Please try this with your Internet Explorer.

Hi,
I have the feeling, that the internet Explorer cant show applets, if they are saved in a local folder. Can you please try this with your IE? Compile this Applet:
import java.applet.*;
import java.awt.*;
public class HelloWorld extends Applet
public void init()
public void stop()
public void paint(Graphics g)
g.drawString("Hey hey hey",20,20);
g.drawString("Hellooow World",20,40);
And then create a html in the same folder:
<HTML>
<APPLET CODE=HelloWorld.class WIDTH="400" HEIGHT="250">
</APPLET>
</BODY>
</HTML>
You'll see that it'll work fine with Netscape and the Appletviewer, but NOT with IE . Can someone confirm this? Does anybody know why?
I got this applet from http://www.realapplets.com/tutorial/HelloWorld.html . And if I visit this site online, my IE shows the applet correctly. It just wont show any locally saved appelts. Please help!
thanx

Why doesnt nobody read my question? I have the plug
in and I said, that IE shows all applets which are
online!!!! Didnt I say that? And if it shows them,
then I must have a plug in, right? I guess nobody
knows the answer to my question.Hi There!
This might be the same problem I had run across, though I don't fully understand it, if anyone else can explain it further afterwards.
My problem was very similar in that I could compile and view the applets on my primary pc fine, but if I tried pulling it up from the almost-local shared folder of the other PC on my Lan, or even fully copied into the other drive, I could not view it(Neither could I view it loaded from the web with the other, though my primary worked fine). I used IE exclusively, so I don't know if this would effect netscape at all.
The fix I found after searching through about 17 pages of posts for a clue in these forums was this:
javac -target 1.1 filenameAfter I recompiled with the -target 1.1 the applet's ran perfectly on the other pc.
Hope this helps,
-Tom

Similar Messages

  • SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.

    Hi,
    I have VS2013 update 4 and IE11 installed. When I try to sign in through VS I get the following error.
    SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.
    I have checked and JAVASCRIPT and cookies are enabled.
    Any help is appreciated.

    Hi Sath12,
    If possible, I suggest you reset IE settings.
    Please lower the security level. Then I added the site like https://*.visualstudio.com/ to the trusted zones. Test it again.
    I have met this issue before which was related to the IE settings or the account issue.
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/290948f6-b4ca-41e3-9888-91fbbc71cdeb/cannot-register-sign-in-from-vs-express-2013?forum=visualstudiogeneral
    A connect report still shared some information about it:
    https://connect.microsoft.com/VisualStudio/feedback/details/811860/vs-express-2013-for-web-browser-is-security-restricted-or-javascript-is-disabled
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

    I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
    At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
    I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
    I have reset IE9. Same problem.
    I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
    If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
    This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
    Any suggestions for how to solve this (other than using software rendering)?

    Thanks again for your reply. I appreciate the time you have taken to respond.
    I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
    I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
    This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
    The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
    1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
    2. Use another browser - I have no problems with either Firefox or Chrome

  • This application requires Internet Explorer 6.x or Greater to Run

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1044281 /questions/1044281]''
    Any solutions for below message?
    "This application requires Internet Explorer 6.x or Greater to Run"

    Where are you seeing this message? You didn't give any information with your post.

  • Did you know that your Internet Explorer is out of date?

    Hello there,
    when i access this site http://www.sickkids.ca/ , I am getting this error message, please advice.
    Did you know that your Internet Explorer is out of date?
    To get the best possible experience using our website we recommend that you upgrade to a newer version or other web browser. A list of the most popular web browsers can be found below"

    It's probably giving you that warning because your Firefox is very out of date. Please read [http://www.getfirefox.com www.getfirefox.com] to see how to update to the latest version of Firefox (14.0.1 right now)

  • Problems with getting internet explorer on my mac with virtual box 4.3.20, who can help?

    This is what I did:
    1) downloaded and installed virtual box 4.3.20
    2) copied
    curl -s https://raw.githubusercontent.com/xdissent/ievms/master/ievms.sh | IEVMS_VERSIONS="11" bash
    in the Terminal (for IE 11 only). I got this from the link: Internet Explorer for Mac the Easy Way: Run IE 7, IE8, & IE9 Free in a Virtual Machine
    3) that is where things went wrong, see attached image for the error I get (after a long time) in the Terminal
    Tried it twice but every time the same problem.. I hope someone can help me!

    The error means that your download session was interrupted. There could be a problem with your Internet connection or a problem with the remote server providing the download. If you otherwise have no trouble with Internet, I suspect the later.
    But why would you want to bother downloading someone's virtual machine to run MS Internet Explorer? Not only is there a real security risk since you don't know what the VM or installation script is doing, but if the VM is running MS Windows, then the person providing the software is breaching software distribution and copyrights laws, and so will you, using the software.
    Btw, have you read any of the comments? Do you really want to download 20GB? (nonsense)
    If you need IE and VirtualBox, simply create a new VM and install MS Windows using a regular copy and enter your license code. There is also no need to install different versions of IE, since IE can be configured to run as a prior version.
    However, there is no need to install and run MS Windows to run IE. There are products that provide free Windows API to let you run PC applications as they were Mac applications without installing Windows, e.g. Wineskin, Wine Bottler, or commercial solutions, such as Crossover.
    See http://www.wikihow.com/Install-Internet-Explorer-on-Mac-Using-WineBottler

  • Can someone please try this and see if this works for them...

    Hi there
    I cannot get the following to work but according to the mainstage manual this should work. Could someone please try this and see if this works:
    a. Create a new concert based on any template. Delete all patches except one (lets call this remaining patch X).
    b. Add a Bass instrument channel strip at the Concert level (by selecting the Concert in the patch list and then hitting the '+' button on the right within the Channel strips and selecting Software Instrument).
    c. Set the Concert level Bass instrument channel strip to play only on the first 2 octaves or so, by setting the Key Range parameters appropriately.
    d. Click on the remaining patch X. You should see that it automatically has your bass instrument as a split on the left hand octaves on the Mainstage keyboard displayed. So everything good so far.
    d. Now save the concert with any name.
    e. Close the concert.
    f. Re-open the same concert again. Click on the patch X. At this point I would expect the Bass instrument to be showing on the lower octaves. This does not happen for me.
    I've spent a couple of days trying to see if I'm doing something wrong, but cannot figure this out. Please please someone let me know the outcome of trying the above. And if I'm doing something wrong to get this to work, kindly let me know.
    thanks
    Ziggy

    Thank you all for your suggestions and taking the time to try this out. I think I've sussed out what the problem is.
    If you create them like Thor mentions that always seems to work. Thor, I don't understand what you mean by hitting the "+" in the channel strip area. Doing this creates an additional channel strip and not a new patch.
    What I was trying to do before was to include all patches in a set as well. So I have my Concert, then a Set, then patches within my Set. If I added a Bass at the concert level, it looks like this was then propagated to all my patches in my set. But when I closed Mainstage and re-opened, the bass wasn't there at the Set or patch level.
    I really think there is a bug with Mainstage, where if you have Sets and patches within sets, any instruments at Concert level do not get inherited by the Set, patches in the set. I've tried this a few times and tried without using Sets. It always seems to work without Sets.
    So the lesson is not to use Sets, if you want to share concert level intruments.
    Once again, thank you guys for trying this out.
    Ziggy

  • With the Internet Explorer maintenance no longer in IE9 and above

    Hi
    I heard someone that With the Internet Explorer maintenance no longer in IE9 and above version of IE.
    Is this True ?
    As I have lots of GPO of favorites configured in IE maintenance and other as well..
    Will they be not supportive any more.. 
    If yes, what is the other solution for all my IE maintenance settings ?

    IE maintenance has been deprecated with Group Policy Preferences (GPP), Administrative Templates (.admx), and the Internet Explorer Administration Kit 11 (IEAK 11).
    More information:
    http://idanve.blogspot.co.il/2014/07/configure-internet-explorer-10-or-11.html
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • (Problem) Grey empty Word window shows up while opening .doc or .docx files with virtual Internet Explorer 9

    Hi,
    First i'll explain what i did.
    I've Thinapped Office 2010 Professional Plus SP2 with an Internet Explorer entry point. (Thinapp version 4.7.3)
    Made some changes in the registry so .doc and .docx files will open in the virtual IE browser.
    Here are my changes made to the registry:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.Document.8]
    "BrowserFlags"=dword:80000024
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.RTF.8]
    "BrowserFlags"=dword:80000024
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.Document.12]
    "BrowserFlags"=dword:80000024
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.DocumentMacroEnabled.12]
    "BrowserFlags"=dword:80000024
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\AttachmentExecute\{0002DF01-0000-0000-C000-000000000046}]
    "Word.Document.12"=hex(0):
    "Word.Document.8"=hex(0):
    Now i have this problem:
    When opening a .doc or .docx file in the browser a ' download bar' appears.
    My document opens in the browser as expected but, at the same time an empty grey Word window appears at the background.
    The grey window shows not all the time when opening a .docx or .doc file , this is whats so strange about it.
    Sometimes when i open the .doc or .docx file it opens without the grey empty word window. It seems like it's happening randomly.
    I also tested it out with .xlsx files (Excel) but this go's all well.
    Before i forget, this all runs on a Windows 7 Enterprise environment.
    Does anyone know what causes my problem, or can anyone help me?
    Kind regards,
    Martijn

    Hi,
    First i'll explain what i did.
    I've Thinapped Office 2010 Professional Plus SP2 with an Internet Explorer entry point. (Thinapp version 4.7.3)
    Made some changes in the registry so .doc and .docx files will open in the virtual IE browser.
    Here are my changes made to the registry:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.Document.8]
    "BrowserFlags"=dword:80000024
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.RTF.8]
    "BrowserFlags"=dword:80000024
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.Document.12]
    "BrowserFlags"=dword:80000024
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Word.DocumentMacroEnabled.12]
    "BrowserFlags"=dword:80000024
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\AttachmentExecute\{0002DF01-0000-0000-C000-000000000046}]
    "Word.Document.12"=hex(0):
    "Word.Document.8"=hex(0):
    Now i have this problem:
    When opening a .doc or .docx file in the browser a ' download bar' appears.
    My document opens in the browser as expected but, at the same time an empty grey Word window appears at the background.
    The grey window shows not all the time when opening a .docx or .doc file , this is whats so strange about it.
    Sometimes when i open the .doc or .docx file it opens without the grey empty word window. It seems like it's happening randomly.
    I also tested it out with .xlsx files (Excel) but this go's all well.
    Before i forget, this all runs on a Windows 7 Enterprise environment.
    Does anyone know what causes my problem, or can anyone help me?
    Kind regards,
    Martijn

  • Firefox is set as the default browser, but if I click a link in MS Word, the link is opened with MS Internet explorer. Why?

    Firefox is set as the default browser, but if I click a link in MS Word, the link is opened with MS Internet explorer. Why?

    What version of Windows and Office is it? I had this issue with an older version of office and Windows XP. Basically, MS are using their browser (IE) because it's their software (MS Office). If you go to options in MS word though, you should be able to find an option to set the default browser to open links.

  • Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and  computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance.  OK

    Has anyone seen the following on their WP?
    Message from webpage
    WARNING: Time Warner Cable Customer –
    Your Internet Explorer browser and
    computer may be compromised by
    security threats. Call 844-600-6224 now for
    IMMEDIATE assistance.
    OK

    This sounds like a virus or malware program that has made its way onto your computer.  I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system.  If this doesn't work, I would suggest  you use Microsoft's Malware Removal Tool.  You can download it at the link below.   Hope this helps.
    http://www.microsoft.com/security/pc-security/malware-removal.aspx

  • Organizer elements 11.  Problem with your internet connection

    I am trying to access facebook and Flickr via the Organizer with elements 11.  I went to preferences and cleared the oline services, when I try to refresh the partner services I am greeted with the error " there is a problem with your internet connection, check your firewall settings" .
    Windows 8, updated.  I tried disabling the firewall.  I have also tried making sure permissions are set up to allow all adobe products access through the frewall when it is enabled.   No other network managment services or virus scanners installed.  just default 64bit windows 8.
    I am currently left with no partner services; facebook, flicker, picasa, etc....   I could reinstall organizer i guess to get the default services back...
    I found discussions on the web but none with a solution. http://forums.adobe.com/message/4035670
    Any help would be great

    I apologize for the delay.  An update was released shortly after I posted the question that resolved the issue.  Thank you for your assistance though.  As soon as I read your advice I went to my laptop to follow your instructions.  Upon opening photoshop I was prompted with an adobe update message.  After the update the issue was resolved.  Again, sorry for not updating the situation.

  • I am not able to login the facbook. It is displaying the message ;Cookies are not enabled on your browser. Please adjust this in your security preferences before continuing.

    I am not able to log-in the facebook.
    It is displaying the message that "Cookies are not enabled on your browser. Please adjust this in your security preferences before continuing."

    [[Enabling and disabling cookies]] should work... if it doesn't, you may try
    # [[Websites say cookies are blocked]] and
    # if 1 doesn't help, then possibly see [[preferences are not saved]] if that's the case.

  • TS1424 Credit card processing is temporarily unavailable. You may continue to browse the store. Please try to make your purchase later.

    Credit card processing is temporarily unavailable. You may continue to browse the store. Please try to make your purchase later. Any One else having this Issue ?

    I was having this exact issue when I was set up to use PayPal as my payment method. I fixed it by -
    1. going to my iTunes account and selecting None as my method of payment, then clicking Done
    2. confirming this on my account page - which then said Add (or Set up, I can't remember) a Credit Card
    3. on the Add a credit card page, I again set up the exact same PayPal account I had before.
    4. I was then taken to the PayPal website to confirm that I wanted to use my PayPal account for iTunes purchases, and finally
    5. I was taken back to my account page in iTunes, which looked exactly the same as before BUT...
    The next time I tried it, my purchase went straight through! (And this was less than 5 minutes after I'd had the "Credit Card processing is temporarily unavailable" message.)
    YMMV, but I guess a similar revalidation process would work for credit cards too.

Maybe you are looking for