Pls, help me , my ipad is disabled as a reult of constant inputing wrong security code by my child on my ipad, i was asked to connect to itunes. The ipad is disabled and cannot do anything to allow me connect to itunes. Pls, What do I do???

Pls, help me , my ipad is disabled as a reult of constant inputing wrong security code by my child on my ipad, i was asked to connect to itunes. The ipad is disabled and cannot do anything to allow me connect to itunes. Pls, What do I do???

This should solve your issue:
http://support.apple.com/kb/HT1212

Similar Messages

  • I uploaded my photos to my computer.  I now have all my albums and photo library on my phone.  I cannot get the off my phone and cannot take pictures on my camera.

    I uploaded my photos to my computer.  I now have all my albums and photo library on my phone.  I cannot get the off my phone and cannot take pictures on my camera.

    Connect your phone back and resync except this time uncheck all the albums from itunes when you sync. This will take all the albums off your phone and clear up space on your phone.

  • My iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution

    my iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution

    You need to place the device in recovery mode ...
    f you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Instructions for putting the device in recovery mode > iOS: Unable to update or restore
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present

  • I have lost my iBooks and iTunes and iBooks does not load plus I cannot download anything from my app icon.does anyone know what the problem is.

    I cannot use iTunes or iBooks and my iBooks library is blank although I have purchased books in the past.  Also I cannot download anything from my app icon.  Has anyone experienced this and if so how do I correct.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • TS1702 Cannot download an issue of a subscribed magazine on news stand. The download has paused and cannot midway and every time I click on resume it asks to shut and restart  the app. Done that several times. Even restarted the iPad but the problem conti

    Cannot download an issue of a subscribed magazine on news stand. The download has paused and cannot midway and every time I click on resume it asks to shut and restart  the app. Done that several times. Even restarted the iPad but the problem continues.

    Do a search with Spotlight for ".plist" (without the quotes). In that list (should be very long) there should be a file named com.apple.itunes.plist. Delete that file by dragging it from the Spotlight list to the Trash. Don't worry if you drag the wrong file and delete it, as these are preference files that recreate themselves when you launch an application.

  • My phone i disabled.when i connected it to the pc to restore and update it..my iphone after 5 mins goes restart? plz help me what  should i do

    my phone i disabled.when i connected it to the pc to restore and update it..my iphone after 5 mins goes restart? plz help me what  should i do

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Malvinfromny wrote:
    ... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!!

    Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!! Anyone with same problems? What can i do now?

    What if they say i scratched it by dropping or something (which i obviously dint)? will they still replace it?
    It even has the plastic on it yet..!!

  • HT1414 ipad continues to go to home screen I slide arrow to unlock, it asks if I want to unlock.  Hit cancel and process happens again b4 allowing system to unlock.

    ipad continues to go to home screen I slide arrow to unlock, it asks if I want to unlock.  Hit cancel and process happens again b4 allowing system to unlock.  Not sure if hardward or ios problem. Ant ony else seen this problem?
    Cant afford a new device at this time. 

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Just upgraded to the latest iTunes and cannot delete anything from my iPhone

    Just upgraded to the latest iTunes and cannot delete anything from my iPhone.  I need to delete a playlist to make room for a new one, but Delete does not even show up as an option (nor does the delete key on my keyboard delete anything.

    Could you possibly be more vague?
    If you want help you have to provide details, not just "I can't synch my phone". Why can't you synch?  What error messages do you get?  Give us something.

  • Trying to register iPhone 4. iTunes store says its busy and cannot connect, try again latter.

    Trying to register new iPhone 4 for the first time. iTunes store says its busy and cannot connect. I have tried many times over 2 days but no luck. What can I try.

    Hello,
    Almost a year later and I'm experiencing this exactly situation now.
    I was in the middle of the process of data migration from iPhone 4 to 4S and due to really slow download speed restoring iCloud backup, I interrupted the process and started a new full restore process through USB and iTunes (reset all setting and configurations on the 4S and did a local machine backup of the old 4 and asked to restore from that).
    After a full successful restore process, I'm trying to delete the old iPhone 4 2GB backup in iCloud and the error message saying that "this backup cannot be deleted because its being used to restore another device, or backup is currently in progress".
    Of course I ran out of spece (iPad, old iPhone 4 and new iPhone 4S backups) and I tried everything, disabling iCloud, deleting from my MBP, from iPad, and no success.
    I cannot restore the old 4 and deactivate iCloud backup because I don't have this phone anymore, probably it's already in use by another person.
    PS: iOS6, Mountaing Lion
    Any ideas?
    Thanks

  • Outlook 2010 error - The file is corrupt and cannot be opened

    Hi experts
    Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
    I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
    the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
    Thanks

    Hi,
    You can try using the Fix it tool in the following KB article to fix the issue:
    http://support.microsoft.com/en-us/kb/2387587
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. the computer says that if I "Sync" the iPad will be erase, and become like my iPods. how can I just get my files onto

    I am a first-time iPad owner/user. I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. iTunes message says that if I "Sync" the iPad will be erase, and become like my iPods. If I make a new iTunes account, would the apps be erased when I tried to use it?
    How can I just get my files onto this iPad, and still have the apps that my relative left there for me?
    Thank you.

    iPads sync to 1 computer only.
    All media and apps are tied to the Apple ID that purchased them.
    Without your relatives ID and password, you cannot update any of the Apps.
    I am pretty certain he is also violating Apples terms of service by giving you the apps.

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

Maybe you are looking for

  • Configuration file?

    My airport extreme just updated it's firmware and now all my port mapping settings are gone, and I don't remember what they were exactly...and they were perfect! Where were they stored and can I get them back with Time Machine? HELP!

  • Acrobat Pro X Shared Review email issue

    One of our agency users is having problems sending shared reviews.  When she gets to the final step of sending the shared review the TO: field will not allow her to add e-mail addresses either manually or via the Outlook address book.  This happens s

  • HT1937 Why am I still not able to make a facetime call over my cellular network (sprint) after my iOS 6 update?

    I am not able to make a facetime call after my recent iOS update. It is still saying that I need to connect to wifi when I try to do so. Does not give use cellular option in my general settings.

  • Lsmw-batch input

    Hi all.. Am uploading vendor master using lsmw-batch input method..when there s one record in my flat file its working fine.. But when i give more than one record its throwing some errors and i cant create the session.. can any one help me regarding

  • Trading Partner - Required Field

    Hi Gurus, How can i make trading partner as a required field while posting any JV? And also, i want to put a validation for profit center and Trading Partner. Please revert asap. THank YOu