Please read this prior to posting in this area.

Hi everyone,
The "Forum Feedback and Suggestions" area is for posting ideas, questions, comments, concerns about the actual forum experience. If you are looking for help with a product issue, please locate that area of the forum and post your question there.
We love to hear your questions and concerns, but want to help you in the best possible way by showing you the best place to post to get help.
Thanks,
GarenT
HP Site Admin
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

Hi! I've seen a lot of criticism because problems are not solved. I just want to tell you, that you are doing the best you can. NO ONE CAN KNOW EVERYONE ELSE'S COMPUTER! You guys sure take alot of abuse and I am sorry some people do this.
I have been with HP for years; and though every problem is not solved tha does not mean you aren't trying.
I APPRECIATE EVERYONE ONE OF THE HP STAFF AND TECHNICIANS; because I know what they have done for me. It's hard to take some of the comments people say, but don't take it personally. We all get frustrated sometimes, and I don't know how yall all keep your cool when someone really comes down on you,
HANG IN THERE! WE DO APPRECIATE YOU!

Similar Messages

Please respond to my previous posting and this is an additional part too

I am wondering if anyone has seen my previous posting from a few days ago, within this same discussion area? If not, I'd really appreciate a response. Also, I am wondering if this might help solve the mystery in any way: I have downloaded iphoto 5 but it says at the end of the process that I am missing a critical file for it to be able to open. Then I downloaded 4 again, and I got the same message. What's happening to my iphoto??
Thanks,
Becca

There may be a problem with the file. Did you use Software Update to do the download?
Try the installer from this link:
http://www.apple.com/downloads/macosx/apple/iphoto504update.html

Frequently Asked Questions (FAQ) BEFORE you post, PLEASE read this first

PLEASE READ ALL OF THIS POST BEFORE POSTING ON THE FORUM FOR THE FIRST TIME!
Welcome to the Creative Labs MP3 Players web forum!
This forum is for discussing issues related to the MP3 players (digital audio players) made by Creative Labs for those in the Americas, Europe and Asia Pacific . Although we're not going to turn away folks from other areas
The primary language of the forum is English, and posting in English is likely to get you a quicker response.
If your question does not relate to Creative MP3 players please find another more suitable forum to post in. If you want to discuss another player, or something not covered by another forum, please use the Off Topic forum.
CONTENTS
How to contact support
Hot topics
General issues
Before you ask your question
When you ask your question
After you ask your question
Low volume issue
Nomad Primer
Nomadness.net FAQs
More useful links
Wishlist and petitions
Suggesting changes
. How to Contact Support
Please note this is a peer forum and Creative's Support staff do not guarantee a reply here. If your issue is urgent, you are within your warranty period and/or you do not get a fast reply here you should contact Creative Labs Technical Support.
To contact support click the Support > Contact Customer Support link on this page.
When contacting Creative Support by email it's important to note that you must reply to the autoresponse email you first receive, as detailed in the email itself. Also make sure to check any spam trap you have on your email system if you have not received a reply.
It's also important if you feel that you have a bug or defect with your product to register that issue directly with support. Don't rely on the forum to raise awareness of an issue.
2. Hot Topics
This is dividied into 3 sections: General, Tag based players & USB mass storage players.
Make sure to also look at Section 3, which covers some of the other General Issues.
General
Where do I get the latest software, drivers and firmware?
Click the link Support > Downloads on this page.
In general, when installing on a new PC you need to download the driver, and some software to communicate with the player e.g. MediaSource, Media Explorer. For players using the v2.xx MTP/PlayForsure firmware drivers are not necessary, but you must have Windows XP and Windows Media Player 0 (this provides the MTP driver).
Important: Even though files are described as updates, none of the software requires a previous version to install. At worst they will prompt you to connect your player to verify you own a Creative product.
Note if you are downloading MediaSource make sure to download and install the relevant MediaSource plugin for your player. If MediaSource can't detect your player this is the first thing to check. For the v.xx PDE firmware the plugin is called the Creative Zen and NOMAD Jukebox plugin for Creative MediaSource , and for the v2 MTP/PlayForSure firmware it's called Creative MediaSource Plugin for PlaysForSure devices .
I am completely new to MP3 players, where should I start?
Have a read of my Nomad Primer, so called as Creative's MP3 player range tend to be prefixed with the word Nomad.
I think I have a bug, how can I check?
There's a known bug list hosted at my site here. If you want to add a bug then please
I have a wish request for the player, what can I do?
You can post it here (see the petitions listed in Section of this FAQ), email it to support, and/or add it to the public wishlist I host here by
I'm having connection problems with my player
If you can, the best test is to try your player with another PC, to see if you still have the problem. This localises whether the problem is with the PC (most likely the USB) or the player. See the link below (search on "connection problems") for a lot more troubleshooting on this.
What bit-rate should I encode my music at?
Ultimately it's down to your ears what bit-rate you prefer, and you should listen for yourself to determine it. If you ask on the forum you'll get many different opinions.
Make sure to look at the "MP3 vs. WMA" link below also.
How long should my battery last?
For the Zen and Nomad Jukebox players, to get some idea of how long your battery will last for a given bit-rate look at the battery curves thread. Ultimately battery life is dependent on how you use the player, make sure to follow the "why doesn't my battery last as long as expected?" link below.
How long does an RMA take?
Typically 2 weeks. But it might take a little longer, so don't start posting if it's 5 days.
I want to know how people feel about their Zen Micro/Touch/MuVo etc.
There's a long post titled Experience with your Creative player that has many posts from users about their players. Please search back for threads about specific players before starting a new thread.
Where can I buy online music or get legal downloads for my player?
See this thread.
My tracks don't play at the correct speed e.g. they play too slowly, why?
Chances are they are encoded in an unsupported sampling frequency. The tracks will need to be re-encoded at a supported bit-rate and/or frequency with something like Creative's MediaSource Audio Converter or dbPowerAmp.
Can a Creative player work on an Apple Mac?
It isn't officially supported, but some kind folks out there have written freeware applications to get your Creative player working with Macs. XNJB provides support for the Zen players, and requires OS X 0.3 or 0.4 (check the site for full details). MuVoHelper solves some problems with getting the MuVo to work optimally. The iTunes Zen plugin should support all Zen players. Note if the link to the plugin is broken just Google "iTunes Zen plugin" to find other sources. Also note there's no guarantee that these programs will work with the Mac, so if you have issues you should address your problems to the developer(s) of the relevant program.
Can a Creative player work on Linux?
Again it isn't officially supported, but again some kinds folks out there have written freeware applications to get your Creative player working. There's the Gnomad2 project. And don't forget the Linux forum at Nomadness.net if you are still having problems.
Tag Based Players
This section covers the players that use a hard disk and work using tags e.g. Zen Xtra, Touch, Micro, Sleek.
My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?
If the Zen is not starting properly or not behaving correctly, first try to reset it. To reset all players except for the Zen Micro there is a small switch on the side of the player typically, that you should press using something like a bent paper clip. Don't use anything sharp. To reset the Zen Micro simply remove the battery and replace it.
If this doesn't work then access rescue mode, and try running a disk cleanup.
Next you should try reloading the firmware/OS, but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded.
The last resort is to format the player. This will erase the contents from the player, including the content that ships with the player.
If none of these resolve the problem and you are under warranty you should get in contact with support to arrange replacement of the player.
If you aren't under warranty Creative will still repair the player, which you can arrange by contacting support.
How do I do a Disk Cleanup and/or access Rescue/Recovery Mode?
Refer to the sticky Rescue Mode thread. Disk Cleanup is accessed from this. Note that the MuVo players (with the exclusion of the MuVo? players) do not have Rescue Mode.
How long should a Disk Cleanup take?
It should only take a few minutes, and no longer than 30 minutes. Anything longer than this and there is a problem with the player and you need to contact Creative Support.
How long should a format take?
Only a few seconds. Anything more than a minute and there is a problem with the player and you need to contact Creative Support.
Although I can get into Rescue Mode, I can't select any option, or the options don't work?
If Rescue Mode is not working properly or commands can't be chosen the player is faulty. You need to contact Creative Support.
When are the Zen 20Gb/Neeon going to be released outside of the Asia Pacific region?
Due to popular request the Neeon is launched in the USA, but nowhere else for now. If you want the Neeon then contact your regions Customer Services to request it.
The Zen 20Gb is available from some shops in the USA and Europe e.g. Cambridge Soundworks, and Amazon.co.uk.
Is there a known issue with the Zen Micro headphone socket?
Creative Support have neither confirmed nor denied it officially. Some users have posted purported emails from Creative on the forum saying that the socket has been reinforced, but these have not been confirmed by Creative Support either. The exact incidence of the problem is unknown, but newer players seem to suffer less from it.
Should I buy the Zen Micro or Touch etc. and what colour should it be?
We can't tell you what player to get, or what colour it should be. Look at your collection size and the features of the player (see Nomadworld.com for the product pages) and decide yourself based on this.
Why does my Zen Micro battery drain so quickly?
The standby time (24 hours from turn-off) for the Zen Micro seems to use a lot more power than previous Zens. Creative have released both v (..0+) and v2 (2.20.05+) firmware that reduces the standby time to 4 hours. Make sure to update to one of these if you have a draining problem.
Also see JazzMC's detailed page on this problem.
Why is my Zen Micro/Touch Touchpad so sensiti've and/or difficult to use?
The Touchpads take some time to get used to.
continued below... Message Edited by SSR on 2-29-2005 04:03 PM

7. Low Volume issue
See here in the Zen FAQ at Nomadness.net.
If the firmware will not apply because it says the version number is the same use the Reload OS option, access to which is described in the relevant FAQ for your player below.
8. Nomad Primer
If you have ordered, or just bought a Nomad Jukebox, Zen, or MuVo?, consider reading the Nomad Primer.
It may be worth reading even for the more experienced User.
9. Nomadness.net FAQ's
General FAQ
Jukebox FAQ
Jukebox 2 FAQ
Jukebox 3 FAQ
Jukebox Zen FAQ
MuVo FAQ
Nomadness.net is the foremost peer site on the Web for the Nomad players on the Internet; with news, articles, web forum, download archi've, and more!
0. Some more useful links
Nomadworld.com - Creative Labs's International Nomad website (based in the USA)
Player Manuals - Downloads of digital manuals
Notmad Explorer - 3rd party software
Battery Uni'versity - very good, comprehensi've site on batteries
Chinese Support thread - with information on how to get chinese characters on your player
. Wishlists and petitions
Here are links to a number of general wishlist and petitions, so rather than starting your own you can add to those that already exist, or of course add your support for a feature you would like to see.
Also remember that the only collecti've public wishlist is maintained here at StainlessSteelRat.net (this is not affiliated with Creative Labs, but maintained by the author of this FAQ). There is also a bugs list here. So please
Wishlists
Zen Micro
Zen Micro (another)
MuVo Sports C00
MuVo N200
Petitions
AAC support
Lossless codec support
MP3 Pro support
Ogg Vorbis support
Audible support
Genre definable EQ
Gapless playback
Games support
Insert to queue
No "the" in Music Library
Open source firmware
Play count and ratings
TXT viewer
USB mass storage / dri've letter support
Track number duplicate checkAlbum art
Substring search
Dual firmware for both tag and dri've letter support
Rename "Reload OS" to "Erase OS"
Zen Micro alarm enhancements
Zen Micro always visible clockZen Micro Audible support
Zen Micro customisable standby time
Zen Micro EAX
Zen Micro radio enhancements
Zen Touch non-PlayForSure firmware with bug fixes
Zen Touch bookmarks
Zen Touch EAX support
Zen Touch random button changeZen Touch Audible support
2. Suggesting changes
To suggest changes to this FAQ please
Thanks for reading!

Purpose of this Forum (Server General) *** Please Read Before Posting ***

Welcome to Windows Server General Forum !
This is an English TechNet forum, Please post your queries in English !
Scope:
The name "General" has a very broad significance and sometimes that might lead to some ambiguities.
The scope of this forum is to answer General "Server Administration" related queries pertaining
to Windows Server 2003, Windows Server 2008 / R2 and 2012 operating systems.
Again, "Server Administration" has innumerous aspects and at times it becomes bit difficult to categorize
them.
We try to answer your questions in General or provide troubleshooting support in depth as and when necessary
based on the context of the query.
Questions could be related to AD, GP, Server OS related Queries/issues/errors, general troubleshooting etc…
list is too huge and it's highly difficult to elaborate them here :-)
We understand that this scope and purpose can be a little confusing, we apologize for any confusion.
If you might not know the scope or purpose of this forum, we'll redirect you to read this thread if we need
to explain how this forum works.
Out of Scope:
Queries on following (but not limited to…) are Out of scope in this forum.
Scripting
SBS
- Small Business Server
IIS
Coding/Development:
Windows Client Operating Systems
Exchange
Server
Lync
TFS
SQL
server
Visual
Studio
.Net
SharePoint:
SCCM, SCOM
Third Party Applications
etc…
We might (but do not claim to) answer some of the out of scope questions directly here. If we do,
then it's just a Bonus ! and it's not the purpose or in the scope of what this forum provides.
Moving Threads:
It may happen that, your question might have been moved to this forum in an attempt by another moderator from
a different forum to help you find the correct forum or we might move your threads to an appropriate forum as and when necessary.
If a community member gave you the URL/link of a specific Technet forum, then you may request a move to that
specified forum (If a link to the forum category is specified; you'll still need to pick a specific forum from that category) or thread will be moved to the appropriate forum if a Moderator is around.
NOTE:
We cannot move a thread to another Microsoft forum that's not in the TechNet Forum System such as ASP.net,
IIS.net and Answers.Microsoft.com etc… So we can only provide links to those forums.
Marking Answers:
We propose a reply (such as a link about where to go ask your question) to a recent question as an answer,
and then we will usually wait one week (~7 days) before we mark it as the answer. We prefer you (the Asker/OP - Original Poster) to mark the answer, but we do not require it if you abandon the thread for a long time.
If you (the Asker/OP - Original Poster) refuse to let us propose and mark an answer (without telling us why
and helping us figure out the alternatives/workarounds), then we might need to lock a thread or move it to the Off Topic forum.
Please Read Before Posting:
How
to ask a question efficiently in TechNet forum
We have dedicated Server
Forums for different products/technologies, please consider posting your queries in appropriate forum for better help and support.
If you can't figure out where exactly to post your questions, please seek help in "Where
is the Forum For...?" forum and you will be given a URL/Link to an appropriate forum where you can post your questions.
Official
Microsoft Forum Sites
Credits:
Ed
Price - MSFT (Forum Owner)
This sticky has been created inspired by the Sticky on Where is the Forum for.. forum.
Regards, Santosh
MVP - Directory Services
I do not represent the organisation I work for, all the opinions expressed
here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Blog | Wiki
If you have issues with your account verification or you can not post images, please get your account verified
by posting request in below linked thread.
Verify Your Account 7

Something new (or not noticed by me before) then as this thread appears as normal discussion in
My Thread view.
Regards, Dave Patrick ....
New UI has this functionality i.e. if you reply on a sticky, it will appears as a 'Discussion' in thread view.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS.

BEFORE posting, please read this!!

Before posting in this forum, I urge you to read though GlennVidia's sticky post Suggestions on posting and getting better answers and also hpkuo's A collection of tips and tricks
also to new users, please create a signature in the User Control Panel listing your system specifications.
too many people are posting questions like "MSIPVS don't work, please help" but if you don't tell us what your system is, its like asking your GP to diagnose medical problems over the phone - ie, guesswork!! also it helps if you give us your location, ie Seattle, USA; Norwich, UK; Kabul, Afghanistan; for local TV issues.
any users with the MS8606 TV@nywhere Master should first try the Unofficial BETA drivers for this product listed in my sticky at the top of this forum, looking through the release notes for this, it fixes many problems that users have posted about.
plus make sure all your system and vga drivers are up-to-date, here are some links:
For Nvidia Nforce chipset and display drivers:
http://www.nvidia.com/content/drivers/drivers.asp
For ATI chipset and display drivers:
http://www.ati.com/support/driver.html
For Via chipset and display drivers:
http://www.viaarena.com/default.aspx?PageID=2
For SiS chipset and display drivers:
http://download.sis.com/
For Intel chipset and display drivers:
http://downloadfinder.intel.com/scripts-df/support_intel.asp?iid=HPAGE+header_support_download
Installation of MSIPVS:
Download and install the latest drivers for your MSI TV Tuner (either from MSI or the BETA drivers if you are using TV@nywhere Master). After installing the drivers, please RESTART your PC (the installer won't prompt you to do this) BEFORE you install the MSIPVS or MediaCentre III software.
MSIPVS (or other InterVideo software) won't work if Windows has been installed to a partition other than C:, Mega PC users should disable the card reader by either unplugging it from the motherboard, or temporarily disabling the USB controller in BIOS before installing Windows to ensure it sees drive C: as default installation drive.
This should avoid any "antenna & afghanistan" default configurations in MSIPVS, but please ensure your correct region and TV standard settings are selected, and the correct cable / antenna connection is selected.
Mega PC series
Users using a Mega series barebone PC with MediaCentre III (ugh) should also search through the Mega PC series forum for further assistance there.
Hope this helps

sorry, think i must have slipped on something

"Please Read This Before Posting Here" font large enough?

To whom it may concern,
Perhaps if you can't change anything else maybe changing the size of that font might help.
Really, (and clearly) something needs to be changed about the way Discussions is organized. I see nothing but excuses about topics being mistakenly posted in the wrong forums.
I hope that something "is" being done to correct this issue in Discussion forums. Personally, I feel that far too many new users are posting in the wrong forums. The quantity of how many is way beyond what should be seen in my opinion. This has to show some proof that the way the Discussions is setup is just not working properly and corrections need to be made. And not just here in the Feedback About Discussions forum but across the board.
One can understand perhaps an erroneous topic being posted in, for example, 10.3 and earlier whereas it should be posted in the 10.4 Tiger forum where no huge banner states posting procedure but when one sees the amount of off topics in this forum it is just a joke now. Obviously, these users are not posting here intentionally knowing it is the wrong forum. For what ever reason they have wound up here and don't realize that it is incorrect. I believe it "is" the responsibility of the forums to make sure these posts are posted correctly and not by just moving them but to change the way the discussions are setup/operate so that it doesn't happen to begin with.
Please do something,
littleshoulders
Message was edited by: littleshoulders

J.K. ROFLing,
What do you suggest littleshoulders?
I have made suggestions, whereas others have not but have also asked for changes here in regards to posting topic probems.
A suggestion I have made was to force the user whichever way they enter discussions to fill in a form that directs the user to the most appropriate forum. This doesn't need to be a long form but I'm sure you have seen this type of form on other sites that narrow a search down.
I'm certainly not an expert (I assume Apple has enough on staff to handle the logistics) and would only venture a guess as to what might be asked on the form to narrow the search.
Most importantly, I can't believe that the form would be any more labor intensive on the user than navigating through the Discussion pages to get to an appropriate forum. And quite frankly, even if it were it would certainly direct the user to an appropriate forum saving huge amounts of wasted time trying to get their support.
"Computer: iMac G3
OS version: OS X v10.3.9
What is you computer problem or support topic: Terminal problem"
I'm sure there would have to be other menu options (pop-ups and user filled info) for this type of search process but that is an abbreviated example for this excercise.
These directing forms are used all over the internet to direct the user to the appropriate product, support or otherwise.
I contend that the way that Discussions is presented currently that it needs this type of user interface to work properly.
In closure, I have to say that I don't believe in status quo and think that any change for the better is welcome and I bet all those novice users who struggle with posting topics correctly would agree. They obviously need more help than what is currently offered with posting.
regards,
littleshoulders

Ipod not connecting again, apple please read this.

First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.

Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really).

Please Read this ! USB Sound Blaster 24-Bit External : The Story of the endless problem

In order to keep the good behavior here (I`m really pissed off !) I just?want to tell you something (this is ESPECIALLY for all the guys from the stuff)?Before 2 days I`ve decided to buy a new sound system for my room. I bought myself Creative Inspire t600 5. surround system. Cool. I was very happy. I?needed only to buy a sound card?working with 5. because I have a notebook DELL INSPIRON 50 who has only 2 canals. So in order to be everything beautiful I gave $70 for Usb sound blaster 24-Bit external. And from that time the problems began. In short :? I was using Vista but I found out that it wont work with this soundcard. The first problem : Didn`t identify the device. I tried with several drivers... Nope. No sound card with Vista.(This problem seems to appearance with many owners like me)?I pluged the usb soundcard in my old pc running XP and it worked . PERFECTLY. So I removed Vista from my notebook and intalled XP. This took me whole day to rebuild all my software. Finally it left to set up the sound drivers. The cherry of the icecream. Aaaaand ..... **bleep**. When I play?any track it CRACKLES. Again problem appearanced with many here. I tried to find out here what is the problem but unfortunately as u can see my english is quite bad?so I cant understand?what I need.I really like Creative but if they cant manage this problem I will?no longer buy their stuffs??JUST PLEASE SOMEBODY ANSWER ME IS THERE ANY SOLUTION FOR THIS OR NOT. I JUST WANT STRAIGHT ANSWERPS : Please do not delete my post. I know there are plenty like this. I dont want this crackles

well ?

MSI TV Tuners - Please Read This Topic First!

Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codec

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Centro wired headsets wont work i have read the other posts on this

I've been reading posts on this topic. will try to find some wd40 or a paperclip when I get out of this airport!
but I dont know if this is my problem. because when my headset is plugged in you hear no sound coming from the
"earpiece" but the minute I unplug the headset you can hear fine with the phone.
if it was the "switch" and wd 40 would work, wouldnt I hear the call thru the phone if the headset was not registering?
it almost seems like it thinks bluetooth is on. I had to stop using bluetooth it kept resetting itself and not connecting.
so it is now t urned OFF. I have bought millions of headsets. I can call palm but have not had time and dont trust them.
thanks so much!
Post relates to: Centro (Sprint)

As with most problems that occur on a Palm PDA, it is either software or hardware related and we have to determine which one.
Best method is to first make a complete backup of your unit to your SD card using the free "NVBackup" (available from http://www.freewarepalm.com) After the backup is complete, Hard Reset the unit, then test to see if full functionality returns.
How to Hard Reset a Palm Centro.
Go to http://kb.palm.com and enter the number 45050 into the "Solution ID" box.
DO NOT HOTSYNC YET! Test the unit before reinstalling any software. If the unit works correctly, your problem is being caused by a "drug interaction" of software - maybe one rogue program, or a combination of several. You'll have to reinstall the third-party programs one or a few at a time to find the problem one. To avoid re-installing a software issue, rename your /Backup directory in your Palm folder (on a PC it's found here: C/Program Files/Palm(One)/"your HotSync ID name truncated"/Backup) to something like "/BackupOLD". Now perform the HotSync, choose your HotSync name you've been using, and all your PIM data will return, but not the third-party programs. Test for functionality again. If all is good, start installing the old programs from your /BackupOLD directory one (or a few if brave) at a time.
If the unit does not work after a Hard Reset is performed correctly, then it may be Hardware-related. (If it's a connection problem via either BlueTooth or Wifi, be sure nothing has changed on the unit you're trying to connect to!)
Hope this has helped,
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

This application is not yet configured. Please refer to the E2E post-instal

Hi,
I have configured the SMD on Solution Manager 4.0 SP 11, LMSERVICE SP12 (Before it was SP 11 but is still had the same error)
Wily Introscope 7.1.
The solution has been published and I able to use all the other diagnostic modules except for E2E.
When I click on any E2E Workload/Exception etc I get the following message
"This application is not yet configured. Please refer to the E2E post-installation steps"
What are the specific steps to enable my application for E2E?
Thanks,
Vikram

Hi Bernd
Thanks for the detailed steps. My comments interspersed
> Hi Vikram,
>
> 2 steps have to be performed:
>
> 1) Scheduler Configuration
> 1.     Connect to the Diagnostics system.
> 2.     Start the Scheduler application
> o     Diagnostics Administration  Managed Systems
>  Scheduler
> 3.     Select the E2E Log Analysis Task. This task
> analyses log and dumps files to collect Error and
> Dump messages from the associated managed system.
> 4.     Activate the Task for the host belonging to the
> managed landscapes
> N.B.: Please be aware that this task will fail as
> long as the configuration step Setup RFC
> Destinations has not been successfully performed.
> Navigation Activation
This step has been completed, and there are no errors. I don't think I need an RFC since my managed system is a J2ee stack Netweaver ( 2004s SP12 ). This is the message that I see in the E2E Log Analysis scheduler "Execution succeeded in 3188 ms. Next execution in 60 min(s)."
>
> 2)
> 1.     Start Visual admin
> 2.     Go to Server -> Services -> Configuration
> Adapter.
> 3.     In the Display Configuration tab drill in:
> apps -> sap.com -> tcwebadminstratornavigation~ejb
> -> appcfg
> 4.     Enter the edit mode and set the custom value to
> true for the three properties named:
> o     e2e_*_configured ( where * is the name of the E2E
> application you want to enable)
> 5.     Restart the navigation and the corresponding E2E
> applications can now be started.
I have set the custom values to true for the following:
e2e_log_analysis_configured
e2e_trace_configured
e2e_ workload_analysis_configured
In the Propertysheet.application.global.properties, restarted the apps
But I still get the same error.
Is there any other configuration involved?
BTW, Is there any document that details the above steps you have pointed out? I guess I must have gone through all the diagnostics set up guide, but have not come across this uptill now
Once again Thanks a lot!
Vikram

HT201471 why my ipad mini is keep restarting? please read this quick help!!!

my ipad mini wifi keeps restarting when i touch the screen or i play some games on it. it will fade to black suddenly, and then it will show the apple logo then and it will turn on then if will use it again it will does the same again.... I reboot it, reset to factory settings, and erase all the data,app,pic,music on it. but it keeps on happening. I'm frustrated. on my ipad mini why does this happend?? does this have an problem?? or virus? anything???
thanks apple please help me >.< I'm a Filipino so i'am difficult to speak in english please.

i think i will bring this to apple store and fix this to the technicians >.< thanks by the way
it keeps restarting >.< even if i will unlock the home screen...

SSRS 2008 R2 - on Preview report in report builder itself, getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". Any Suggestions please to resolve it?

Hi,
I am working on SSRS 2008 R2. On Preview report in report builder itself, i am getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
See my below screen shoot.
Any Suggestions please to resolve it?
thank you in advance !
best regards,
Venkat,
[email protected]

Hi Venkat,
According to the error message, I guess that the error occurred when you previewed the report in Business Intelligence Development Studio (BIDS).
Based on my research, I think it may be a Window Layout issue of Visual Studio. Please try the steps below:
Click “Window” button from the toolbar ribbon.
Click “Reset Windows Layout” option.
Click “Yes” to finish the operation.
The following thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/90949d68-a611-467c-b438-be97b8ab250b/attempted-to-read-or-write-protected-memory-this-is-often-an-indication-that-other-memory-is
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Please read this prior to posting in this area.

Similar Messages

Maybe you are looking for