Playing artists and playlists on 160GB classic

Is it possible to shuffle songs on the classic when playing a certain artist or playlist back?

Hey there,
If you head to Settings->Shuffle you may be able to find the answer you are looking for. I believe it only shuffles songs and albums, but if you left it on songs and listened to a playlist, it would also play them at random. Hope this helps.
B-rock

Similar Messages

  • Can I get my music collection (play counts and playlists inc.) from my iPad to my PC?

    I had a problem with iTunes where I couldn't add songs to the library because I didn't have sufficient permissions to edit my iTunes library (even though I did). After a few days of tweaking administrator permissions and the like, I got really annoyed and tried re-installing iTunes to see if it would make it go away. Whilst the iTunes64Setup.exe file was downloading, I was fiddling with the .itl and .xml files in my iTunes folder and when I re-installed iTunes I had lost all my play counts and playlists. When iTunes opened, I assumed it must have overwritten the two files because when I looked at them in Windows Explorer they were both a lot smaller in size.
    Obviously, I didn't sync my iPad or iPhone after this had happened, so I still have the playlists and play counts stored on them. Is there any way I can:
    a) Recover a previous version of the .xml and .itl files on my laptop and use them to restore my plays?
    or
    b) Use iTunes Match to restore them onto my laptop?
    I'm not sure about b). When you subscribe to Match, does it analyze your current library and then save it to the Cloud so you can redownload it?
    I'm going to buy the new iPhone when it is released in the next couple of months so I'm willing to jailbreak my iPhone 4 if need be.
    Thanks for any help.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Or see Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT1386 I have selected to only sync artists and playlists I select, but all of my music in itunes is still being synced to my iphone

    I have a TON of music in itunes but I dont want it all on my iphone. I have selected to sync only Artists and Playlists I select. For some reason all my music is still being synced to my iphone. I have made sure that my iphone is set to only sync things downloaded to the device. Help?

    Did you transfer all the purchased music from the old phone to iTunes?  If not, connect it to his computer, open iTunes and go to File>Devices>Transfer Purchases.  Then sync his new phone again to sync the music to his phone.  Note: this will only transfer music purchased from the iTunes store.  Music from other sources such as his CDs should already be in his iTunes library.

  • Problems playing albums and playlist solutions

    I am using iTunes 11 on a Win 7 platform and find that any music imported prior to v11 update will only play one or two tracks from an album.  I find I have to highlight the whole list and add to play next. I also have similar issues with playlists. Ok on newly imported though. I can just hit the play icon and the whole album is loaded to the next play list. 
    I have run the repair tool over the program, but no improvement yet. Any suggestions?
    John

    Which burn speed do you use in iTunes? "Best"? If so, try lowering the burn speed to 8x or less.
    Patrick

  • How do transfer my songs AND playlists from iPOD classic to a NEW laptop

    How do you transfer both songs AND playlists from an iPOD to a new laptop? I have read a few posts about this, but none seem to talk about transfering the PLAYLISTS. I understand there is a manual method since the iPOD is essentially viewed as a hard drive by a windows based machine/PC and there are third party applications to provide a more automated process.
    So can playlists be transferred? If so how? Or will i need to recreate all my playlists? It is not the end of world, rather just tedious. Are there any "gotchas"?
    Thanx

    I also have a similar problem. Lap top crashed - new lap top have VISTA (I know...).
    Using my ipod as a external hard drive - I have loaded all the tunes onto a new folder on the desk top. I then loaded all the files into the itunes library and have upload them on the new itunes on the new lap top - all good. They are now on the new itunes library and my ipod
    However NONE of my purchased items have been transfered. Issue is that the files on the Desktop folder will not show which are purchesed and which are imported from CD - how do I find and then transfer my purchased songs...
    Thanks

  • Play Counts and Playlist Transfer

    I have a new PC and have saved my existing library to the exterbal hard drive. The new PC came with the latest itunes program and although I can transfer the music into the new itunes program, my playlists and play counts do not come with it.
    Any thoughts on this?
    Ta Very much

    I suspect you've left something out of the mix in the transfer...
    These are two possible approaches that should work to move the existing library to the new laptop.
    Method 1
    Backup the library with this User Tip.
    Restore the backup to your new computer using the same tool used to back it up.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase are reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Should you be in the unfortunate position where you can no longer access the original library or a backup see Recover your iTunes library from your iPod or iOS device.
    tt2

  • Most Played Artist Playlist

    I have created a couple playlists before e.g. most skipped but is there any way of creating a top played artist smart playlist? thankssss

    Hi, welcome to Apple Discussions.
    It can't be done with iTunes as it currently exists as it has no way of generating aggregate properties by album artist. You'd really want some form of raw SQL query interface for that type of task. I guess it could be achieved via a script if you were to prepared for it to take some time reading all the data and collating the information.
    tt2

  • Export list of artists and their albums?

    I am trying to export a list of artists and albums on my classic. I can find the Library/Export Library to xml which is way more data than I need in a format I don't, and the Library/Export Playlist to txt which is also way more data and in such an unformatted manner I don't know how to use it.
    Is there a way to just get a list of the Artists and which Albums are in iTunes? Either by using the methods above in some way you'll need to explain, or another way?
    Thank you.

    I figured out how to bring the txt into Excel and clean it up so it only has what I want.

  • Songs and playlists disappearing from iTunes library

    I desperately need iTunes help.  Anyone an expert out there?  I have spent A LOT if time transferring songs from my computer into my itunes library, and creating Playlists.  Then I sync my phone, and all seems fine.  But when I go back into iTunes to put another song on my phone, all the songs are gone.  Everything that I put into iTunes is gone, all playlists, and all the songs.  It's as if I was never in there.  This has happened twice now.  I don't want to recreate my library and playlists every time I open iTunes!!!!  But I can't just add one new song to my phone either, because as soon as a sync, everything that is already on my phone will be gone!!!  Grrrr!!  Anyone know what's going on??  The songs were not purchased through iTunes, if that makes a difference.

    Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
    The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
    See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
    tt2

  • HT204406 synch music and playlists

    I used to be able to synch my iTunes artists and playlists by checking them.  With iCloud I cannot pick and chose.  My playlists on my MacBook iTunes does not match my iPhone playlists.  What should I do?

    http://support.apple.com/kb/HT1386

  • Genius on 160GB Classic Plays Wrong Version of Song (Title & Artist Match)

    I have noticed a problem with Genius right out of the box with my 160 classic. The problem still exists after the latest software update for the device.
    If I select a song and start Genius it will sometimes play another version of that song instead of the selected one. For example I have a song by "Artist A" titled "Song A" on "Album A" it will sometimes play "Artist A", "Song A", from "Album B". I've narrowed it down to it always playing the one that comes from the first, alphabetically, album on which the track occurs. So if the song and artist match but there is a version of the song on "A Album", "B Album", and "C Album" it will always put the "A Album" version in the playlist and never use the "B Album" or "C Album" versions even when they are directly chosen.

    Have you reported this problem directly to http://www.apple.com/feedback/ipod.html ? It's possible that they are either unaware of it's existence or that it is the designed behaviour which could perhaps benefit from being clarified in online support.
    Given, for example, the general (I presume intentional) inability of the iPod Classic firmware to discriminate between albums of the same title but different album artists, I would guess that the underlying logic for Genius may differ from what you or I might expect or assume at first glance. From your description it would seem that Genius is based on considering which artist/track name pairings fit together, ignoring the album information altogether in this context. As popular tracks are often released on many compilations and anthologies this would seem to have some merit. If Genuis thinks song Y fits well with song X it doesn't really matter which version of song Y it uses (assuming of course they are identical). With this in mind I would venture to suggest that EVERY track Genius selects is from the first album (alphabetcially) you possess that features the given song by the given artist. This aspect is only readily apparent if choose a different version as your initial song where you have multiple instances. If the songs are identical then I don't really see a problem, other than the mild surprise that what you pick isn't what you get, but if you have significantly different versions of the same title and prefer one over the other then I guess the workaround would be to rename the tracks in order to distinguish them. E.g. add the otherwise redundant \[Live\] tag onto the titles of tracks from a live album so these are not selected in error when you try to create a Genius mix based on the studio version of the same track.
    tt2

  • My ipod starts voicing song data, artist data, and playlist data while I am listening to music.  Is this a feature or a defect?  I do not know why it occurs, but the only way to stop it is to stop the music then play the playlist again.

    My ipod starts voicing song data, artist data, and playlist data while I am listening to music.  Is this a feature or a defect?  I do not know why it occurs, but the only way to stop it is to stop the music then play the playlist again.

    To make sure voiceover is off, you need to go to summary screen then click the "Configure Universal Access" button. Then you will get a dialog where you can make sure voiceover is off. All of the boxes in the dialog should be unchecked.
    i

  • My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

    My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
    I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
    Can anyone please help?

    Hi gscoops,
    Welcome to Apple Support Communities.
    You may find the steps in our iPod Troubleshooting Assistant helpful:
    http://www.apple.com/support/ipod/five_rs/classic/
    Best,
    Jeremy

  • Extra Playlists downloading to 160gb classic

    I have had and iPod for several years now, so I know how to use iTunes and sync an iPod. I just purchased a 160gb classic and configured it to download only selected playlists with checked songs. However, it also downloads 5 additional playlists that I didn't select. I created a new playlist, moved the music into it, and changed my iPod to use the new one. It still downloads the others. It does, however, download the one I designate.
    Any idea what is heppening?

    Bradley Kendall wrote:
    I have had and iPod for several years now, so I know how to use iTunes and sync an iPod. I just purchased a 160gb classic and configured it to download only selected playlists with checked songs. However, it also downloads 5 additional playlists that I didn't select. I created a new playlist, moved the music into it, and changed my iPod to use the new one. It still downloads the others. It does, however, download the one I designate.
    Any idea what is heppening?
    Nope, but it happens to me too.. I manage 4 iPods and I seem to get the odd extra playlist listed which is not selected to be copied. They're all smart playlists and are empty on the iPods they're not intended for. I've been able to remove them sometimes by switching to manual sync, deleting & switching back to auto again.
    tt2

  • IPhone plays only one playlist and won't others

    Hi guys,
    can anyone help me; I have my iPhone for so long time, always updated with latest version of software, but recently after latest update 3.1.3. iPod plays only one playlist and won't play any other. Also can't enter any other artist file or videos. When I try to, Ipod closes! The rest of phone works fine.
    Could it be problem with latest update? How can I reset latest update?
    Thanks!

    The latest update works fine for most people, but your's might not have been applied correctly for some reason.
    Try the standard troubleshooting steps in order:
    Restart your phone: Press and hold the Sleep/Wake button for a few seconds until a red slider appears, and then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Reset your phone: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
    Restore your phone: Restore: http://support.apple.com/kb/HT1414
    Make an appointment to have an Apple Retail Store Genius look at your phone. http://www.apple.com/retail/geniusbar/
    If you're in the US, call U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    If somewhere else, find the contact number here: http://www.apple.com/support/contact/phone_contacts.html

Maybe you are looking for

  • Issue regarding the Finder

    I went to the Disk Utility and performed a "verify disk permissions", after which I ran the repair disk permissions. After that it said something was modified and it would not be repaired. I've been having some odd issues lately, namely, System Prefe

  • 4k display: Limited scaled resolutions when in portrait?

    Hi, I've got a MacBook Pro, late 2013, retina, discrete graphics, Yosemite.  I like it.  Also have a Dell P2815Q monitor.  I hate it.  I would, however, like to gain better control over the resolution of the Dell display when in portrait mode.  Curre

  • Access a received message after transformation

    Hi, in my BPM, i am receiving an Idoc transfor it make a BAPI Call. this works fine. After this i want to transform the BAPI-response and the original IDoc to a new message for the next BAPI-Call. But i have no data in this original IDOC. I created a

  • I am trying to update my os on my macbook air, but it will not even start.

    i

  • Query builder authorization question

    Hellow Experts, I have a couple of questions related to the example given by SAP on line help http://help.sap.com/saphelp_nw70/helpdata/en/41/05453caff4f703e10000000a114084/content.htm In the case of Analyst 2, authorization object S_RS_COMP is shown