PLS-320 error. Column named the same as the data type.
Howdy all. I have a table called BLOBS. It is made up of two columns - B_ID and BLOB. The data type of the BLOB column is the BLOB data type. This is causing me problems when using this table in a PL/SQL procedure. The error that I get is below. The error goes away if I rename the BLOB column to something other than BLOB, but I do not want to do this. I have migrated this database (with about 1000 stored procedures) from SQL2K. Are there any workarounds for this problem other than renaming the column?
jeff w
Line # = 20 Column # = 2 Error Text = PL/SQL: SQL Statement ignored
Line # = 43 Column # = 21 Error Text = PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
Thanks. I know it would be better to rename it, but that is currently on the low end of my options. As I stated, I have about 1000 stored procedures in my SQL2K database - many of them access this BLOBS table and this BLOB column.
I am given the error even without trying to access the particular BLOB column, though. If I just include the BLOBS table in the FROM clause of a query I get the error.
Similar Messages
-
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SVI just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected] -
Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SVI just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected] -
Getting Error while accessing the data using odata service
Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars -
Error, while pushing the data from Oracle to MSSQL.
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view. -
5200: Error executing query: The data form grid is invalid.
Hi,
I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
can any please help me.
btw, i am using Hyperion Planning 9.3.1
Thanks,
BIMSHi
You probably deleted some members from outline that are used by report
I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
Regards
Alexander
Edited by: Softperson on 19/8/2010 17:38 -
Error occurred in the data selection,If i do Repeat, then it is working fin
Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi. -
Error in data loads-Error occured in the data seletion
Hi,
We have to do an init load for Period 10 from data source 0EC_PCA_3.
When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
The load failed with error mesg IN EXTRACTION PART:
1) syntax error in RSCDELTA
2) Error occured in the data selection -RSM 340
REQUEST part in monitor screen is green.
TRANSFER part in monitor screen is green
EXTRACTION shows:
Data request received ---green
Data selection scheduled -
green
Error occurred in the data selection -
RED
Processing (data packet): No data ---RED
We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
How to rectify this and do loads to the target successfully.
Please suggestPlease check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
Thanks..
Shambhu -
How do you restrict the number of table columns on the data tab?
I have a table with 50+ columns. Is it possible to restrict the list of columns on the data tab to say 5 columns as I'm only interested in seeing/updateing the data for these 5 columns. You can restrict the number of rows using the filter but not the columns. Is there some other way seeing an updateable "view" of the table? I suppose you could create a number of views and edit through them but there are too many combinations.
regards
Paul PI don't know of any way of reducing the number of columns that display in the Table data grid.
However, you can rearrange the columns to have the five columns you want to edit as the first five. With fifty columns, even this would be some effort to find and drag them to the left of the view, but it should give you the five columns you want to update on the window at the same time. -
Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN
Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak -
How to solve "error occurred in the data manipulation engine"? 64bit Windows 7
Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
RiaIn case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file -
Error:First create the valuation-type-independent data:BAPI MM
Hello all,
I am getting above error (First create the valuation-type-independent data) when i sent the BWTAR field to BAPI_MATERIAL_GET_ALL and material data is not getting fetched.
Please guide to resolve the issue.
Thank you.
Edited by: sanjivrd on Nov 30, 2009 10:08 AMHi all,
I'm using BAPI_MATERIAL_SAVEDATA for opening all views of material. I I try to open COST and ACCOUNT views, still having same message error "First create the valuation-type-independent data".
Also If I don't open ACCOUNT and COST views, the creation works fine. After in updating material, I set up the VALUATIONDATA / X structure but the error is the same.
We use "split valuation on material" and the Valuation Type is a mandatory field.
Any help?
Thanks in advance.
GB -
MSS 60.1.19 - Salary Development iView - Internal error wh reading the data
Hi guys!
I face the problem of an iView Salary Development. I get error: Internal error while reading the data. I found a thread with the same problem, but there is no solution. Did anyone of you solve this problem?
Thanx for answers!
PeterHI Peter
I have the ivew salary development wroking more or less. There are some problems with totals from wage types including IT14 & 15 which I have reported and waitnig for response frmo SAP..... but at least IT0008 is working ok on it.
I didn't get this message so let me know how to help...! Ha<ve you done the config for the iview yet?
helen -
Error while extracting the data in R/3 production system,
Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issueIt´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus
Maybe you are looking for
-
Performance Issue in using Oracle Rules SDK!!!!
Hi, I am using Oracle rules SDK. I have created a dictionary and declared 9 global variables in it. Now, before testing my ruleset in my code, I populate those variables and update datamodel. Date startDate = new Date(); try this.dataModel.update();
-
Can i download to ipod using an Itunes sharing computer?
Hellooooo ~ My original Itunes install is on a Mac 10.3.9. My Itunes sharing computer is a Windows XP. The sharing over the local network seems to be working fine. I have not yet purchased an IPOD. QUESTION: Will I be able to get my (Mac sourced) son
-
in Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?
-
Order of servlet mapping in web.xml
Hello, is the order of multiple <servlet-mapping> in web.xml important? Or it doesn't matter in which order they are declared? For example, if i have two controllers, one is <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.weba
-
ITunes shuts down whenever I try to open a movie or tv show.
Trying to fix a friends machine so they can let their kids watch movies on their computer again. After looking at it I am stumped. Each time I open iTunes and then attempt to open movies or a tv show, the screen acts like it is going to open and the