PLEASE HELP! video card trouble

Hi,
I'm a noob to computers, so, I had a game called Knights of the Old republic that was very glitchy. I thought installing some kind of driver for my video card would work, so I found this http://osx86.co/f36/intel-gma-x3100-fix-10-5-6-t2527/ and installed it. Once installed, nothing changed for the good, but no videos would play. So, I booted using apple S and wrote (as the driver person told me to) "./RemoveGMA" . This made videos play, but now my GAMES didnt work. UGH. Now I do not know what to do and would appreciate help. Here is some information to help you.
An error code given from one of my games:
Video hardware acceleration is currently disabled due to safe mode operation or a driver error.
Please ensure you have a working OpenGL Hardware Renderer and try again.

Neither iTunes nor QuickTime can convert MPEG-1/2 files to MPEG-4 format with audio. MPEG-1/2 files are "muxed," or multiplexed. This means both the audio and video are on one track. iTunes (and QT) fail to see the audio, and only convert the video.
Check out either one of the following third party MPEG-4 video converters...
Videora iPod Converter
MPEG Streamclip

Similar Messages

  • Please Help - Video Playback Problems

    I have followed all the instructions provided by iTunes support in an attempt to fix problems with video playback. They did not help. I downloaded 4 video files that would have smooth audio sound but skip and freeze continually throughout the entire video.
    This problem 1st occurred right after I downloaded the latest version of iTunes and then a purchased video. One point of interest is that all of my old video files from earlier versions of iTunes still work fine as they always did.
    Could anyone please help me to resolve this issue?

    I have had the same problem. I even bought a new 256mn video card and it did nothing. I have done everything i-tunes website suggest and nothing has helped.

  • PLEASE HELP - VIDEO QUESTION

    hey
    a while ago my mate downloaded music videos to a cd for me and i put them on itunes and then converted them to fit the ipod as they wouldnt go on the ipod, but when i converted them the sound disappeared. anyone know what i can do? i watch the music videos but theres no sound, and on my ipod theres also no sound when i watch them.
    PLEASE HELP
    Dell   Windows XP  

    hiya!
    it sounds like you might be running into the following problem:
    iPod plays video but not audio of some exported files
    were the original files muxed?
    love, b

  • Please help with card deck problem

    the class is supposed to create a shuffled deck of 52 cards
    it first is supposed to make an ordered deck of cards and then pull cards out of it and into another deck at random. when a card has been pulled, it is supposed to be taken out of the ordered deck. I say supposed to because for some reason a test of the class gives a strange runtime error:
    Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 1 >= 1
    at java.util.Vector.elementAt(Vector.java:427)
    at Deck.<init>(Deck.java:17)
    at testDeck.main(testDeck.java:5)
    the following is the code:
    import java.util.*;
    public class Deck
      private Vector orderedDeck = new Vector(52);
      private Vector deck = new Vector(52);
      public Deck()
        //creates an ordered deck where rank and suit are the rank and suit of a Card variable
        for(int rank=0; rank<=12; rank++)
          for(int suit=0; rank<=3; rank++)
            this.orderedDeck.addElement(new Card(rank,suit));
        //supposed to shuffle the ordered deck into a final deck
        for(int i=0; i<53; i++)
          int randomNum = (int) (Math.random()*(this.orderedDeck.size()+1));
          this.deck.addElement(orderedDeck.elementAt(randomNum));
          this.orderedDeck.removeElementAt(randomNum);
    }please help me figure out my problem

         for(int i=0; i<53; i++)This should be:
         for(int i=0; i<52; i++)because you declared your array of size 52.
    -Eric

  • 655 Max FISR SATA & Video Card Troubles

    Hi all
    I put together my 655 Max FISR (non HT) based system 3 weeks ago and have had nothing but problems (this is the third PC I've built and it's the only one to have caused major problems).  Initially the memory and video card were problematic, stopping me from installing Windows XP, but having read some of the other threads the poor old 655 seems to have lots of problems with various components.
    My motherboard hated the Crucial Technology PC3200 512Mb memory (CT6464Z40B) I put in DIMM 1 and the MSI 5600U VTD-128 video card.  Anyway suffice to say I solved the problems easily enough.  I swapped the memory and the video card  over with that in my MSI 645e Max U (the video card was a Connect 3D Radeon 7500 for info).  The 645 runs beautifully with no problems whatsoever, unlike the 655!  
    I've now upgraded the Radeon 7500 to a Sapphire Radeon 9600XT which works really well. So if you are having problems with a card based on an nVidia chipset (which Win XP keeps saying has drivers that don't pass the compatability test) I'd try the ATI cards.
    My main problem now is with the two Western Digital SATA drives I've got setup in a RAID 0 array.
    Firstly I'm getting poor disk transfer rates (I used the SiSoftware Sandra utility to benchmark the file system, and got a really poor 23Mb/s).  As an example Windows XP loads up in 1 minute 8 seconds from power on, unlike the 645 with a 80Gb Maxtor DiamondMax 9 which does it in 45 seconds - I was getting Windows up in 32 seconds after initial installation of XP!!!  Now I know I've got PC2100 memory in this machine, but it seems to have got slower since I did a driver and Windows XP update (hope this isn't anything to do with the I've downloaded).
    The second problem is a bit more serious, one of my Raptor drives keeps dropping off line when I run either the error checking or defragmentation tools in Windows.  The computer shuts down and re-boots only to tell me there's been a problem (a drive has failed or disconnected) before asking for a boot floppy. Fortunately, if I delete then redefine the array I get the system up and running again, but it is annoying!  Problem is, with the 655's reputation, I don't know whether I have a motherboard, cable or drive problem.  A limited trouble shoot by swapping over the drives has ascertained which one the system alleges to keep failing, but I'm now stuck, short of trying new cables, or buying a SATA RAID controller and sticking it in the 645 to see if it is one of the drives that's at fault.    
    So any ideas on the drive situation?
    Best regards

    Apologies for being away for a while, been busy with work & sorting out a pair of bad Raptors drives!  Thanks for the replies from Hellwolf_36 and simps.
    I can now report that after I'd worked out that I'd got not one but two damaged 74Gb WD Raptor drive (one had a lot of bad sectors and the other would take over two hours instead of 20 minutes to format which is why I was getting that stop message) and I had replaced the memory with one stick of the Kingston KV400X64C25/512 DDR, my 655 is now working quite well.  I haven't got round to checking if I've got the latest C-media driver installed though.
    One thing I did do though was set up my Raptor drives as two independant arrays (C: & D:) rather than RAIDing them.  This is because, I didn't want to stripe the drives just in case of another failure, plus I have more flexibility over storage space not mirroring the drives, unti lI can afford to by another hard drive or two.  Anyway they're really fast in the first place.  
    For this motherboard I wouldn't bother with any other type of memory other than the KV400X64C25 as recommended on the MSI website, as it's quite fast and no hassle, (can't wait to get my second 512Mb so I can go back to dual channel!!)  Only problem is that the price has gone up a little bit over the past couple of months.
    So apart from this MoBo being particular about graphics cards and memory it's not too bad.  My next challenges are too sort out the center/sub problem and network  this baby.

  • Please help music card problems

    i bought a 20 dollar music card to use to download songs from itunes music store but it says i cant because i have a usa music store, and an australian music card. how can i change my music store usa to music store australia??
    please help.

    Nevermind. I found my answer.
    http://discussions.info.apple.com/thread.jspa?messageID=11840933
    I have the same issue here. Thank you Bob Timmons.

  • Please help memory card problem

    plase can any1 tell me how to take a pasword of a memory card it seems to have put a password on and i dont know it and have no idea how to get it of please help i cannot access the card

    Unfortunately there is not an easy way to find out memory card password. Have you tried to format your card?

  • PLEASE HELP i have trouble with WRT54G port forwarding with linksys

    Hello guys, i play a game called populous, and since im on a router i cannot host the game, when i used to have a d-link all i would do is have to set up the port to my ip with the udp. but ever since i have swiched to linksys that doesnt work, the ip on my portforwaring is the same as the one on my computer the port is correct and the udp is set, i also have no fire walls on and it still doesnt make a differance, Someone in the game suggested that there is a local ip i need to get? is that true or is there another setting i need to set up in my router page?
    PLEASE HELP IF YOU CAN <3<3 thanks
    Message Edited by Curtman on 09-07-2007 12:04 PM

    Yes that happens if you write replies to your own posts. Many regulars here only answer their "own" topics (i.e. to which they have answered before) and new ones which don't have replies, yet. If you write a reply to your own topic chances are your are not read unless during some random browsing...
    Regarding your problem it is impossible to say anything unless you give the exact settings you have on your router. Please post the full settings you have for port forwardings, port triggering and DMZ. If you have UPnP forwarding in your router (I don't think you have) post those settings, too.
    Otherwise I suggest this checklist for troubleshooting port forwardings.

  • Please HELP! Itunes trouble! I NEED of assistance.

    Ok, well long story short, my Itunes does NOT open.
    This has been going on for a few months but I just pushed it aside until today because I got an Iphone today.
    This is what pops up when I click the itunes icon:
    http://i46.photobucket.com/albums/f111/batboy99/untitled.jpg
    The error code(-50) is listed on the actual apple site as a problem that usually occurs, but it isnt the same problem as I have. Usually this error pops up when downloading purchased content on Itunes, but my problem is that Itunes wont even open up! I havent put music on my ipod for months. I've tried uninstalling and redownloading it a dozen times and I've even tried to ''repair'' it, but nothing helps.
    Please help me. I'm basically an idiot when it comes to computers and I really need your guys expertiese(sp?)
    so please make it as easy for me to understand as possible.
    Thanks so much guys!

    The error -50 when launching iTunes nowadays usually means there's a problem afoot with your Apple Application Support. So we'll try uninstalling both your iTunes and Apple Application Support, and then reinstalling iTunes (which should also reinstall Apple Application Support). We'll take a few other explicit precautions along the way, just in case. Best to print out a copy of these instructions, because at one stage of proceedings you won't be able to use a web browser.
    Preliminaries
    Download and save a copy of the iTunesSetup.exe (installer) file to your PC. (Don't run the install on line, and don't start the install just yet.)
    http://www.apple.com/itunes/download/
    Quit QuickTime and/or Safari if you have them open. Both applications use Apple Application Support, and they will interfere with the uninstall if you have them open (if you can open them at the moment).
    *Uninstall phase*
    Head into your "Add or Remove Programs" control panel. Uninstall iTunes. Uninstall Apple Application Support (if it is listed in there).
    (From this point on until we reinstall Apple Application Support, neither QuickTime nor Safari 4.0.4 will be able to run.)
    Next we'll remove any leftover program files and folders.
    (1) Open "Local Disk (C:)" or whichever drive your program files are stored on.
    (2) Open the "Program Files" folder.
    (3) Right-click on the iTunes folder (if it still exists) and select "Delete".
    (4) Open the "Common files" folder.
    (5) Open the "Apple" folder.
    (6) Right-click on the Apple Application Support folder (if it still exists) and select "Delete".
    Now empty your Recycle Bin and restart the PC.
    *Reinstall Phase*
    After the PC restarts, do not open any other applications. Disconnect from your network and/or the internet. Switch off all your security software (firewall, antivirus and antispyware).
    Now start the install by doubleclicking the iTunesSetup.exe file you downloaded earlier.
    Reenable all security software prior to reconnecting to your network and/or the internet.
    Did the install seem to go through okay? If so, does iTunes start launching properly again?

  • Video card troubles 8(

    I just recently bought a Levono H215 computer.
    I do some light gaming and the computer seemed like a decent buy. After about a week I decided I needed a better video card then the integrated card had to offer. A friend of mine had an extra Geforce 9800 GT that he wasn't using so he gave it to me.
    I installed the card and upon booting up the system all I got was  ablack screen on my monitor. I pressed the monitor button and got the message "No Signal". After trying several different things to solve the issue, a friend suggested I get a new power supply. The power supply the system came with was max power of 280 watts.
    I ordered a new 500 watt power supply thinking that maybe the Geforce card was not getting enough power. My new power supply arrived today, and it installed o problem.
    I once again put the Geforce card in booted up the computer and got the same results..solid black screen. Pushing the power button results in "NO Signal" message.
    The monitor hooks in to the video card with a vga cable..but the vid card has only a dvi and hdmi slot to plug it in. So I am using a VGA-DVI adapter to hook it in.
    I am at my wits end..does anyone know how I can get this working?

    Check the bios. The settings may be on onboard only. I have also seen some GPU's not load until Windows is loading. So use the onboard GPU to check the BIOS settings.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • Video Card Trouble

    Hello, first, sorry for my english, i'm from brazil!
    I bougth a Macbook pro Retina 13' (Intel HD  last year. Some months after that, every time that a left my mac for some hours on stand by and l'll use it later, when i open, before the display turn on the display appears like "sprinkles", like a TV with no signal, during 1 - 3 seconds. After that display get normal again.
    I called on support and they told me that probably was my video card and 3 other people called about the same problem.
    I use my macbook to work, and it's vey bad for me take it to assistance.
    Somebody have seen it???
    Thank you

    You can unplug a monitor and plug another one in while the computer is running done it many times. Hardware is tricky to deal with? My favorite monitor one day half the screen went black. Put it on the floor to get rid of, for some reason hitched it back up, a week later, and has now been working for months.
    Ram? Have not had it work under any configuration or slots, only to put it in a identcal computer and have it work fine.
    One little hiccup on code , or electrical circuit, and these computers have a problem. Work with some hardware and pick up a second computer for parts.

  • Please help, video lag

    'm on a mac running leopard. The following TRULY baffles me.
    So im a sound designer and i have an external sound card i
    use for my work. When i watch flash videos with my built in sound
    card (like youtube videos) everything is fine....
    ... but when i use my external soundcard the video content
    stops and starts; it jitters all over the place. The audio however
    is fine!
    Now is this a hardware issue? i have all latest drivers and
    firmware... or is it a setting in flash player i'm missing?
    Major help needed, please aid me.
    Thank you.

    Try installing the following in Firefox:
    Those will effectively kill a lot of stuff that tries to run with videos. They used to spike my CPU on a Win 7 e-machine (plugin-container.exe) until I blocked everything.

  • PLEASE help: video on new iPod Classic 160gb

    Hi all,
    I would be really grateful if someone could help me. I was lucky enough to receive a shiny black 160gb iPod Classic for Xmas to replace my old 3rd Gen one.
    However I'm having a bit of trouble with videos. I have downloaded some video podcasts via iTunes store that have synced to my pod and play fine. However I have just downloaded some TV shows from the internet - they play in iTunes and are listed in my iPod under"My Devices" but I just can't find them on the pod.
    Any ideas????

    Hiya and thanks for your respose!!
    I downloaded them from a torrent site but they did say they were specifically formatted for iPod use - the file format is MPEG4.
    However, I've also tried downloading a video podcast from directly from iTunes (again in MPEG4 format) that hasn't synced to my pod either.
    It seems the only video I've managed to sync is a podcast I downloaded about a year ago and two music videos I had from importing CD's.
    Any further help would be greatly appreciated.
    Thanks!

  • Please help!  Having trouble with downloads!

    Whenever I try to download windows programs, microsoft excel tries to open the program... I'm trying to download Media Player, but after the download is complete and I click open, Excel tries to open it (which obviously doesn't work). How can I fix this problem?

    Do you have Windows installed or are you trying to download and install Windows Apps thru OS X?
    If it's the latter,it won't work.
    Please be more specific with your problem and we may be able to help you further.
    Jim
    PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM   Mac OS X (10.4.8)  

  • Please help, Pages layout trouble

    So I'm doing a newsletter...and I'm about ready to take my computer and pages with it and smash it with a sledgehammer. For some odd reason I cannot get text boxes that I insert to move. They will move on their own and will only have the resize box and It's very infuriating. Secondly, when I print it out, it's not on the full page. It literally doesn't fit an 8 1/2 x 11 page. Why is that???? Lastly, when I try to make the background box (I'm using a layout) to conform to the rest of the page, I get an x and it won't move. Can someone help me please? Because I swear I'm about to go and do this on a PC.

    I understand your frustration. We've all been there. But I think both of these problems have easy fixes.
    When an inserted object can't be moved, the cause is almost always that it is set to "move with text." This happens when the cursor is active in the text layer when the object is inserted. To avoid this, click outside the layout area to enter the object layer then insert the object. For those objects already inserted, click on an object (you should see faint handles), then go to the wrap inspector (the third icon) & click the button next to "fixed on page." You may want to change the "extra space" to less than the default 12 points. Objects you want in the background have to start out as fixed on page.
    For the shrunken printed page, my guess is that you have comments turned on. Go to the View menu & select Hide Comments.

Maybe you are looking for