PLEASE CLICK!!!! MAJOR PROBLEM!!!!!!!!!!!!!
Hello Everyone! OK this may be a silly question to ask but I just got a new I-pod Touch but I do not know how to use it. I want music, games, and Internet on it. What do I do? Please don't use words like Bluetooth or Wi-fi because I'm just 12 and I will not know what you are talking about. PLEASE HELP!!!!!!!! MAJOR PROBLEM!!
Look at the manual for the ipod touch and it will explain everything you need to know on how to sync and what will sync and how to connect to the internet through a wireless network (Wi-Fi).
http://manuals.info.apple.com/enUS/iPod_touch_3.1_UserGuide.pdf
Similar Messages
-
I have a p4 2.8ghz northwood, msi 865pe platinum, 1gb corsair 400 3200 c2pro, 9800xt, but have swapped for 9700 pro and get same problems.
Firstly i was playing lineage and the game had corrupted textures a lot, this had never happened before, this soon spread to windows and the desktop and start bar were most affected and were majorly fecked, not long after the bios was pink and so was memtest with smileys also in pink. Now the computer also turns itself on when power is 1st connected, and sometimes the video card outputs nothing. Also the corsair ram leds, have not come on sometimes, this coincides with one of the other problems i am sure.
please helpPlease post your power supply specs - see here: Moan Guide
You should also run Memtest86 -
Please Help | Major Problems | Lost Job/Need Fix
Hello guys, I have an Early 2011 Macbook Pro with many problems and I don't know where to begin. There are so many things that Ill just list a few to get started.
Here are my specs:
MacBook Pro (15-inch, Early 2011)
2.2 GHz Intel Core i7
8 GB 1067 MHz DDR3
Intel HD Graphics 3000 512 MB
NOTE: about a week ago I reinstalled the OS to fix a problem temporarily Ive been out of work for 3 months now because of these problems and am now out of money so I cannon afford to take it to a shop or the Apple store for fixing. If I cant get this fixed ill be unable to start my work again and that would be terrible.
SOME PROBLEMS TO START: I really need someone/something to look at my computer and determine ALL the problems with it both internal hardware and also within the OS itself.
*The core of all this is that i NEED windows 7 installed on my mac for work and bootcamp wont allow me to do it for some reason, I also don't want it installed virtually. I want windows installed cleanly. If i could install windows in place of the Mac os and then bootcamp Mac OS I would rather do that.
- Console has so many errors its crazy.
- Computer randomly restarts when I play games or am watching a movie
- I CANNOT install Windows 7 via bootcamp or any other method
- My Optical Drive failed so I have removed it so my only option is to install windows via a usb drive
- For some reason my External HDD that I save everything on now all of a sudden wont read.
- Disk Utility reads it and if i verify it and repair it it tells me everything is ok but then also reads that its updating drivers but nothing ever happens
I THINK IF I CAN GET THESE PROBLEMS FIXED THEN THE OTHERS MIGHT GO AWAY
Please respond asap as every minute my laptop sits like this is another dollar that I am losingMake an appointment at an Apple store genius bar and have them test you MBP and define what is exactly wrong with it. The evaluation will be FREE!
Ciao. -
HELP PLEASE! Major Problem with FCP Project
OK I am starting to panic. I was editing a wedding video for a client on this 150GB proMAX external hard drive. Everything as fine until this morning. Now when I go to open the project I always get a fatal error.
What happens is the project begins to load but then gets to one unrendered point on my timeline and it just hangs. I get that spinning ball of death and I'm not sure why. Then the program "quits unexpectedly." I have tried this several times and consistently get the same result.
I have tried opening this project on my MacBook and the same thing occurs. Can anyone PLEASE help me with this issue? I would appreciate any helpsounds like a corrupted clip.
disconnect the proMAX drive first, then open the project.
when the project has opened (with all media offline) then reconnect and mount the proMAX drive.
now you can start to reconnect the media ... but do it in parts, not all in one go. by a gradual process you should eventually discover which clip is causing the crash .... when you find out the corrupt clip, recapture from source.
good luck
Andy -
I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!
Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane. -
Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....
I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing
-
Can anyone help me. I have iPhoto 9.2 and Mac OS X 10.7.2.
Every time I open iPhoto 9.2 and try to go to photo stream iPhoto quits unexpectedly. When I reopen I get "iPhoto has detected inconsistencies in your library. Please click Repair to avoid any potential problems."
I have read plenty of the posts on the subject and it seems that deleting the "3ivx" fixed the problem. I looked at the detaied reports and see where it says "
Library/Application Support/3ivx" etc..
On my report it says "/Library/Application Support/iLifeMediaBrowser/*/iLMBiPhoto8Plugin". Does this help with an answer?I am also having this crashing problem. I am running lion on a 2010 mac mini. My iPhoto library is kept on an external drive. I just upgraded to iPhoto 11 and everytime I try to enable photo stream the app crashes. I have tried all the above suggestions, including re-installing iphoto from the Mac App store. Below are the first 50 lines of the error message. Any help would be greatly appreciated.
Process: iPhoto [430]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 9.2.1 (9.2.1)
Build Info: iPhotoProject-628000000000000~1
App Item ID: 408981381
App External ID: 4641130
Code Type: X86 (Native)
Parent Process: launchd [160]
Date/Time: 2011-11-02 22:33:22.628 -0500
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 526713 sec
Crashes Since Last Report: 9
Per-App Interval Since Last Report: 4439 sec
Per-App Crashes Since Last Report: 8
Anonymous UUID: 8147E0FC-2622-4A56-920E-44498E48B55B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/iPhoto.app/Contents/MacOS/iPhoto
__TEXT 0000000000001000-0000000000d1b000 [ 13.1M] r-x/rwx SM=COW /Applications/iPhoto.app/Contents/MacOS/iPhoto
Application Specific Information:
objc[430]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.iPhoto 0x00824501 0x1000 + 8533249
1 com.apple.iPhoto 0x001678d6 0x1000 + 1468630
2 com.apple.Foundation 0x91bdff49 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
3 com.apple.CoreFoundation 0x95508ff3 ___CFXNotificationPost_block_invoke_1 + 275
4 com.apple.CoreFoundation 0x954d3d78 _CFXNotificationPost + 2776
5 com.apple.Foundation 0x91bcb136 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
6 com.apple.Foundation 0x91be03ca -[NSNotificationCenter postNotificationName:object:] + 55
7 com.apple.iPhoto 0x0016716a 0x1000 + 1466730
8 com.apple.iPhoto 0x00167111 0x1000 + 1466641
9 com.apple.iPhoto 0x0015c6f4 0x1000 + 1423092
10 com.apple.CoreFoundation 0x95520e1d __invoking___ + 29
11 com.apple.CoreFoundation 0x95520d59 -[NSInvocation invoke] + 137
12 com.apple.RedRock 0x01d62e61 -[RKInvoker _invokeTarget:] + 33
13 com.apple.CoreFoundation 0x9551e091 -[NSObject performSelector:withObject:] + 65
14 com.apple.Foundation 0x91c1cf64 __NSThreadPerformPerform + 503
15 com.apple.CoreFoundation 0x9549584f __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15
16 com.apple.CoreFoundation 0x95495206 __CFRunLoopDoSources0 + 246
17 com.apple.CoreFoundation 0x954bf0d8 __CFRunLoopRun + 1112
18 com.apple.CoreFoundation 0x954be8ec CFRunLoopRunSpecific + 332
19 com.apple.CoreFoundation 0x954be798 CFRunLoopRunInMode + 120
20 com.apple.HIToolbox 0x93bcca7f RunCurrentEventLoopInMode + 318
21 com.apple.HIToolbox 0x93bd3d9b ReceiveNextEventCommon + 381
22 com.apple.HIToolbox 0x93bd3c0a BlockUntilNextEventMatchingListInMode + 88
23 com.apple.AppKit 0x97b27040 _DPSNextEvent + 678
24 com.apple.AppKit 0x97b268ab -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
25 com.apple.AppKit 0x97b22c22 -[NSApplication run] + 911
26 com.apple.AppKit 0x97db718a NSApplicationMain + 1054
27 com.apple.iPhoto 0x0001159a 0x1000 + 66970
28 com.apple.iPhoto 0x00010a29 0x1000 + 64041
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x91bbc90a kevent + 10
1 libdispatch.dylib 0x9a5bbc58 _dispatch_mgr_invoke + 969
2 libdispatch.dylib 0x9a5ba6a7 _dispatch_mgr_thread + 53 -
Hello, I've upgraded my Ipad2 to iOS7. I'm facing two major problems. First, I can't connect to the internet(which seems like a common problem), no Wifi connectivity as well. Second, the Autocad WS app doesn't work. It keeps asking for a username/passcode combination. Please help me guys. I will be genuinely grateful.
CheersDoes my problem has anything to do with SSL for mail settings? Cause when I tried re-adding it says something that I should try without SSL, and I did what you said and it gives me this "The IMAP server pop.mail.yahoo.com is not responding. Check your network connection and that you entered the correct information in the incoming mail server field". Ahh.. this is so annoying, Apple what are you doing to me?! Or is Yahoo doing this to me?!
Thank you for your time. Sorry it doesn`t work. -
Another major problem after 10.4.8 update
Hi everyone,
I've never had any major problem with any Mac OS update yet until I had the crazy idea to install the 10.4.8 update last week. I wish I would have never done this. This is also the first time I wish I had Windows since I can't remember such a big screw up with any Windows update I've seen.
But back to the problem, after the installation on my old 12" Powerbook (1.33GHz with an additional 1GB of RAM) the system got really slow. The harddisk was accessed all the time, so after reading some forums people said that Spotlight would run a re-index of the database which made sense to me. So I just let it run over night and the next day the permanent HDD access was gone, but whenever I tried to access a folder it took ages (HDD access again...). So I decided to reboot which took about 20 minutes until the desktop fully showed up and was useable. Again, I had HDD access all the time. After two hours or so it stopped again, but as soon as I clicked on something, for example a folder, it started again. At that point the Powerbook was simply not useable anymore because I couldn't even start a program.
So I start browsing through several forums and many people suggested to re-install the 10.4.8 combo update again. That's what I tried, after a while I could only hear the HDD access running and running. The installer said 29 minutes left and progress bar didn't move any further. I had it running for over a hour like that. I couldn't abort it, I could start no other software, nothing. It still showed 29 minutes and the HDD was accessed all the time.
So I restarted the Powerbook since this obviously wasn't going anywhere. Apple logo came up, the little gear spinning thing as well and of course I could hear the HDD being accessed. After two hours of doing this I aborted and decided to boot into safe mode to install the combo update. Again, same situation. HDD running like crazy and Apple logo, but no login screen coming up.
So I decided to boot from the Install disk and have the disc utility check the HDD... but of course after selecting the language and clicking continue at the screen when the HDD first shows up it starts to access the HDD... I can't select the HDD, I can't even get to the DU, nothing. It's been running like that for hours now. It seems like whenever the HDD is involved in something the accessing starts and just keeps running without any result. The HDD is getting very hot already.
I've never run into such a problem before, so I'm kinda clueless what to do next. I don't mind to reinstall, but I have some files on that HDD that I need (some notes in text files, some emails and so on).
So at this point I can't boot into OS X to access the HDD and I can't use the installer disk to access DU or even reinstall if I wanted to. I don't think the HDD is broken, this only happened after the 10.4.8 update. It just seems that every HDD access takes hours and hours longer than it should.
What options do I have to get my data from the disk? I'll try to install OS X to a new external drive tomorrow (need one with firewire first). If that doesn't help I thought about pulling out the HDD from the Powerbook and hook it up to my MacMini or an iMac.
If anyone has any other suggestion or solved a similar problem before, please let me know.
Best,
StephanSee my FAQ:
http://www.macmaps.com/WIFI1048.html -
Ive had my iPod Mini for 2 years roughly I think now and havent had any major problems at all.
Yesterday its started playing songs without my touching any buttons and skipping to the next song in exactly the same place as the one before started ~ 2.05 minutes.
When I turned it off it still continued to play random songs.
I tried playing a song it played for two seconds then skipped to the next and played that for a bit then skipped to the next until the playlist had finished where it then returned to the main menu and played a completely random song not even on the playlist i chose previously.
I have not misued my ipod, dropped it, spilt water on it or damaged it in any way.
I have restored it to Main Factory settings and it has done nothing.
If any of you have experienced the same problem or have any ideas of how to help please reply.
I would be truely gratefulFor Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
If does not work, please find a Mac computer
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
I could be wrong, I believe that it could have some bad sectors on the HD of your iPod, doing a full format can only solve 80-90% -
I want to reinstall CS4 as it has been doing some strange things regarding printing, etc. However, when I did this before, it created a major problem and I ended up buying a new computer because no one could figure out why it kept hanging up during the installation. Hours on the phone, no results. I'm scared to do it on this computer. Should I try? Not even the Adobe support could get it resolved. I believe it was somehow reading a product number that could not be deleted or something, and nothing worked.
Message was edited by: Doug DougHello, as an addition:
In your case I would download a really new trial version of your program(s) in question and change it/them into a "real" version later, BUT because you said, that you "re-installed" already, so it will become a little bit more complicated. It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool" as Keith wrote.
Here an advice for that (The order varies depending on your individual needs. Please read all my proposals first, so you can better choose the first step:)
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part - as it seems unlike you - had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter -
Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy
I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble. -
Posting this on behalf of my mother. (who BT have cut off in the course of an ongoing dispute over payments). Since she signed up with BT, There have been a number of issues, ranging from deceptive selling practices, refusal to provide sales call transcripts, breach of contract with regards to payment terms, outright hopeless customer service, both with regards to addressing problems, alongside a lack of proactive company-client interactions, and finally, the complete removal of all service whilst payments are in dispute, effective leaving my other unable to contact BT - her supplier - from her own home - this effectively acts as coercion on BT's part.
My mother signed up to BT as a result of an inbound sales call, where BT's representative and my mother, to our joint best knowledge (as BT have yet to send recordings and transcripts of the call) that my mother could both a) Pay her bill monthly, as opposed to quarterly, and b) that the package my mother was signing up to included unlimited broadband. My mother later phoned BT to sign up after comparing the deal she had been offered with her current TalkTalk package.
While my mother admits she cannot recall the exact content of her inbound call, it should be remembered that she had discussed terms with a representative prior to the call, and was in her knowledge, agreeing to those terms. If the BT representative she was in contact with when she made contact did not correct my mother, or firmly outline the terms, BT can arguably have been seen as changing the contract terms without notifying the signing party - a practice which is, to my knowledge, illegal, and if not, certainly immoral, and not a good way to conduct business.
The main sticking point is the broadband charges, which are the charges in dispute. My mother signed up under the presumption that she was on the unlimited option (later discovered to be option 3) due to the household being heavy users due to the data using devices in the household at the time being as follows:
2 games consoles with online capabilities
3 smartphones
1 desktop computer -mine- with a premium Spotify account, regularly used
Another desktop - my sister's - which streamed a large amount of content through iPlayer and YouTube
1 laptop, belonging to my mother's partner, with a recently opened Spotify Free (unlimited ad-supported streaming for 6-months) account, again resulting in a large amount of streaming
With this in mind, my mother had been led to believe that she would be on a similar package to her TalkTalk package at the time, which had Unlimited broadband (Subject to fair use). Given that the representative which made the outbound call which started the process, to our knowledge, confirmed both terms and prices, this could be considered as an oral contract - legally binding in both Scots and English Law - meaning that any changes made without notification would surely render the contract null and void.
My mother and the household then proceeded to use the service on the assumption that it was an unlimited one. The first sign of trouble arose when the first bill arrived after 3 months as opposed to after the first, despite the terms agreed being monthly payments. Whilst the bill stated that my mother was signed up to option 2, my mother didn't contemplate that this was a lesser package than the one agreed to, and instead thought that the abnormally high bill was down to installation charges etc. and thus, the household continued to use the service on the assumption of it being an unlimited one.
When the 2nd bill (April 2012) came through, it became clear that the bill was high due to usage above the download limit - a limit which my mother was unaware existed, due to her being under the impression that the terms she had agreed to included unlimited broadband. Whilst BT have pointed out that they sent notifications to my mother's BT account, My mother feels that it would have been good customer service to phone her and make her aware that the package she was on wasn't adequate -mainly because it wasn't what was agreed to- and if she would like to upgrade - to the package she had agreed to.
My mother refused to pay this bill until the issue was addressed, and indeed she offered to pay the price differential between option 2 and option 3. Bearing in mind my mother had been mislead, this is arguably, on her part, a noble gesture.. BT instead refused to agree to this course of action and instead blocked both in and outgoing calls; Stopped BT vision; and cut off her broadband. This was temporarily resolved when my mother pointed out that the payments were being withheld due to a dispute, and service continued until a couple of days ago, when all services were again discontinued. This includes the ability to contact the emergency services, as my mother found out when my estranged father – under a non-harrassment order and just released from prison – attended the house, leaving my mother unable to contact the police, potentially putting her life at riskWhilst I understand that this is BT's prerogative, I wish to point out that they steadfastly refused my mother's resolution. Her contact with BT's Call centres has been, to put it lightly, unconstructive, with Call centre reps acknowledging that the charges WERE excessive, but that Management were unwilling to budge. This to me, smacks of a deliberate attempt to NOT resolve the problem by BT.
As my mother's attempts at engaging with BT customer service have been unproductive, I have offered to take it up on her behalf.
To summarise:
My mother was missold a service after having been misled -whether by accident or by design- with regards to her contract (Oral contracts being binding in both Scots and English law)
My mother was notified of going over "broadband limits" which she should not have been subject to, through a channel she was not aware of.
BT actively placed my mother in harm's way by cutting off ALL services – including contact of the emergency services from the landline – without any notification
My mother's most recent bill, dated June 2012, contains the following charges:
BT Home Hub 3.0
13 Jun 12
You have left BT Total Broadband within 12 months ? so this charge is for
the cost of your broadband equipment
£46.00
Broadband and Calls
13 Jun 12
You cancelled this service while on contract - so this charge is for your
Package to the end of your contract
£148.93
Broadband Access Service
13 Jun 12
This charge is for the cessation of your Broadband - for further
information please see http://www.bt.com/ceasecharge
£30.00
Final Payment for Vision+ box
13 Jun 12
You cancelled your BT Vision service whilst in contract - so this is the
deferred payment charge for this service.
£199.00
BT Vision Unlimited contract for 12 months
13 Jun 12
You cancelled this service while on contract - so this charge is for your
TV to the end of your contract
£10.06
All pertaining to consequences of cancellation
+ excessive usage charges (£50 for the period April - June 2012 inclusive)
+ £78.59 in what, to my knowledge, is the disputed payment for excessive broadband
+ the following
Other one-off charges
16 Apr 12
Charge for reconnection of line after outgoing calls were barred
£12.00
Late payment charge
£7.50
the total of the above comes to £582.02 . However, due to my above point, Any payments with regards to cessation of contracts are arguably null and void due to the nature of the contract (altered without consent of the signing party). none of the goods or services above would have been used or sought under the terms BT were apparently working under. In consideration that the above value is more than that of the bill itself, my mother would be happy with the following:
1: A written apology, resumption of her services ( Free Evening and Weekend calls, BT Vision) PLUS a complimentary upgrade to BT Infinty option 2 Broadband services at the rate of BT option 2 until October 2012, at which point my mother is free to either continue using the service at the rate advertised as of June 21st, 2012; or to cancel her BT services without pain or penalty - including but not limited to package cancellation charges; service cessation charges; charges for equipment, and any and all other charges triggered by contract cancellation
OR
2: A written apology; cessation of any and all services without pain or penalty - including but not limited to package cancellation charges; service cessation charges; charges for equipmentl and any and all other charges triggered by contract cancellation; a refund of £46.92 - the difference between the bill, and the charges pertaining to cancellation of the breached contract. + A £50 goodwill payment in acknowledgement that BT's actions actively placed her in harm's way
My mother is open to discussions with BT at the email address provided to the company. Contact details removed from public forum... - Mod
This post also serves as 8 weeks notice from today (June 21st, 2012) prior to the opening of a dispute with the Communication's Ombudsman as required by Ofcom for the filing of a complaint to BT's ADR scheme. In addition to this, an edited version of the post will be sent to media which deal specifically with consumer rights if there has been no contact prior to July 12th, 2012. these will include, but are not limited to BBC's Watchdog.Hi Ross,
If you would like the moderator team to investigate this for you, please fill out our contact form (the link to which you can find in my profile in the "about me" section) and we'll see what's going on with your mother's account.
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you
Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply. -
New Version of BT Yahoo Classic Mail Major problem
I have tried to use the new version of BT Yahoo Mail & have encountered a major problem.
When I select any area of the new mail page I get a message that says "E Mail out of Memory Line 1"
My computer then locks up totally, & I have to turn of with the on/off switch & restart.
I have now gone back to using the original Classic mail, but, I find that if I select a e mail address from a web site this is automatically placed in the New Classic mail system, & again I get the message & lock up.
I have contacted India, & got nowhere! She said I had too many e mails stored on my system! I actually have 3726, so I think she is wrong
Help please
Should I just stick with the old version of the mail system?
Is there anybody in BT interested in the problem?
Will the original Classic mail continue for ever?
Solved!
Go to Solution.Johnoo wrote:
To all who are viewing this, I have just had a mail from BT saying that they were having a few Bugs with the new mail system.
I was advised to phone 0800 633 5335 Option 2, & they would action.
I did this & I have been transferred back to the old Classic Mail system
They then advised that I should wait at least one month before trying to reinstall the new system.
Thought it best to share this information
Huge thanks to you Johnoo, had been struggling for two days after upgrading from BT Yahoo Classic to new version, and had just reached the end of my tether so to speak!!!
Followed instructions above - although Option 2 refers to 'Dial Up'? - and requested transfer back to Classic. Contact centre operative seemed to understand perfectly
I confirmed ID and she held on while I accessed mail account, took about a minute from start to finish! Very happy
Get busy living
Maybe you are looking for
-
Ok this explanation my be longer than it needs to be.
OK My mom's PC died the other day....it had all her itunes music on it that she did sync with her ipod and ipad ( a whopping 375 songs) so she has the songs on her IOS devices. She inherited and old MacBook (mine) and in the porcess of trying to sync
-
Infoset Query - Filter Records
Dear Experts, Please help me in defining in-built filter (by field values) in an Infoset query. Regards Jogeswara Rao
-
Converting from a spot color to a color for a RGB document?
How can I take a spot color from the Pantone Swatches Library and convert it for use in a RGB document? Thanks.
-
Data visibility in JTable columns
I am unable to see the "full" cell data in a JTable. When I click on the cell, the cursor lets me move left and right inside the cell. And that's the only way to see the full data inside the cell. Is there some way to set the minimum width of a cell
-
Can more than one computer "supervise" an iPad at one time?
Can more than one computer "supervise" an iPad at one time?