Please review proposed setup.
Hey, just wondering if someone can look over the setup i'm thinking about putting together. Basically, I'm going to upgrade myself and give my GF my 2500+/A7N8X.
- MSI K8N Neo2 Platinum Motherboard
- Athlon 64/3200+/Socket 939/Winchester 90nm Core
- 2x256 Mushkin LVL II Black
- Maxtor 200 GB SATA HD
- ATI Radeon 9800 Pro
Anyone see any issues, possible conflicts, or suggestions?
I guess there are a couple things I'm unsure about. For one, I've heard of some 939 motherboards not taking the 90 nm chips until the BIOS was upgraded. Is this still an issue? I sure dont have a second, older A64 lying around to take care of that.
I guess since this will be my first A64 setup (but definately not my first build), I'd appreciate other people looking over it.... people who probably keep up with the hardware more than I get to anymore.
Well, I guess my biggest concern was the 90 nm/Bios issue. I did quite a bit more research both here and elsewhere and from what I can tell, the issue was present in the earlier BIOS versions, however, any recent BIOS version will POST just fine, allowing the user to upgrade the BIOS from there for any perfomance increases.
As far as the RAM.... I'm using the 2x256 cuz I already have it. another 512 total is DEFINATELY on my wish-list, perhaps in a month or two. The only new parts in the setup are the mobo+proc and the HD.
I'm actually upgrading my computer, handing down my 2500 to my gf, and using her 1800 to upgrade my server (which right now is an AMD K6-3 450!) Overall, I'm confident things will be cool.
Similar Messages
-
Error: Ship to/Bill To Address is Invalid. Please review the Address Setup
After Upgrading to 12.1.3, Orders are failing during Import/Scheduling with "Error: Ship to/Bill To Address is Invalid. Please review the Address Setup" whenever Tax Engine is called. And this is happening for only specific addresses (that are vaild). I will appreciate any experience/suggestion on this regard.
Thanks,
Dipanjan--- Here's a skeleton structure of the PLSQL that you should use----
l_location_rec APPS.HZ_LOCATION_V2PUB.LOCATION_REC_TYPE;
-----Use this to find a good address from existing TCA in Oracle, by passing only the zip code:
SELECT hgi.identifier_value,hg.geography_element4_id
,hg.geography_element1 country
,hg.geography_element2 state
,hg.geography_element3 county
,hg.geography_element4 city
,hg.geography_element5 postal_code
FROM apps.hz_geographies hg,apps.hz_geography_identifiers hgi
WHERE hgi.geography_id = hg.geography_element4_id
AND hg.geography_name = :pp_zip_code
AND hg.geography_type = 'POSTAL_CODE'
AND primary_flag='Y';
-----The Update the Location
l_location_rec.CITY := rec_get_geo_elements.city;
l_location_rec.COUNTY := rec_get_geo_elements.county;
l_location_rec.STATE := rec_get_geo_elements.state;
hz_location_v2pub.update_location (p_init_msg_list => FND_API.G_TRUE,
p_location_rec => l_location_rec,
p_object_version_number => l_object_version_number,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data); -
EPrint/Apps Connectivity Troubleshooting - Please Review
ePrint & Print Apps Connectivity Troubleshooting Steps – Please Review before posting
This information below is provided to help you to resolve web services connectivity problems to enable your printer to print with ePrint, launch/use Print Apps, enable web services, print your web services info sheet, or add your printer to your account on the HP ePrintCenter. Only items that have actually been shown to resolve customer issues have been included in the list.
For best results review and apply the applicable steps below in the order presented before posting a request for help in the forum, so that forum members who respond to your post can provide the best possible assistance.
Also see this post (http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Start-here-Web-Services-How-To-and-Troubleshoo...) for additional “how-to” and links to important web services information, FAQs, and Help content.
Before applying the troubleshooting information below:
If you receive an “Invalid code” message when you try to add your printer to your HPePrintCenter account, but aren’t having any other problems using ePrint and Print Apps, you most likely only need to reprint your web services info sheet from your printer. Your printer's claiming code that is printed on the info sheet can only be used to add your printer to your ePC account for 24 hours after printing the info sheet. Reprinting the info sheet doesn't change your claiming code, it just re-enables your printer to be added to your ePC account for another 24 hours. See here for the steps to re-print your web services info sheet.
If you enabled Web Services on your printer but the Web Services info sheet containing your printer’s claiming code did not print, your printer has not fully completed its web services registration and will not print ePrint emails or print app content. In this case you will not receive any error messages on the printer and you can view your printer’s email address on the printer front panel display. If your web services info sheet does not print within five minutes of enabling web services, try removing and enabling web services again. If your Web Services info sheet still does not print after re-enabling web services, you will need to wait and try again later. If you do receive error messages when trying to enable web services, continue to the web services connectivity troubleshooting steps below.
If you have ePrint emails that aren’t printing, please first ensure you confirm your emails meet ePrint format/attachment requirements. Review the ePrint email requirements in the ePrint FAQ/Help on HP ePrintCenter at www.hpeprintcenter.com. You can also check your printer’s connectivity status and ePrint job list on HP ePrintCenter if you have created an account there and added your printer. (Always use the “Refresh” button on the ePC page, not your browser refresh button, to view updated printer connection status on the HP ePrintCenter.)
A. Easy steps that can be surprisingly helpful – try these first:
Verify your network’s internet access is working – on a computer connected to your network, use a web browser like Internet Explorer or Firefox to view a web page. If you can’t access the internet your internet service provider may be having a service issue that is affecting ePrint/Print Apps.
Go to HP ePrintCenter and look in the News section (http://h30495.www3.hp.com/news/ ) to see if there are any service status updates. In some cases, you might just need to wait a little while and try again.
Turn wifi off and then on again on your printer and wait for a minute for your printer to reconnect to your network
Reboot your printer - turn power off and then on) and wait for a minute for it to reconnect to your network
Reboot your router - remove the power cord from the back of the router, wait a minute, and then plug it in again and wait for at least a minute for the router to power up and all your devices to reconnect.
B. Check your printer’s IP address to confirm it is connected to your network.
Verify that your printer has a valid IP address (for example, typically 192.168.x.x on a home wireless network) by viewing the network settings screen in the Networking or Wireless menu on your device’s front panel display, or by printing a Printer Status Report (usually found on the Tools menu). If your printer does not have a valid IP address re-run the network setup process for your printer. For more help with setting up or troubleshooting your HP printer’s connection to a wireless network, go to http://www.hp.com/go/wirelessprinting
C. Confirm that both your printer and router have up-to-date firmware:
Having up-to-date firmware on your printer or router is important to use web services.
Check to ensure you have the latest firmware (FW) for your printer by checking for product updates, usually found under the “Web” or “Preferences” options on your printer’s menu. If your printer finds an update but is unable to complete downloading/installing it, ensure your router FW is up to date and try again. If your printer continues to fail to complete the download of an available FW update, continue to “E. Set a Manual IP/DNS Server” below.
Check to ensure that you have the latest firmware for your router – review your router documentation/help (or the router manufacturer’s web site) for information on how to check for and install firmware updates.
Resolve temporary connection failure after printer firmware upgrade
Some printers may experience connection failure after firmware upgrade. This is because the printer reboots itself after firmware updates and needs to re-establish network connection.
Check to ensure the printer has been given a valid local IP by your router (eg. 192.168.x.x if DHCP is used) before trying to access print apps or using ePrint. You can see your printer’s IP address by going to the printer’s Wireless or Network setup menu.
If you don’t see an IP, you may have to restart the printer. In some cases, you may have to remove and re-enable web services to re-establish your connection.
Refer to the FAQ & Help section on HP ePrintCenter for more information on how to remove and re-enable web services from your printer.
Allow your printer enough time to reconnect to your network after you try any of the steps above, before you try ePrint or Print Apps again.
D. Remove and Re-enable Web Services and Restore Factory Defaults
Remove and then re-enable web services on your printer. If the web services info sheet does not automatically print within a few minutes of re-enabling web services, web services has not been fully enabled on your printer. You may need to wait and remove and re-enable web services again in few hours to allow the issues affecting your printer’s communication with the cloud servers to clear up. Until a web services info sheet prints out your web services registration is not complete. Complete the steps below while your printer is connected to the Internet.
Photosmart: The Remove Web Services option is available either under the Setup>Wireless>Web Services menu option, or the Setup>Web option, or via the ePrint icon on the printer front panel.
On the eStation select the Menu button on the eStation display (to the right of the Home and Back buttons at the top left when the display is docked on the printer); Select Settings; Select "Web Services”; Select the “Web Services” checkbox.
Officejet: Use Setup > Web Services Setup > Restore Factory Settings to remove Web Services from the printer.
LaserJet: Print a configuration page from your printer to locate the IP address. Open a Web browser and type the product IP address into the address line. The HP-embedded Web Server will open. Click the HP Web Services tab. Select the option to remove Web Services.
2. Restore Factory Defaults on your device. If removing and re-enabling web services does not resolve the problem, restore factory defaults on your printer and try again. The factory default option is usually found in the Setup>Tools menu on your printer. Do the following on your device:
Remove/Disable Web Services
Restore factory defaults/settings (depending on the printer this is found under the Setup>Tools menu, or the Setup>Web Services menus, but varies by printer)
If prompted, re-do initial setup of your device and add it to your network
Re-enable Web Services
Once the Web Services information sheet is printed, use the printer claiming code to add your printer to your account on ePrintCenter
E. Set a Manual IP/DNS Server settings on your printer
Setting a manual IP address/DNS Server on your printer will resolve web services connectivity issues that can occur on some networks with some routers. Note: Setting a manual IP/DNS Server may be particularly helpful on networks using DSL/VIOS routers.
Please read the instructions below completely before applying them. You should not attempt these on your own if you don't understand networking basics. Most of us have a "techie" buddy/friend/family member...if you're not comfortable this might be a good time to call him/her, or contact HP support to assist you.
Before you begin, first remove Web Services from your printer if it has been enabled. (See section D. 1. above.) Removing web services will remove your printer from your HPePrintCenter.com account (if you have previously set up an account and added it). When you re-enable web services after completing these steps you will have a new ePrint email address and need to add your printer to your ePC account again.
How to set a manual IP address/DNS Server on your web-connected printer:
Print a Network Configuration Page from the printer front panel. On some printers this will be under Wireless>Wireless Settings, and on other models use the “Print Report” option from the Wireless status screen accessed from the wireless icon on the printer home screen. Note the printer's IP address that is listed in the IPv4 section of the report. On most printers you can also see the printer’s IP address from the Wireless menu, or on the Wireless status screen.
Type that IP address into your browser address bar (where you would normally type a web page URL) and hit enter - this will load the printer's internal settings page (also known as an Embedded Web Server, or EWS)
Select the “Network” or “Networking” tab (the label varies depending on printer model) from the tabs along the top of the screen in the EWS
Depending on your printer model, the next step(s) will vary:
Select the “IPv4” option from along the left side of the Networking screen
or
Select the “Networking” option from the left side of the screen
Then select the “Network Address (IP)” option from the left side of the screen
The screen you end up on should be the “IP Address Configuration” screen. That screen allows you to choose an Automatic or Manual (i.e., fixed) IP address for your printer, as well as Subnet Mask and Default Gateway values. You will use this screen to set a Manual IP address and DNS Server for your printer.
To continue:
Select the radio button next to “Manual IP”
Select the “Suggest a Manual IP Address” option below the IP address fields. The Manual IP address fields will automatically populate with suggested values after a few moments.
Select the “Manual DNS Server” radio button in the DNS Address Configuration section
Enter the address just entered in the “Manual Default Gateway” into the “Manual Preferred DNS Server” field. Leave the “Manual Alternate DNS Server” entry blank.
Carefully double-check the values you entered to make sure they are all correct.
Click 'Apply'
Save any open documents and close any web browsers on any computers
Turn off the printer and unplug the router.
Plug in the router, wait for it to start up and for status lights to settle down (approximately a minute at least), then turn on the printer.
After the printer has connected to your network, enable web services on your device, accept any firmware updates that may be offered, and add your printer to your account on HPePrintCenter.
In some cases you might need to add the printer to your computer’s Printer/My Printers folder again, after you set the new manual IP address. If you have problems printing to your printer, simply use the option to add a printer, select the Networked printer type, and complete the add printer wizard. You will not need to reinstall any printer software on your computer.
F. Check for port/proxy issues
Note: These issues are not commonly experienced, and primarily affect users in business environments.
ePrint and Print Apps require access to establish connections out to HP servers via ports 80, 443, 5222 and 5223. Primarily in some business environments, network administrators may block devices initiating communication from within the firewall on some of these ports. Please check with your network administrator or Internet Service Provider to make sure those ports are not blocked on your router/firewall for outward-bound communication initiated by your printer.
Important Note: We are not suggesting that you set up port forwarding on your router to open these ports for connections initiated from outside your network to your printer. That is not required and could be a security risk for your network.
2. In some business environments the local network which the printer is connected to may require a proxy setting to access the Internet. Check with your IT Administrator or Internet Service Provider (ISP) for proxy setting if necessary. Most ISP for home users do not require proxy configuration for Internet access. (Note: HP web connect printers currently do not support secure proxy servers)
To set a proxy on an Officejet All-in-One, see this document: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02524629&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
If the steps above have not resolved your ability to use ePrint/Print Apps, please submit a question in the here in this support forum, confirming you have completed this connectivity troubleshooting and identifying the error/problem you are experiencing. Thank you.
I am an HP employee.
This question was solved.
View Solution.eprint has to be the biggest boondoggle ever created. HP should be embarrased by their incompeetance - been two weeks and I have not been able to access the feature. Told a number of times (after LONG wait on phone) that there were problems with their servers and to try again in a day or so - very helpful and professional. Feel like I'm dealing with "Dogbert" customer support in Dilbert cartoon world. Can't log on using snapfish or any other means. I guess I just have to give up and recognize that HP just doesn't care - false advertising and promotion. No satisfaction.
-
I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In". The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue. Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue.. Stuck...The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!
If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.
-
Apple id has not been used with the itunes store-please review your account information
Hello,
Good Day.
I bought apple ipad 2 and need help.
I registered online and after this i am getting the error.
apple id has not been used with the itunes store-please review your account information
Can any one help me in this issue.
Thanks&Regards,
Shankar.MThis is information you you have created an apple id.
To use this apple id for the itunes store, you have to agree to the terms and conditions and enter in the requested information before you can use the store.
When you create an apple id it does not mean you gain access to all apples features, you would need to create a :-
Itunes id
Facetime id
Game centre id
imessage id
icloud id
You can use the same email address as each login. but until you agree to each terms and conditions you wont be able to access the services.
This is usually done the first time you access each service and sign in with your apple id.
As to iTunes you need a little extra as they will request to confirm details as to address, etc, with the payment information they can confirm you are actually in that country you are trying to purchase from.
Once you have added the credit card details, you can go back in a set payment method to none and remove the credit card details once you have activated the itunes on your apple id.
Basically this message you are getting is just ADDING the feature of iTunes store to your apple id, and confirms you have not got a iTunes id yet. -
When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
When I click "Agree", It is disabled.
Can anyone tell me why this has happened and how to resolve it?
Please, please, please help.Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
This Apple ID has not yet been used with iTunes.
I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
Either way, count me in on getting annoyed that a week later, this issue has not been fixed. -
Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor ProHello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G -
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Error when Submitting book - Please review your billing information
I get the following error message when I submit a book for printing:
Your account information has changed.
Please review your billing information and approve it.
I went here to review my order status but I did not have any orders:
https://mercury.apple.com/WebObjects/OrderStatus
I reviewed my billing information on the web located here:
https://myinfo.apple.com
And it is correct
Any thoughts?I got the following information from apple - following this fixed my problem:
1. Visit http://myinfo.apple.com and choose your country and preferred language from the pop-up menus. Then log in using your Apple ID and password.
2. Click Address Book on the left. If you see any blank addresses under Shipping Addresses, make the visible address your default, and then delete the blank address.
3. Click Phone Numbers on the left, delete all phone numbers, and save your changes. When you successfully place an iPhoto order, your phone number will be copied from iPhoto to My Info.
4. Check Apple ID, Email, Subscriptions, and Contact Prefs and make any necessary corrections. Save your changes.
5. Now open iPhoto.
6. Select a photo and choose Order Prints from the Share menu.
7. Click Account Info and sign in using your Apple ID and password. If you are unable to log in, try changing your password in My Info using the directions in step 1 above. Then return to step 6 and try again.
8. Click Edit Shipping and choose Add New Address from the Address pop-up menu.
9. Add the desired address into the fields, making sure to create a new label, such as "Home." Then select "Make this my default address" and click OK.
10. Now delete any other addresses listed by selecting them and clicking the Delete This Address button. You should now have only your default "Home" shipping address left.
You should now be able to submit your iPhoto order successfully. If the difficulty persists, please reply to give me the exact error message you see. I will do my best to help you resolve the issue. Thank you for your patience. -
Tyring to sign in to iTunes store viz windows XP...I get to entering my ID and PWD and then the message pops up "This Apple ID has not yet been used with the iTunes store...please review acct. info." HELP! I have cleared DNS, checked proper date & time and deleted SC folder from programs like support suggested--all to no avail.
The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
Hi All,
We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
Environment:
SharePoint 2003 Service Pack 3
SharePoint 2003 Message :
Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
Thanks in Advance
Ravishankar Maduri MCTS,MCPD,MCPhow large are your site collections and content databases?
sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
my Apple id is not working on itunes store....itunes reply (please review your account information.....) And Demanding Credit Card Information.....But I dnt Have Any Credit Card......
For the CC type, select None and verify your name and address.
-
some one can help me please
i have no idea what i must to do.
an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.The Exception Handler gave all the info that you need. No need to print the whole stack trace.
The exception handler says
Exception Details: java.lang.IllegalArgumentException
TABLE1.NAME
Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
What do you have? -
A report question please review !!!!!!!!!!!!!!!!!!!!!!
Hi
I am wring a report and I have a question about few things.
I am selecting some data from different tables, some of the
columns are: days_past_due (which is a calculated column, it's =
to sysdate -due_date) and I have another column balance_due, Now
I want to have few other columns like (31-60,60-90,90-180) as
buckets and these should be calculated also like for example if
it's for 1-30 days I want to sum up the balance_due columns if
the days_past_due is bettwen 1-30 , Please review if you can help
alphaPlease do the following:
1. Add two columns "Account Name" and "- Account Document"."Document Name" to the report.
2. Create the following formula on "Account Name" column
CASE WHEN ("- Account Document"."Document Name" LIKE '%string1%' AND "- Account Document"."Document Name" LIKE '%string2%' )THEN "Account Name" ELSE '0' END
3. Put a filter on "Account Name" != 0 (Filters out all the Accounts which do not have the Document Name like in string1 and string2.
Hope this helps and please mark it if it does.
Maybe you are looking for
-
Samsung 640GB hard drive issues
Hi Everyone, This is my first post on these forums, but have browsed them lots before and have found quite a bit of help. Unfortunately I wasn't able to find a difinitive solution and was hoping someone might have an answer for me. In November of las
-
I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?
-
Cool new lavalier Mic from RØDE
OK, these people have got it together. I already use the RØDE Podcaster for recording at my desk. I have a wired lav mic, but it is a hassle using it since, as I said, it is wired. The cost of a decent wireless mic is prohibitive. Now RØDE has come o
-
Upgrading from 54g to a 160N router
I have a home network sharing files and printers. I have had a wrt54g wireless router for the severla months and I have not had any major issues with the internet or home networking. I moved to a new home with 2 floors. I noticed that the signal s
-
Dear Team Is there any way to get the SQL Queries for UCCE 8.5 and run it from Sql Server , also how we can get a report to calculate abandoned calls with percentage. Please advise we are face data calculation issue with exiting CU