more clarity
    Hope this helps.
    Phanikumar

  • Objects related to SD for excise invoice number range

    Dear gurus,
    Kindly provide the objects related to excise invoice number range  for SD module to be updated for  new financial year.
    [ for ex. j_1excloc ]
    Regards
    R.Rajendran

    provide the objects related to excise invoice number range for SD
    Following objects should be maintained in SNUM
    J_1IARE1:::::::ARE1 Doc No object based on Series Group
    J_1IARE3:::::::ARE3 Doc No object based on Series Group
    J_1IDEPINV:::::Excise Invoice Number for Depot Invoices
    J_1IEXCEXP:::::Export excise invoice number range
    J_1IEXCINV:::::Excise invoice number
    J_1IEXCLOC:::::Local excise invoice numebr range
    J_1IEXINEX:::::Excise invoice number for export
    J_1IINTPR2:::::Despatch serial number
    thanks
    G. Lakshmipathi

  • KE5Z report and plant wise sales report (Z report develped) not matching

    thanks for support
    could any body tell me in report KE5Z (proft center actual line items) .profit center wise sales is not matching
    with plant wse sales  Z report developed (based on plant - plant wise sales ) In MM01 master data maintenance  we have tagged every plant to a profit center , becoz of this mapping these report should match ? but big differnce is coming?

    Hi,
    Check on it:-
    Missing Data in the KE5Z report
    Regarding reports KE5Z &  S_ALR_87013326
    http://wiki.sdn.sap.com/wiki/display/ERPFI/KE5Z-Additionaltextfields+missing
    pherasath

  • Sales invoice number

    Dear gurus
    please help me
    Is there any link between material document and sales invoice number ?
    I have the Material document number, and P.O number with reference to these two document numbers
    can i find the sales invoice number ? if i can please provide me table and field.
    Regards

    Hi
    There is no direct link between the Material Doc. no. or PO no. and SD Billing No.
    However, from the Material No. you can trace the Delivery Documnet no. from the Table VBFA. Fill the material Doc. no in VBELN and select "J" in VBTYP_V field and execute , you will get the delivery document no.
    Now go to VL02N / VL03N transaction , fill the delivery no.and check the document flow, you will get the Billing No.
    Other way is that from PO history if you can get the delivery documnet no. then you may check the same from VL02N.
    Hope this will help you.
    Regards
    Amitesh Anand

  • FAGLL03 Sales Invoice Number

    Hi
    I want to  add the sales invoice number(VBRK-VBELN to the FAGLL03 GL display transaction, has anyone done this before? I tried to add it as a special field for GL line items but this table cannot be added.
    I know billing document is shown on the line item report but this is not the SD invoice document number, for example I have COGS account which has a Goods issue document created which shows the delivery document number in the billing document field, I want to add the Sales invoice number for the Sales Order.
    Thanks
    Joe

    Hi Joe,
    Please use O7R3 to add the field.
    After the Import of transport check Table T021S if the field added is successfully imported.
    Also check the note: 984305 for more information.
    Rgds
    Shashi

  • Internal sales employee number range

    Dear experts,
    Under the same client in SAP system, different company codes can NOT have different Internal sales employee number ranges in the standard SAP, right? In other words, only one number range actiavtes for all the company codes as long as they are against the same client.
    Plz corret me if I'm wrong. Many thanks.
    Example:
    log on SAP - client 800
    client 800 has 2 company codes: 1001, 1002
    Request:
    sales employee under company code 1001: 10xxxxx
    sales employee under company code 1002: 20xxxxx
    ps. Currently HR module is not applied to client 800. Two years later, HR will be applied.

    Hi,
    It is possible with userexit NUM_NR_ORDER
    ask abaper to add the fields like company code
    thanks,
    Rahul

  • Sales employee number range

    Dear experts,
    Under the same client in SAP system, can different company codes have different sales employee number ranges? If yes, should I just activate the number range? You know, there's no number range assignement to company codes.
    Plz help. Many thanks.
    Example:
    log on SAP - client 800
    client 800 has 2 company codes: 1001, 1002
    Request:
    sales employee under company code 1001: 10xxxxx
    sales employee under company code 1002: 20xxxxx
    ps. Currently HR module is not applied to client 800. Two years later, HR will be applied.
    Edited by: Cathy on Sep 2, 2010 2:46 AM

    There shouldn´t been any troubles with different number range. You have to be sure that you have the different number range create in PA04 and that in feature NUMKR you asign a diferent number range to each employee subgroup. For example, if you have number range "01" for sales employees and number range "02" for the rest of employees, your feauture must be something like this:
    Numkr
       Employee Subgroup
            SE (sales employee)
              01
            else
              02
    After you activate the feature it should work ok, if everything is done correctly in PA04 and in the feature.
    If it´s not working I am not sure what could be happening.
    Hope I can help you.
    Regards,
    Edoardo

  • Escise Invoice number range

    Hi Gurus,
    I created the number range for the objects using SNRO.
    But when i am creating the billing document and excise invoice in month of march, using posting date of say 270307, it is taking the Excise document no from year 2007 number range...that is starting from 1.. although it should happen from 1 April..and it should post this excise invoice in year 2006. but it is posting in 2007
    If i don't make the number range for year 2007, then while creating the Excise document i am getting the error message " Update wa terminated".
    Could you please help..
    Thanks & Regards,
    Divya

    T.Code: SNRO
    <b>J_1I57FC</b>     57FC Number Range Object
    <b>J_1IARE1</b>     ARE1 Doc No object based on Series Group
    <b>J_1IARE3</b>     ARE3 Doc No object based on Series Group
    <b>J_1IBOND</b>     Excise Bonding: Bond number object
    <b>J_1ICERT</b>     Withholding Tax Certificates (India)
    <b>J_1ICHLNNO</b>     Internal number range for challans
    <b>J_1ICONPLA</b>     Consolidated PLA serial no. generation
    <b>J_1IDEPINV</b>     Excise Invoice Number for Depot Invoices
    <b>J_1IEXCEXP</b>     Export excise invoice number range
    <b>J_1IEXCINV</b>     Excise invoice number
    <b>J_1IEXCLOC</b>     Local excise invoice numebr range
    <b>J_1IEXCTST</b>     Excise invoice with intervals
    <b>J_1IEXINEX</b>     Excise invoice number for export
    <b>J_1IINTNUM</b>     Internally document number to be generated
    <b>J_1IINTPR2</b>     Despatch serial number
    <b>J_1ILIC</b>     Excise Bonding: License number object
    <b>J_1IPLA2</b>     PLA part II number range object
    <b>J_1IRG1</b>     RG1 Number range object
    <b>J_1IRG1_T</b>     No. Range for RG1 - Excise group / Material
    <b>J_1IRG23A1</b>     RG23A part 1 no. range object
    <b>J_1IRG23A2</b>     RG23A part II number range object
    <b>J_1IRG23C1</b>     RG23C part I number range object
    <b><b>J_1IRG23C2</b>     RG23C part II number range object
    J_1IRG23D</b>     Folio Numbers for RG 23D
    You require to maintain appropriate number ranges for above relevant number range object.
    Regards,
    Rajesh Banka

  • Incoming invoice number range per company code

    Hi!
    I have a doubt.
    Is there the possibility of create incoming invoice number range per company code?
    I need the MM doc, not FI doc.
    Thank's!

    Hi
    If the settings available in OMR4 and OMRJ don't cover your requirements, try with enhancement LMR1M003.
    Regards
    Eduardo
    PD: I found it, see Note 452127 - MIRO: Standard number assignment per company code, you have a sample of coding for this enhancement
    Edited by: E_Hinojosa on Jul 11, 2011 6:37 PM
    Edited by: E_Hinojosa on Jul 11, 2011 6:38 PM
    Edited by: E_Hinojosa on Jul 11, 2011 6:42 PM

Maybe you are looking for

  • Firefox crashes every time I double click on the web screen

    Okay, this may sound funny and I've tried searching the web to no avail. I've just recently upgraded my Firefox and so far it's working...until when I double-clicked on the web page (the fast way to block a whole paragraph to be copied). The Firefox

  • How to use javascript to access item VALUES on a portal form

    Hi, I want to pick up VALUE of an item on a portal form from the on click event of the save button. I know there is a way to acces the item name and assign a value to that item. For example, setItemValue(this.form,'UNIT_NAME', this.value) If I use th

  • Can we call an Standard API from the BPM process

    Hi, Can we call a Public API from within a BPM Process. Can you please suggest the procedure for achieving the same. Also wanted to know the procedure to insert into Standard Interface tables and called Standard Interface program to Create objects li

  • Remove padding on menu bar and toolbar

    Hi, Is there a way of removing the extra margin at the bottom of JMenus and JToolBars? I've highlighted the margins in red so you can see them better: http://img410.imageshack.us/my.php?image=paddingapp4rm.png Also, it it possible to remove the drag

  • Having trouble with the HTTP Server vi

    I'm having trouble using the HTTP Server program to view the front panel of my program remotely. When I initially start the server program everything works fine. However, the program hasn't been able to run for more than one or two days at a time bef